WiDi not working. How do I set up my domain to get it working?

We are attempting to implement Win 8.1 and WiDi at our new office build. It appears we have issues with the Domain blocking us out. Any advice on where to start is appreciated.

Hi,
We hope your issue has been resolved
Refer to WDT Ops's answer in this thread, They took a completely blank group policy and applied it to the Surface and it worked. That was with the firewall OFF.
https://social.technet.microsoft.com/Forums/en-US/8a1060b2-2e79-49b4-bcca-76c15a639513/miracast-broke-after-connecting-to-domain?forum=w8itprogeneral
Regards,
D. Wu
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

I have a AT&T wifi box and it is turned on and when I go to the setting to go to it it's not there how do I fix that so I can get back on my wifi

I have a AT&T wifi box and it is turned on and when I go to the setting to go to it it's not there how do I fix that so I can get back on my wifi

Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

HT204053 for some reason i have more than one apple id, not sure how, must have set one up ages ago and forgot about it. can i delete one, or merge them? how do i know im not going to lose info if i delete one account?

for some reason i have more than one apple id, not sure how, must have set one up ages ago and forgot about it. can i delete one, or merge them? how do i know im not going to lose info if i delete one account?

You can neither merge or delete them. Pick one and stop using the other. If they both have purchases associated with them you will have to keep using both.

I use Mac Mail. How do I set up an email to get a delivery or read receipt?

I use Mac Mail. How do I set up an email to get a delivery or read receipt? In other words, I want to receive automated confirmation that the email was either delivered, opened, or both -- which you can do in Outlook. I was not able to find this option in the Mail menu.

Unfortunately OS X Mail does not offer this feature as far as I know. With Apple failing to offer that feature up until now I highly doubt it'll happen in the future :/

I just got an iPod touch 4th generation for my daughter. I already have a iPhone 5 setup with iTunes. All I want to put on her iPod is music and apps. How do I set the iPod to only get that information using my iTunes?

I just got a new iPod Touch 4th generation for my daughter. I have a iPhone 5 that is already set up on iTunes. The only thing I want on her iPod from my iTunes is music and apps. How do I set her iPod up so that it only gets that information? Do I set it up as a new device? If so will that alter my iTunes?
Thanks.
llfit

You can set up more than one device on your computer, and iTunes will remember the settings for each of them:
How to use multiple iPods, iPads, or iPhones with one computer
But you'll have to use your Apple ID to sync bought media to her device. Disable all other things you don't want to sync like photos, contacts, etc.

How can i set action on UITaBar and get event from that

Hi All,
I m doing one apps in which i have to add three UITabBarItem and this is UITabBarSystemItem.
Now i cannot understand that how can i set action and get event from the?
And how can i set various views on three tab bar item.
I have to use UITabBar means i have to use UINavigationController+UITabBar
My code id
tabBar =[[UITabBar alloc] initWithFrame:CGRectMake(0,370,320,50)];
tabBar.backgroundColor =[UIColor blackColor];
UITabBarItem *search =[[UITabBarItem alloc] initWithTabBarSystemItem:UITabBarSystemItemSearch tag:0];
UITabBarItem *recents =[[UITabBarItem alloc] initWithTabBarSystemItem:UITabBarSystemItemRecents tag:1];
UITabBarItem *favorites =[[UITabBarItem alloc] initWithTabBarSystemItem:UITabBarSystemItemFavorit es tag:2];
tabBar.items =[[NSArray arrayWithObjects:search,recents,favorites, nil] retain];
tabBar.selectedItem = search;
[myView addSubview:tabBar];
[tabBar release];
I add a action:
UITabBarItem *search =[[UITabBarItem alloc] InitWithTabBarSystemItem:UITabBarSystemItemSearch tag:0 action:@selector(select:)];
So it error: Warning -no'InitWithTabBarSystemItem:tag:action:' method fount
So any can help me regarding it?

Thanks RickMaddy very much.
I read and do with sample at the View Controller Programming Guide . But when run it only view TabBar with title but haven't got any TabBarItem on it. I searched a few example about TabBar and i did, but i want do a form with a button then press on button it view a form with 2 TabBarItem on TabBar and press each TabBarItem will show correlative form page 1, page 2.
UITabBarController *tabBarControl = [[[UITabBarController alloc] initWithNibName:nil bundle:nil] autorelease];
tabBarControl.title = @"Tab bar";
ViewControl1 *view1 = [[[ViewControl1 alloc] initWithNibName:@"ViewControl1" bundle:nil] autorelease];
ViewControl1 *view2 = [[[ViewControl1 alloc] initWithNibName:@"ViewControl2" bundle:nil] autorelease];
tabBarControl.viewControllers = [NSArray arrayWithObjects:view1,view2,nil];
[self.navigationController pushViewController:tabBarControl animated:YES];

How to cancel "set up personal domain"

Does anyone know how I cancel the "set up personal domain" in iWeb 2.0? I changed my mind halfway through the set-up process (I clicked Personal Domain in my Account Settings, entered my domain name, but haven't defined my CNAME on my registrar's website). Now it looks like I can't access either my iWeb files OR my personal domain name! Thanks for your help!
Sharon

Help!
I am struggling to get my domain name set up.
Domain: www.west3.org
.Mac website: http://web.mac.com/mrcommitment/West3_residentsAssociation/Welcome.html
CNAMe record set up with Dotster as
web.mac.com.west3.org CNAME www.west3.org
All is set up as above and I've waited the requisite time, name servers are as required by Dotser
BUT no access to via personal domain.
Any advice welcome
Ben

How can I set the textbox properties to get only integer on netbean?

I use Netbean GUI and I create the swing textbox how can I set it to enter only Integer I don't want the people to enter the string.

Please ask netbeans questions on the netbeans forum.
Sounds like you want a JFormattedTextField or maybe a JSpinner.

One month unlimited world-wide not working

I have taken advantage of the Skype offer for one month's free world-wide use that was offred as part of the thw Windows 8 upgrade.
I tried to ring a Switzerland mobile number but it rejecetd it based upon my current balance (Non one month free).
I looked at the premium subscription fine print and it said that mobile access may be available with this but would be informed at the point of subscribing. I did not get any such information.
Should I be able to ring a mobile in Switzerland on this?
Cheers

Hi,
No unfortunately you can't.
Subscription covers calls to:
Argentina
Australia
Austria
Belgium
Canada - (incl. mobiles)
Chile
Croatia
Czech Republic
Denmark
Estonia
Finland
France
Germany
Greece
Guam
Hong Kong SAR - (incl. mobiles)
Hungary
Ireland, Republic of
Israel
Italy
Japan
Korea
Luxembourg
Malaysia
Netherlands
New Zealand
Norway
Poland
Portugal
Puerto Rico
Russia - St Petersburg
Russia - Moscow
Singapore - (incl. mobiles)
Slovakia
Spain
Sweden
Switzerland
Taiwan
Thailand - (incl. mobiles)
United Kingdom
United States - (incl. mobiles)
Venezuela
If my answer helped to fix your issue, mark it as a Solution to help others.
Thank You!
Please send private messages only upon request.

My iMac keeps getting networked by someone. Not sure how they are setting up Bluetooth PAN, VPN and now Adobe which will share my computer info online. I've locked it down, shut off file sharing, made everything inactive except Ethernet connection. How??

An ip address keeps showing up in the proxy setting under the "Bypass proxy settings for these Hosts & Domains." I keep erasing them and they pop back in.

An ip address keeps showing up in the proxy setting under the "Bypass proxy settings for these Hosts & Domains." I keep erasing them and they pop back in.

HT204053 I only have mobile me in my system preferences and not icloud, how do I set this up on my macbook

Hi, I am having problems conecting my iphone to my computer, there is a problem with the connection. I have signed up for Icloud on my phone and have purchased more storage. I am having trouble syncing all of it together. In my system pref I only have mobile me and no icloud. What can I do to sync al my data??? Any help would be great. On my phone it says backing up but it has taken over 10 hrs of thinking and nothing has backed up????? Thanks for your help, Kind reagrds Kerrie

iCloud is not available in Snow Leopard 10.6.x. You need OS X Lion or Mt Lion to gain access to iCloud.

I am in thailand but i want web pages to load in English not thai. how can i set this up?

please advis ehow i can set web pages to load n English . i downloaded firefox in thailand but i want to have web pages in Engish

Download the English version from here: http://www.mozilla.com/en-US/firefox/all.html

I just upgraded to the new 4, but not sure how to make sure all my apps (purchases) get over to the new phone from iphone 3. can't seem to find instructions. thanks.

I just upgraded to the new iphone 4, but am hesitant to get it plugged in b/c I don't know how to make sure all the apps purchased on my iphone 3 get to the new phone. can't seem to find instructions so I'm sure it just "does it", but hesitant to literally pull the plug. thanks.

Follow these instructions: iPhone: Transferring information from your current iPhone to a new iPhone, http://support.apple.com/kb/ht2109

Aspect ratio not working properly, and also, my final dvd has wierd ghosting

Hi,
I just can't seem to make a project work with encore. It's very touchy it seems. I have several videos that I tried to put together in a dvd, but I was having problems with the aspect ratio. Even when I used "Interpret Footage", the videos would incorrectly scale, most of the time to 4:3. At first they would look fine, but after transcoding, they would distort and sometimes be cropped on the 16:9 timeline I was using, or sometimes they would pop to 4:3 with black bars on the side.
It seems Encore NEVER gets what kind of video I'm using, even when I manually set the PAR in the Interpret Footage dialog.
So my solution was to bring everything into After Effects, render it back out as uncompressed AVI and use encore to make a dvd image which I then burned. My settings for this movie were 720x480 with a 1.2 PAR. The wierd thing is, I rendered two movies out in this way, Encore understood that one of them should be widescreen, but not the other. What gives?
I still had to do some tricks in Encore to get it to understand that these should be widescreen movies, and when I finally got them transcoded and looking right in my 16:9 timeline, I made an image. Then I burned it. Then I looked at it on a tv and I swear, every piece of text and or image had haloing on it.
Can someone tell me if this is a problem in my workflow? Encore is so confusing, I just want to know what the best method to making a simple dvd is. I don't want menus or any of that, just a dvd that loops. I can make one, but the quailty sucks. can someone tell me what I am doing wrong?
Thanks in advance,
Stan

I think I'm onto something. I exported form After Effects as an Mpeg2-DVD so I end up with
*.m2v files.
I had set those in AE to be 16:9 aspect and when I imported them into Encore they popped right into my 16:9 timeline with no problems. and the final build went way easier too, way faster.
Then I looked at my dvd on the tv and it still didn't look so great. But when I compared it with similar dvds that others had done, theirs had jagged edges on text as well and I thought, is this because I'm using Standard Definition?
I'm very new to this, so maybe I'm expecting too much. My images on the dvd play back fine on the TV, but the text doesn't look great.
Also, maybe I'm not sure how best to set up my video. When I play my movie back on the TV (A Samsung) and I select the pictures size of 4:3, my video is centered with black all around, but it's 16:9. I have to hit P Size two more times taking the TV first to 'widescreen' (which makes my image look stretched), then to zoom which makes my image fill the TV screen. I think some of my quality issues have to do with this scaling. Is there a way to make my dvd fit the full screen on 4:3 aspect on the TV?

Skype Video Chat Not Working

I can't seem to video chat on Skype on my MacBook Pro 13' with Retina Display. The Preference setting shows Face Time being used for video but it's blank. How do I trouble shoot this? Please help! I've been trying to fix this for so long.

hey dominic pls read this, its the new update which has caused it
Hey all!
After some investigation, we have found that the OSX 10.8.5 update is missing a specific file that would allow some apps such as Skype or iMovie to access the built-in facetime camera on Mid-2013 MacBook Airs.
At this point, we are not sure how this can be fixed, and we'll get in touch with Apple to see how we can solve this.
From our tests, however, external webcams should work. It's not the best workaround, but until something gets fixed, that is the only known (and hopefuly temporary) solution.
For the more tech-savvy readers:
The 10.8.5 update updated a CoreMediaIO plugin that accesses the MBA camera, but didn't bundle the 32-bits version of it.
Other (older and newer) versions of the OS do include a universal version (32 and 64 bits), but not 10.8.5.
This means 32-bits apps such as Skype or iMovie cannot load the plugin, making the built-in facetime camera invisible to these them.
Thibault
Skype for Mac Engineer

WiDi not working. How do I set up my domain to get it working?

Similar Messages

Maybe you are looking for