WiFi 802.1x - keeps thinking it is WEP
Hello,
I have just upgraded my iPod Touch to 3.1 and there continues to be a problem getting 802.1x (with machine certificate) working. The interface keeps thinking that the network is WEP enabled (I told it the network was WPA2 in iPhone Configuration Utility) and prompts me for a password!
Help.
Thanks,
Did you set it for WPA2-psk or WPA2-enterprise? WPA2 does require a password if you are using the psk version. I've never setup an enterprise version of it so I can't help you with that but a password prompt doesn't seem out of the question either.
Similar Messages
-
What does it mean when I click on my wifi name and it show I'm on my wifi, but the network keeps thinking and the ipad says, Safari cannot open this page because it is not connected to the internet. ?
When you click on the WiFi network name, have you also provided the password for accessing the network? You should get a dialogue box asking you for the security information the first time you connect.
If you are not able to connect, you might want to go to Settings > General > Reset > Reset network settings.
Then go back to Settings > WiFi and select your network name again and make sure the security information is now entered correctly.
If you still cannot connect, power down the router, wait a few minutes, power up the router, with the iPad powered down the whole time, and after the router has had several minutes to stabilize power up the iPad. See if it now connects correctly. -
My ipad3 seems to have connection issues. It is wifi only but keeps losing the connection and is really slow in loading pages - a bit like dial-up speed! My iPhone 4s and daughters' ipad2 have no problems at all. Any ideas anyone?
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Can my mid 2011 macbook air be upgraded to wifi 802.11ac?
Can my mid 2011 macbook air be upgraded to wifi 802.11ac? I am considering replacing my 802.11n router with the 802.11ac time capsule. Will this effect my download speed on my 802.11n macbook air (mid 2011)? can it be upgraded?
No, you cannot change the Wi-Fi hardware in your Mac. The Time Capsule is still worth it due to its ability to make backups of your Mac via Time Machine.
-
My iphone wont let me connect to my wifi it just keeps saying 'activation server is temporarily unavailable' what do i do?
Ask him. In any case, if it was jailbroken, you cannot get help here for jailbroken phones. Sorry.
-
how do I get iphone to reconnect to my home wifi, the circle keeps going around
Hello VanSlyke333,
Thanks for using Apple Support Communities.
For more information, take a look at:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Unable to connect to a Wi-Fi network
Verify that you're attempting to connect to your desired Wi-Fi network.
Make sure you're entering your Wi-Fi password correctly. Passwords may be case sensitive and may contain numbers or special characters.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
Have a nice day,
Mario -
How do I print to wifi printer while keeping data from cellular?
How do I print to wifi printer while keeping data from cellular?
If you print to a WiFi printer no Cellular Data will be used.
-
My mac keeps asking for my WEP key to get on the internet why?
my mac keeps asking for my WEP key to get on the internet why? And where can i find it
It's referring to the MAC password that you have setup.
A software prompts for a password only when there are restrictions set on the user account for unauthorised access to system files and folders. -
iPhone says "cannot connect to iTunes" I am hooked up to wifi and I keep getting this error... Any ideas?
Hi ...
Try this support article > Can't connect to the iTunes Store -
I have downloaded a tv series to watch while travelling without wifi. It keeps freezing on me, how do I stop this?
Try this:
1. Close all inactive apps in the Task Bar
2. Reset iPad
3. Try TV series again -
my iphone just doesnt charge it gets too hot nd says it needs to cool down it doesnt connect to wifi also doest keep a long charge doesnt download apps pretty much doesnt work
So bring it to Apple for evaluation. Can you not figure that out by yourself?
-
Projects won't load--computer just keeps "thinking" for hours!
When trying to work in iMovie, it gets hung up at the point where it is trying to load all of the stored projects. It just keeping "thinking" for hours until anything loads and by the my computer is frozen or locked up.
I have had the same issue over the last couple of days. Imovie just doesn't load up for me. I tried trashing the preference/plist but it still doesn't respond. any solutions?
-
I am trying to do an iCloud backup from my computer. I have been unable to do a backup from a wifi as I keep getting message that it cannot be completed. What is the secret to doing this from my computer, with my iphone plugged into same?
How are you trying to do it from your computer? Try plugging it into your charger while connected to wifi, then either lock the screen and wait (it should backup up ever 24 hours) or go to Settings>iCloud>Storage & Backup and tap Back Up Now.
-
My wife and I were thinking to buy Ipad 2's to be able to facetime while she is stationed at US Military base in Kuwait. Will facetime work? Thank you for your help.
Assuming there no restriction on the network she would use blocking it, it should.
-
What is the better Connection on Apple TV v2, Ethernet or Wifi 802.11n????
Does not support with ethernet gigabit?If you have stable wifi with good connectivity it should work fine - in reality many people struggle with wifi.
I was plagued by interference issues with wifi whenever the microwave was used and would always use ethernet now as my first preference for stability.
As the house is not wired for ethernet several years ago I tried mains powerline network adapters that are made by many companies.
I use these from Devolo currently:
http://www.devolo.co.uk/consumer/81_dlan-500-avmini_starter-kit_product-pictures _8.html?l=en
They are excellent and you can create a wired network in minutes without running long lengths of cable.
As with wifi they never achieve the highest rated speeds and are dependent on the wiring quality but are more than adequate for HD streaming to multiple AppleTVs.
Many other manufacturers produce these eg Belkin, Netgear etc as well as lesser known brands.
AC
Maybe you are looking for
-
T500 BIOS upgrade v3.00-1.03 bootable CDROM won't flash
Model is a 2081 CTO running Windows Vista x64 SP1. Downloaded and burned to a CDROM the image 6fuj30uc.iso. As per the instructions, I tried installing the hotfix as required by MS KB 937500 but it does not install saying the update does not apply to
-
Displaying Single Datablock field in Multiple Record Data Block
Hi all I have a master detail block for cash transaction recording. Master Table name CahMaster and datablock contains columns Cash Bill No, Date, Customer ID, Misc Freight Charges. Detail Table name is CashDetail and datablock includes product id, p
-
Dear sir/madam my mobile model is 1325. in this mobile display prob. now iwant change display. iam asking some mobile shops. all are told that display not available. but iwant display . how ?
-
Need to keep full Backup on hard drive?
If I'm using Time Machine, do I need to keep a Backup.sparse image (98.07 GB) from 2 years ago on my hard drive? Do I need to have any backup at all on my hard drive? I have a feeling I've been needlessly suffering (from slow speed) for a long time
-
Bluetooth Keyboard is not connecting
Hi, I am having trouble with my Bluetooth keyboard as follows: I havn't used my keyboard for a while as I was moving house but as soon as I got my desk set up I noticed the batteries where flat so I changed them. Anyway it would not connect to my com