Widget triggers moving around

Don't know how to solve this. really need help so I post it here 2.
Original post.
Please, anyone ...
http://forums.adobe.com/message/5361388#5361388

I'm using the up and down arrow keys to jump between cuts, but for some reason I can jump back beween cuts, but when clips are stepped up it doesn't seem to let me jump forward to the next edit.
I assume you're referring to when you have more than one track with clips on them. In that case, you need to be mindful of which tracks are targeted; that controls which tracks are subject to the Next/Previous Edit commands.
For example:
Any track that isn't targeted will be ignored by the Next/Previous Edit commands. Just click the header "button" to enable or disable a track. Track targeting affects many other operations in Premiere Pro--for example, adding edits or applying transitions. Check out this Help document page for some more info: Targeting tracks
Not sure about the MBP keyboard question, but a Google search for such turned up this: Home and End Keys on the Macbook Pro

Similar Messages

Can an image in the slideshow widgets be moved around inside the bounding box as can be in a normal image placed into Muse (double clicking on a placed image gives the functionality to move the image around - as per Indesign functionality)

Can an image in the slideshow widgets be moved around inside the bounding box as can be in a normal image placed into Muse (double clicking on a placed image gives the functionality to move the image around - as per Indesign functionality)

Can an image in the slideshow widgets be moved around inside the bounding box as can be in a normal image placed into Muse (double clicking on a placed image gives the functionality to move the image around - as per Indesign functionality)

Widget triggers jumps around, drives me crazy!!

http://delta.tinahammar.se/delta/get-better-effect.html#bad-triggers
Again ... why does the triggers jump around. Why can't they just stay the way they are in design mode.
When slideshows go nuts, I usually have to start all over again, and somehow they work. But not this one.
Look at the triggers on the link above.
In designmode everything behaves nice...
After publishing or in preview, things move around. The states of the buttons aren't respected either. On mouse leave the text goes black instead of staying white as defined in "active" state.
The buttons jumps all over the place.
This is happening over and over again ..
This is from another widget that I gave up on ...

http://delta.tinahammar.se/delta/get-better-effect.html#bad-triggers
Again ... why does the triggers jump around. Why can't they just stay the way they are in design mode.
When slideshows go nuts, I usually have to start all over again, and somehow they work. But not this one.
Look at the triggers on the link above.
In designmode everything behaves nice...
After publishing or in preview, things move around. The states of the buttons aren't respected either. On mouse leave the text goes black instead of staying white as defined in "active" state.
The buttons jumps all over the place.
This is happening over and over again ..
This is from another widget that I gave up on ...

Dashboard widgets keep moving around!

I'm guessing it is related to this question: (still unanswered)
http://discussions.apple.com/thread.jspa?threadID=2080780&tstart=0
But for some reason, my dashboard widgets like to shift around on my screen. I even moved them all into a gird into the upper left and corner of my screen so that it no matter what size screen I am using they will always be there. (as apposed to putting a widget in the bottom corner of my 1920 x 1200 monitor, unhooking it and then going back to the 1280 x 800 screen and finding the widget off screen.)
So is there any way to "LOCK" the positions or just stop the random shifting around?
Thanks,
Scott

I just meant open the Dashboard icons you want to use and put them where you want them.
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Macsimum News Associate Editor  Creator of 'Mac611 - Mobile Mac Support'

Photoshop CS2 redraw garbage when moving around an image window on my G4 laptop

Hi.I recently had to reinstall Photoshop CS2 onto my Mac Laptop 1.5 GHz PowerPC G4, running system 10.4.11, which required a new hard drive after the old one died. I am immediatly encountering a serious redraw/image repositioning problem in Photoshop that I have never seen before, and in Imageready as well. This does not happen in Macromedia Fireworks 8 however.
I am zoomed into an image. Using the hand tool, or the scroll bars or the arrows, as soon as I move an image little messed up line graphic glitches appear and stay in place for the remainder or working with an image, and ultimately covers the image completely after moving around within it a number of times. you can see examples of this in these screenshots I've uploaded:
http://pixeljam.com/temp/photoshopRedrawGarbage/moveGarbage04.gif
http://pixeljam.com/temp/photoshopRedrawGarbage/moveGarbage03.gif
http://pixeljam.com/temp/photoshopRedrawGarbage/moveGarbage02.gif
and the lines stay the same size and position even when zooming in. here's the same image w/ the same defects zoomed out and in:
http://pixeljam.com/temp/photoshopRedrawGarbage/moveGarbage01.gif
http://pixeljam.com/temp/photoshopRedrawGarbage/moveGarbage01_zoomed.gif
I've tried trashing & re-installing photoshop completely, tried running it before the updates needed from the original Photoshop application disk, and after. still the same problem.
This occurs only when using the laptop on its own. When I hook it up to my Apple Studio Cinema Display, it works fine. The problem does not occur on the Cinema Display OR the laptop screen! it's very odd. Basically, the laptop is now something I cannot actually use away from my desk until this is resolved.
Has anyone ever encountered this or possibly have any suggestions or advice? Thanks so much!
-Rich
And here are some more specs on my computer & hardware:
Hardware Overview:
Machine Name: PowerBook G4 12"
Machine Model: PowerBook6,8
CPU Type: PowerPC G4 (1.5)
Number Of CPUs: 1
CPU Speed: 1.5 GHz
L2 Cache (per CPU): 512 KB
Memory: 1.25 GB
Bus Speed: 167 MHz
Boot ROM Version: 4.9.0f0
Serial Number: 4H5456AZRJ7
Sudden Motion Sensor:
State: Enabled
Version: 1.0
GeForce FX Go5200:
Chipset Model: GeForce FX Go5200
Type: Display
Bus: AGP
VRAM (Total): 64 MB
Vendor: nVIDIA (0x10de)
Device ID: 0x0329
Revision ID: 0x00b1
ROM Revision: 2122
Displays:
Color LCD:
Display Type: LCD
Resolution: 1024 x 768
Depth: 16-bit Color
Built-In: Yes
Core Image: Supported
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Cinema Display:
Display Type: LCD
Resolution: 1680 x 1050
Depth: 32-bit Color
Core Image: Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
DIMM0/BUILT-IN:
Size: 256 MB
Type: Built-in
Speed: Built-in
Status: OK
ATA Bus:
MATSHITADVD-R UJ-845E:
Capacity: 1.72 GB
Model: MATSHITADVD-R UJ-845E
Revision: DMP2
Serial Number:
Removable Media: Yes
Detachable Drive: No
BSD Name: disk5
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
OS9 Drivers: No
S.M.A.R.T. status: Not Supported

Hi. Thanks for your responses. There is definitely some incorrectness in the info I provided about the computer. for the Hard Drive, it's odd.. I copied and pasted that from my system profiler.. In actuality the Hard Drive is 74.53 GB. Not sure how that error occurred.
Also I looked again at the computer's memory. I forgot the second larger 1GB memory card when I was copying and pasting from the system profiler. Sorry about that. I was in a but of a rush to get the question out.
DIMM0/BUILT-IN:
Size: 256 MB
Type: Built-in
Speed: Built-in
Status: OK
DIMM1/J31:
Size: 1 GB
Type: DDR SDRAM
Speed: PC2700U-25330
Status: OK
Another thing I noticed about the problem I'm facing is that it leaves defects from mouse trails as well in the image window. None of the defects are lasting nor will they print. I close the file and they go away, if I zoom, they stay the same size. I'd agree, it sounds like a video card problem, but the reason I posted here is that only in photoshop and imageready do these problems occur. My guess, if it's the video card is that they are just programs that require more of the system. why my video card would be crapping out now, I have no idea. but I guess that's how it goes.
But why would it work fine when hooked up to the apple cinema display? even on the laptop screen itself the problem is not present. only when the laptop is on its own.
The computer has served me very well for almost 3 years without this problem, so that's why it's something that is not a normal problem that should be expected from this computer. I am grateful to have it & can't afford a new one.. this one is still sitting on my credit card balance. Thankfully I am under the applecare protection plan and will bring it in to the local Mac shop on monday and demonstrate the issue to them.
Thanks for your replies.

Not happy with moving around keys on the timeline

I just changed from Final Cut to Premiere CS5.0 and I really like it. Working on a Macbook Pro i5 2.3GHZ, Mac OSX 10.7 But I am not happy with moving around on the timeline. I was used to using the up and down arrows to move to next video edit point, marker point or audio edit point. I tried everything to change it, highlighted the track etc. It only works together with the FN key, which is a bit uncomfortable. And then it definetely is not going to any audio edit points (very annoying!!!) and marker points (have to use Q and W keys). It makes me doubting if continuing with Premiere or not. Its such an esencial and easy to use tool while editing in a normal fast editing rythm. When I change it in the customize keyboard menu, into a Custom keyboard or FCP keyboard, it would ignore my changes on the arrowkeys, although it recognizes any other changes I do. Is it so complicate to change this issue in Premiere to how it is set in FCP? Its such an obvious tool, using the arow keys to move around, cannot beleive that we have to live with such a limitation. Please!!!

Its such an obvious tool, using the arow keys to move around, cannot beleive that we have to live with such a limitation. Please!!!
You dont have to live with that at all if you are fixed only to what you have previously done.
It makes me doubting if continuing with Premiere or not.
There ya go!

I can't sync my ipod to itunes. It looks like it is going through all the steps to sync but nothing happens. The music I moved around is not going where it should

I can't sync my ipod to itunes. It goes through all the steps to sync but it does not sync. The music I moved around does not go where I put it. It shows up in itunes (when changing music around) but does not change it on my ipod. Can someone help me?

Sync Session Failed to Start iTouch iOS5: Apple Support Communities
iphone could not be synced sync session failed to start...: Apple Support Communities
and
Can't connect to the iTunes Store

How to deal with moving around like in gta2?

Hi there,
I'm programming an game but i was wondering how to deal with moving around like in gta2.
my game is also top-down with you(tha player) constantly in the middle of the screen. I know how to deal with button press etc.. but how to calculate how manny pixels the map has to move in the x and y axis...
It's difficult to explain for me.. but hope the picture is clear..
greetings

I was afraid for this one already.. the picture is not clear:) thanx for your response so far.. I will try again.. with the game gta2 in mind:)
see this screenie: http://www.vollversion.de/bilder/705_1_full.jpg
My game looks the same as gta2 top down... with the character in the middle of the screen(the one firing the flame thwower )(the player). if i press up he walks towards the police car.. if i press left or right.. he only turns around(an combination of pressing up and left is also posible) thus the character walks in the direction he's facing.
Now i would like to know how did they do this? how to programm such a movement? Because the character is standing constnatly in the middle of the screen the map has to move like in almost every game... how to calculate the x and y axis movement of the map?
Please.. try agian.. hopefully the screenie will help.

Windows Crashes with JRE 1.4.2 When Moving around JDialog

Hi!
I work on a Java Applet/application that was originally written to run on java 1.1 -- only AWT that too. Recently I managed to convince my manager (and his manager and his manager) to migrate from the AWT framework on java 1.1 (Microsoft JVM that is ) to Swing/JFC on Sun Java 1.4.2 ... it took a lot of explaining, demostrating, begging, pleading etc., to get this project funded.
Now, my app is all developed in JFC and ready for deployment and during testing found a potential show stopper -- When a Dialog Box or any moveable componant (internal windows etc) is moved around (holding down the mouse on the title bar of a dialog and dragging it around), the OS simply froze up ... nothing could be done other than power cycling the PC. Does anyone know if its a bug in JRE 1.4.2 and if it has been fixed?? This could potentially result in rolling back to AWT :(( .... and of course me looking like a fool in front of my manager!!
..... Please provide any suggestion other than moving to JRE 1.5.x beta. I've also noticed this happening in other Java Applications (Netbeans for example). So, I think this is a major bug the JRE 1.4.2.
A million thanks and few Duke Dollars for anyone pointing me in the right direction.
Note:
1. This problem is not just with my app ... some other java apps that are installed on my workstation (like netbeans) behave the same when Moving Around dialog boxes.
2. The behaviour is very random. But it has happened multiple times (and the very first time my manager run our app on jre 1.4.2)
I would give a million dollars if I had them. But for now, please do with the million thanks and few duke dollars.

Have you tried this on another machine?Yes ... actually this has happened on a few workstations here ... all of them are Pentium IV based dell workstations running Windows 2000.
What exact version of 1.4.2 did you download?Java(TM) Plug-in: Version 1.4.2_04
Using JRE version 1.4.2_04 Java HotSpot(TM) Client VM
Have you searched the bug database? This one could be related to yours:
http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4673572
This sounds similar but the difference is its not just the app that feezes up (so that you could do an alt+ctrl+del and kill it)..... the OS freezes up and you can move the mouse around still the system even queu e is not full and eventuall all I hear is the beeping. At this point I've to power cycle.
Is there any way you could post the code or is it too big? Or, have you tried just creating a very small >application or applet that just shows one dialog, and if so, does that show the same problem? (What I'm >trying to get at here is - is it something in your code that is causing this, or something in the JRE, or >perhaps something to do with your machine's configuration/OS?)Unfortunately I cannot post the code ... its company rules and regulations. I've tried creating a very small app and it appears to work ok .... but randomly causes this freeze up. There is no definate pattern (except that it happens when you move around a JDialog or a JInternalFrame) . It could freeze up some time and work perfectly fine at other times. It has actually happened on other applications too (Netbeans, JEdit etc). That's why I suspect this might be a obscure bug in the JRE.
I'll try to find a pattern so that it can be re-produced by everyone.
Thanks for the help.

Why when I am converting a word doc into a PDF are some of the pages moving around. It appears to be

Why when I am converting a 50 page word doc into a PDF using Acrobat XI Pro the pages are moving around.
It appears to be happening in the places where the previous page is not a complete full page, just a half page.
It is moving these pages up into the previous half page, but it is only moving them several lines into that page
Which has totally distored my e-book.
It is attaching all my pattern sheets at the very end of the file okay, etc.

Also, to be more sure you get in the PDF what you are seeing in WORD, go to the print menu and select the Adobe PDF printer, then go back to editing. The is a feature of almost all word processors to reflow the document for best results with the attached printer. It is also one of the problems of using WORD forms that such form designers miss. If you don't like the reflow, many the Adobe PDF printer your default and always print to Acrobat. If you want it to go to a printer, then print from Acrobat to that printer and it should remain intact. The other way to avoid the reflow is to use a layout program like Publisher or InDesign.

IPad mini keeps clicking when open and green bars highlight and keep moving around the screen

MY iPad mini when open keeps clicking and a green bar keeps moving around the screen highlighting things, how do I stop it?

Go to Settings > General > Accessibility > Switch Control and turn this OFF.

Ipad mini screen keeps moving around and switching screens as though someone else is using it? any ideas what is going on?

Ipad mini screen keeps moving around as though someone else is fiddling with it while I am using it. Any ideas what is goi g on?

Hi Deeveeay,
Try resetting the device (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). When the Home screen redisplays, see if the issue has resolved itself.
Cheers,
GB

I created an album from photos taken off three different cameras. I am sorting the photos manually and when I close iPhoto, the photos move back either by date or by camera import time. How can I keep the photos from moving around?

I created an album from photos taken off three different cameras. I am sorting the photos manually and when I close iPhoto, the photos move back either by date or by camera import time. How can I keep the photos from moving around?

Don't tell us, tell them
http://www.apple.com/feedback/macosx.html is the place for feature requests and feedback

Problem with parallax scrolling moving around randomly

I have an ipad air. My problem is with the parallax scrolling. It just seems to be moving randomly around the screen even when the ipad is steady and it's quite difficult to get the ipad to change orientation when I stand it on its side. I've reset the ipad and turned it on and off a few times. Has anyone been having this problem and know how to fix it. I know you can turn it off but I don't really want to.

Hi there
I am experiencing the exact same problem with my Ipad Air. Did you manage to find a solution yet? Im hoping it isnt a hardware problem either. Orientation not really co-operating. Background image moving around the whole time as if trying to settle, even when device dead still?!
Please do let me know
Thanks
Greg

When I connect my canon Hd vixia to upload media. My windows start moving around franticly and I hear this ticking sound. What am I doing wrong?

Loging & Transfering
When I connect my canon Hd vixia to upload media. My windows start moving around franticly and I hear this ticking sound. What am I doing wrong?

Hard to tell from here. This would be a first.
How is the camera connected and is it or anything else touching your keyboard?
x

Widget triggers moving around

Similar Messages

Maybe you are looking for