Wierd situation with my gt70 2pe and 880m...

hi ppl !
i have 3 different question and problem .
first ; when i stress test my 880gpu with kombustor3 (GPU core burner v2 (Furry PQTorus) 1920x1080 8xmsaa) for about 5-6 minute , then i get throttling down after 30 seconds underload of @ 57-90c temps...

Hello,
I'd like to update the bios my card if available.
Model: GTX 970 Gaming 4G
S/N: 602-V316-09SB1411068196
Current image: https://onedrive.live.com/redir?resid=1F7FF70B76AB500D!2486&authkey=!AJ5VNpQHy0xteNk&ithint=file%2crom
Thanks,

Similar Messages

  • Re: wierd situation with my gt70 2pe and 880m...

    thanks for infos.. the real problem is throttling while gpu @ 65 70c temps. a friend of mine told me about power consumption issue but i laughed to him and say " msi wont do that planning mistake" ... but now i can understand that it does....woaww guys...

    Quote from: wifitech83 on 28-June-15, 14:51:58Have you tried making it switch it dedicated graphics per application in the GPU client settings?
    You would need to flash back to former BIOS since the latest on...

  • Wierd issue with Sound Blaster Z and Windows 8.1

    I have just started having an issue with my sound card. For the past year it has been working perfectly fine with no issues. There have been no recent changes to the computer, but within the past week, if I am in the middle of a game or listening to music, the computer will once a day lock up, I then have to restart the computer. After it restarts, the right speakers, and only the right will not work, Center, Subwoofer, and Left side speakers work 5.0. I then go the Sound Blaster Z-series control panel and re-enable the surround sound. At this point the Center and Subwoofer cease to work, but the right side works perfectly fine. After a couple of resets the center and subwoofer still do not work. I then have to go to the back of the computer and change the cable for the center / subwoofer from left most to the second left most (as looking at the back of computer from the top side). It will work fine this way with all speakers working, for roughly a day then it will lock up again. I have to go through the same process, but move the cable from the second left most to the left most output for it to work again. I tried for the past two days to troubleshoot by removing all the software and creative drivers. Same issue after reinstalling with a fresh driver set. Any help, because this is completely annoying.
    System Stats:
    ASUS P6T Deluxe Motherboard
    Intel Core i7 965 CPU
    Corsair Dominator 3x2 GB
    Intel 520 SSD 120 GB
    Samsung Evo 840 SSD 250 GB
    WD 500 GB (x2)
    XFX Radeon HD 7770 (X2)
    Sound Blaster Z
    Windows 8.1 Pro 64 Bit
    Thank You,
    Michael Mastro II

    Considering that there is already a ca0132 driver for linux, which was made to support chromebook pixel laptop. It should not be hard for creative to make that driver compatible with discrete cards and motherboards that make use of that chip. But Creative seriously dropped the ball on users and does not care about them. I do not understand this, because all previous creative cards are supported in linux. Steam OS and steam boxes are around the corner and Creative is missing a big opportunity.

  • MSI GT70 2PE - GTX 880M Not boosting

    Hi,
    I have a gtx 880m which has never boosted, the nominal clock is 954MHz and 993MHz of boost. Neither games or synthetic tests make the card reach the boost clocks. I have recently changed my vbios to the new version MSI has uploaded, also, overclocking does not work, the card reaches a maximum of 954MHz.
    Monitoring using MSI afterburner, newest drivers, temps around 75ºC under load.
    I would appreciate any advice if anyone knows what could I do.

    Did you update the latest BIOS and EC firmware of your model first?
    And suggest you use the NVIDIA graphic driver from MSI (not from NVIDIA) to test again.

  • MSI GT70 2PE LOW FPS

    My brand  new MSI GT70 2PE DOMINATOR 880M with 8GB of video memory was working just fine, after about 3 weeks of usage, roughly 2 hours a day of Call of duty it started giving me low fps after 10-15 minutes of playing.
    These are the following which I have tried to fix the problem:
    Changed advanced power settings for maximum performance.
    Changed 3D settings for each game individual to have maximum performance in power settings
    Changed 3D settings globally to have maximum performance in power settings.
    Obviously I have chosen NVIDIA GPU to be used.
    When none of these worked, I tampered the void sticker and changed thermal paste, some of the paste was off the GPU and CPU but mostly it was there, so changed it, for both, screwed it back together, and NOTHING HAS CHANGED,
    Temperatures before changing the paste and after did not change as well, while playing are around 60 celcious for GPU and CPU, 140 Fahrenheit.
    So after 5 minutes of playing with new paste FPS drops again to 10 FPS per sec in COD, and this is the case for every game that I have, total war series, cod series, poe, skyrim, every game.
    So does that mean that my GPU is faulty ?
    One thing I've remembered; while I had this issue already, I switched off power plug and played on battery i Played total war 2 on strategic map mostly so fps wasn't noticeable there, after power for to about 28% I switched power back in and started playing COD, for 2 hours while it was charging and I was playing FPS was perfect. Next day problem was there again, I tried to do the same, switched it off till it got to 30% switched power back to play in hope that FPS will be normal, but it was never like this agian, same 5FPS problem.
    And also during 3 weeks of playing I noticed that my power button was mostly of white color, it was changing sometimes to red but mostly white, right now it is only red, if you guys can help me out, id really appreciate it, really this is most powerful notebook there is, i saved for year to get it and I got this crap, I am very very

    So I might have something here, during 10 minutes of play with normal FPS and also while not running anything, 4 cores gave readings:
    0:3692-3791
    1:3592-3692
    2:3592-3692
    3:3592-3692
    So not numbers in between, just these 2 figures for each core
    While not running anything readings on CPU temperature would change randomly between 48c and 55c every 1/3 of a second on every core, every core had different readings in between these ranges.
    After FPS drop readings changed at once to:
    0:3292-3791
    1:3292-3692
    2:3292-3692
    3:3292-3692
    CPU clock would change every 1/3 of a second and also ratio would change rapidly 33,36,37
    I closed the game, for 20 minutes leaving notebook turned on, readings stayed the same giving "after" fps readings, I tried to launch the game again, there was
    immediate low fps
    Consistency of readings on CPU temperature while running the game before and after FPS drop look the same and would change randomly between 54c and 60c every 1/3 of a second on every core, and for every core temperature would be different
    I left notebook for 30 minutes, turned off power fan, and temperature would be between 60 and 64 on some cores and 64 and 69 on others, while not running anything..can that mean that I applied new thermo paste incorrectly ?

  • Brand New GT70 2PE Overheating like hell!!!

    Hi
    I bought brand new gt70 just a week ago with 880m 8gb to my surprise it has serious overheating the gpu temperature sky rockets to 93c and it throttles to half of its original clock speed during loading screen of every game before even the game starts!!!!. I also tested it with k lite codec pack with gpu acceleration with just 2% utilization the temperature reached 90c. (using turbo fan at all times)
    I did a clean win 8.1 install with all latest drivers from msi also updated the bios , ec firmware and vbios still the same thing.
    Some idea what is going on here?
    Thanx waiting for response (:

    Dude seriously return the GT70 2PE and buy a GT70 with a 970m.  It will spank that 880m by a good bit and run a whole hella lot cooler.  Plus you gain a few new Maxwell features. 

  • MSI GT70 2PE 880m Bus Interface Question

    I recently purchased an MSI GT70 2PE with an nvidia 880m gpu
    The question i have is should the card be running with a bus interface of x4 at all times?
    gpu load when other screenshot was taken:
    The above is a screenshot of gpu-z while running its render test
    the bus interface always reads x4 3.0 even with games such as planetside 2 running at max settings
    I am on the latest nvidia driver and did install the vbios update from msi
    From other forums ive gathered it should be running at x8 when idle but should be reaching x16 when running games or stressing the card?
    If so is there any way to get it to work correctly?
    Edit:
    The only other state i have seen it in is this:
    which is x4 1.1

    Quote from: zipper.sippola on 05-August-14, 02:13:36
    Probably GPU-Z isn't up-to-date with 880M; my 680M is recognized as x16.
    This is probably it. Even though the 880m is a refresh of 780m and has been out a while. There are still plenty of programs and utilities that don't even identify it or know what it is. I'm sure things will get better.
    If you really need/want to know if it is 4x or 16x lanes, then run a game on it with clear documentation of settings for that chip and results on a non multiplayer game. If your laptop isn't running all 16 lanes, then it should run far slower than the rest.

  • MSI GT70 2PE Pro Shuts off after power up and sleep mode, then works

    I got this laptop less than a year ago and I am kinda getting upset about my decision buying it. It is the GT70 Dominator Pro with the GTX880M graphics card.
    Only thing I did was install a SSD drive for my main drive and use the 1TB drive that it came with as a storage drive. Everything was working perfectly for about 4 months without any issues.
    My problem started with the laptop shutting off in the middle of playing Watch dogs and wouldnt boot to windows, so i went to the BIOS and found out for some reason it changed my primary drive to the storage so i changed it back and all was good. After about a month it similar thing happened but this time I couldnt even get to the BIOS, after pressing the F10 or whatever it is for BIOS the computer freezes in a black screen.
    I contacted MSI and sent it out for warranty, they had to change the whole motherboard as it was not serviceable (Issue was a faulty MB).
    Last week the laptop started acting up again, here is my issue. When powering it on the fan and light comes on but after couple of seconds it turns off, then powering it on for 2nd time it works. This happens 80% of the time, i have to turn it on twice before it works.  Even more frustrating thing is when it is at Sleep mod, I press the power to wake it up, so it does but before getting to windows screen it shuts off.
    I was wondering if anyone have similar issue like mine or know what could cause this. My tower PC that i built have a MSI board and graphic card thats why I went with their laptop but I had pretty bad experience with it so far and its not a cheap laptop either. I might have to go through another warranty work if it keeps giving me the issue.

    Try update IRST driver.
    https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=24006

  • Really unusual and non-standard situation with Apple ID...

    Hi everyone!
    My name is Roman and I'm form Kyiv (Ukraine).
    I will really appreciate any ideas concerning possible solve of mentioned below situation:
    My wife is using iPhone 5 and the day before yesterday she made an software update to ios 8.0.2.
    Everything went fine... and after activation system asked for the appleid and password. The problem is my wife forgot the password and asked me to solve this issue. Later on i went to "iforgot" and asked to sent the 'reset" on her e-mail, but this e-mail is [email protected] (system sends the recovery link on the mailbox where i need to access). Paradox. Moving on I've tried to find out what was the alternative e-mail and checked all our possible mailboxes and did not find any mention of the appleid. Finally, I've decided to reset the password with the security questions. And another shot is on the first step (indicate birthday) none of our family birthdays are suitable At the very end we've called to the apple support center and tried to manage this mass with the operator. Unfortunately we did not indicate the credit card details while icloud account creation. Last chance is the security questions since as we found out there some unusual stuff with the alternative e-mail (as we been told). We had to answer two of security questions. (It is not a problem). But, when we call to nearest apple client service (in Moscow) (we wait for 20 - 25 minutes) and than operator kindly asks to provide answers and spell those. (And if you do at least one mistake or misunderstanding in spelling of any word you have to call back in eight hours and try again). As far as we saw, from Ukraine spelling might differ somehow via land-line talk.
    I understand that the security is a high priority always and respect this.
    Please let me know if there and chance to provide all the information somewhere (f.e. serial number, id scan, family photos, all known details, etc.) to solve this issue?
    P.S. If there is no solution, than I'll probably have to buy the new iPhone to my wife

    Did you contact Apple via iTunes Store Support: http://www.apple.com/support/itunes/contact.html
    Other posters here have reported prompt responses with similar issues. And, no, your apps are attached to the account under which you purchased them, so creating a new account will not work.

  • Cannot install lion from mac appstore. i have a macbook pro early 2011 model with 10.6.8 and i keep getting a wierd error NSInternalInconsistencyException i have no idea what to do.

    I cannot install lion from mac appstore. i have a macbook pro early 2011 model with 10.6.8 and i keep getting a wierd error NSInternalInconsistencyException i have no idea what to do.

    I changed my wireless broadband to a landline-base DSL wifi and it works like a charm. Sun was the culprit even you fiddle with its router and disable firewall, it won't work.
    try changing yours too and let me know how it goes.

  • I have an iMac os x 10.4.11 but I am having problems with Flash Chat. About 3 weeks ago, I can no longer type in messages and send them in any Flash Chat situations. I have uninstalled and re-installed Flash Player 6 times but still have the problem.

    I have an iMac os x 10.4.11 but I am having problems with Flash Chat. About 3 weeks ago, I can no longer type in messages and send them in any Flash Chat situations. I have uninstalled and re-installed Flash Player 6 times but still have the problem.

    I have an iMac os x 10.4.11 but I am having problems with Flash Chat. About 3 weeks ago, I can no longer type in messages and send them in any Flash Chat situations. I have uninstalled and re-installed Flash Player 6 times but still have the problem.

  • Using RSLinx OPC with Labview 2009 SP1 and Getting Wierd Problem

    I have a small test system with 4 analog inputs and 4 analog outputs. Oddly, I can use the Labview Distributed Systems Manager and read the input (level) changes and stroke the analog outputs (valves). However, when I go into a VI, I can get the level readings (only the first time I enter, after that not), but can never stroke the valves. Looking at the shared variable setup in both the project I am using and the Distributed Systems Manager, I have them both set up the same as a PSP with the same OPC reference, although formerly the project used project-attached shared variables.

    Using the timed structure set at the same acquisition rate as the OPC interface corrected the problem.

  • Wierd bug with menus and subtitles on Intel mac

    I have found DVDSP4 will not let me place buttons on a menu!! The mouse clicks don't do anything in the menu viewer. I suspect some system incompatibility is this is also why I can't drop a subtitle into the subtitle streams either with DVDSP4 enev though it works fine on DVDSP3 on my G5 machine. Has anyone seen this strange bug before?
    I use a Wacom Intuos tablet, have a four-core Intel MacPro with 4GB of RAM, and use a LOT of graphic applications (FC5, Motion, Maya, Poser, Vue, Illustrator, Photoshop, and many molecular modeling packages)
    Has anyone seen this problem before (and is there a remedy)?
    Thanks
    tom hsu

    Do you have the Universal Version of DVD SP? I know you mentioned it is academic but did not recall if you have the proper one for the Intel Macs(?)

  • GT70 2PE poor performance with GTX880M with 4gb vram

    got this laptop lately .. getting only 30 fps in World of Tanks game on medium to high settings while the same setting im using are getting 50-60 fps on another laptop with GTX780M 3gb vram gpu ... how can i fix this issue ?

    I'll be honest, I don't play WoT and I know little to nothing about the game.
    And unfortunately, you're not the first person that I've seen complain of a problem with that game specifically.
    Do other games behave the same as WoT? Or do they work fine?
    If the other games work fine, I'm thinking it's probably a problem with WoT in general and there won't be much anyone here can do to help it unless they are experienced with it.

  • Msi gt70 2PE integrated HD 4600 graphics HDMI port does not appear to work.

    Hi guys,
    I have the GT70 2PE with integrated hd 4600 graphics and with a dedicated nvidia geforce gtx 880m card. The HDMI output does not appear to work.
    I'm tech savvy and cannot figure this out for the life of me. have tried nearly everything.
    lets start from the low level troubleshooting done:
    - plugged in the HDMI cable from a working computer that has HDMI hooked up to it. This did not make a difference from the new cable I bought for hooking up my TV to my laptop.
    - booted the laptop up and do not see a duplicate screen outputting via HDMI, all my video cards in my PC's I've built prior have always shown the HDMI output as a duplicate screen when I had a monitor hooked onto a PC. This makes me believe the HDMI port may be disabled/broken as there is no HDMI output at POST. Only the laptop monitor displays output.
    In Windows 8.1 I've installed the latest 4600 drivers and nvidia 880m beta drivers.(even though installing nvidia drivers shouldn't matter since I've read the HDMI output is tied to the 4600 integrated graphics chip, also if during POST the HDMI output never showed up on my TV, then installing the latest intel graphics drivers shouldn't have made a difference either, which it didnt make a difference).
    I've tried disabling the integrated graphics card then re-enabling it, as noted on the intel forums. - does nothing.
    what I've ruled out:
    -HDMI cable issues = no issues due to other PC's and devices working with the cables. All cable tests are direct connect to the TV, no intermediary devices such as hdmi splitters etc.
    -BIOS has zero options for graphics card options.
    Any ideas before i RMA this laptop? I'm at a loss. 

    OP's problem has been solved.  Also please don't resurrect and do not hijack other people's topics. Open your own one.
    >>Please read and comply with the Forum Rules.<<
    Topic Locked

Maybe you are looking for