Widgets on my desktop using dev-mode not working in Lion

I'm trying to get iStat back ontop of my desktop like I had in Snow Leopard. Dev-mode not working to bring widgets forward anymore. Any Ideas how to do this in lion? In Snow Leopard it was defaults write com.apple.sashboard devmode YES now that isn't working.

When I connect my MBP (mid 2010) to iMac 27" (mid 2010), via Mini DisplayPorts, after pressing Command+F2, iMac screen went "blank" while MBP screen stays "blue" for few seconds and went back to normal. How to solve this problem?

Similar Messages

Blue screen on start up. Safe mode not working?

Blue screen on start up. Safe mode not working, any suggestions?

Thank you, I had forgotten about target mode. I was able to back up all of my files. I also copied some additional 50 GB of files of the disk as a stress test and the hard drive worked fine and quick (and because it was quicker than retrieving the same files from a network drive to my desktop).
I was hoping to also unpack the Applejack files on my desktop and put them back so I could run them in single user mode without running /etc/rc. However I haven't been able to get my Linux desktop to mount the iBook in Read-Write instead of Read-Only yet (I don't have access to another Mac at the moment).

After installing iPhone Configutilities in my Mac, Personal Hotspot using USB is not working! Please help, I am using 10.7 Lion OS

After installing iPhone Configutilities in my Mac, Personal Hotspot using USB is not working! Please help, I am using 10.7 Lion OS

Did you talk to your carrier?

Windows Server 2012 - Printing using UNC path not working

Hi,
I have a problem printing using the printer's UNC path ("\\Server_Name\Printer_Hostname") to work with a web
app hosted on IIS 8. With a windows forms application the UNC path is working fine and the app prints.
With
the web app I receive an error "The data area passed to a system call is tool small".
Also,
in the event viewer under Applications and Services Logs -> Microsoft -> PrintService -> Operational, I receive the error "The print spooler failed to reopen an existing printer connection because it could not read the configuration information
from the registry key S-1-5-82-1980832875-2702362896-1795126167-3622310632-1152289074\Printers\Connections. The print spooler could not open the registry key. This can occur if the registry key is corrupt or missing, or if the registry recently became unavailable."

I have contacted IIS forum support.
Please review the link: http://forums.iis.net/p/1213109/2079229.aspx?Re+Windows+Server+2012+Printing+using+UNC+path+not+working
Their final response:
Printing from ASP.NET using System.Drawing.Printing itself is a horrible approach, as this namespace was designed for Windows Forms only. The designers did not take everything about ASP.NET in mind, so any issue can happen. That can answer why the HP model
works while the Samsung fails, as the HP one just "happens
to work",
http://msdn.microsoft.com/en-us/library/system.drawing.printing.printdocument.aspx
Similarly, System.Printing was designed just for WPF.
About which printing API to use in ASP.NET/IIS, there is no clear answer so far. Thus, your only resource is Microsoft support, who can perform further analysis (with their dedicate utilities and of course Windows source code) and might come across a solution
to help you out. This is not a trivial scenario.

Where used list is not working for IMG nodes/Document in solar01

hi experts
In template project , we are using same IMG objects in different business processes and subsequent configuration document is attached to each IMG node in configuration tab. ( like same IMG node - define order types used in different business process configuration tab )
when i use " where used list " from the configuration tab , its not showing the IMG objects used in different business processes in the same project. whereas its showing the IMG nodes used in the different project.
I need to find out the same IMG objects/ document used in the same project using the " Where used list " button.
Please provide your answers
Note : we have linked one configuration document to same IMG nodes used in different business. " where used list " also not working for documents as well
Thanks
Sol man

Hello there,
I just tried some tests and couldn't face any problem with locating other usages for the objects in configuration tab.
You mentioned a configuration document, so have in mind that the document usage will only be considered if it is a link to the same document and not just a copy.
e.g:
Here I created a document in this node:
Then I added it as a link here:
and as a copy here:
When I go back to the original node and use the where-used, it'll only show the original and the link:
This happens because after copying a document, it is considered as a new one instead of another usage of the original one.
best regards,
Fabricius

I keep getting a message that my ipad could not be activated because activation server is unavailable and when i try to use itune its not working as well.Plssss help

i keep getting a message that my ipad could not be activated because activation server is unavailable and when i try to use itune its not working as well.Plssss help

Has this iPad ever been jailbroken, had the OS rolled back, or used a beta version?

Validations using OB28 is not working for GL posting using FB01

Hi Experts,
Validations using OB28 for posting using FB01 is not working.
My requirement is after entering a line items and click post validations should be triggerd.
i want to block a posting based on document type.
i have maintained as below..
Prerequisite.
( BKPF-TCODE = 'FB50' OR BKPF-TCODE = 'FB01' ) AND (
BKPF-BUKRS = '1000' OR BKPF-BUKRS = '0001' OR
BKPF-BUKRS = '0002' ) AND BKPF-BLART = 'XX'.
check.
Used userexit to check sy-ucomm = 'BU' (for posting).
entries are maintained in OB28 for relevant company codes.
it is working for FB50 but not FB01.
same thing i tried to maintain at header level as well as item level. but it is working only for FB50 but for FB01.
Please help me.
Regards.
Venu.

Hi Venu,
Go to GGB0 and expand the navigation till you reach the validation name of line item level and choose menu item *Validation -> Simulate.
Here you can enter the inputs, those you are entering while doing FB01 and execute it.
Then in the results, you will have the log for each step of your total validation of line item level.
Check , whether your questioned STEP's pre requisite is met and check is not fullfilled.
Accordingly you can make the changes to the STEP.
This info may help you.
Regards,
Srinivas

Security and privacy system preferences not working after Lion install. What to do?

Security and privacy system preference not working after Lion install. Not sure if it happen with Lion installer or after updating. What to do?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” (without the quotes) and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

External Hard Drive does not work with Lion

Hi
My External Hard Drive does not work with Lion this message appears:
NTFS-3G could not mount /dev/disk1s1
at /Volumes/My Passport because the following problem occurred:
/Library/Filesystems/fusefs.fs/Support/fusefs.kext failed to load - (libkern/kext) link error; check the system/kernel logs for errors or try kextutil(8).
the MacFUSE file system is not available (71)
can anyone help?

Hi,
See this Discussion:
https://discussions.apple.com/thread/3191198?start=0&tstart=0
Cheers,

Wish I would have known Quicken 2007 would not work under Lion OS. I had no reason to believe it wouldn't. Any ideas for me?

Wish I would have known Quicken 2007 would not work under Lion OS. I had no reason to believe it wouldn't. Any ideas for me?

I switched to Essentials while using Snow Leopard in anticipation. Data conversion was pretty good. Nothing critical was lost, but I did have to reassign some budget catergories for past transactions. It was a good opportunity for some cleaning up that I should have done anyway. They have a 60-day return policy on the Quicken web site which was key to my purchase decision.
I am not affiliated with Quicken in any way other than as a customer. I'd have preferred it if they had updated 2007 but they didn't!

T mobile broadband stick not working after lion instal

T mobile broadband USB stick not working after lion install

No s#!t batman.The point is a mac laptop is ment to be mobile and for it to be mobile you need a mobile broadband stick so when a new op system lion is released don't you think it would be one of the first items to be checked for compatability.with snow leopard the same problem took months before I could use a broadband stick,there is no lion connection manager software available right now until someone decides to wright it, so does anyone have a usefull fix i can use ?

Tascam US-428 not working with Lion

Tascam US-428 not working with Lion - Does anybody know why and what I can do to fix it?

The Tascam US-428 is a great unit, but like all businesses, Tascam desires to keep you purchasing their equipment and not stay with your old legacy items. If they would consider servicing legacy units, possibly most may stay with Tascam. But this keeps the machine moving when you "force" customers to upgrade their products when new technology shifts..
The "only" reason US-428 users need to upgrade and put aside the unit is if they need 64 bit functionality. I did not have crashing when I loaded Logic in 64 bit mode due to the ability to access my 8 gigs of memory...and is the "only" reason why I need to go 64 bit. 32 bit functionality is limited to 4 gigs of memory. Lion by default is 64 bit, so that is a plus.
But...if Tascam would continue to service some of the legacy units like the Tascam US 428, then some of us would not go to their competitors and may stay brand loyal. I think Alesis has something simular and along the same portability as the Tascam US 428, so some might have to jump ship with Tascam.
If enough people called up Tascam asking about the US 428 or surfs their website and looks for the US 428 (I am sure they keep track of where people are going on their site), they might reconsider....
I have been a Tascam user for may years, but "if" they would put out a driver for the US 428 for Lion, I may stay with them...but they leave us with little choice but to look for something else...they do not have something comparable to the unit right now.

Safari is not working in lion. I get the message not responding. Please help.

Safari is not working in Lion. I get the spinning ball. Please help.

We do not provide support for bugzilla here. Please visit http://www.bugzilla.org/ to find out how to get help.

Adobe Photoshop CS5 is not working with Lion.

Adobe Photoshop CS5 is not working with Lion. It is totally non responsive to a point where i cannot work. all other CS5 programs seem to be running well so far. any advice? if no, then how do i revert back to Snow leopard?

I had real problems with all Adobe apps - it said I needed to install a version of Jave Runtime, but kept saying that I wasn't connected to the internet to complete the action. This was not the case - I was connected to the internet.
I followed this link : http://support.apple.com/kb/DL1421 to install a version of Java and all Adobe apps fire up now. Haven't done much testing within the apps, but at least I'm further ahead than I was.
So thanks to the message boards for helping me out.
Reg

IPhoto 9.1.5 slideshow is not working on lion

Hi,
my iPhoto 9.1.5 is not working on lion. I have upgraded from Snow Leopard to Lion. If i click on slideshow then it seems to be started with full screen but it return back without slideshow.
Waiting for any clew.
Moshiour

For iPhoto 9.1.5:
http://support.apple.com/kb/HT4754
Regards,
Colin R.

Widgets on my desktop using dev-mode not working in Lion

Similar Messages

Maybe you are looking for