Widget Icon missing fro Dock after upgrade to 10.6

After upgrading to Snow Leopard, I noticed my Widget icon went missing from the dock.
I have also noticed that I cannot put additional application icons in the dock. They will stay there for a few seconds and then disappear. Anybody have any suggestions on what to do ??

This happened to me as well ... eventually. It was working for some time then poof! No matter how many re-installs from different download locations the dock still won't show up. The interesting thing is that after locating where the widgets itself were they would run after all ... just that the dock which I am so used to isn't there anymore. Perhaps thats a good thing and does make the desktop feel like Vista/Windows7 but I would rather have the option to turn the dock on/off at my convenience and keep everything in line.

Similar Messages

The Facebook video chat icon is not appear after upgrading to mavericks X

The Facebook video chat icon is not appear after upgrading to mavericks X. Please help.

http://support.apple.com/kb/ht5404
Scroll down to the bottom, read and then perform the troubleshooting steps provided.

InfoObject is missing in report after upgrade

Hi,
My InfoObject Statistical ID is missing in Report after Upgrading from 3.5 to 7.0.
I did comparison of report before and after upgrade and found this issue.
the data content is the same but only this infoObject cannot be seen in the report
how do I correct this issue.
thanks
Edited by: Bhat Vaidya on Aug 6, 2008 12:24 PM

This not fixed. SAP couldn't explain why

HT203167 I am missing my audiobooks after upgrading ipod to new os

I am missing my audiobooks after upgrading ipod to new os.

Even though Apple iTunes has reached agreements with the Music and Film industries, they cannot offer Audiobooks over the Cloud.
So, when you buy an Audiobook, you must download it to your main machine and hold it there. If you upgrade your hardware (iPod, iPhone, or iPad) or IOS software, the audiobook on that device disappears and you will have to download it again from your main machine. This means wiring it up "old school" and not wifi.
As a consequence, it is advisable never to buy an audiobook from a portable device as it will not sync and will not be available for download elsewhere. I did this and I had to ask Apple to "push" a new file so that I could download it on my main machine.
Hope this helps.

Getting rid of ? from the dock after upgrading to ML

After upgrading to Mountain Lion the old ichat, ical and address book icons are now "?" and I can't get them off the dock. Dragging them off doesn't work, dragging to the trash doesn't work, and right clicking on it doesn't work. Any ideas?

You can set the dock back to factory defaults.
Start Finder, in the menubar Finder > Go > hold the option key down > select Library.
Navigate to the Preferences folder and delete com.apple.dock.plist
Logoff, login.

Safari won't open from dock after upgrading to leopard

I've upgraded from OS X 10.4.11 Tiger to OS X 10.5.2 Leopard with the upgrade DVD which arrived today and all the available Software Updates (which included a Safari update). No more Software Updates are available - I've checked.
Safari and Mail will now not open from the Dock. Neither will iChat, AddressBook, iDVD (which produces a pop-up saying it "quit unexpectedly" - it didn't appear to start at all), and iCal. Safari and Mail WILL open from my Applications folder thankfully. I haven't checked the other mentioned applications, except iDVD which does the same non-opening with pop-up from Applications too.
I have run permissions verification and permissions repair from Disc Utility on the Mac HD. I have run disc verification from there too and the result said the disc appears OK. Neither solved the Dock problem.
The icons in the Dock don't bounce or anything. They remain still and un-animated. I just get a pop-up message saying "You cannot use the application "Safari.app" with this version of Mac OS X". Which surprises me as it's a native Apple Mac application isn't it? Obviously it says "Mail.app" for mail, "iChat.app" for iChat etc.
I reinserted the Leopard installation DVD and installed all the applications from the Optional Install.mpkg folder, including Safari and Mail. This has made no noticeable difference: they still won't open from the dock. I have just noticed that an additional icon for Safari appears at the far (right hand) end of the dock when I open it from Applications. But it disappears when I close Safari, so no good for opening it.
It could be worse, I can actually open some of the applications from my Applications folder. But this is inconvenient and besides, it is supposed to work from the Dock.
Has anyone else had this problem?
Can anyone help me to solve it please?
I have backed-up (not using time machine - I backed-up before I upgraded). I hope to avoid having to erase and reinstall but I will IF that will solve this problem (and not cause any others
Help please. Thanks.

Hi
Dock icons are simply alias. The ones on your dock may be corrupted, especially since you can open Safari from the applications folder. To remove an icon, right click on it and select "remove from dock", or simply drag it off the dock, where it will disappear in a puff of virtual smoke.
Then, go to the Finder and single-click/hold any item you want on the dock. Drag it there.
Try Safari or the other apps again.
Specific to the Leopard upgrade, important any 3rd party items installed in your system are Leopard compatible, otherwise you'll have operational problems when using them.
One other thought. It is possible the Dock is corrupted, causing the problem. If the above does not resolve the problem, go to the Finder: Your User Account>Library>Preferences folder. There, move the com.apple.dock.plist and com.apple.dock.db files to the desktop, then relaunch the Finder (hold down the option/command/esc keys to reveal the Quit Panel. Select the Finder>relaunch.
Message was edited by: Hawaiian_Starman

Dashboard widget with streaming video breaks after upgrade to Mountain Lion

Hi. I recently upgraded from Snow Leopard to Mountain Lion. Under SL, I had an OS X widget that was a web clipping of a streaming mpeg image being produced by a Linksys/Cisco WVC54GCA web camera. When I brought up the dashboard, the OS would start streaming the data from the mpeg filename, which looks like "hostname.com/img/video.mjpeg".
After upgrading to Mountain Lion, I noted that the widget never fully loads, indefinitely displaying a "Loading Clip..." mesasge. After deleting and re-adding, I can still get as far as adding the web clipping to the dashboard at the right dimensions, but there's no content.
Unfortunately the camera unit doesn't provide for the display of HTTP access logs, so I can't see if there's an issue there, but my understanding is that if I can display the image in a Safari browser, it should work just fine in Dashboard too. (I did make sure that, where needed, the username/password for accessing the video are included in the URL.)
I did sniff the network traffic between my system and the camera host, and show that video traffic starts flowing between the two as soon as the widget is brought up. So, it's almost like the widget doesn't know when to stop "loading" and start "displaying," perhaps because the HTTP request is never truly "done."
Can anyone speculate if something may have changed in Mountain Lion affecting the ability of web clipping widgets to display streaming video?
Thanks,
Chris

Hi James
I have exactly the same problem with the same "Loading clip" then blank. I have been trying a lot of stuff to get this working, but haven't had the chance of sniffing the network traffic as you have done. By reading what you said about the traffic seems to be flowing without the picure being displayed makes me even more puzzled by this. I never had a streaming video while I were using Snow Leopard, but I had a still-image, as I also do now in Mountain Lion. I recently began to research for a way to display the video.cgi MIME image that my camera produces, and I've also concluded that this should be an easy task for the dashboard web clip function; the video does display in safari after all.
I suspect that our cameras uses the same built in webserver solution written by a "Steven Wu". Cheap webcameras frequently uses his script with MJPEG (stream of JPEG pictures) to avoid the expensive licenses of using other video codecs.
I read this a bit down at this site: http://channel9.msdn.com/coding4fun/articles/Everyone-Loves-Babies-Webcams-and-M otion-Detection
Have you come any closer in your research?
I have started to think that maybe I have to write a dashboard widget on my own to accomplish this.
trelements

Report variants missing in PC00_M10_REC after upgrade from 4.7 to ECC 6.0

After Upgrade to ECC 6.0 from 4.7 version, two variants for Payroll Reconciliation report in PC00_M10_REC are missing.
These variants were of users who have left the organisation/company.
Can anyone help me to restore those variants and tell me why those two variants got deleted.
Thanks in advance
Rohan Das.

Try to use program RSTRANSP , this will create transport request for variants. after creating the variant your basis team can move to ECC box
a®

ALV Layouts are missing in ECC6 after upgrade

Dear Friends,
we have an issue of missing ALV Layouts in ECC6 after upgrade of ECC6 from 4.7 version
For example, we have a custom table ZRCILOT, data displayed using tocde se16, but when we check layout are missing in ECC6 but the same exist in 4.7 version.
please check the attached screen-shots.
kindly suggest, is there any possibility to retrive it.
Thanks,
Munvar Basha.

Hello
Variants should be preserved by the upgrade...
You could export/import layout using the report from the here under note
Regards
551178 - FAQ ALV Layout
During the upgrade of or when importing Support Packages?
Answer: Layouts created by the customer are retained and you can continue to use them.
643330 - ALV layout: Importing and exporting layouts

Transactions missing in Role After Upgrade from 4.6c to ECC 6.0

Hello Friends,
I did multiple searches on this question but it was unsuccessful. We are upgrading from 4.6c to ECC 6.0. We are testing roles to make sure the migrate properly.
Irrespective of su25. There are transactions that are not obsolete and are missing in ECC 6.0
For example if I have a role called FIROLE. Which has 20 tcodes in 4.6c. When we upgrade to ECC 6.0 8 tcodes will be missing. This is not because the tcodes become obsolete.
What is the best way to approach this. Should we be testing each role?
Thanks!

Hello Imran,
transactions can be 'obsolete' also if they still exist.....
If the application developers create new functionality, new look,.... in new transactions but still let the 'old' ones in the system.
Just think about the ME2*-transactions..... The developer can decide, that such new transactions should replace the old ones after upgrade in the roles or let the old ones as they are.
You can get an overview about replaced/obsolete transactions by reviewing table PRGN_CORR2 (make sure, that you have the latest version, according to [SAP Note 991377|https://service.sap.com/sap/support/notes/991377] !!!). SU25 gets its information from that table.
b.rgds, Bernhard

Fonts Missing in Mail after upgrading to Leopard

After upgrading to Leopard, the fonts are missing in the font window in Mail program. I can compose only using what looks like helvetica. This is true only with this program. Any suggestions? Thanks

After an elimination process, it appeared that there was a conflict of some sort on one of the accounts I had and unfortunately, that was the one with the most messages. Its a pain but my only work around it was to start all over again with Mail. If it helps yo, this is what I did: a) backed up my Mail : user/library/mail and backed up the preference file : user/library/preferences/com.apple.mail.plist
b) removed the Mail preference : user/library/preferences/com.apple.mail.plist
c) restarted Mail and created the accounts all over again via the setup helper
d) imported the mail boxes from where I saved them including those in the 'pop' folder
Now I have they old messages available in a folder I renamed 'archived' that is in the "ON MY MAC" section of the side bar.
IT IS TEDIOUS AND I AM PRETTY SURE THERE IS A MORE ACCURATE SOLUTION OUT THERE TO THIS PROBLEM.

T440s + ThinkPad Ultra Dock after upgrade to Windows 10 - no signal

Hi, Yesterday I upgraded from Windows 8.1 to Windows 10 Enterprise. After the inital install I had both monitors working for a few minutes. Suddenly both monitors went in sleep mode and I'm unable to get them working. They are connected via 2 DP cables to a Ultra Dock station. Only way to get a signal (one at at time ) is to use a DP to mini-DP adapter and plug it directly to the computer. I can see that the computer is charging while docked, so there is some sort of connection there. I've searched all over the net for any drivers for the Ultra Dock and T440s which looks like can fix the the signal issue. No luck. Anyone else experienced this issue? Regards, hetterotte

Which Operator and Country SIM card you are using ?Error Code 36 is regular deactivation. Do a Windows update , Restart then Shut Down System and start ( TYhis Power cycles the Device ) . From your Screenshot it Looks like the Cellular Data is not ON and Microsoft cellular service is in some mismatched state after upgrade.After restart press like in below screenshot order 1 --> it turns cellular on or off, 2---> It will take you to settings page 3--> Connect from here. Dont ask why Microsoft made connecting to WWAN device so complex

IPhone 4 Camera Icon Missing, Facetime Unavailable after add Mail Exchange

iPhone 4 running 4.0.1
when my iPhone setup to MS Exchange email account (my company) I noticed that iPhone 4 Camera Icon Missing, Facetime Unavailable. I remove the account from "setting" - "Mail" and all feature came back to normal.
This also happened to my colleague (iPhone 4 FM 4.0) connected to same MS Exchange server.
However; I posted this issue on other forum and other iPhone 4 users don't have the same issue connected to Exchange.
My Company running MS Exchange 2007

Got it working now iOS support Exchange Policy!
http://answers.yahoo.com/question/index?qid=20090617122000AAy6ZwS
Exchange 2007 has active sync policies. One of the options is to disallow the camera.
To resolve the problem do the following.
1) Open Exchange Management Console
2) Click "Organization Configuration"
3) Click "Client Access"
4) On the right you should see your active sync policies. Right click the policy and chose "Properties"
5) Click the "Device" tab
6) Check "Allow camera"
And bingo it works!!!!

My dock icons have dissapear ramdomly after upgrade to Mavericks

After a fresh install of Mavericks I realized that several icons in dock bar have been desapear, they still working but no image of the icon itself. I tried replacing those icons "damaged" by those that are in application or utilities, this work, but after a restart problem appear again.

What OS version did you update from?
Have you tried uninstalling the apps and reinstalling?
I remember with Mavericks was first released here were posts about VLC mot working. I think reinstalling fixed that.

Toolbar icons are not displaying, After upgraded to Acrobat 9.4

Hi All,
We have developed one tool using Acrobat javascript and C++ plugin. It is very well working in Acrobat 9. But after my acrobat is upgraded to 9.4 version. some icons in the toolbar is found missing. I am unable to find the reason behind dissappearing of icons in toolbar. please provide a solution for this problem, The problem continues in Acrobat 7 too , when try to install my tool into it. Is their any specific coding standards or syntactic constructs to be followed for specific versions. Please help me in this regard.

I found the solution, We need to change
some coding style by giving conditions for particular version , foe example we should make changes in color initialisation. Insteatof color.red , use [RGB,1,0,0] and many.........

Widget Icon missing fro Dock after upgrade to 10.6

Similar Messages

Maybe you are looking for