Widget/Button image

Hello,
I have a problem with Button Widget. I decided to insert a rollover slidelet and on this slidelet I would like to have a button. The only way to insert button is to insert Widget and than select a button. I did it and now I would like to change the layout/view/image whatever u name it. Instead of it I have sth like this:
I don't fully understand what does published folder mean.
I hope u understad all

Hello,
If you do not like the images already provided with the Button widget, you can choose your image. But when publishing the CP-file to SWF (with its companion files HTML and JS) you will have to add the button image file to the same folder and upload all files in the folder to the LMS. The path to this button is a relative path.
Lilybiri

Similar Messages

  • Images for Spry Tabbed Widget  Buttons

    Hello,
    I would like my tab buttons to be images like the ones here: http://labs.wip3.adobe.com/technologies/spry/home.html
    It's the sample after this section:
    Spry 1.6.1—Ensuring Adobe AIR compatibiity
    Thanks,
    Troy

    I have created some nav button images with a gradient applied in Photoshop and saved them as GIFs. Am having a bit of a challenge applying them to my Spry menu tabs as Background Images. But there is no reason why this shouldn't work, isn't that correct? (All software CS4).
    I went out and bought a book offering CSS tips and tricks. Though the book isn't specific to Dreamweaver -- more of an HTML/CSS how-to-- it did offer a number of ways to apply images to nav bar, but all of them advised avoiding Javascript to accomplish this, which doesn't seem to be an option if I'm using Spry (which certainly seems to have its advantages, so I'd like to stick w/it if possible).
    Any advice, insight or directions to a tutorial would be much appreciated. I did find this: http://help.adobe.com/en_US/Dreamweaver/10.0_Using/WSc78c5058ca073340dcda9110b1f693f21-7b0 3a.html
    Will parse through it in the morning, but am not sure it's the right set of instructions. Thought I'd ask an expert before spending much time on it.
    Thank you,
    Paula

  • I am trying to include some widgets into my website through iweb.How to keep only the widget button on the homepage instead of the whole open widget?

    I found the HTML code for including the Facebook widget buttons on my webiste...now I also wanted to include some other widget so I looked at www.widgetbox.com....I can download the html code and once I put that on my webpage then I have the widget open. How can I only have the widget button instead? For example I wanted to have the weather widget, but only the button weather widget, as if it was on the iphone, so that user can click on it just if they want, but I couldn't manage to do it. Does anyone knows?

    Add an HTML snippet and put the code in it:
    Click to view full size
    OT

  • Button image issues

    Im having issues with button images in captivate 4, after designing buttons in photoshop then saving them as PNG's and putting them in the buttons folder. When i apply these buttons to a slide the button images are missing parts and look bad.. any suggestions?, please help.

    Hi there
    I believe Captivate uses the color value of the pixel in position 0, 0 to determine the transparent color for the button image. You need to ensure you are using a unique color for that location. What you posted seems to infer that you have a color being rendered as transparent and the color is used in other places in the image.
    Cheers... Rick
    Click here for Adobe Certified Captivate and RoboHelp HTML Training
    Click here for the SorcerStone Blog
    Click here for RoboHelp and Captivate eBooks

  • Shortening accordion widget buttons MUSE

    Hi guys
    I was wondering how to shorten the accordion widget buttons in muse. They seem unable to reduce below a certain width and I would like the left and right edges to be closer to my text/
    Any suggestion would be much appreciated.
    Cheers,
    - Coen

    Personally I would try the tabbed panel widget instead. Then you would have narrower links but they would be beside each other instead of on top of each other.
    Another option may be to go with no border and then add a similar graphic as i fill that is narrower and centered.

  • Button Images are not shown

    Dear All,
    In one of our test instance, some button images are not shown, whereas some are.
    They are shown as grey button.
    I searched metalink, according to them patch 1238573 should be installed, which is already installed.
    What could be the reason?
    Also, is there any way to find out which images are missing?
    Regards,
    Ashish Shah

    Hi
    I've seen this happen a few times. The solution is usually to synchronise something called 'the X-Server' with the middle tier. I'm afraid that the technology is over my head, but it does work!
    The X-Server controls how images are rendered in the e-Business Suite. Your DBA should know what this is and it's a simple matter of stopping and restrating the X-server.
    That should do the trick!
    Regards
    Tim

  • Bug or feature? Button images prefixed with /i/

    Dear all -
    Several people have noticed that button images get prefixed with /i/, so that if you use #IMAGE_PREFIX#image.gif then the source reads /i//i/image.gif (and of course the image isn't displayed). Admittedly I can't prove that right now because, oddly, IE refuses to show source at all and FF always shows the P101 source when I use #IMAGE_PREFIX#.
    We were hoping to use a substitution string for the path so that we can pick up a file from the filesystem, but all we get is /i/&MY_IMAGES.image.gif. The substitution string works fine in the templates and elsewhere.
    #WORKSPACE_IMAGES# still works.
    However, my question is: is this intended behaviour or a bug?
    Many thanks,
    John.

    Hi Carl -
    Button Image Attributes:
    Style = Image
    Image = <our substitution string>image.gif
    (well, that's what we'd like anyway - currently we have:
    Image = #WORKSPACE_IMAGES#image.gif)
    Many thanks.
    And, incidentally, many thanks for fixing that DHTML sublist bug in 2.2 - much appreciated.
    Regards,
    John.

  • Standard button image problem

    Hi,
    I've got a problem when I try to set Image to the button from standard components.. I can set it up, but than I didn't see the image in the browser.
    With the button from basic components there is everything working fine, unfortunately I need that component from standard.. any advice?
    thx.

    Hi,
    I've got a problem when I try to set Image to the button from standard
    components.. I can set it up, but than I didn't see the image in the browser.
    With the button from basic components there is everything working fine,
    unfortunately I need that component from standard.. any advice?
    thx.Standard button has problems with images due to a JSF issue. To work around the issue, remove leading / from the buttons image property and re-deploy. This should cause the standard button image to display correctly.
    Hope it helps,
    Lark

  • Button Image not display proper in production.

    Hi,
    I have issue regarding button image, in local jdev its works fine but when i deploy page to production button image is not shown properly. Its display like html button. can any body tell me the solution?
    Thanks

    Also go through
    Look and Feel for "Button"Thanks
    --Anil                                                                                                                                                                                                                       

  • Actions menu wheel image and Go button image

    Hello ,
    In APEX 4 Interactive Reports, the actions menu wheel image and the go button are coming as html buttons instead of the wheel image and go button image.
    Is there a way I can rever to the old wheel img and go button .
    Thanks,
    Dippy

    Within the IR, under Search Bar, you can set Actions Menu Image to '/i/ws/action_32x24.gif' - this is the green wheel but does not have little arrow. I will contact our image guru and see if the old one is sitting somewhere. As for 'Go', this does not support an image but you can change the word if you need to (using Search Button Label) and set a button template to match your application.
    -- Sharon

  • Can you change toolbar button images in SQL Server 2012?

    In SQL Server 2012 management studio I do not see an option to change the button image of the buttons on the toolbar.
    In previous versions of SQL, you could go to Tools --> Customize --> Rearrange Commands, select the toolbar, click on a command and then click "Modify Selection". One of the resulting choices was "Change Button Image". You could
    choose a different image for the toolbar button you selected. Another choice was "Edit Button Image" which allowed you to create a completely new image for your toolbar button.
    I do not see any way to do this in SQL Server 2012. Has this functionality been removed or am I just not finding it?
    Thanks,
    Alan

    Hi Alan,
    Based on your description, I make a test in SQL Server 2012, and I also find that there is no option to change button image or edit button image when customizing toolbar. It seems that the functionality has been changed from SQL Server 2012.
    Therefore, If you concern about this feature, I recommend you submit the requirement at
    https://connect.microsoft.com/SQLServer/ .  If the requirement mentioned by customers for many times, the product team may consider to add this feature. Your feedback is valuable for us to improve
    our products and increase the level of service provided.
    Thanks,
    Lydia Zhang

  • QIP-7100 vs QIP-6200 No widget button?

    Hi
    Does the older receiver have a widget button on the remote?
    What is the difference between the 2 models?  I know the 7100 is the newer version, but had heard bad things about it previously.
    I am returning 1 cblbox.  Which should I keep, which should I return?

    Hello,
    All our remote controls have a widgets button.  If you do not happen to have a newer model remote that clearly specifies the Widgets button then it will be the "A" button on the remote.  Ususally the "A" button is a small yellow triangle.  This also holds true fot the newer model remotes that have widget button, the "A" button will also bring up the widgets. I hopes that answers your question concerning the remote control. 
    Now as far as which model HD set top box is better, the 6200 or 7100. That decision can only be made by you.  We do not favor one over the other, but I will say that if anything were to ever happen in the future where your cable box needed to be replaced it will more then likely be replaced by a 7100. 
    I hope I was able to help you in your decision. Let us know if you need further assistance. ^LS
    Lori
    Verizon Telecom
    Fiber Solution Center
    Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan. Follow us on Twitter™!

  • Displaying Iconic Button images

    Hi,
    I have installed 9i Apps Server with Forms6i and have deployed an already existing application on it. The Iconic buttons are not displaying any images. Is there a patch that I need to install ? if yes, which one? Otherwise, whatelse needs to be done in order to deal with this problem ? Thanks for anyone's help in advance.

    I have all the gif in the directory and the physical directory's path is defined in Registry.dat file. Still no result and I cannot get the iconic button images. Appreciate your feedback but any other suggestions.

  • Toolbar button image

    <p>dear all,</p><p>can i change crystal report viewer toolbar image folder ? i knew that in .Net version component, there is a  CrystalReportViewer.ToolbarImagesFolderUrl Property, but i can&#39;t find nearest similar property like that in CrystalReportViewer class in jrc. </p><p>i need to change toolbar image since all of button images didn&#39;t display at all. maybe it can be solved when i create virtual directory &#39;/crystalreportviewers10/&#39; manually in my Tomcat and then create &#39;/images/toolbar/&#39; folder inside it, but what i exactly need is place all of toolbar button images in the same WAR file with my java app.</p><p>thx for any clue !!</p><p>- victor -  </p>

    <p>Does this help?</p><p> </p><p><a href="http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2014519">http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2014519</a></p><p> </p><p>Sincerely,</p><p>TUeda <br /></p>

  • No Add to My Widgets Button

    When I am in widget browser and go into a details page of any widget, I don't have the Add to My Widgets button.  So therefore I can't download any widgets to Dreamweaver.  Any solutions?
    This was copied from another forum question.

    Sorry I don't have a solution for you.  You may get better help on this from the Widget Browser Forum
    http://forums.adobe.com/community/labs/widgetbrowser
    If you're on a Mac, see this tech note on AIR installation issues:
    http://kb2.adobe.com/cps/902/cpsid_90205.html
    Good luck!
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/
    http://twitter.com/altweb

Maybe you are looking for