Wierd loading issue
I've downloaded the Dreamweaver CS6 Trial for use in a university course onto my laptop. It seemed to install alright, but whenever I actually try to run it, it crashes. Comes up with the green Dreamweaver CS6 opening screen (the box in middle of screen more than a full opening screen), which then vanishes, and nothing happens beyond that. Tried to find answer to this problem, but can't, and really need it to work.
Does your laptop meet the minimum requirements?
https://www.adobe.com/products/dreamweaver/tech-specs.html
Similar Messages
-
SAP Mobile Sales 2.0 delta load issue for Sales Orders
Hello,
we have used Mobile Sales 2.0 with a Windows app for a while now. Our current issue is that sales reps won't see any historical sales order data on their devices.
Background
Due customer requirements, we need to make small changes to customer master data attributes and reload all customers from ERP to CRM. Then we ran delta loads (MAS_PARTNER followed by all other objects) to DOE, in which virtually all 5000+ customer accounts were compared. The delta load ran for about 3 days (some performance bottleneck we haven't located yet).
During the delta load, data on devices was inconsistent. Accounts were missing and all transaction data disappeared. After the delta loads, all accounts and contacts are OK, save for a few. Data from activities (appointments, tasks) have reappeared, as they should. Only sales orders won't reappear. The sales orders exist in the backend and belong to active accounts and sales reps.
Settings and troubleshooting so far
We don't have any limitations for sales orders in CRM Sales Mobile configuration.
We've run delta loads for all objects in transaction SDOE_LOAD.
MAS_CUSTOMIZATION etc seem fine.
We've re-run initial load for sales orders from CRM.
In the test system, we've even reinitialized the whole CDS database on DOE and on the devices, then re-ran the loads.
Checked steps suggested in discussion
SAP CRM 2.0 initial load issue
Historical sales orders (those created before the master data reload) exist in the backend, but don't show up on the device.
If I change one of those historical sales orders in the backend, it gets sent to the device.
If I create a new sales order in the backend or on the device, it is saved and replicated just fine.
To sum it up, it seems DOE is unable to identify the sales orders relevant for replication.First Doubt i got clarify by my self as we can go with Unwired Runtime option .
But i still have doubt in :
2. How can i Modifying the Main Menu for iOS.
i am able to customize the same for windows using files SybaseCRM.Configuration.xml file.
Same how can i do for iphone/ipad. -
Hello all,
I am using Oracle 6i for report and oracle10g for the database.I have created a matrix report in oracle Report but which report taking so much time to show the output it almost taking more than 10 minutes,at the same time that query executed within 1 minute in toad which used in matrix report.
kindly guide me how to solve the loading issue.I did not used any formula column in my report,all the values are taking from query.
But I used different types of format trigger in my report for the coloring purpose.Does it make any problem? -
Data Load Issue "Request is in obsolete version of DataSource"
Hello,
I am getting a very strange data load issue in production, I am able to load the data upto PSA, but when I am running the DTP to load the data into 0EMPLOYEE ( Master data Object) getting bellow msg
Request REQU_1IGEUD6M8EZH8V65JTENZGQHD not extracted; request is in obsolete version of DataSource
The request REQU_1IGEUD6M8EZH8V65JTENZGQHD was loaded into the PSA table when the DataSource had a different structure to the current one. Incompatible changes have been made to the DataSource since then and the request cannot be extracted with the DTP anymore.
I have taken the follwoing action
1. Replicated the data source
2. Deleted all request from PSA
2. Activated the data source using (RSDS_DATASOURCE_ACTIVATE_ALL)
3. Re transported the datasource , transformation, DTP
Still getting the same issue
If you have any idea please reply asap.
SamitHi
Generate your datasource in R/3 then replicate and activate the transfer rules.
Regards,
Chandu. -
Index.php loading issue
I finished and uploaded a new site in .php.
I have a graphics loading issue only with IE.
The js accordion with images will not reload after returning to the home page.
Anyone out thier that can shed some light on this?
http://carpetcleaningsantabarbarapro.com/index.php
Thank you in advance
CrissymarieKen might be on to something. The current release of jQuery is 1.7.2 which is compatible with jQuery Cycle.
For the latest core library, you can link to jQuery's CDN like so:
<script type="text/javascript" src="http://code.jquery.com/jquery-latest.min.js"></script>
You have some improperly nested <h3> tags around your lists on lines 170 and 191. To keep your code error free, simply delete the heading tags.
Finally, as a courtesy to your site visitors, consider adding a cookie so people don't have to watch the Flash Spokesperson every time they go to your home page. The link below shows how:
http://alt-web.com/DEMOS/cookie-test-show-hide-flash-intro.shtml
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/ -
I am having an issue where the data that drives a tilelist
works correctly when the tile list is not loaded on the first page
of the application. When it is put on a second page in a viewstack
then the tilelist displays correctly when you navigate to it. When
the tilelist is placed in the first page of the application I get
the correct number of items to display in the tilelist but the
information the item renderer is supposed to display, ie a picture,
caption and title, does not. The strange thing is that a Tree
populates correctly given the same situation. Here is the sequence
of events:
// get tree is that data for the tree and get groups is the
data for the tilelist
creationComplete="get_tree.send();get_groups.send();"
<mx:HTTPService showBusyCursor="true" id="get_groups"
url="[some xml doc]" resultFormat="e4x"/>
<mx:XMLListCollection id="myXMlist"
source="{get_groups.lastResult.groups}"/>
<mx:HTTPService showBusyCursor="true" id="get_tree"
url="[some xml doc]" resultFormat="e4x" />
<mx:XMLListCollection id="myTreeXMlist"
source="{get_tree.lastResult.groups}"/>
And then the data provider of the tilelist and tree are set
accordingly. I tried putting moving the data calls from the
creation complete to the initialize event thinking that it would
hit earlier in the process and be done by the time the final
completion came about but that didn't help either. I guess I'm just
at a loss as to why the tree works fine no matter where I put it
but the TileList does not. It's almost like the tree and the
tilelist will sit and wait for the data but the item renderer in
the tilelist will not wait. Which would explain why clicking on the
tile list still produces the correct sequence of events but the
visual component of the tilelist is just not working right. Anyone
have any ideas?Ok, so if ASO value is wrong, then its a data load issue and no point messing around with the BSO app. You are loading two transactions to the exact same intersection. Make sure your data load is set to aggregate values and not overwrite.
-
BI Load issue in the transformation/DTP after SP 17
Hello,
After SP 17 applied in our BI system, we are having load issue in one particular transformation/DTP.
See below the errors:
u2022 Messages for 101 data records saved; request is red acc. to
configuration
u2022 Thee is no active nametab in the system, although an active ABAP/4
Dictionary object was expected. Reactivate the ABAP/4 Dictionary object.
Also I have activated the DSO, transformation and DTP. Also I went to SE14 and try to adjust my DSO, SE11 and activate the table but still having the issue.
Can someone advise me on how to resolve this issue?
Thanks a lot.
CesarHi,
Do the following: In BI, run transaction SE38 >> RSDG_CUBE_ACTIVATE to recreate the Metadata information
for the Info-provider.
Then execute another program via SE38: RSDD_RSTMPLWIDTP_GEN_ALL
See Note 1161940 and 1152453 for more details.
Regards, -
I have a problem with this. The jobs in the screen snapshot below are running too long - 2LIS_11_VAITM, 2LIS_11_V_ITM, and 2LIS_13_VDITM. They use to run for just a couple of minutes. The job configuration is; when the first job finishes a delay of 10 minutes will be incurred then the second job will run, then another 10 minute delay before the third job runs. After these 3 jobs are complete an activation job needs to run. This activation job began to fail because the first 3 jobs were not finished. For now, the activation job has been moved but we need to understand why these are running longer and fix it. We may be experiencing a problem with database performance in PDF but I would not think it would take that much longer.
This is the BW sales load issue
The info-package group is schedule @ 00:05 am and it contains 3 info-packages: VAITM, V_ITM and VDITM with 10 minutes execution gap.
The first VAITM started 00:05:46 and ended it up in BW at 00:09:02.
Then we have 10 minutes delayed between jobs.
V_ITM started 00:20:12 and for some reason it finished at 01:00:51. We can see communication between PDF and BWP took much longer than normal.
Then we have 10 minutes delayed between jobs
At 01:00:25 the activation job started and failed. It requires the info-packages to be in GREEN status but V_ITM finished @ 01:00:51.
It probably failed because V_ITM still had YELLOW status at the moment.
VDITM started 01:12:02 and finally finished it load at 02:09:16. A big communication delayed between system.
See below an example of the load on the 01/14/2007. It looks normal communication between systems
Could you please give solution for this.
Thanks
Vasu.Hi,
For every job you define and at the same time, you can also define the priority
levels to each job, since, during your job execution might be your job queue is
full with some other background processings, so try setting up the priority levels
of the job.
cheers,
Pattan. -
Hello All,
I facing a very wierd DHCP issue and would like to know your thoughts on it.
I have my wired clients on vlan 1 and wireless cleints(eap-peap) on VLAN 2.
We are facing an issue where multiple wired clients who were on access port vlan 1 are receiving IP address from wireless subnet(vlan2) -their DHCP server was the WLC virtual gateway IP address(1.1.1.1). This is causing an outage to few wired clients.
The WLC trunk does not have vlan 1 allowed on its ports and all APs are in local mode and all on access vlan.
I'm not entirely sure whats causing this, but only way I think this is possible is that 'A Client' laptop has his network connections bridged - his wired nic on VLAN 1 and wireless NIC on vlan 2, acting like a WGB, which is causing new wired clients(vlan1) DHCP broadcast request forwared through the bidge mode laptop to AP--> WLC. Do you think this is possible??
Havent been able to identify which client is causing this issue yet.
Has anyone faced a similar issue and anyway to block this through WLC/ACS policy?
Thanks
JinoHi,
Might we consider to make use of network monitor to take a look at the traffics for the 1.1.1.1 address?
How to use Network Monitor to capture network traffic
Download link here:
Microsoft Network Monitor 3.4
Best regards
Michael Shao
TechNet Community Support -
Does resteasy API have class loader issues when using via OSGi
Does resteasy API have class loader issues when using via OSGi
Hi Scott,
THis isnt an answer to ur Question, but could u tell me which jar files are needed for the packages:
com.sap.portal.pcm.system.ISystems
com.sap.portal.pcm.system.ISystem
and under which path I coul dfind them.
Thnx
Regards
Meesum. -
I am new to Demantra. Have installed a stand alone Demantra system in our server. In order to load data, I created a new model, defined item and location levels, then clicked on 'Build Model'. The data is loaded into 3 custom tables created by me. After creating the model, I cannot login to 'Collaborator Workbench', it gives message 'There are system errors. Please contact your System Administrator'. Can anyone please tell me what I am doing wrong and how to resolve the issue.
ThanksOk, so if ASO value is wrong, then its a data load issue and no point messing around with the BSO app. You are loading two transactions to the exact same intersection. Make sure your data load is set to aggregate values and not overwrite.
-
Integrated WL/Jdeveloper class loading issue
Hello,
I am trying to run a deployed project , getting into this class loading issue. Any idea?
javax.security.auth.login.LoginException: java.lang.LinkageError: loader constraint violation: when resolving interface method "com.scat.util.identity.UserFactory.lookup(Ljava/lang/String;)Lcom/scat/domain/identity/User;" the class loader (instance of weblogic/utils/classloaders/ChangeAwareClassLoader) of the current class, com/scat/auth/authentication/login/UserLoginModule, and the class loader (instance of sun/misc/Launcher$AppClassLoader) for resolved class, com/scatl/util/identity/UserFactory, have different Class objects for the type com/scat/domain/identity/User used in the signature
Thanks
RamHow many times are you loading the com/scat/domain/identity/User type?
Is this in the system classloader and the application? and are you using class loading filtering in the application, for example,
in weblogic.xml - prefer-web-inf-classes? -
Hi!
I have created a little test swf for my client and I have
encountered a wierd problem because the loading percentage text
field does not seem to function in IE 6 but the same file works
fine when viewed in Firefox and Netscape. When I test the movie
using simulate download in Flash it works well too. Is this a bug
and how can be fixed?
Please take a look online:
http://www.attila.reinhardt.com/clients/accentcom/clientprofiles_cheyney.html
I have also posted the related actionscript code below.
Thank you for any help in advance,
Attila<< I Tried to post it through this link -
http://input.mozilla.com/en-US/feedback#sad
There was no visual clue that it took the feedback - just sat on the screen with my information in the text box. >>
The same thing happens with me. -
I am doing a test in BI 7.0, Datasource to PSA.
overall status and technical status turn to green, but when i go to detail, i saw a warning:
requests (messages): Request confirmed
Missing message: Request confirmed
So i goto source system, SM37 and search the job BI*, they were all finished successfullly. I back to BW side and refresh the monitor, the data loading was still pending there.
If i update PSA to data target via transfer rule / update rule, it will failed due to time out.
If i debug the transfer rule / update rule, everything is fine.
If i simulate upload data, it is fine.
I have checked RSRV, everything is fine.
Any hint / clue on this strange case?
P.S: Actually in BW monitor, I saw the below information (to PSA). It is really wierd because the overall status was set to green by system already but it is still running!
Request still running
Diagnosis
No errors found. The current process has probably not finished yet.
System Response
The ALE inbox of BI is identical to the ALE outbox of the source system
or
the maximum wait time for this request has not yet been exceeded
or
the background job has not yet finished in the source system.
Current status
Data request was not successfully sent offHi,
Follow the steps .
If the loads are running past so many days then follwo the steps.
1. Check the previous requests ( Data Target Level).So that you will get idea how much loading time is taking in BI.
If loading is Full :
Check the data in RSA3 level.If Data available in R/3 then try tro load data into PSA first.If data is not there check the data at the table levl.
If it Delta :
Check the Delta queue as well as R/3 background Jobs for the particular DS.
Thanks, -
OK...I have a strange problem...in a song, I have a shaker from an Apple loop....it is muted at some points in the song and then comies in out out throughout the song...the strange part is that it changes volumes and tonality DRASTICALLY....it comes in fine, then gets drastically louder and brighter...then at a different part of the song gets very soft and dull, then goes back to the normal level....This is basically an 8 bar loop for 4 minutes...so its all just copied data...and no automation anywhere.....Any ideas? The BTD is a 24bit/96k wave file with no dither....
maybe you've accidentally got your apple loop following chord changes.. I believe there's a setting for that in the global chord track, but I never use this part of logic because it's a bit on the gimmicky side IMO. anyway it would suit the symptoms you are describing, if throughout your song the shaker is being suddenly repitched in real time at various times in your song, that would easily explain why sometimes it is drastically loud and bright, other times soft and dark.. transposing a shaker would have exactly those characteristics.
Maybe you are looking for
-
Why do I have a grey logon screen now after downloading Yosemite ?
Hi, sorry if this sounds daft but please could anyone tell me why I no longer have my regular login/start up screen when I turn my macbook pro on ? I used to get a small flower icon with my name underneath it that I just had to enter my password into
-
I just bought a Intensity Pro video card with a HDMI connection to my Sony LCD 26" TV as a reference monitor (not the computer monitor...). In AE CS3 i select Intensity for my Video output. Now when working in AE, for example with a still photo and s
-
Every time i try to Burn a disk it cancels and says "The attempt to burn a disk has failed. An unknown error occurred (4280) help
-
DTW error message - Data too large for the field65171
Am trying to run up General Legder Accounts using DTW in Version 8.8 and have been successful with Level 2. The customer has three levels only. The total number of characters for the various segments is 18 and I have double and triple checked that
-
Why doesn't Photoshop snapping consider layer effects like shadows?
When I am cutting my graphics for being used by developers, I somethings need to provide them with the shadow or any other effects, as coding those effects will not appear as nice as the effects in Photoshop. When I use the guides or the crop tool to