Width of Report view changes in Oracle Workspace

Hi,
I'm having a problem with BI publisher. With some reports for example the Inventory Adjustment standard report supplied with Oracle retail and BI publisher when selecting values of parameters in the dropboxes and fields the paramter fields width changes and you have to side scroll to reach the end of the report.
This problem is in Oracle workspace when opening BI publisher reports. It only seems to affect certain reports.
So when selecting the first paramter and generating a report the width of the report and paramter field above is as wide as the screen resolution.
But when selecting a secondary paramter for example to get a more fine grained view of the report the entire report field including the paramter field doubles in size and you have to scroll far sideways to see the right side of the workspace and the report field.
Has anyone else encountered this issue and are there any suggestion on how to solve this?
Best regards,
Gustav

Bump.

Similar Messages

Problem configuring the OBIEE Report Viewer Portlet to Oracle Portal!

Now we plan to configure the OBIEE Report Viewer Portlet to Oracle BIEE.what i refre is http://www.rittmanmead.com/2007/09/integrating-oracle-bi-answers-and-oracle-portal/
But after i deploy it and add the biee portlet to oracle portal and enter the biee reoprt path,tell me the error '(500)Internal Server Error '
I have check the applicaion.log,the error below:
11/12/18 00:55:26 BIEE: [id=84609988305,3] EXCEPTION THROWN: Exception:
org.apache.axis.ConfigurationException: No service named SAWSessionServiceSoap is available
org.apache.axis.ConfigurationException: No service named SAWSessionServiceSoap is available
at org.apache.axis.configuration.FileProvider.getService(FileProvider.java:233)
at org.apache.axis.AxisEngine.getService(AxisEngine.java:311)
at org.apache.axis.MessageContext.setTargetService(MessageContext.java:755)
at org.apache.axis.client.Call.invoke(Call.java:2671)
at org.apache.axis.client.Call.invoke(Call.java:2424)
at org.apache.axis.client.Call.invoke(Call.java:2347)
at org.apache.axis.client.Call.invoke(Call.java:1804)
at com.siebel.analytics.web.soap.SAWSessionServiceStub.impersonateex(SAWSessionServiceStub.java:540)
at com.siebel.analytics.web.portlets.jsr168.SAWConnection.init(SAWConnection.java:80)
at com.siebel.analytics.web.portlets.jsr168.ReportUI.getSAWConnection(ReportUI.java:911)
at com.siebel.analytics.web.portlets.jsr168.ReportUI.getSAWPage(ReportUI.java:1016)
at com.siebel.analytics.web.portlets.jsr168.ReportUI.doViewIFrameWithActionLinks(ReportUI.java:428)
at com.siebel.analytics.web.portlets.jsr168.ReportUI.doView(ReportUI.java:178)
at javax.portlet.GenericPortlet.doDispatch(Unknown Source)
at com.siebel.analytics.web.portlets.jsr168.ReportUI.doDispatch(ReportUI.java:1058)
at javax.portlet.GenericPortlet.render(Unknown Source)
at oracle.webdb.wsrp.server.Server.getMarkup(Unknown Source)
at oracle.webdb.wsrp.WSRP_v1_Markup_PortType_Tie.invoke_getMarkup(WSRP_v1_Markup_PortType_Tie.java:224)
at oracle.webdb.wsrp.WSRP_v1_Markup_PortType_Tie.processingHook(WSRP_v1_Markup_PortType_Tie.java:499)
at com.sun.xml.rpc.server.StreamingHandler.handle(StreamingHandler.java:230)
at com.sun.xml.rpc.server.http.ea.JAXRPCServletDelegate.doPost(JAXRPCServletDelegate.java:153)
at com.sun.xml.rpc.server.http.JAXRPCServlet.doPost(JAXRPCServlet.java:69)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ResourceFilterChain.doFilter(Res
ourceFilterChain.java:65)
at oracle.webdb.wsrp.server.ContextFilter.doFilter(Unknown Source)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.invoke(
ServletRequestDispatcher.java:663)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.forward
Internal(ServletRequestDispatcher.java:330)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.processReques
t(HttpRequestHandler.java:830)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.AJPRequestHandler.run(AJPRequest
Handler.java:224)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.AJPRequestHandler.run(AJPRequest
Handler.java:133)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].util.ReleasableResourcePooledExecutor$MyWork
er.run(ReleasableResourcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:534)
at org.apache.axis.configuration.FileProvider.getService(FileProvider.java:233)
at org.apache.axis.AxisEngine.getService(AxisEngine.java:311)
at org.apache.axis.MessageContext.setTargetService(MessageContext.java:755)
at org.apache.axis.client.Call.invoke(Call.java:2671)
at org.apache.axis.client.Call.invoke(Call.java:2424)
at org.apache.axis.client.Call.invoke(Call.java:2347)
at org.apache.axis.client.Call.invoke(Call.java:1804)
at com.siebel.analytics.web.soap.SAWSessionServiceStub.impersonateex(SAWSessionServiceStub.java:540)
at com.siebel.analytics.web.portlets.jsr168.SAWConnection.init(SAWConnection.java:80)
at com.siebel.analytics.web.portlets.jsr168.ReportUI.getSAWConnection(ReportUI.java:911)
at com.siebel.analytics.web.portlets.jsr168.ReportUI.getSAWPage(ReportUI.java:1016)
at com.siebel.analytics.web.portlets.jsr168.ReportUI.doViewIFrameWithActionLinks(ReportUI.java:428)
at com.siebel.analytics.web.portlets.jsr168.ReportUI.doView(ReportUI.java:178)
Then i goolge,and find the likely error at https://kr.forums.oracle.com/forums/thread.jspa?threadID=875397
But after i change the portlet.xml and web.xml and restart the oc4j_portal,still face the same error
I don't know how to resolve the problem
Anyone can help me ?
I have wait about 15 days,but still can not find any useful solution!
'

the web.xml under oc4j_portal/portal below:
$ more web.xml
<?xml version="1.0"?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.2//EN" "http://java.sun.com/j2ee/dtds/web-app_2_2/dtd">
<web-app>
<distributable/>
<listener>
<listener-class>oracle.webdb.portal.servlet.PortalServletContextListener</listener-class>
</listener>
<servlet>
<servlet-name>RepositoryServlet</servlet-name>
<servlet-class>oracle.webdb.repository.servlet.RepositoryServlet</servlet-class>
<init-param>
<param-name>logmode</param-name>
<param-value>error</param-value>
</init-param>
</servlet>
<servlet>
<servlet-name>PortalServlet</servlet-name>
<servlet-class>oracle.webdb.portal.servlet.PortalServlet</servlet-class>
<init-param>
<param-name>logmode</param-name>
<param-value>error</param-value>
</init-param>
</servlet>
<servlet>
<servlet-name>page</servlet-name>
<servlet-class>oracle.webdb.page.ParallelServlet</servlet-class>

<init-param>
<param-name>jspRoot</param-name>
<param-value>internal_jsp</param-value>
</init-param>
<init-param>
<param-name>jspSrcAlias</param-name>
<param-value>/internal_jsp/</param-value>
</init-param>
<init-param>
<param-name>useWebCache</param-name>
<param-value>true</param-value>
</init-param>
<init-param>
<param-name>maxParallelPortlets</param-name>
<param-value>20</param-value>
</init-param>
<init-param>
<param-name>maxParallelPagePortlets</param-name>
<param-value>10</param-value>
</init-param>
*<init-param>*
*<param-name>resourceUrlKey</param-name>*
*<param-value>0123456789</param-value>*
*</init-param>* </servlet>
<servlet>
<servlet-name>apploader</servlet-name>
<servlet-class>oracle.webdb.apploader.AppLoaderServlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>PortalServlet</servlet-name>
<url-pattern>/pls/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>PortalServlet</servlet-name>
<url-pattern>/page*</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>PortalServlet</servlet-name>
<url-pattern>/event*</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>PortalServlet</servlet-name>
<url-pattern>/witness/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>apploader</servlet-name>
<url-pattern>/apploader</url-pattern>
</servlet-mapping>
<context-param>
<param-name>oracle.webdb.service.ConfigLoader</param-name>
<param-value>/WEB-INF/wwjps.xml</param-value>
<description>This parameter specifies the location of the JPS configuration file</description>
</context-param>
<context-param>
<param-name>oracle.webdb.portal.PortalServletContextListener.logmode</param-name>
<param-value>error</param-value>
<description>This parameter specifies the logging mode for the context listener</description>
</context-param>
</web-app>
$

Crystal Report Viewer Not Releasing Oracle Database Connections

I have a very simple vb.net 3.5 web application that uses the Crystal Report viewer 2008 to open a report. My requirements are as follows:
1. Reports are built by another company and provided to us and used in a web environment
2. All reports contain parameter fields
3. The web application must be generic enough that a report can be added to a list and the user simply selects the report and provides database login information. The Crystal report viewer with handle the request for parameter values and prompt the user for their values.
4. All reports connect to an Oracle 10g server.
The above requirements have been meet and we have an extremely simple web application that runs the reports. It is working very well other than the crystal report viewer is not releasing the database connections. This is bad because the credentials are on a per user basis and that same user must login to a different oracle application simultaneously. They are being denied access because the credentials are already in use. We do not have control nor influence over the policies in use on the Oracle server. Ideally we would like to control the Crystal Report viewer so that it closes connections after use.
The web application code is:
Private Sub viewReports_Init(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Init
If Not IsPostBack Then
ConfigureCrystalReport()
End If
End Sub
Private Sub ConfigureCrystalReport()
'Load the Crystal Report viewer with a report.
Try
Dim reportPath As String = Server.MapPath(Session("reportname"))
crViewer.ReportSource = reportPath
Catch ex As Exception
Response.Write(Server.MapPath(Session("reportname")) & "
" & ex.Message.ToString & "
" & ex.StackTrace.ToString)
End Try
End Sub
Can anyone shed some light on this topic? Thank you

Hello, Timothy;
By default, having the report in session will hold it open for 20 minutes.
If you create the report as a ReportDocument object you can take it out of session and release it more efficiently. That will release the connection.
    Private Sub ConfigureCrystalReports()
        If (Session("hierarchicalGroupingReport") Is Nothing) Then
            hierarchicalGroupingReport = New ReportDocument()
            hierarchicalGroupingReport.Load(Server.MapPath("Hierarchical Grouping.rpt"))
            Session("hierarchicalGroupingReport") = hierarchicalGroupingReport
        Else
            hierarchicalGroupingReport = CType(Session("hierarchicalGroupingReport"), ReportDocument)
        End If
        myCrystalReportViewer.ReportSource = hierarchicalGroupingReport
    End Sub
In the Form Unload of the Viewer:
            'Take the report out of session
            Session("hierarchicalGroupingReport") = Nothing
            Session.Contents.Remove("hierarchicalGroupingReport")
            'Clean up the ReportDocument object
            hierarchicalGroupingReport.Close
            hierarchicalGroupingReport.Dispose()
            hierarchicalGroupingReport = Nothing
            GC.Collect()
Elaine

Discoverer Report View - Change color?

Any idea how to change the blah color of the Cross-Tab report viewer to some other color or at least a lighter color?

OK, call me stupid but I can't find this setting ANYWHERE!
I hate to sound like a clueless idiot but can someone please supply a screenshot of this option?
I am currently looking at the General Tab in iTunes Preferences (in iTunes 9.0.2) and this is what I see:
http://img88.imageshack.us/img88/4079/itunes902.jpg
Thanks,
Aryeh

Crystal Report Viewer changes font

Hello,
I am having an issue with Crystal Report Viewer NOT displaying the correct fonts. Below are the steps to recreate the issue
1) Created a Blank Crystal Report using Crystal Report 2008.
2) Added a few fields in them and selected the following font for all the fields :Courier 10 cpi
3) Saved the report with data.
4) Viewed the report using Crystal Report Viewer 2008.
5) The fields displayed in this Report Viewer is NOT Courier 10 cpi.
Please tell if there is a fix for this problem. Please Note that using a different font is NOT an option since I will be printing the report to a Dot Matrix printer. Using a different font will slow down the printing speed.
Thanks
Krishnan

Hi Carl,
There is a font named Courier 10,12,15(VGA res) installed on the machine.
Also the Courier 10 cpi is selected on all fields on the report. But when I view the report from CR viewer, it changes to a different font.
Also the report does not print properly to the dot matrix printer. The speed of the report is very slow and the page alignment is off. The first 2 lines of the 2nd page are printed at the end of the first page. The first 4 lines of the 3rd page prints at the end of the 3rd page and it keeps getting worse by each page.
Krishnan

How to change default Export Format Type in Crystal Report Viewer

We are coding in VB.NET 2005 using the CR2008 SP1 .NET objects.
The Crystal Report Viewer, when displayed, defaults the export type as .rpt (Crystal Reports).
We distribute our .NET application to our customers. 99% of the time, this .rpt format is useless to our customers as they do not have crystal reports developer. They usually export to a .pdf or .xls format. Is there a way to default this export option to something other than .rpt?
Thank you.

Yes, that's as much as I figured.
With the Crystal for .NET methods, the CrystalDecisions.CrystalReports.Engine's reportdocument object has an ExportToDisk method. We wanted to use this (as we used something similar with the RDC) to prompt the user to export. However, the reportdocument's exporttodisk method does not have an argument that allows for Prompting the user (true/false) like the RDC's export did. You have to actually know ahead of time the type of export the user wants as well as the filename. Well, we do not, and therefore, want the user to be able to select the type of export they want as well as enter their own filename. We want the Crystal methods to prompt for this. Since we are unable to, we've had to resort to declaring a reportviewer object and setting the viewer's reportsource = to the reportdocument. We then use the ExportReport() method which defaults to .rpt (which none of our end users have Crystal Developer). This is why we want to know if there is a way to reset the default export method to something more common (such as .pdf or .xls). Is there a way to change the reportdocument's file type in order to default the export type? Just trying to come up with some sort of workaround...
Thanks

How to change report query dynamically in Oracle APEX?

Hi,
I want to dynamically change the where condition in APEX report query. Can anyone help me solve my this problem?
(Just want to change the query which we change in Oracle Reports using lexical parameter to change &Where, &Order by etc. dynamically!!)
Thanks, Praful

Hi
I've been using flexible queries in APEX for a few years now, and your question just added a whole new dimension to the flexible and powerful nature or writing reports in APEX.
While APEX Interactive reporting has almost completely removed the need the equivalent of Lexicals in Oracle Reports, I thought it might be fun to try and use lexicals in an APEX report.
Before we start I should summarise the powerful capability of APEX reporting to have oprtional parameters (lots and lots of them if this is needed).
For each parameter, you simply add a page item which will hold the value of the parameter.
The item/parameter can be populated by typing in the value, defining an LOV, using a date-picker etc.
To make the parameter optional simply use an OR in the where clause.
So for a apge item P200_PARAM1.....include
WHERE (:P200_PARAM1 IS NULL
OR COLUMN1 = :P200_PARAM1)
This way you can either leave the page item null or type in / select a value from a LOV.
There is a small quirk in APEX LOV's which sometimes returns a value of '%' or '%null%' - depending on the version - when no value is selected.
See Patrick Wolf's solution for this at Re: Null value handling in LOVs
I include this Application Process in all my APEX applications ;)
Now let's look at using the equivalent of Oracle Reports Lexicals......
First-off - this is based on the APEX SQL report - NOT Interactive Report.
It relies on the fact that you can let the query be parsed only at runtime.
1. Define an SQL report entering the 'core' of your query.
With a query like SELECT ENAME, JOB FROM EMP
Select 'Generic Columns' option in the 'Column Headings' section
Finish the report creation
2. Define a page item - say P200_LEXICAL - type text on the page
3. Edit the report and update the SQL query to include your lexical page item
SELECT ENAME, JOB FROM EMP &P200_LEXICAL. (REMEMBER THE '.' AT THE END)
Ensure that the option "Use Generic Column Names (parse query at runtime only)" is selected at the bottom of the query
4. Add a button to the page -using 'Create a button displayed among this region's items' the will submit the page.
5. Run the page - you will see all the employee names and job desdriptions
6. Enter a where clause into the 'Lexical' textbox - say "WHERE ENAME LIKE 'K%'" and click the 'Go' button
Voila! your where clause is magically applied.
Try any variant you like adding an ORDER BY clause etc...... this is FUN!
7. Clear the value of the LEXICAL and click go.
Edit the report and move the &P200_LEXICAL. into the selected columns (or add another one)
SELECT ENAME, JOB &P200_LEXICAL. FROM EMP
8. Run the page
Enter ",SAL" in the textbox and "Go"
We can add as many columns as we like (subject to the "Maximum number of generic report columns:" set below the SQL query in the report edit section)
Now because we have all the flexibility in APEX of setting page items using SQL or PLSQL you can set the value of the lexical programatically, or just pre-set a few values in an LOV - the options are limitless.
While I've never had the need to use lexicals - you can see that APEX provides the most Flexible Lexicals in town.
Eat your heart out "Oracle Reports"!!!
Have fun
Mike

Oracle CLOB fails to display in the Java report viewer (CR4E 2.0)

We are using Crystal XI report designer and CR4E 2.0 report engine accessing a Oracle 10g MAXIMO database.
There is one field (longdescription.ldtext) that is an Oracle CLOB, which Crystal sees as a Memo data-type field, that displays just fine in Crystal Reports Developer 11.0.0.1282 Print Preview, but when the exact same .rpt file is loaded to the web environment and brought up under the report DHTML viewer for the exact same database record, the field does not display.
I encountered this same issue earlier but worked around it by casting the CLOB to a varchar2(2000), but in this case the data is often larger than a varchar2's max size, so I need to print the entire CLOB.
Any ideas, anyone?
Thanks,
Bill

Bill,
I faced the similar issue some time back. See if this works for you
In my case the clob size field was limited to 15000 characters for users to enter through the application.
So if u know the maximum limit of data users can enter into the clob field. You can do something like
1. Create a view
create view test_clob as
select
     to_char( substr (<clob_column>, 1, 2000) ) clob1,
     to_char( substr (<clob_column>, 2001, 2000) ) clob2,
     to_char( substr (<clob_column>, 4001, 2000) ) clob3,
     to_char( substr (<clob_column>, 14001, 1000) ) clob8
from
     <table_with_clob_field>
2. Use the view created above instead of the table in the report
3. Create a formula in the report to join all the individual values from the view
stringVar msc1 := '';
stringVar msc2 := '';
stringVar msc3 := '';
stringVar msc4 := '';
stringVar msc5 := '';
stringVar msc6 := '';
stringVar msc7 := '';
stringVar msc8 := '';
stringVar msc := '';
if not isnull({test_clob.clob1}) then msc1 := {test_clob.clob1};
if not isnull({test_clob.clob2}) then msc2 := {test_clob.clob2};
if not isnull({test_clob.clob3}) then msc3 := {test_clob.clob3};
if not isnull({test_clob.clob4}) then msc4 := {test_clob.clob4};
if not isnull({test_clob.clob5}) then msc5 := {test_clob.clob5};
if not isnull({test_clob.clob6}) then msc6 := {test_clob.clob6};
if not isnull({test_clob.clob7}) then msc7 := {test_clob.clob7};
if not isnull({test_clob.clob8}) then msc8 := {test_clob.clob8};
msc := msc1 + msc2 + msc3 + msc4 + msc5 + msc6 + msc7 + msc8;
thanks,
Kamal

How to view changes to expense reports

I am trying to find a way of viewing changes to an Expense Report.
In PR05 there is a history but it does not provide details about the change. I have also looked at PRTE and cluster AEND but again this does not provide the details that our business users require.
Does anyone know if there is any other way of viewing the detail of changes to an Expense Report?
On a related issue we have found that in PR05 the approver name is showing as the workflow user rather than the user ID of the person who approved the trip in the Portal. Can this be changed to the actual approver ?
Thanks for any help with this
Stephanie

Hi,
I think T-code PRTE provides only screen level changes (i.e who , when creates, save or updates by whome)
For detail level changes in expense reports you need to activate Define History and Archiving of Forms
V_T702N_R26_R27
Please note that this is ONLY available with EHP5 BC 605 FIN_TRAVEL_3
Following is help available
_________________________________________________________________________Use
In this step, you can activate the following functions:
History
If you activate logging of history, the system logs the changes to travel requests and expense reports. Users can display the history in the following user interfaces:
Personal object worklists (POWL) for travelers, assistents, and approving managers on the Web Dynpro ABAP-based user interface of Travel Management
Transactions of the travel expense report in SAP GUI; for example, in the Travel Expense Manager (transaction PR05) or in the Travel Calendar (transaction PR02)
If you do not activate logging of history, the system automatically logs the changes made to expense reports (as in earlier releases). Users can display the change history only in the transactions of the travel expense report in SAP GUI.
Storage of Travel and Expense Forms in the Archive
If you have activated logging of history, you also can define that the travel request forms and expense report forms are to be automatically archived when certain events occur. You can determine which of the following events triggers the archiving of a form:
When processing of a changed travel request or expense report is handed over from the user who makes the change to another user
When the status of the travel request or expense report changes
When a user saves the travel request or expense report
You can archive the Adobe PDF forms or HTML forms for travel requests and expense reports, but not the forms for travel plans. If you use an ABAP list form, the system first converts this form to an HTML form and then archives the HTML form.
In the following activities you define which kinds of forms the system uses:
For travel requests, see Define Enterprise-Wide Control Parameters and attribute HTMLFORM_R_P.
For expense reports, see Travel Expenses Control (Expert View), Other Settlement, field 24.
Requirements
The following prerequisites must be met:
You have activated the updating of statistical data when trips are saved; see Define Structure of Trip Statistics.
You have made the basic settings for ArchiveLink; see Basic Customizing for ArchiveLink.
Note:
If you want to archive Adobe PDF forms, the document type PDF under Edit Document Classes must contain an entry with MIME type application/pdf.
If you want to archive HTML forms, the document type HTML under Edit Document Classes must contain an entry with MIME type text/html.
Standard settings
By default, history logging is not activated.
or http://help.sap.com/erp2005_ehp_05/helpdata/en/1e/9467498ee0444f9d06070d3e267364/frameset.htm

Page is refreshing when changing parameter in sharepoint 2010 report viewer

Hi All,
I have uploaded a rdl file to sharepoint 2010 docuement library. When I click on this rdl file, it opens the report in a reportviewer.
I have 4 parameters year, month, country, location(its is dependent on country selection).
Now the issue is if I change year, month, and country it is refreshing entire page and displaying the following error message, but if I change location then no refresh is happening.
"Report parameter values must be specified before the report can be displayed. Choose parameter values in the parameters area and click the Apply button""
Any idea why it is refreshing the entire page when changing parameter value.
Thanks !
Soumya Das

Hi Soumya,
According to your description, my understanding is that you got an error when you used Report View.
Whether you used cascading parameter in the report. It seems to be by design if you used cascading parameter in the report.
As I am not an expert for reporting, I suggest you create a new thread on SSRS forum, more experts will assist you with this issue.
SSRS forum:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices
Or, you can open a ticket for this issue to confirm this issue.
Here are two similar threads, you can use as a reference:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/0979b6c1-b110-4ab9-9685-8382c8efbe3b/report-parameter-values-must-be-specified-before-the-report-can-be-displayed-choose-parameter?forum=sqlreportingserviceshttps://social.msdn.microsoft.com/Forums/sqlserver/en-US/0979b6c1-b110-4ab9-9685-8382c8efbe3b/report-parameter-values-must-be-specified-before-the-report-can-be-displayed-choose-parameter?forum=sqlreportingservices
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/c161fab2-e573-41e5-bba6-dde4122a798f/report-refreshes-when-it-shouldnt?forum=sqlreportingservices
Best Regards
Lisa Chen

AutoConfig rolling back the changes for Oracle Report Services

Hi Gurus,
I am putting some properties in $INST_TOP/ora/10.1.2/reports/conf/rwbuilder.conf in R12.0.6 EBS instance to fix a report related issue. Whenever I ran the auto config, my changes are going away. Can you please help how can I preserve my changes please.
Thanks
Asif

user12142193 wrote:
Hi Gurus,
I am putting some properties in $INST_TOP/ora/10.1.2/reports/conf/rwbuilder.conf in R12.0.6 EBS instance to fix a report related issue. Whenever I ran the auto config, my changes are going away. Can you please help how can I preserve my changes please.
Thanks
AsifPlease apply the patches mentioned in these docs.
Intermittent Oracle Reports REP-0069: REP-57054: Error [ID 1237834.1]
Patch 11669923 Post Patch Instructions Would Get Overridden By Autoconfig [ID 1322704.1]
Reports Cache Directory in Oracle E-Business R12 is Growing Rapidly [ID 859255.1]
EBS R12 Oracle Reports Cache Directory Not Being Cleaned Up [ID 1062825.1]
Thanks,
Hussein

Crystal Report Viewer Page Change Refresh Issue

Hello
I hope this is an easy question for someone out there.
I am using a crystal report viewer with the code contained in the page init event. The report has several pages and opens in a separate tab. There is also a on demand drilldown sub-report in the report.
When I want to move to the second page the viewer seems to process the code again (like its runs the page init event) which takes several seconds so will not be satisfactory for the users. I tried the concatenate the pages using the 'SeparatePages' property but then the user can't select a specific page.
Is there any way that the report can just open in the viewer and not have to reload everytime the user changes page?
Thanks in advance
Dave.

Hi Dave
In a web app, you could place the reports in session. See KBA: 1985571 - How to use sessions in web applications using the Crystal Reports viewer (the complete code)
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Error Running Reports as Portlet in Oracle AS 10g

#First, I create the report server using Reports Server Access Portlet (Administration> Oracle Reports Security Setting)
When defining the Server Name and Printers, I fill the fields like this:
Display Name : MY_REPORTS_SERVER
Reports Server Name : myserver
Oracle Reports Web Gateway URL for JSP reports : http://stts:7778/
Oracle Reports Web Gateway URL for RDF reports : http://stts:7778/reports/rwservlet
#Second, I create the report definition using Reports Definition File Access portlet
Display Name : myreport
Reports Servers : MY_REPORTS_SERVER
Oracle Reports File Name : test.rdf (default report sample)
Execute : via servlet
#The problem is.....
When I tried to run the report by clicking Run / Run as Portlet link, the report doesn't show up.
Then, I rightclick-View Page Source on the page
<iframe name="iFramePortlet"
src="http://sttsstts/reports/rwservlet?report=test.rdf&server=myserver&destype=Cach....
I found that the src tag is doubling my computername into sttsstts, it supposed to be stts only.
How come this happen???
I already tried to change server definition into
Oracle Reports Web Gateway URL for JSP reports : http://localhost/
Oracle Reports Web Gateway URL for RDF reports : http://localhost/reports/rwservlet
but the when tried to run the report again, the src still added by computername become:
src="http://localhoststts/reports/rwservlet?report=test.rdf&server=myserver&destype=Cach............
plaease help me...
Thanx before,
Chris

Hi,
I found two Metalink Notes that could of use to you :-
Metalink Note:230544.1 :- How To Install And Configure OSA AS Portlets (Main Document)
Metalink Note:247595.1 :- Installing AS Portlets 1.0 with OFA or OSA Version 6.4
Regards,
Sandeep

Crystal report viewer does not observe the PaperSize and PageOrientation setting

Hi:
My application is a 3 tier application, where the WinForm client is connected to the WCF Services hosted in IIS server.
The report is generated on server side using WCF service, and export as.rpt with data, the .rpt file is then sent to the WinForm client, the Crystal Report viewer is used to load the .rpt file for preview and print.
On server side I've Microsoft XPS Document Writer installed and set as default printer. On the client side if the default printer is XPS or Nitro PDF creator, the report can be view and print correctly, report design in landscape will be able to show in the landscape in CR viewer, report design using custom paper size (e.g. Half Letter), CR viewer able to show it in Half Letter.
The problem that I'm facing is when the default printer is set to HP LaserJet P1120 or others (I've tried Epson ESC/P Standard driver), the report is always shown in the portrait, and it will not be able to show in custom paper size either. Here is my code:
     Dim settings As New System.Drawing.Printing.PrinterSettings
     Dim rep as New ReportDocument
     rep.Load(sOutputFileName)     'The report is download from server and save in sOutputFileName
     SetReportPaperSize(rep, sPaperSizeName, False, settings) ' sPaperSizeName store the name of the custom paper used in the report
     CrViewer.ReportSource = rep
   Public Shared Sub SetReportPaperSize(rep As ReportDocument, paperSizeName As String, isHardCopy As Boolean, settings As Printing.PrinterSettings)
      Dim installedPrinters As Printing.PrinterSettings.StringCollection = Printing.PrinterSettings.InstalledPrinters
      Dim printers As New List(Of String)
      Dim sPrinter As String
      If installedPrinters.Count = 0 Then
         Return
      End If
      SetPrinterDefaultPaperSize(rep.PrintOptions, paperSizeName, settings)
      With rep.PrintOptions
         .PrinterName = settings.PrinterName
         .PaperSource = PaperSource.Auto
         If paperSizeName.Trim.Length > 0 Then
            .PaperSize = DirectCast(GetPapersizeId(paperSizeName, settings, rep.PrintOptions.PaperSize), CrystalDecisions.Shared.PaperSize)
         End If
      End With
   End Sub
   Public Shared Sub SetPrinterDefaultPaperSize(printOptions As PrintOptions, paperSizeName As String, settings As Printing.PrinterSettings)
      With settings.DefaultPageSettings
         If paperSizeName.Trim.Length = 0 Then
            . PaperSize = GetPaperSize (printOptions.PaperSize, settings)
         Else
            For Each size As Printing.PaperSize In settings.PaperSizes
               If size.PaperName.EqualsTo(paperSizeName) Then
                  .PaperSize = size
                  Exit For
               End If
            Next
         End If
         .Landscape = printOptions.PaperOrientation = PaperOrientation.Landscape
         .Margins.Top = printOptions.PageMargins.topMargin
         .Margins.Left = printOptions.PageMargins.leftMargin
         .Margins.Bottom = printOptions.PageMargins.bottomMargin
         .Margins.Right = printOptions.PageMargins.rightMargin
      End With
   End Sub
   Public Shared Function GetPaperSize(paperSizeId As Integer, defaultPrinterSettings As Printing.PrinterSettings) As Printing.PaperSize
      Dim settings As Printing.PrinterSettings = defaultPrinterSettings
      Dim result As Printing.PaperSize
      If settings Is Nothing Then
         settings = New Printing.PrinterSettings
      End If
      ' Default paper Size defined in the printer
      result = settings.DefaultPageSettings.PaperSize
      For Each size As Printing.PaperSize In settings.PaperSizes
         If size.RawKind = paperSizeId Then
            result = size
            Exit For
         End If
      Next
      Return result
   End Function
   Public Shared Function GetPapersizeId(paperSizeName As String, defaultPrinterSettings As Printing.PrinterSettings Optional defaultpaperSizeId As CrystalDecisions.Shared.PaperSize = CrystalDecisions.Shared.PaperSize.DefaultPaperSize) As Integer
      Dim settings As Printing.PrinterSettings = defaultPrinterSettings
      Dim result As Integer = defaultpaperSizeId
      If settings Is Nothing Then
         settings = New Printing.PrinterSettings
      End If
      If Not String.IsNullOrEmpty(paperSizeName) Then
         For Each size As Printing.PaperSize In settings.PaperSizes
            ' Height and Width in Printing.PaperSize is measure in hundredths of an inch
            If size.PaperName.EqualsTo(paperSizeName) Then
               result = size.RawKind
               Exit For
            End If
         Next
      End If
      Return result
   End Function
Setting the PrintOptions.PaperSize and PageOrientation seem like no effect on the viewer. My code to load the report to CR viewer is much more complicated than the code I show above, I've a background worker thread to download the report, and when the worker thread finished download the report from the server, it will assign the report to CRViewer. Do the changes in report PrintOption before assign to CRViewe and after assigning to CRViewer make any different?
I'm using VS2010, CR XI R2 (Version 11.5.3700.0). Please Help. Thanks
Regards
JC Voon

Hi JC,
CRXI R2 is a no go with VS 2010, these two are not compatible.
With CR 11.5 use VS 2005.
Or Use VS 2010 and CR for VS 2010 (13.0)
Once you have the supported / compatible conbination of CR and VS, use the In Proc RAS .NET code from below KBA.
http://search.sap.com/notes?id=0001561333&boj=/sap/bc/bsp/spn/scn_bosap/notes.do?access=69765F6D6F64653D3939382669765F7361706E6F7465735F6E756D6265723D30303031353631333333
Also, see the KBAs returned by below search. The top right corner search box on this page is quite helpful.
http://search.sap.com/ui/scn#query=crystal%252C+paper%252C+orientation%252C+.net%252C+sdk&startindex=1&filter=scm_a_site(scm_v_Site11)&filter=scm_a_modDate(*)&timeScope=all
- Bhushan
Senior Engineer
SAP Active Global Support
Follow us on Twitter
Got Enhancement ideas? Try the SAP Idea Place
Getting started and moving ahead with Crystal Reports .NET applications.

Report Viewer 9 Compresses Reports In Newer Browsers

Deep in the HTML generated by the report viewer when viewing a report on a web page, are a couple of frames then a table that holds the report. In the table are two cells. The first is called oReportCell and the second doesn't have any name.
The report is displayed inside oReportCell. However, the second cell has a width=100% attribute assigned to it. I believe in earlier browsers the report was allowed to stretch out as wide as it needed in oReportCell then the second cell took up
the rest of the room. In modern browsers it appears that the second cell is taking up as much room as it can by compressing the report. I've been able to use built in browser tools to set the width of the second cell to 0 and when I do that
the report resized perfectly. The width=100% attribute of the second cell is messing up the reports. Check it out in Chrome or any other browser and you'll see the report is compressed. Change the attribute of the second cell using developer
tools and the report will resize correctly. I've tried using CSS and jQuery in the web form that hosts the control but because of the frames I can't gain access. Is there any fix for this? My company has dozens of reports and at this moment
we're looking at having to completely rewrite all of them using Crystal just because of this one cell's attribute. Any help would be immensely appreciate and save my company thousands and thousands of dollars!

I finally fixed the problem with the following code:
<script src="https://ajax.aspnetcdn.com/ajax/jQuery/jquery-1.7.min.js" type="text/javascript"></script>
<script type="text/javascript">
$(document).ready(function () {
var iFrame = $("#ReportFrameReportViewer");
iFrame.load(function () {
var rptFrame = iFrame.contents().find('#report');
var $td;
if (rptFrame.contentWindow) {
$td = $(rptFrame[0].contentWindow.document).find("#oReportCell");
} else {
$td = $(rptFrame[0].contentDocument).find("#oReportCell");
$td.next().attr("width", "0");
$td.next().css("width", "0");
var rptFrame2 = iFrame.contents().find('#report');
if (rptFrame2.length > 0) {
var $td2;
if (rptFrame2.contentWindow) {
$td2 = $(rptFrame2[0].contentWindow.document).find("#oReportCell");
} else {
$td2 = $(rptFrame2[0].contentDocument).find("#oReportCell");
$td2.next().attr("width", "0");
$td2.next().css("width", "0");
</script>
This works and fixes the problem in most modern browsers however there is still an issue with Chrome because the dynamic tables in the report do not resize after the main container resizes. Time constraints preclude me from additional research at this time.
Darrell Sparti

Width of Report view changes in Oracle Workspace

Similar Messages

Maybe you are looking for