Width of the blank in Fill in the blank questions

Hi,
I would want to have a fixed width for setting up the blanks...Say something like 3 and while taking the test only a size of 3 can be typed in.....

Hello,
You cannot change the width, nor define a "mask" for the fields. Please fill in a feature request if you want to see this in future versions.
Lilybiri

Similar Messages

I purchased my iMac used. When I try to update my apps the computer automatically fills in the previous owner's Apple ID and I can't change it. Any ideas?

I purchased my iMac used. When I try to update apps in AppStore, the computer automatically fills in the previous owner's email address and it won't let me delete it to enter mine. I have been using my own apple ID and password on this computer for other things without a problem. Any ideas?

Before buying a second-hand computer, you should have run Apple Diagnostics or the Apple Hardware Test, whichever is applicable.
The first thing to do after buying the computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
1. If you don't own another Mac
a. If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
b. If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
c. If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
d. Some 2010-2011 models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you can't reinstall 10.6 even from the original media, and Internet Recovery will not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
2. If you do own another Mac
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
3. Partition and install OS X
a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
c. An unusual problem may arise if all the following conditions apply:
          OS X 10.7 or later was installed by the previous owner
          The startup volume was encrypted with FileVault
          You're booted in Recovery mode (that is, not from a 10.6 installation disc)
In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
4. Other issues
a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

I am unable to create a new event on my iPhone with IOS 7.0.4. I tap the plus sign, fill in the details, tape Done and ... nothing. Repeatedly. No problem on my iMac or iPad, just with the phone. Help.

I am unable to create a new event on my iPhone with IOS 7.0.4. I tap the plus sign, fill in the details, tape Done and ... nothing. Repeatedly. No problem on my iMac or iPad, just with the phone. Help.

Assuming you're creating this event to place in your calendar, and assuming this calendar is shared with your iMac and iPad using iCloud, might the calendar be restricted on your iPhone?
Check Settings > General > Restrictions

I want to create an intelligent file to show all pictures with 3 stars or more. Trying this, I don't know the character of the stars to fill in the respective box ??

I want to create an intelligent file in my finder to show all pictures with 3 stars or more. Trying this, I don't know the character of the stars to fill in the respective box ??
Thanks for your help.

Take a look here: http://hints.macworld.com/article.php?story=20110314131100623
One of the comments suggests you can't use greater than or less than with the star rating in Finder.
You might try a Raw Query with the kMDItemStarRating.
In the criteria popup menu, select Other, then find the Raw Query entry.
You might have to play around with the syntax, but try "kMDItemStarRating >= 3"
Take a look here for query syntax: https://developer.apple.com/library/mac/ipad/#documentation/Carbon/Conceptual/Sp otlightQuery/Concepts/QueryFormat.html#//apple_ref/doc/uid/TP40001849-CJBEJBHH

All photos in portrait format are displayed blurred in the preview mode "fill" of the library. In all other modes e.g. "fit"or "1:2" the photos are sharp. How can I change this, so that the photos are still sharp when displaying them in the mode "fill"?

All photos in portrait format are displayed blurred in the preview mode "fill" of the library. In all other modes e.g. "fit"or "1:2" the photos are sharp. How can I change this, so that the photos are still sharp when displaying them in the mode "fill"? My Lightroom release is 5.7.1.
Thanking you in anticipation!

I'd like to get all these '-1 suffix' files together with their associated Develop adjustments into one folder (if they aren't already) so I can see them in Grid view in the Library module, which I use as my basic starting point for everything else at this early stage of my Lightroom 'career'.
To see what folder these are stored in, right-click on a photo and select "Go to Folder in Library".
Advice: if you are going to use Lightroom effectively, you probably want to stop using folders as your method to create a grouping of photos that are already in Lightroom; there are plenty of built-in tools, such as keywords, collections, color labels, etc.
I don't understand why the search on the entire catalog picked up apparently the same two file versions but also got the Develop adjustments when going to the relevant Folder didn't show the adjustment black squares against each image in Grid view nor were they there when the images were opened in the Develop module. Perhaps if I understood this, I'd be a bit more confident of moving forward myself.
These are most likely different versions of the same photo, in different folders. Lightroom stores the edits in its own catalog, and so it knows that one folder's photos have edits, and the other folder's photos do not have edits. Please understand that Lightroom is a database, it knows where the photos are at the time you import them (or add them to the catalog by synchronize), and then if you move things around in your operating system, Lightroom does not know anything about that and problems begin. Thus the advice to organize using Lightroom tools and methods and not operating system tools and methods.

Writing a trigger to update the QOH in a Parts table for for each item of the order whenever the order is filled. The trigger is for the OrderItem table when an item record is inserted into the OrderItem table.

Any ideas?

Hi,
If orderitem and parts are the only tables involved, and each orderitem references only 1 part, then it's pretty simple: just update parts, like this
UPDATE parts
SET qoh = qoh - :NEW.quantity
WHERE part_num = :NEW.part_num;
If you can modify filled orderitems (e.g., DELETE orderitems or change the part_num after the order is filled, or change the status from filled back to unfilled then it's more complicated; you might have UPDATE the :OLD.part_num as well as the :NEW.part_num
I hope this answers your question.
If not, post your best attempt, along with a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables involved, and also post the results you want from that data.
Since you're asking about a DML statement, such as UPDATE, the sample data will be the contents of the table(s) before the DML, and the results will be state of the changed table(s) when everything is finished.
Explain, using specific examples, how you get those results from that data.
Always say which version of Oracle you're using (e.g., 11.2.0.2.0).
See the forum FAQ: https://forums.oracle.com/message/9362002

How the data is filled in the table HRP1000 by giving OTYPE as BA

Hi All,
I have table HRP1000 in which we have OTYPE. If we have OTYPE = 'Q' and execute the data is displayed based on this OTYPE. Can anybody tell from where the data is being filled into the table.
Can anybody provide FM or relationship between the tables where the data is being filled.
Thanks

Hi Mr reddy,
We maintain the qualification code for the enterprise for object type Q in HRP1000 table this information is coming..
Transaction Code to maintain qualification Catalog is OOQA
Warm Regards,
Kapil Kaushal

What is the postcode when filling out the billing information

I tried downloading a free app in the app store and its having me type in information for billing and the postcode says not valid. What exactly is the postcode

angelelsonaz wrote:
I tried downloading a free app in the app store and its having me type in information for billing and the postcode says not valid. What exactly is the postcode
Are you attempting to set up an account in a country other than the one in which you live?

How do I code to have the buuton_click fill in my textfields into a table after clicking the button. I created a table in SQL and I need this button click to call the table and fill in the three text fields. both webpage and button code is here.

using
System;
using
System.Collections.Generic;
using
System.Linq;
using
System.Web;
using
System.Web.UI;
using
System.Web.UI.WebControls;
namespace
Region_V_project_workshop
publicpartialclassWebForm5:
System.Web.UI.Page
protectedvoidPage_Load(objectsender,
EventArgse)
protectedvoidButton1_Click(objectsender,
EventArgse)
if you need my webpage code please let me know

Below is an example of executing a parameterized INSERT statement using SqlClient.
protected void Button1_Click(objectsender, EventArgse)
var connection = new SqlConnection(connectionString);
var command = new SqlCommand("INSERT INTO dbo.YourTable (FirstName, LastName) VALUES (@FirstName, @LastName);", connection);
command.Parameters.Add("@FirstName", SqlDbType.VarChar, 50).Value = textBoxFirtName.Text;
command.Parameters.Add("@LastName", SqlDbType.VarChar, 50).Value = textBoxLastName.Text;
connection.Open();
command.ExecuteNonQuery();
connection.Close();
Dan Guzman, SQL Server MVP, http://www.dbdelta.com

Using wild card with Captivate 5 ( fill in the blank)

I am training software package that requires many fill in the blanks besides the login screeen. If I were to recording the actions using Captivate 5 record, I think, I can only use a demonstration recording as oppsed to having my students interact with the product by filling in the blank. For example, my product asks for a login. When I login to demonstrate how it should be done, the product reponds correctly. By my student is limited to watching as opposed to interacting. While login is not such a big deal, there are several other areas where the same concept applies. Ideally, I wish to use wild cards in fill in the blank so that any name or information can be used to interact with Captivate and move the slide along. Is this possible, and if so, how?

I think Lilybiri may be misinterpreting your use of the term "wildcards" to mean using them in the programming sense.
Perhaps you are referring to the characters that appear in a typical Password field to hide what the user is actually typing?
If so, the text field object in Captivate has an option to use these password characters so that the user's typing characters are hidden. The characters used are asterisks, which are what some people refer to as wildcard characters.

How can I fill in the blanks on a lease?

I found the file, now I'm trying to use the "Tool" to fill in the blanks, and it won't allow me to.

Hi Atiimkwabena,
I suppose you are trying to fill the PDF form using Adobe Reader. (Correct me if I'm wrong)
If yes, then that form might not be reader rights enabled. Adobe Reader being a read only software for PDF is only meant for reading and saving the blank copy of PDF. If you want to edit something in the PDF then the creator has to enable user rights(commonly called as Reader Extend rights) so that you can save the filled PDF. That can be done by Adobe Acrobat.
I would request you to kindly contact the author of the PDF to enable the user rights and send it again.
Hope this helps.
Regards,
~Pranav

Open pdf says "please fill out the following form" when I attempt to apply redactions, I get an error message. How do I "turn off" the form portion of the document? I assume that is the problem since I have not had this issue with any of the other files

I am attempting to redact a large pdf file. When I open the file, it has a bar across the top with the message "please fill out the following form". I can mark redactions, but when I attempt to apply them I get a message saying, "In order to proceed Digital Signatures must be removed and the document must be fully authorized. Do you want to make these changes and continue?" I click "ok". Then I get a message saying, "an internal error occurred." How do I get around this problem?

You cannot redact a signed document. This is because one of the things signatures guarantee is access to the OLDER document (i.e. there will be an unredacted copy in there).
In general you cannot remove signatures, but sometimes you can. Look under the Signatures tab (right click on left vertical bar if there isn't one) to see if it is removable.

Form Captcha Issues - Error message when not filled vs. traditional "Please fill in the following:"

Just discovered an issue regarding a form using a CAPTCHA.
When I formerly submitted other forms on sites with CAPTCHA's in the forms I created, when one did not fill out the form, a pop-up window would appear allerting the customer to "Fill in the form field" that were required, including an allert to "Enter Word Verification in box below."
I have created a new form for a new site and seem to be encountering a different issue. When the form is not filled out and the user clicks "Submit" a new page loads with a red error message saying: "ERROR: An error occurred. Image verification failed. If you believe this is incorrect, please contact your system administrator or go back and re-submit the form."
How can I correct this to simply have the same required field pop-up window appear like was happening with former developed forms?? Not sure why this form is doing this when all prior forms with CAPTHCA included were just fine. Haven't done anything different to the form that I hadn't to others in the past....Please Help!! Thanks.

Thank you for posting.
Please provide us the page URL where you have placed the form and we'll further investigate this issue. You can also contact support directly by creating a ticket or via chat.
Thanks,
Aishvarya Raj Rastogi

Archivelogs filling up the disk space - Oracle 11g

Oracle Database 11g on RHEL4
This morning the Archivelogs were filling up the disk space at a very high rate (1.3G in 5 Mins). For now it has stopped. Please assist!
dallinux161 oraedw ccedw > ls -ltr
total 1373164
-rw-r----- 1 oraedw oinstall 48893440 Mar 27 08:37 o1_mf_1_4300_4wss5yhx_.arc
-rw-r----- 1 oraedw oinstall 48605184 Mar 27 08:38 o1_mf_1_4301_4wss6my1_.arc
-rw-r----- 1 oraedw oinstall 49446400 Mar 27 08:38 o1_mf_1_4302_4wss75hn_.arc
-rw-r----- 1 oraedw oinstall 48287232 Mar 27 08:38 o1_mf_1_4303_4wss7m8k_.arc
-rw-r----- 1 oraedw oinstall 49149952 Mar 27 08:39 o1_mf_1_4304_4wss8b53_.arc
-rw-r----- 1 oraedw oinstall 49004032 Mar 27 08:39 o1_mf_1_4305_4wss8ylc_.arc
-rw-r----- 1 oraedw oinstall 49296896 Mar 27 08:39 o1_mf_1_4306_4wss9p47_.arc
-rw-r----- 1 oraedw oinstall 48710144 Mar 27 08:40 o1_mf_1_4307_4wssbb54_.arc
-rw-r----- 1 oraedw oinstall 47826944 Mar 27 08:40 o1_mf_1_4308_4wssbwq7_.arc
-rw-r----- 1 oraedw oinstall 47920128 Mar 27 08:40 o1_mf_1_4309_4wssc4l5_.arc
-rw-r----- 1 oraedw oinstall 47898112 Mar 27 08:40 o1_mf_1_4310_4wssccrl_.arc
-rw-r----- 1 oraedw oinstall 47805440 Mar 27 08:40 o1_mf_1_4311_4wssck9v_.arc
-rw-r----- 1 oraedw oinstall 47805440 Mar 27 08:40 o1_mf_1_4312_4wsscqbs_.arc
-rw-r----- 1 oraedw oinstall 48220672 Mar 27 08:41 o1_mf_1_4313_4wssd0xl_.arc
-rw-r----- 1 oraedw oinstall 48555008 Mar 27 08:41 o1_mf_1_4314_4wssd7f9_.arc
-rw-r----- 1 oraedw oinstall 48971776 Mar 27 08:41 o1_mf_1_4315_4wssdghz_.arc
-rw-r----- 1 oraedw oinstall 48506880 Mar 27 08:41 o1_mf_1_4316_4wssdo87_.arc
-rw-r----- 1 oraedw oinstall 47821824 Mar 27 08:41 o1_mf_1_4317_4wssdvg3_.arc
-rw-r----- 1 oraedw oinstall 47821824 Mar 27 08:41 o1_mf_1_4318_4wssf1wx_.arc
-rw-r----- 1 oraedw oinstall 47805440 Mar 27 08:41 o1_mf_1_4319_4wssf8g3_.arc
-rw-r----- 1 oraedw oinstall 47804416 Mar 27 08:41 o1_mf_1_4320_4wssfgf8_.arc
-rw-r----- 1 oraedw oinstall 49128960 Mar 27 08:41 o1_mf_1_4321_4wssfn29_.arc
-rw-r----- 1 oraedw oinstall 49092096 Mar 27 08:42 o1_mf_1_4322_4wssft4f_.arc
-rw-r----- 1 oraedw oinstall 49487360 Mar 27 08:42 o1_mf_1_4323_4wssg0nb_.arc
-rw-r----- 1 oraedw oinstall 48568320 Mar 27 08:42 o1_mf_1_4324_4wssg7h7_.arc
-rw-r----- 1 oraedw oinstall 47837696 Mar 27 08:42 o1_mf_1_4325_4wssgg1x_.arc
-rw-r----- 1 oraedw oinstall 48565248 Mar 27 08:42 o1_mf_1_4326_4wssgnhw_.arc
-rw-r----- 1 oraedw oinstall 47838720 Mar 27 08:42 o1_mf_1_4327_4wssgttg_.arc
-rw-r----- 1 oraedw oinstall 47844864 Mar 27 08:42 o1_mf_1_4328_4wssh107_.arc
dallinux161 oraedw ccedw > du -sh
1.3G .

Anand... wrote:
Hi..
1. Check what is going on in the database.Seems like some huge dml process are going on.
2. You can increase the redo logfile size.Currently its around 48MB, incresae it to 100MB.While he probably should increase his redo log size, that will have zero impact on the amount of disk space consumed by the archivelog files. If the OP is generating 1gb/min of redo, he will consume 1gb/min of disk space for archivelogs. It may be with 1 ea. 4gb file every 4 minutes or 1 ea. 256mb files every 15 seconds, but it still comes out the same in the end. Redo file size influences how often a log switch occurs and the size of the individual archivelog files, but it has no bearing on the amount of redo that has to be archived over a given period.
>
Anand

Firefox "remembered password" fills in the wrong field

my email account (Gmail) is "@u.northwestern.edu". The log in screen has 2 sets of fields. For current students, it is a NetID & Net Password, for alums it is an Account Name & Account Password. I asked Firefox to remember my password, but every time I open the page it fills in the NetID & Net Password (first 2 fields), not the AN & APW (second 2 fields). I have to cut and past every time!

Maybe:
*Secure Login: https://addons.mozilla.org/firefox/addon/4429
*Autofill Forms: https://addons.mozilla.org/firefox/addon/4775

Width of the blank in Fill in the blank questions

Similar Messages

Maybe you are looking for