WiFi ( 802.1x EAP TTLS PAP ): Unable to connect since 2.3.3 update

I previously posted this on the Motorola Owner's Forum and am still waiting for a fix or at least an official confirmation of the problem. 
Ever since the 2.3.3 update, I have been unable to connect to the wireless network at work.  The connection worked fine prior to the update.  The connection at home with WPA still works fine. 
The network status cycles through the following sequence:
Scanning...
Connecting to <network>...
Obtaining IP address from <network>...
Disconnected 
The corporate configuration is as follows:
Security: 802.1x
EAPEAP method: TTLS
Phase 2 authentication: PAP
CA certificate: (unspecified)
User certificate: (unspecified)
Use proxy server: (unchecked) 
When I go into Manage Networks and select Modify network for the configuration, I find that Phase 2 authentication always shows None.  If I change it to PAP and then click Save, the setting does not stick: the next time I check the configuration, it is None. 
I've done a factory reset.  I've configured the network settings with WiFi Advanced Configuration Editor.  I've configured the network settings with WiFiConfig Editor Pro.  All to no avail. 
Please help.  I need to be able to connect to the corporate network.  If there is a known issue, it would be nice if someone would at least confirm it. Thank you.

My original Droid actually worked with the Andriod 2.0 release, but 2.1 broke it and it hasn't worked since.  I believe the Android codebase DID fix this, however Verizon has not made it a priority to include the fix in their releases.  I now have a Droid 4 running 2.3.6 and it is still broken.  Many of my coworkers have this same issue, but ONLY THE ONES ON VERIZON!  Other carriers have apparently figured out how to port this fix into their releases, regardless of which Android phone. 
Come on Verizon, fix this so we can stop wasting your 4G bandwidth!!!

Similar Messages

  • WiFI authentication and Eduroam (EAP-TTLS / PAP)

    Hi,
    eduroam (EDUcation ROAMing) is the roaming infrastructure used by the international research and education community (universities).
    At least in Australia and AFAIK also in Europe.
    Most sites use EAP-TTLS / PAP authentication (and it appears there are good technical reasons for it).
    The current Symbian OS does not support it out of the box.
    (or at least I couldn't find it on my E51)
    Is there any solution (application, etc) able to supply this functionality ?
    Cheers.

    e61drc: thanks, indeed, you are correct.
    bife71: the e51 have mschapv2 (guess what ms stands for which require an active directory backend while pap may use practically anything (e.g. an ldap) ... this being a good technical reason why large organizations may prefer pap.
    Well, from a company claiming "Connecting People" I am rather disapointed.
    (further research turned out that this feature have been widely requested for at least 1.5 years)
    Cheers.

  • Support for EAP-TTLS-PAP (as used by Eduroam) in N...

    When it will be available a solution to the lack of support for EAP-TTLS-PAP (as used by Eduroam) in Nokia N86 8MP throught a new firmware?
    To many years waiting... Must we go to another solution?
    Thx.

    I have succeed to import the local certificate using the instructions in
    http://www.jacco2.dds.nl/networking/symbian_cert_import.html
    then the description in
    http://www.reading.ac.uk/internal/its/eduroam/its-eduroam-config-nokia-n95.aspx
    works with the given certificate.

  • N95 EAP-TTLS + PAP

    With the plethora of encryption options available on the N95 I was highly surprised to notice that PAP was not an option. My University network (UPenn) requires EAP TTLS PAP. Does anybody know if this will be incorporated in the future via firmware or other (possibly third party) software?
    Thanks!

    I've just made Eduroam work on my N95 in Oxford University thus (I'm on firmware 11.0.026 date 17-04-07):
    1. Make sure the root certificate for the authority that signed your radius servers' certificate is in the root store of your phone. Oxford uses Globalsign which is not there by standard.
    2. Choose WPA/WPA2 for the WLAN Security Mode
    3. Choose EAP as the WPA/WPA2 type
    4. Choose WPA2 only mode and make sure it is off
    5. In the EAP plug-in settings enable only EAP-TTLS and choose that. Set the Authority Certificate to match the one that signed your radius server's certificate.
    6. Set your username and realm both to be user-defined and put them in the right boxes (my realm is ox.ac.uk).
    7. Use the right of the centre button to move on the EAPs tab and enable "EAP-MSCHAPv2" ONLY. DO NOT ENABLE "MSCHAPv2".
    8. In the settings for EAP-MSCHAPv2 provide your username (and password if you wish, or set it to prompt for it).
    As we say in England, Robert is then your parent's brother.
    You should now be able to use that network connection for web browsing, email, SIP and anything else you might choose.

  • E61 EAP-TTLS PAP

    I'm trying to connect to a network secured by EAP-TTLS PAP. Is there a plug-in that I'm missing or is it available in the latest firmware?

    23-Oct-2006
    12:05 PM
    e61drc wrote:
    does not support EAP-TTLS-PAP and this functionality cannot be added
    Yeah sure....there is a diference between cannot and will not be. I am pretty sure that it is possible to add pap since there are no hardware limitations for adding it.
    BTW why does it say plugin if you can't add a plugin?

  • Unable to connect to cluster to retrieve updated CMS member list.

    Hi,
    1.We have total 3 unix servers gesprddwbo01, gesprddwbo02, gesprddwbo03
    2.We have 2 cms running on servers bo01 and bo02 and both of them
    are clustered.bo01 is main server and 02 is clustered
    3.We have shut down server 02.
    4.But when I am trying to login to CMC, I am getting error "Unable to
    connect to cluster to retrieve updated CMS member list."
    I think we need to change clsuter settings since one cms has been
    deleted which was part of clustering.
    ======================================================================
    Below are details of my environment :
    Product : BO XI R2 SP5 FP5.3
    OS : SunOS 5.10 Generic_118833-36 sun4u sparc SUNW,Sun-Fire-V440
    Database : Oracle 10g
    ======================================================================
    Thanks,
    Swapnil Rodge

    search SAP notes for your tomcat clustering or cluster.properties. You need to add your cluster members to the web.xml or the cluster.properties file (some direction is in the web.xml file to follow).
    Regards,
    Tim

  • Connecting EAP-TTLS-PAP network on 5800

    I am studying at RMIT University and we have both eduroam as well as the university's own WPA network. I was trying to connect to it (V50) and was unable to connect. I was using the help of this guide http://sites.google.com/site/pramudi/connecting-to​-eduroam-on-nokia-5800-symbian-s60v5 before I found out that RMIT uses 802.11x security mode with PAP encryption. Can anyone help me? Here's a link to their setup guide for Linux: http://mams.rmit.edu.au/ua7mgpk79jzez.pdf
    I set it up and then it says TTLS authentication failed.

    I've just made Eduroam work on my N95 in Oxford University thus (I'm on firmware 11.0.026 date 17-04-07):
    1. Make sure the root certificate for the authority that signed your radius servers' certificate is in the root store of your phone. Oxford uses Globalsign which is not there by standard.
    2. Choose WPA/WPA2 for the WLAN Security Mode
    3. Choose EAP as the WPA/WPA2 type
    4. Choose WPA2 only mode and make sure it is off
    5. In the EAP plug-in settings enable only EAP-TTLS and choose that. Set the Authority Certificate to match the one that signed your radius server's certificate.
    6. Set your username and realm both to be user-defined and put them in the right boxes (my realm is ox.ac.uk).
    7. Use the right of the centre button to move on the EAPs tab and enable "EAP-MSCHAPv2" ONLY. DO NOT ENABLE "MSCHAPv2".
    8. In the settings for EAP-MSCHAPv2 provide your username (and password if you wish, or set it to prompt for it).
    As we say in England, Robert is then your parent's brother.
    You should now be able to use that network connection for web browsing, email, SIP and anything else you might choose.

  • Wi-fi eap-ttls - PAP inner security?

    i've just got a blackberry 8900 and i can't connect to faculty wireless network due to a "pap - inner link security" demand.
    anyone knows any program that can solve that? i've googled a bit and haven't found anything. (few opened topics that all end without a solution).
    too bad blackberry doesn't support this since lots of universities (www.eduroam.org) and public organizations use this kinda protection, at least in my country. i believe this is a software, not hardware issue, any ideas on this "feature" ? any words from the developers on this issue?
    greetz, robert

    TTLS-PAP is also used commonly by many organizations with non-Microsoft directory systems. And is commonly used by American universities as well. All three of the schools I attended, Harvard, Berkeley and UPenn, all used TTLS-PAP to secure their wireless networks.... Wild guess, those schools could be filled with idiots, but I'd venture a guess that they have people smart enough to deploy a wifi network properly.
    Xandrex wrote: 
    It's a question of being secure, and of being tolerant towards servers that are not secured.
    This isn't accurate. Yes, PAP is not a secure password exchange method. But it is being sent through a TLS tunnel which is very secure. That is like saying sending a password in a web form through a SSL tunnel isn't secure. Well, actually, it is.
    Also, it isn't for RIM to decide what is / isn't secure on user's wireless networks. Your analogy of SSLv2 just doesn't jive. If security was even an issue (it isn't) and PAP isn't supported because the RIM's great banevolence to their users, why is WEP still support? Or why are open networks supported?
    All arguments aside TTLS-PAP is a very commonly used 802.1x authentication method supported by Windows Mobile, iPhone, Web OS, Mac OS X and Windows... RIM needs to get it together on this one.

  • HT1688 my wife has Iphone 3gs she is unable to connect to safari with net 10

    my wife has an Iphone 3gs and has Net10 service but she can't load Safari she had net 10 do a diagnostic on her phone and everything checked out is there a fix to this problem?

    After reading a few more posts, I also tried the following:
    airplane mode on, power off phone, power on phone, airplane mode off, wifi on
    And
    airplane mode on, wifi on, restart phone, airplane mode off, wifi on
    Still unable to connect to ANY wirless network

  • DPM 2012 R2 unable to connect to Database after failed Update Rollup 4 Installation

    We have a DPM 2012 R2 Server with SQL Server 2012 installed locally.
    We tried to install Rollup 4 for DPM 2012 R2 (KB3009516) using Windows Update
    and it failed with error code 0x80070643. Now when we open the DPM Console
    it is totally empty (no Protection Groups, Servers, Disks, just like a fresh install).
    In the eventlog we get a lot of Errors and warnings:
    Event 941 (MSDPM)
    Unable to connect to the DPM database.  Make sure that SQL Server is running and that it is configured correctly.
    Cannot open database "DPMDB" requested by the login. The login failed.
    Event 4209 (MSDPM)
    The description for Event ID 4209 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
    If the event originated on another computer, the display information had to be saved with the event.
    The following information was included with the event:
    DPM Writer encountered an internal error.  Please restart the DPM Writer service, and then try the backup operation again. For additional troubleshooting information, review the application event log and the DPM Troubleshooting Guide.
    Event 107 (Report Server Windows Service (MSSQLSERVER)
    Report Server Windows Service (MSSQLSERVER) cannot connect to the report server database.
    Event 274 (SQLISService110)
    Microsoft SSIS Service:
    Registry setting specifying configuration file does not exist.
    Attempting to load default config file.
    Then there are some Errors/warnings from SQLSERVERAGENT about failed scheduled Jobs.
    I think the failed Installation changed some database Settings, so that now the DPM Console
    cant access the database anymore.
    I would be happy if someone can help me getting this Server working again!

    Our biggest problem is, that the DPM is not working any more. So there is no chance to backup the SQL Server via DPM.
    I think the main problem is that DPM have no access to the database. Every time I start the DPM Application, I get an error "verify that the DPM service is running on this computer". In the eventlog are many errors that the msdpm service was unable
    to connect to DPM Database. Another "information" is that the user 'nt authority\system' failed to open the database of dpm.
    We've tried to reinstall the DPM but its still the same problem. I suppose that is a corrupt database.
    Tomorrow I try to restore the database and hope it will be the solution of our problem.

  • Unable to connect since a few days

    unable to connect to icloud.com since a few days

    I think Apple now requires that Java apps be signed by a developer to run, so there might be some Gatekeeper issues going on.
    Uninstall the Java app and Java according to the developers and Oracles direction.
    Then install Java again and the Java app again and if it won't run, then control or right click on the app and say "open" this will allow it through Gatekeeper.
    Another option is to be methodical and go through this list of fixes until something works.
    ..Step by Step to fix your Mac

  • I just updated to lastest OS,  i get error msg unable to connect to server. After update, I couldnt complete the update process.  How do i fix?

    I couldnt complete the process after the update.  The system wouldnt accept my 2nd email address.  Now i am unable to restart that process.  I get Unable to connect to server everytime i try to access my ICloud from my iphone

    If you buy an iLife '11 install DVD (eBay, Amazon) you could upgrade your iPhoto right away. The earlier iPhoto '11 versions are compatible with MacOS X 10.6.8.
    but I can't until I upgrade from OS X 10.6.8.  Trying to figure out how to do that...
    To upgrade to Mt. Lion see here:  You can buy it and download it from the appStore, if your mac is compatible:
    http://www.apple.com/osx/how-to-upgrade/

  • 802.1x/EAP-TTLS and EAP Certificate Policies

    Hello,
    I am having a hard time with 802.1x authentication against a radius server I manage. Every time I try to connect, I get a pop up about certificate verification - the certificate cannot be verified because there are no explicit trust settings. This system is to be used to authenticate people on a wireless network we are setting up. The machines and people being authenticated are not managed - I do not have the ability to force a configuration on their computer.
    After researching this it looks like OS X has certificate policies that are consulted depending on the certificate operation requested. For 802.1x, I think the EAP certificate policy and the x.509 basic policy are consulted. These policies are outlined here.
    The problem is that when I get the certificate popup and hit 'View Certificate', I don't see anything that would explain why it is not being verified. Both the server certificate and the CA root certificate are listed as valid. There are no messages about insufficient extended key usage values or hostname mismatches or anything. How can I tell what is actually wrong?

    I was hoping this could be accomplished without having to change the trust settings from whatever the default is. The people who will ultimately be using this are students and staff at a University - a moderate number of which are bothered by any appearance of lower security.
    The root cert is in X509Anchors. The certificate CN is the IP address and the RADIUS server does not have a PTR record in the DNS server.
    If I point Firefox at a website set up on the same machine with the same certificate, there are no complaints. If I use Safari, there is an error about the names not matching but the name listed on the cert according to Safari is the same name I typed in the address field and the same name listed in the ServerName configuration of the web server.
    Just kind of a weird problem.

  • Extremely slow speeds on EAP-TTLS PAP secured network

    I have a Dell Inspiron 1525 with a Broadcom 4312 wireless chip and when I connect to my schools network I get speeds that are as low as 100 K/s or slower.
    When I go to speedtest.net I get speeds of 10 M/s down. I have tried using both the B43 and wl drivers and I get about the same speed on speed test and still very slow speeds when updating through pacman or downloading files.
    I am running the most recent versions of the kernel and all drivers.
    Here is the output from lspci:
    0b:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
    If you guys have any ideas of what might help I'm willing to try it, thanks in advance.

    Visited the Apple store today and they replaced the phone. They could not explain what was going on except for being a software issue.
    They said if after restoring I have the same issue, you would have to restore the phone to new and re-install all apps and information manually from scratch.
    I restored the phone from my backup, and all went well. No more slow LTE speeds, plus a new device.
    The only thing I can think of that may have happened is updating carrier settings while updating the iOS at the same time. I thought it was normal because iTunes popped up the carrier update notification a few seconds later after starting the iOS 8 update.
    The carrier update did have an option to cancel. I will definitely wait for the iOS update to complete before I update carrier settings next time.
    I'm just wondering if my phone was out of warranty, and this happened, would Apple still replace the device?

  • IPhone USB/BT/Wifi Unable to Connect after iTunes 10.7 Update

    If anyone can help, it would be greatly appreciated!
    Background: 
    I received and installed the iTunes 10.7 (21) last night.  This morning, my MBP would not connect to my I phone via Wifi/USB/BT. I did some digging and apparently this is an issue with this iTunes update.  I have subsequently removed iT 10.7 and reinstalled iT 10.6.3 and successfully retrieved the archive library.  That all seems to be working well. 
    By way of trouble shooting the iPhone 4, I've been able to establish link to the Wifi and USB with my work Windows laptop, and wifi with my iPad 3 MacBook, so I'm reasonably certain that it is working correctly.
    Hardware:
    MacBook Pro:13/i5; OS 10.6.8 with all updates.
    iPhone 4: iOS 5.1.1
    I really don't want to update OS/iOS at this time for a number of reasons... like I really use the maps and would like to wait until that issue is fixed for iOS6.
    So, what have I missed?  What tweak did the 10.7 update do that I can undo?
    I'm sickeningly dependent upon my iPhone/hotspot and this is most distressing!
    Anyone know how to correct this?
    Best regards,
    John

    A bit more...
    iPhone4 connects with the cable, I can sync, update, etc... just no wifi/BT/USB data...

Maybe you are looking for