Widget Disappears when testing in version 3.04?
The widget pops up on the screen then it is gone. The app continues to run, but is not visible. Any help would be appreciated.
you have a stop() on frame 24 so it never gets to frame 34 where paragraph starts
Similar Messages
-
Embedded files 'disappear' when viewing signed version of a document
Hello,
We've just come across a weird issue when viewing signed documents containing embedded files in Adobe Reader. If we use the 'Click to view this version' link in the Signatures panel, the embedded files are not shown in the Attachments panel, even though they are covered by the signature.
I've uploaded a sample document that illustrates the issue to Google Drive, here is the link: https://drive.google.com/file/d/0B1wk9toh5e7AZVBIb2V6a2lDMWM/view?usp=sharing
Thanks,
Ken"View this version" comes with a disclaimer in the top bar that most functions are disabled in this view. If attachments are shown in the "Attachments" panel, then they can be opened
(otherwise what's the point to show them at all), and Acrobat uses a default app for this MIME type (i.e. Notepad for .txt files) to open it and has no control what the user could do there. User could definitely copy this file to a different location and this is akin to copying some of he PDF's content which is a prohibited operation in this view.
You can treat the disclaimer in the top bar as the Adobe official statement along with my read on what it means with respect to annotations.
IMO to "View this version" for the last signature when there are no changes after the file was signed is meaningless because both versions are identical. It is only when some changes were made after a signature that you may want/need to view the signed version. -
Layer disappears when testing SWF
Hi,
I'm using Adobe Flash CS5, ActionScript 3.0. I've created a simple file with a few animations. When I press enter, the movie animates perfectly on the stage. But when I press Ctrl+Enter to view it in test mode (and when I export to SWF), one of the five layers just doesn't appear. It's as if I never created the layer! What could be causing this issue?
.FLA file: http://www.benjaminyobp.com/a/m4s_splash_2.fla
.SWF file: http://www.benjaminyobp.com/a/m4s_splash_2.swf
Thanks in advance for any help!
Benjaminyou have a stop() on frame 24 so it never gets to frame 34 where paragraph starts
-
Static NAT entry disappears when using NVI on Cisco 1921 (Multiple versions)
We have a Cisco 1921 as an IPSec tunnel endpoint where we assign static NAT entries. It is a static one-to-one NAT putting each remote endpoint as a local /24 subnet. We are using NVI and we see some of these static entries disappear when packets are unable to reach the destination.
The production router is running 15.0(1r)M16 but we were able to reproduce this same behavior on 15.4(1)T2.
To reproduce, we add the static NVI entry:
ip nat source static X.X.X.X 172.30.250.11
And things look good for a bit:
ROUTER# sh ip nat nvi trans | i 172.30.250.11
gre 172.30.250.11:0 X.X.X>X:0 Y.Y.Y.Y:0 Y.Y.Y.Y:0
--- 172.30.250.11 138.54.32.9 --- ---
tcp Y.Y.Y.Y:60360 Z.Z.Z.Z:60360 172.30.250.11:22 X.X.X.X:22
There is a known issue with GRE traffic being dropped at this particular endpoint, so after generating GRE traffic, the entry completely disappears:
ROUTER# sh run | i 172.30.250.11
ROUTER#
ROUTER# sh ip nat nvi trans | i 172.30.250.11
gre 172.30.250.11:0 X.X.X>X:0 Y.Y.Y.Y:0 Y.Y.Y.Y:0
icmp Y.Y.Y.Y:59916 Z.Z.Z.Z:59916 172.30.250.11:59916 172.30.250.11:59916
tcp Y.Y.Y.Y:60360 Z.Z.Z.Z:60360 172.30.250.11:22 X.X.X.X:22
I can reproduce this by severing the tunnel to any other remote site, and after generating GRE traffic to the downed endpoint, the corresponding static NAT entry will disappear.
Debugging has not shown anything, and I have found some mentions of similar behavior on older versions. Has anyone seen this? We don't have support access to test all versions, so if it is known to be resolved in a particular one, we would love to know to work towards loading that version.
ThanksHi Ryan,
Asa cannot ahve 2 default routes, it can only have one. ASA also doesnt support PBR, so the setup that you are trying to configure would not work on the ASA. Router is the correct option for it.
Hope that helps.
Thanks,
Varun Rao
Security Team,
Cisco TAC -
I created a book in iBooks Author using the Photo Book template. When I rotate to portrait orientation, the photo or widget disappears and a table of contents appears with only the interactive media showing.
Thanx for the prompt response, KT. I have indeed seen that thread, only just after I posted the question.
I have spent hours on the phone with what I now know is a call center in Texas on this question.
I think Apple could be a little more "hands on" with iBooks Author users, and it should also be pointed out that landscape photos will not display in portrait mode.
In my case, I used gallery widgets to display vertical photos, since they look better in portrait mode.
But instead of simply rotating, the page disappears and a TOC of interactive media appears. The gallery behaves as expected when tapped. This is not what I expected, but since the gallery works, I can live with it.
Right now I have "tickets" telling me to "fix" this "problem or to disable portrait mode.
I don't want to disable portrait mode.
Will Apple accept the books if I tell them this is not an "error?" -
all navigational subheadings near top of screen in previous version of ff disappeared when installed ff4. they included wikipedia, news(with sub-options LA times, NY times, BBC etc),YouTube, mail & others. how do i recover previous version?
You are welcome. I'm glad you got it back up.
(1) You say you did the symbolic link. I will assume this is set correctly; it's very important that it is.
(2) I don't know what you mean by "Been feeding the [email protected] for several weeks now, 700 emails each day at least." After the initial training period, SpamAssassin doesn't learn from mail it has already processed correctly. At this point, you only need to teach SpamAssassin when it is wrong. [email protected] should only be getting spam that is being passed as clean. Likewise, [email protected] should only be getting legitimate mail that is being flagged as junk. You are redirecting mail to both [email protected] and [email protected] ... right? SpamAssassin needs both.
(3) Next, as I said before, you need to implement those "Frontline spam defense for Mac OS X Server." Once you have that done and issue "postfix reload" you can look at your SMTP log in Server Admin and watch as Postfix blocks one piece of junk mail after another. It's kind of cool.
(4) Add some SARE rules:
Visit http://www.rulesemporium.com/rules.htm and download the following rules:
70sareadult.cf
70saregenlsubj0.cf
70sareheader0.cf
70sarehtml0.cf
70sareobfu0.cf
70sareoem.cf
70sarespoof.cf
70sarestocks.cf
70sareunsub.cf
72sare_redirectpost
Visit http://www.rulesemporium.com/other-rules.htm and download the following rules:
backhair.cf
bogus-virus-warnings.cf
chickenpox.cf
weeds.cf
Copy these rules to /etc/mail/spamassassin/
Then stop and restart mail services.
There are other things you can do, and you'll find differing opinions about such things. In general, I think implementing the "Frontline spam defense for Mac OS X Server" and adding the SARE rules will help a lot. Good luck! -
ActiveX controls disappear when VI is loaded in a Sub-Panel with Start Modal Dialog usage
Hi,
I have a subpanel in a VI (VI1) in which another VI (VI2) is loaded. VI1 is used as a module for an Action step in TestStand. VI2 has ActiveX controls like ExpressionEdit and Adobe PDF reader etc. VI1 loads VI2 in a sub-panel and calls Start Modal Dialog.vi. I have set 'Show front panel when called' to true for VI1 so that the VI pops up when the sequence is run. When the sequence runs and when the Start Modal Dialog VI is called from VI1, all ActiveX controls in VI2 (loaded in the sub-panel) disappears. Here is the screenshot of the frontpanel of VI1 when the sequence is run:
This problem occurs in TestStand 4.2.1, TestStand 2010 and TestStand 2010 SP1 (as far as I have tested. May occur in older versions too). In the attached file, VI1 is 'ExprEdit Test.vi' and VI2 is 'SubpanelLoad.vi'. The attached sequence is developed in TestStand 2010 SP1.
How can this issue be solved?
Thank you,
Ganesh Kumar
Solved!
Go to Solution.
Attachments:
Subpanel Load ExpressionEdit problem.zip 23 KBHi,
An update on this issue: I tried changing the order of loading the VI in the SubPanel and the start modal dialog. I called start modal dialog and then loaded the VI (VI2) in the SubPanel. When I ran the sequence, the activeX controls did not disappear (I was pretty sure that the ActiveX controls in VI2 would not disappear since I am calling Start Modal Dialog before loading the VI in the Subpanel). Then I just changed the sequence of operations back to the previous order (loading the Subpanel with the VI and then calling the Start Modal Dialog). When I ran the sequence, the activeX controls where still displayed. But when I ran the sequence with the VI1 backup (that I had taken before making all these modifications) the activeX controls were not displayed. I a nutshell, I now have 2 versions whose codes are the same. But when I run the sequence with action steps for these VIs, the activeX controls disappear when the unmodified backup VI runs and does not disappear when the modified VI is run. I have attached the files that I used along with the sequence file. The details are as follows:
ExprEdit Test (Not Working).vi - The unmodified backup VI for which the ActiveX controls disappear.
ExprEdit Test (Working).vi - The modified VIs in which the ActiveX Controls do not disappear (But same code as ExprEdit Test (Not Working).vi).
ExpreEdit Test.seq - The sequence file containing 2 action steps one each for theabove mentioned VIs.
SubpanelLoad.vi - The VI that contains activeX controls and is loaded in the SubPanel.
Note that the sequence is created in TestStand 4.2.1.
Thank you,
Ganesh Kumar
Attachments:
Subpanel Load ExpressionEdit problem.zip 36 KB -
Table number xrefs disappear when roundtripping the XML doc back to FM
I'm using FM 7.2p158 running on Windows XP on a Dell Optiplex GX520 with 1GB RAM. I've converted my legacy FM docs to structured FM, but my (CALS-formatted) table number xrefs disappear when I roundtrip the XML docs back to FM. How can I remedy this?
Initially, I used my own conventions to name the table part elements as I have about 10-15 specific table types and I used those Table Tag names as table elements names (Invisible2, Invisible4, StepTable, ...), so I had 10-15 elements that were true "is fm table element" types in the EDD, DTD, and R/W rules. The table number xrefs worked as they should after roundtripping FM-XML-FM and the tables' shading, ruling, and Table Tags were correct.
I consulted our XSLT developer for proper browser display of the XML files, and he suggested that I should use the CALS table model. I studied the Struct Dev Gd, then I searched this forum for postings on CALS tables and related topics and used suggestions offered by many of you good folks to create an EDD, DTD, and R/W rules to that end.
I've run some tests using many iterations of my files (both CALS and non-CALS types) to roundtrip the FM files, but I cannot get the xrefs of the table number from the CALS-version table title element to display when I roundtrip the XML doc and open it in FM. I get this:
-- In the XML doc text opened in FM, instead of "Table 1-1" for the xref, it leaves a blank space (although the source numbered table title is there).
-- In the Structure View of the same XML doc, I see the following:
- The CROSSREF element text says WHITESPACE.
- Both the CROSSREF element and its source element continue to have the (matching) "Idref" and "Id" number displayed in this view.
- The Idref attribute is disconnected from the CROSSREF element.
- The "table" element is disconnected from its container element (TableAnchor).
Once I apply the File/Import/Element Definitions command in the XML doc in FM, the XML becomes valid and both the CROSSREF Idref attribute and the table element are reconnected, but my xref of the table number is still WHITESPACE.
The XML-converted doc source text reads:
If you're using WebDrive, you will want to use the options shown
in [CROSSREF Idref = "BEHJCAJB" format = "Table Number"/] on the [IndexEntry
type = "Index" text = "WebDrive options"/]WebDrive control panel.[/Para]
[TableAnchor]
[table tabstyle = "Expressroom2" cols = "2"
colwidths = "2.198in 3.500in" colsep = "1" rowsep = "1"
frame = "all"]
[title Id = "BEHJCAJB"][?FM MARKER [Cross-Ref] 86302: TableTitle: Table 1-1
WebDrive control panel options?]WebDrive login values[/title]
[tgroup cols = "2" colsep = "1" rowsep = "1"]
[colspec colnum = "1" colname = "1" colwidth = "2.198in"]
[/colspec][colspec colnum = "2" colname = "2" colwidth = "3.500in"]
[/colspec][thead]
[row rowsep = "1"]
[entry colname = "1"][CellHeading]Field[/CellHeading][/entry]
[entry colname = "2"][CellHeading]Value[/CellHeading][/entry]
[/row]
[/thead]
But when I open the same XML-converted doc back in FM, I get the following:
"If you're using WebDrive, you will want to use the options shown in on the WebDrive control panel."
The CROSSREF Idref "BEHJCAJB" is [WHITESPACE] in the Structure View, so it's a blank space within the actual text in FM.
I have excerpts from my EDD, DTD, and R/W rules that I can post, but would make this even more lengthy. (Sorry about the current length.) What do I need to change to make the xrefs work when I roundtrip the files?
[I don't know whether it makes any difference or not, but I have changed the element names since I originally used a conversion table (to structure my legacy FM files); however, I persisted those element name changes throughout the EDD, DTD, and R/W rules files.]I'm using FM 7.2p158 running on Windows XP on a Dell Optiplex GX520 with 1GB RAM. I've converted my legacy FM docs to structured FM, but my (CALS-formatted) table number xrefs disappear when I roundtrip the XML docs back to FM. How can I remedy this?
Initially, I used my own conventions to name the table part elements as I have about 10-15 specific table types and I used those Table Tag names as table elements names (Invisible2, Invisible4, StepTable, ...), so I had 10-15 elements that were true "is fm table element" types in the EDD, DTD, and R/W rules. The table number xrefs worked as they should after roundtripping FM-XML-FM and the tables' shading, ruling, and Table Tags were correct.
I consulted our XSLT developer for proper browser display of the XML files, and he suggested that I should use the CALS table model. I studied the Struct Dev Gd, then I searched this forum for postings on CALS tables and related topics and used suggestions offered by many of you good folks to create an EDD, DTD, and R/W rules to that end.
I've run some tests using many iterations of my files (both CALS and non-CALS types) to roundtrip the FM files, but I cannot get the xrefs of the table number from the CALS-version table title element to display when I roundtrip the XML doc and open it in FM. I get this:
-- In the XML doc text opened in FM, instead of "Table 1-1" for the xref, it leaves a blank space (although the source numbered table title is there).
-- In the Structure View of the same XML doc, I see the following:
- The CROSSREF element text says WHITESPACE.
- Both the CROSSREF element and its source element continue to have the (matching) "Idref" and "Id" number displayed in this view.
- The Idref attribute is disconnected from the CROSSREF element.
- The "table" element is disconnected from its container element (TableAnchor).
Once I apply the File/Import/Element Definitions command in the XML doc in FM, the XML becomes valid and both the CROSSREF Idref attribute and the table element are reconnected, but my xref of the table number is still WHITESPACE.
The XML-converted doc source text reads:
If you're using WebDrive, you will want to use the options shown
in [CROSSREF Idref = "BEHJCAJB" format = "Table Number"/] on the [IndexEntry
type = "Index" text = "WebDrive options"/]WebDrive control panel.[/Para]
[TableAnchor]
[table tabstyle = "Expressroom2" cols = "2"
colwidths = "2.198in 3.500in" colsep = "1" rowsep = "1"
frame = "all"]
[title Id = "BEHJCAJB"][?FM MARKER [Cross-Ref] 86302: TableTitle: Table 1-1
WebDrive control panel options?]WebDrive login values[/title]
[tgroup cols = "2" colsep = "1" rowsep = "1"]
[colspec colnum = "1" colname = "1" colwidth = "2.198in"]
[/colspec][colspec colnum = "2" colname = "2" colwidth = "3.500in"]
[/colspec][thead]
[row rowsep = "1"]
[entry colname = "1"][CellHeading]Field[/CellHeading][/entry]
[entry colname = "2"][CellHeading]Value[/CellHeading][/entry]
[/row]
[/thead]
But when I open the same XML-converted doc back in FM, I get the following:
"If you're using WebDrive, you will want to use the options shown in on the WebDrive control panel."
The CROSSREF Idref "BEHJCAJB" is [WHITESPACE] in the Structure View, so it's a blank space within the actual text in FM.
I have excerpts from my EDD, DTD, and R/W rules that I can post, but would make this even more lengthy. (Sorry about the current length.) What do I need to change to make the xrefs work when I roundtrip the files?
[I don't know whether it makes any difference or not, but I have changed the element names since I originally used a conversion table (to structure my legacy FM files); however, I persisted those element name changes throughout the EDD, DTD, and R/W rules files.] -
CS4 + CS5 Brush CURSOR outline disappear when increase the brush size
Hi
In Photoshop CS4 and CS5, the outline of the brush cursor starts to disappear when you increase the brush size.
It's OK under 65px in diameter and it's start to disappear over 66px. In 438px the outline is a single dot and over 439px the cursor outline is completely gone!
I read that it's caused by the old drivers for the video card. I'm using GeForce 8800GT and I updated the driver with the latest version form the nVidia web site. The problem is still here!
HELP?I'm seeing a bit of a pattern of multiple people reporting problems with nVidia 8800 cards. I'm thinking nVidia isn't testing new drivers against this particular model very intensively. See my comments on video cards and drivers in this thread:
http://forums.adobe.com/thread/682582
-Noel -
Background audio disappears when an interaction slide appears
I have a (Captivate 6 produced) project which includes approx 40 slides and it looks to be running smoothly when published.
However, I have imported a background music audio track which I want to play (and then loop) during the course of the whole course - however, whenever it reaches a slide which has an interaction on it, the music disappears and then returns when a non-interaction-based slide is reached. Disappears again when the next slide is reached that contains an interaction, etc.
I am unable to test in earlier versions of Captivate and so I am wondering whether this is an issue with this version of the program i.e. background audio disappears when an interaction slide is shown?We don't have the 6.1 update yet, but I did find a workaround for this (although it's not perfect). With Captivate 6 there is now a "Play Audio" action that you can assign to the Slide Properties "On Enter" action. When I did this, the narration continues to play even after the Flash interaction appears in the timeline. So for any narrated slides that have Flash interactions, you need to:
1) remove the Audio narration that is imported to the Slide (Audio > Remove > Slide from the menu bar)
2) On the Slide Properties - On Enter action, select Play Audio, then select the appropriate narration file for that slide.
This seemed to work -- the only problem is that if you use the "Play/Pause" button in the Adobe playback navigation bar, the button seems to get confused and changes to the Play state while the audio is still playing (instead of staying in the Pause state until the audio finishes as it does when the audio is imported to the Slide itself as narration). Not sure how to fix that issue except to remove the Pause/Play button from the playbar and just use the Next/Back buttons. And if you use navigation buttons instead of the Adobe playbar, you don't need to worry about this.
Hope this helps! -
Spry drop down menu not working when tested in ie7, does in FF and safari on mac
Please help! I have a spry dropdown menu on a page, when tested in FF and Safari it works fine, but when tested in IE the menus don't drop down and the styling to the over state seems to be being ignored. I have attached the code and css below.
As I am just on the build stage it is in a template, I have not made any editable regions on the template as yet, this should not matter should it? As is probably obvious already I am quite new to this! Please help!
CODE
<ul id="MenuBar1" class="MenuBarHorizontal">
<li><a href="../about us/index.html" target="_self" class="MenuBarItemSubmenu"><p></p>about us</a>
<ul>
<li><a href="../calander/index.html" target="_self"><p></p>calendar</a></li>
<li><a href="../oompah page/index.html" target="_self">oompah brass</a></li>
<li><a href="../merchandise/index.html" target="_self"><p></p>merchandise</a></li>
</ul>
</li>
<li><a href="../beer/index.html" target="_self" class="MenuBarItemSubmenu"><p></p>beers</a>
<ul>
<li><a href="../beer/book a keg/index.html" target="_self"><p></p>book a keg</a></li>
</ul>
</li>
<li><a href="../events/index.html" target="_self" class="MenuBarItemSubmenu"><p></p>events</a>
<ul>
<li><a href="../events/oktoberfest events/index.html" target="_self"><p></p>oktoberfest events</a></li>
<li><a href="../events/corporate/index.html" target="_self"><p></p>corporate</a></li>
<li><a href="../events/stag hen/index.html" target="_self"><p></p>stag/ hen</a></li>
<li><a href="../events/birthday group/index.html" target="_self">birthday/ group</a></li>
</ul>
</li>
<li><a href="../sports/index.html" target="_self" class="MenuBarItemSubmenu"><p></p>sports</a>
<ul>
<li><a href="../bayern supporters club/index.html" target="_self"><p></p>Bayern Munich uk</a> </li>
</ul>
</li>
<li><a href="../menu/index.html" target="_self" class="MenuBarItemSubmenu"><p></p>food</a>
<ul>
<li><a href="../menu/everyday menu/index.html" target="_self"><p></p>everyday menu</a></li>
<li><a href="../menu/special menu/index.html" target="_self">special menu</a></li>
</ul>
</li>
<li><a href="../package and tickets/index.html" target="_self" class="MenuBarItemSubmenu">packages and tickets</a>
<ul>
<li><a href="../terms and conditions/index.html" target="_self">terms and conditions</a></li>
</ul>
</li>
<li><a href="../double knuckle challenge/index.html" target="_self">double knuckle challenge</a></li>
<li><a href="../gallery/index.html" target="_self"><p></p>gallery</a></li>
<li><a href="../contact/index.html" target="_self"><p></p>contact us</a></li>
</ul>
CSS
@charset "UTF-8";
/* SpryMenuBarHorizontal.css - version 0.6 - Spry Pre-Release 1.6.1 */
/* Copyright (c) 2006. Adobe Systems Incorporated. All rights reserved. */
LAYOUT INFORMATION: describes box model, positioning, z-order
/* The outermost container of the Menu Bar, an auto width box with no margin or padding */
ul.MenuBarHorizontal
margin: 0;
padding: 0;
list-style-type: none;
font-size: 100%;
cursor: default;
width: 900px;
text-align: center;
vertical-align: middle;
/* Set the active Menu Bar with this class, currently setting z-index to accomodate IE rendering bug: http://therealcrisp.xs4all.nl/meuk/IE-zindexbug.html */
ul.MenuBarActive
z-index: 1000;
/* Menu item containers, position children relative to this container and are a fixed width */
ul.MenuBarHorizontal li
margin: 0;
padding: 0;
list-style-type: none;
font-size: 100%;
position: relative;
text-align: center;
cursor: pointer;
width: 100px;
float: left;
height: 50px;
/* Submenus should appear below their parent (top: 0) with a higher z-index, but they are initially off the left side of the screen (-1000em) */
ul.MenuBarHorizontal ul
margin: 0;
padding: 0;
list-style-type: none;
font-size: 100%;
z-index: 1020;
cursor: default;
width: 100px;
position: absolute;
left: -1000em;
background-color: #f8ba16;
color: #000099;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to auto so it comes onto the screen below its parent menu item */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible
left: auto;
/* Menu item containers are same fixed width as parent */
ul.MenuBarHorizontal ul li
width: 100px;
color: #300;
background-color: #f8ba16;
/* Submenus should appear slightly overlapping to the right (95%) and up (-5%) */
ul.MenuBarHorizontal ul ul
position: absolute;
margin: -5% 0 0 95%;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to 0 so it comes onto the screen */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible ul.MenuBarSubmenuVisible
left: auto;
top: 0;
DESIGN INFORMATION: describes color scheme, borders, fonts
/* Submenu containers have borders on all sides */
ul.MenuBarHorizontal ul
border-bottom-width: 4px;
border-bottom-style: solid;
border-bottom-color: #000099;
/* Menu items are a light gray block with padding and no text decoration */
ul.MenuBarHorizontal a
display: block;
cursor: pointer;
padding: 0.5em 0.75em;
color: #000099;
text-decoration: none;
/* Menu items that have mouse over or focus have a blue background and white text */
ul.MenuBarHorizontal a:hover, ul.MenuBarHorizontal a:focus
background-color: #33C;
color: #FFF;
/* Menu items that are open with submenus are set to MenuBarItemHover with a blue background and white text */
ul.MenuBarHorizontal a.MenuBarItemHover, ul.MenuBarHorizontal a.MenuBarItemSubmenuHover, ul.MenuBarHorizontal a.MenuBarSubmenuVisible
background-color: #f8ba16;
color: #300;
SUBMENU INDICATION: styles if there is a submenu under a given menu item
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenu
background-repeat: no-repeat;
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenu
background-repeat: no-repeat;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenuHover
background-repeat: no-repeat;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenuHover
background-repeat: no-repeat;
BROWSER HACKS: the hacks below should not be changed unless you are an expert
/* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
ul.MenuBarHorizontal iframe
position: absolute;
z-index: 1010;
filter:alpha(opacity:0.1);
/* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
@media screen, projection
ul.MenuBarHorizontal li.MenuBarItemIE
display: inline;
f\loat: left;
background: #FFF;
Many thanks in advance.Please help! I have a spry dropdown menu on a page, when tested in FF and Safari it works fine, but when tested in IE the menus don't drop down and the styling to the over state seems to be being ignored. I have attached the code and css below.
As I am just on the build stage it is in a template, I have not made any editable regions on the template as yet, this should not matter should it? As is probably obvious already I am quite new to this! Please help!
CODE
<ul id="MenuBar1" class="MenuBarHorizontal">
<li><a href="../about us/index.html" target="_self" class="MenuBarItemSubmenu"><p></p>about us</a>
<ul>
<li><a href="../calander/index.html" target="_self"><p></p>calendar</a></li>
<li><a href="../oompah page/index.html" target="_self">oompah brass</a></li>
<li><a href="../merchandise/index.html" target="_self"><p></p>merchandise</a></li>
</ul>
</li>
<li><a href="../beer/index.html" target="_self" class="MenuBarItemSubmenu"><p></p>beers</a>
<ul>
<li><a href="../beer/book a keg/index.html" target="_self"><p></p>book a keg</a></li>
</ul>
</li>
<li><a href="../events/index.html" target="_self" class="MenuBarItemSubmenu"><p></p>events</a>
<ul>
<li><a href="../events/oktoberfest events/index.html" target="_self"><p></p>oktoberfest events</a></li>
<li><a href="../events/corporate/index.html" target="_self"><p></p>corporate</a></li>
<li><a href="../events/stag hen/index.html" target="_self"><p></p>stag/ hen</a></li>
<li><a href="../events/birthday group/index.html" target="_self">birthday/ group</a></li>
</ul>
</li>
<li><a href="../sports/index.html" target="_self" class="MenuBarItemSubmenu"><p></p>sports</a>
<ul>
<li><a href="../bayern supporters club/index.html" target="_self"><p></p>Bayern Munich uk</a> </li>
</ul>
</li>
<li><a href="../menu/index.html" target="_self" class="MenuBarItemSubmenu"><p></p>food</a>
<ul>
<li><a href="../menu/everyday menu/index.html" target="_self"><p></p>everyday menu</a></li>
<li><a href="../menu/special menu/index.html" target="_self">special menu</a></li>
</ul>
</li>
<li><a href="../package and tickets/index.html" target="_self" class="MenuBarItemSubmenu">packages and tickets</a>
<ul>
<li><a href="../terms and conditions/index.html" target="_self">terms and conditions</a></li>
</ul>
</li>
<li><a href="../double knuckle challenge/index.html" target="_self">double knuckle challenge</a></li>
<li><a href="../gallery/index.html" target="_self"><p></p>gallery</a></li>
<li><a href="../contact/index.html" target="_self"><p></p>contact us</a></li>
</ul>
CSS
@charset "UTF-8";
/* SpryMenuBarHorizontal.css - version 0.6 - Spry Pre-Release 1.6.1 */
/* Copyright (c) 2006. Adobe Systems Incorporated. All rights reserved. */
LAYOUT INFORMATION: describes box model, positioning, z-order
/* The outermost container of the Menu Bar, an auto width box with no margin or padding */
ul.MenuBarHorizontal
margin: 0;
padding: 0;
list-style-type: none;
font-size: 100%;
cursor: default;
width: 900px;
text-align: center;
vertical-align: middle;
/* Set the active Menu Bar with this class, currently setting z-index to accomodate IE rendering bug: http://therealcrisp.xs4all.nl/meuk/IE-zindexbug.html */
ul.MenuBarActive
z-index: 1000;
/* Menu item containers, position children relative to this container and are a fixed width */
ul.MenuBarHorizontal li
margin: 0;
padding: 0;
list-style-type: none;
font-size: 100%;
position: relative;
text-align: center;
cursor: pointer;
width: 100px;
float: left;
height: 50px;
/* Submenus should appear below their parent (top: 0) with a higher z-index, but they are initially off the left side of the screen (-1000em) */
ul.MenuBarHorizontal ul
margin: 0;
padding: 0;
list-style-type: none;
font-size: 100%;
z-index: 1020;
cursor: default;
width: 100px;
position: absolute;
left: -1000em;
background-color: #f8ba16;
color: #000099;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to auto so it comes onto the screen below its parent menu item */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible
left: auto;
/* Menu item containers are same fixed width as parent */
ul.MenuBarHorizontal ul li
width: 100px;
color: #300;
background-color: #f8ba16;
/* Submenus should appear slightly overlapping to the right (95%) and up (-5%) */
ul.MenuBarHorizontal ul ul
position: absolute;
margin: -5% 0 0 95%;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to 0 so it comes onto the screen */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible ul.MenuBarSubmenuVisible
left: auto;
top: 0;
DESIGN INFORMATION: describes color scheme, borders, fonts
/* Submenu containers have borders on all sides */
ul.MenuBarHorizontal ul
border-bottom-width: 4px;
border-bottom-style: solid;
border-bottom-color: #000099;
/* Menu items are a light gray block with padding and no text decoration */
ul.MenuBarHorizontal a
display: block;
cursor: pointer;
padding: 0.5em 0.75em;
color: #000099;
text-decoration: none;
/* Menu items that have mouse over or focus have a blue background and white text */
ul.MenuBarHorizontal a:hover, ul.MenuBarHorizontal a:focus
background-color: #33C;
color: #FFF;
/* Menu items that are open with submenus are set to MenuBarItemHover with a blue background and white text */
ul.MenuBarHorizontal a.MenuBarItemHover, ul.MenuBarHorizontal a.MenuBarItemSubmenuHover, ul.MenuBarHorizontal a.MenuBarSubmenuVisible
background-color: #f8ba16;
color: #300;
SUBMENU INDICATION: styles if there is a submenu under a given menu item
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenu
background-repeat: no-repeat;
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenu
background-repeat: no-repeat;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenuHover
background-repeat: no-repeat;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenuHover
background-repeat: no-repeat;
BROWSER HACKS: the hacks below should not be changed unless you are an expert
/* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
ul.MenuBarHorizontal iframe
position: absolute;
z-index: 1010;
filter:alpha(opacity:0.1);
/* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
@media screen, projection
ul.MenuBarHorizontal li.MenuBarItemIE
display: inline;
f\loat: left;
background: #FFF;
Many thanks in advance. -
Widget disappears from section page in portrait mode.
Thank you for your help.
I have a section page (iii) at the begginning of a book with a gallery of 12 photos. I have titled it and written a caption for each photo. Yet, when I switch to portrait mode the widget disappears. There is no image on the side. I have a title on the page in a text field, but I have no text in the main body text field (I'm using the the "Foreward" section template).
What's happening? I've downloaded two books about iBooks Author today but have yet to find a clue as to what I am doing wrong.
Thanks again.
Scott
iBooks Author 1.1
OS 10.7.4Just an extra tip: Make sure when you insert a widget in LANDSCAPE mode that you find the little Blue Bullseye circle and place it's cursor where you want to anchor it in the text, that way, it will be in the correct place when you go to PORTRAIT.
-
Why the window setting the printing disappeared when I try to select the page number of pdf file
When I send the pdf file to the printer and try to select the page number to be printed by entering (e.g., 4-10), the page for setting up printing work suddenly disappeared. As a result, I could only print pdf files from page 1 to the end, if I want to print any document. I have no problem with printing word documents. Thus, it should not be problems related to printer, right ?
Your help is highly appreciated !What is your operating system? Reader version?
You mean the Print panel completely disappears when you enter some page numbers? -
SPROXY: XSLT Type Error when testing
We are using SAP PI 7.1 to consume ABAP Proxies. We have performed all the necessary configurations and are able to see the ESR from within SAP R/3. When testing an ABAP Proxy via SPROXYI receive the error shown below. In fact I receive this error for all proxies that I try to test, including standard SAP functions. I am assuming this is a configuration issue rather than a specific issue with a proxy. I have checked SDN and SAP Service and I can't find any mention of this specific error. Is there anyone out there who can help?
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Inbound Proxy
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">PARSE_APPLICATION_DATA</SAP:Code>
<SAP:P1>Request Message</SAP:P1>
<SAP:P2>CX_CALL_ST_ERROR</SAP:P2>
<SAP:P3 />
<SAP:P4>Error Text: A type conflict occurred during the parameter transfer to the root INPUT of /1SAI/TXS1EF71A636AE519CFE80A Kernel ErrorId: UNCAUGHT_EXCEPTION</SAP:P4>
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error during XML => ABAP conversion (Request Message; error ID: CX_CALL_ST_ERROR; ( Error Text: A type conflict occurred during the parameter transfer to the root INPUT of /1SAI/TXS1EF71A636AE519CFE80A Kernel ErrorId: UNCAUGHT_EXCEPTION)) A type conflict occurred during the parameter transfer to the root INPUT of /1SAI/TXS1EF71A636AE519CFE80A</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>Hi Robert,
i know that this is quite late. The problem is with the XSLT which gets generated when you generate PROXY. And some times the kernel doesn't doesn't set the conversion of XSLT correctly. you can check the syntax of the XSLT /1SAI/TXS1EF71A636AE519CFE80A in the transaction STRANS.
There should be some basis notes from the component BC-DWB-PRX to solve the problem. -
I was pestered to death by Firefox to upgrade to 12.0. I am really sorry I did. I lost all my Security Exceptions. Tools > Options > Security > Exceptions All of my previous security exceptions disappeared when I upgraded Firefox. They are gone and I have NO list of what they were. Is there ant way to bring them back?
The security exceptions that allow other sites to install software?
Which version did you have before -- 3.6.x or Firefox 11?
I don't know whether you regularly back up your computer, but if you have a backup of your Firefox profile folder, then that data should be in there. If you can locate a backup copy of permissions.sqlite, you could use a utility to extract the list. (Or find a volunteer here to assist you with that.)
By the way, did your pop-up exceptions and image exceptions carry over? You can check those under Tools > Options > Content.
Maybe you are looking for
-
Hi Gurus, While creating a shopping cart by selecting the account assignment as taxable asset then in the account assignment screen we can see a Create Asset Master button when we click this, an asset will be created in the R/3. Please help me how th
-
I wrote two mobile pages with dreamweaver cs5.5 and jquery. Both do online calculations. Both appear and accept input. One page using jquery datepicker does not calculate. Solely in Firefox. IE9, Safari, Chrome display correct results. Debuggers show
-
Diffs between Win 3.11 & NT 4.0
Greetings, I have recently come across an issue that I am not sure how to go about solving...: We have a Forté application whose windows were developed/painted on Windows 3.11. Our client is now switching to NT 4.0, and suddenly our windows look bigg
-
Premier crashes once video is imported.
I import .mp4 or .mov files and it crashes. This is Adobe Premier Pro CC. I have Win 7 SP1 X64 16 RG ram, 350 GB free HD space, intel core i7 Example of some events ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Faulting application name: Adobe Premiere Pro.exe,
-
How do i get all the songs from 1 album to appear as 1 album instead of 3 albums because 2 of the songs feature guest artists in my itunes library?