Wifi and bluetooth seem as if they are disabled

Ive tried resetting phone. should i try connecting it to a computer?

You can try restoring your phone, but after that faiils you'll need to bring your phone to Apple for replacement.  Your WiFi/Bluetooth chip has failed.

Similar Messages

  • Wifi and Bluetooth Hardware not getting detected

    Hi, I need help from HP. Wifi and Bluetooth hardware on my laptop are not getting detected. I have installed the drivers properly but the hardware  itself is not detected when I start the notebook. The wifi had problems initially but then it worked fine for sometime and now it is not detected at all. Same is the problem with bluetooth also. The hardware is not visible in the device manager itself. Please let me know the possible problems and also help me with the solution. Thank You. Model - HP Compaq 15s001-tuOS - Windows 7 64 bit.

    Since the wifi and bluetooth functions come from the same mini-pcie card it seems likely it has failed.  This is the Service Manual: Your Manual See p. 61. Unfortunately getting to the module requires extensive disassembly, but short of removing the motherboard.  The wireless module itself will be very inexpensive. But you may need to pay somebody to install it.  If this is "the Answer" please click "Accept as Solution" to help others find it. 

  • IPhone 3Gs Network, Wifi And Bluetooth Off On 4.3.3

    Hi, it was two days (so from yesterday) that I have big issues with my iPhone 3Gs with iOS 4.3.3. It not have falls, so I don't think it's hardware problems, because it seems that all the connectivity modules restart. Network (3G or 2G), Wifi And Bluetooth seems to be off and again on, and repeats. First I try to restart, but nothing is fixed. Then I try to restore and insert backup, restore on DFU and insert again the apps, but this afternoon it restart the problems, and restarts itself two times. It strange because I see that the "Personal Hotspot" appears together with this issues. I posted images for explain better (the time is different because is not easy to shot the moment of the restart of the modules. I want to remak that since yesterday morning I never have this problems.

    ind my iphone is turned on turn this off and  wifi will come on again also do a network reset after this then you can turn FIND my iphone on again  job done
    Complete nonsense.  Find My iPhone has nothing to do with the grayed out wifi issue which you clearly don't understand - tuning it on and off does nothing. 
    ya donkey
    Your post is donkey excrement

  • My nook app continues to state "Please be sure you have internet connectivity, then try again."  I am currently connected to wifi and it seems that all my other apps that need to be connect to the internet are properly working.  Help!

    My nook app keeps telling me "Please be sure you have internet connectivity, then try again."  I am currently connected to wifi and it seems that all my other apps that need to be connect to the internet are properly working.  I have turn off my phone, signed off my wifi, installed a new app, but nothing is working.  My friend is having similar issues.  My phone is up to date.  I even tried taking off the wifi in hopes that it could just connect to the 3g but nothing.  Not sure if anyone else is experiencieng this issue or knows what I can do.  I think that it may be an app problem that needs fixed, but not sure. Help!

    Maybe its a Viber problem. As that is not an Apple product, why don't you try and contact the developer?

  • My wifi and bluetooth are no longer active

    my wifi and bluetooth are no longer active .Does anyone could help me? already gave reset and nothing.

    Hello WPilot,
    The article linked below details a number of troubleshooting steps that can help restore functionality to your iPad's Wi-Fi and Bluetooth.
    iOS: Wi-Fi settings grayed out or dim
    http://support.apple.com/kb/TS1559
    Cheers,
    Allen

  • HT1430 my wifi and  bluetooth is grey, cant get it on. I restarted, reset, and went to itunes to reset.  None of these options are fixing the problem??

    my wifi and bluetooth setting are greyed out, cant turn on, i reset, restarted, and went to itunes, nothing works??

    I did some hunting and have found that your Apple ID needs to be registered in the country where you first downloaded the app (whichever ones are giving you trouble)
    I needed to change my region back to the uk and now my apps are downloading. Thank goodness!!
    I think I read somewhere that apple had changed a setting or something(?) when updating their ts&cs.
    I hope this helps people!!
    I also had deleted my apps but re installed them when I connected to my computer.

  • Hello.  I am about to migrate over to iCloud.  I don't think I see my situation addressed. I have one mobile me account and a separate appleID for purchases.   I have 4 devices and my wife has two. Right now they are all using the same mobile me account t

    I don't think I see my situation addressed. I have one mobile me account and a separate appleID for purchases.   I have 4 devices and my wife has two. Right now they are all using the same mobile me account to sync just the calendar and address book.
    1.)  I want to add email syncing for my 4 devices and email syncing for my wife's two devices separately, but we want to sync and share the same calendar and address book.  Is this possible?
    2.)  I also have 5 different calendars, one for work, one for home, one for... etc.  Is there a way to have different devices only sync certain calendars and not others or is it an all or nothing deal?
    Thanks in advance for any tips!
    S

    To begin with, I would like to try to explain Apple's confusing nomenclature in regard to iCloud.
    Apple have called the whole cloud thing iCloud, there are a number of features under the iCloud umbrella, some of which require their own login. iTunes is one of these, another is what Apple have unfortunately also called iCloud.
    You can use the same Apple ID (account) to login to both iCloud and iTunes, but you don't need to and often users will login to each service using a different ID.
    The part that you need to remember is that the services available when you log into iCloud are completely different and unrelated to those when you log in to iTunes. Your iCloud login enables mail, contacts, calendars, find my phone, Back to My Mac, Documents & Data sharing and photosstream, it does not affect any of your iTunes services.
    To avoid confusion when discussing your problem, when I mention iCloud, I am referring to the services under the iCloud login, Whereas I will refer to the whole cloud thing as The Cloud.
    Generally speaking it is not a good idea to share an iCloud account between different people, it often results in contracts, calendars et cetera being deleted by others. Saying that however you can add secondary iCloud accounts to your devices at settings> mail, contacts, calendars. Secondary accounts do not have all the features of a primary account, but are often very useful. Because you can enable or disable each individual feature of an iCloud account, you can cover almost any situation by using secondary accounts.

  • HT4157 I don't have celluar data on my Ipad. what app do I use? In  the place on the Apple support screen there are, Airplane mode, Wifi and bluetooth.

    I don't have celluar data on my Ipad. what app do I use? In  the place on the Apple support screen there are, Airplane mode, Wifi and bluetooth.
    Thank you in advance for your help because I don't want to take this back but if I can't figure out how to use it, I will have to.

    Henry ~ Welcome to the Support Communities.
    Henrypublisher wrote:
    I am connected to a very strong Wifi network but I still can't access anything online like my gmail account, Netflix, Safari or anything else.
    Go HERE and see the section: "If you are unable to access the Internet while connected to a Wi-Fi network".

  • Yoga 13 WiFi and bluetooth issue resolved

    Unfortunately, I also met WiFi problems, but also found unexpected and sad solution.
    Wifi worked pretty well at working place, but had problems at home. As an experiment I brought WiFi router from the working place home. It did not work!
    At home I used pretty old keyboard and mouse plugged into passive USB hub. As soon as they were disconnected, problems disappeared. WiFi was also stable after I plugged power supply into the USB hub.
    We are making 24-bit analog-to-digital converter that connects to the PC via USB. I exactly know its current consumption (300 to 330 mA) and know that it correctly handles USB rules about power regulations. Maximum current, specified by USB2.0 standard, is 500mA, so consumption of our ADC is within limits. As soon as I plug this ADC in, WiFi connection immediately disappears at the working place.
    In the case of other devices, such as USB flash drive, power consumption may depend on the activity, increasing as it writes or reads something, and decreasing at the moment of inactivity.
    I'm pretty sure that Lenovo placed their WiFi/bluetooth module on the same USB hub with right-side USB2 connector. Any device, that requires energy, being plugged into USB2.0 port, immediately destroys WiFi (and presumably bluetooth) and it is rather hard to get it back alive without special dancing around.
    So, conclusion: never plug anything into USB2.0 port, if you need WiFi. This decreases number of available USB ports from two to one. Lenovo team should be blamed for that, not driver manufacturers or board manufacturers - Lenovo did non do its construction job well.
    I am not sure, that all WiFi and bluetooth problems of Yoga discussed at this forum have the same reason. But in any case incorrect implementation of USB2.0 power should be considered before any other reason of malfunction.
    Car manufacturers recall their products in the case of a failure. What about computer manufacturers?

    Citation from Wikipedia:
    The USB 1.x and 2.0 specifications provide a 5 V supply on a single wire to power connected USB devices. The specification provides for no more than 5.25 V and no less than 4.75 V (5 V ± 5%) between the positive and negative bus power lines. For USB 3.0, the voltage supplied by low-powered hub ports is 4.45–5.25 V.[61]
    A unit load is defined as 100 mA in USB 2.0, and 150 mA in USB 3.0. A device may draw a maximum of 5 unit loads (500 mA) from a port in USB 2.0; 6 (900 mA) in USB 3.0. There are two types of devices: low-power and high-power. A low-power device draws at most 1 unit load, with minimum operating voltage of 4.4 V in USB 2.0, and 4 V in USB 3.0. A high-power device draws, at most, the maximum number of unit loads the standard permits. Every device functions initially as low-power — but may request high-power, and get it if available on the providing bus.[62]
    Obviously, WiFi adapter is a high-power device. If it does not have sufficient power, it will start power saving program by reducing speed. Even lower power may interrupt ins basic functions. When I connect another high-power device (HDD or ADC) to the same hub, it should get its 500mA from the hub. Seems that starting at this moment  WiFi receives much less current than it requires and stops working. 
    If something is plugged into USB3 port, and this something does not utilize all energy it requested, WiFi starts working again.
    I would greatly appreciate if somebody repeats my tests using Yoga or Yoga 2 Pro.
    Test:
    Reboot your system, all USB devices disconnected
    Open http://www.speedtest.net site and measure Download connection speed (Speed1)
    Connect external HDD to USB2 (NOT USB3!) port
    Wait until HDD is connected
    Test Download speed once again (Speed2)
    Report results to this blog as Speed1/Speed2 couple of numbers
    Thank you in advance

  • IPad wifi and Bluetooth greyed out after iOS5 update

    After updating to iOS5 on my iPad my WiFi and Bluetooth were greyed out like the update has caused a hardware failure on the radio side.  My SIM and 3G still work (not that I use it) but I can not even choose wifi or bluetooth in settings app as they are greyed out.
    In Wifi it says "No Wi-Fi" and Bluetooth it says "Unavailable"
    I wasn't using it a lot so just forgot about it for a while as it sat gathering dust being an expensive paperweight thinking that the next software (5.0.1) update would sort it all out.  It doesn't.  I have a 64GB iPad 3G with no wifi and as I am living abroad the 3G is useless to me (though only use the ipad at home on my wirless network anyway, or not as the case is now!!)
    I have restored, factory restored, cleaned installed new software, everything I can think of but still there is no wifi and no bluetooth.
    Has anyone else had this issue?  My (very expensive) iPad is now next to useless!!
    ANY help is VERY much appreciated.

    thank you for fast response and sharing the link but i've tried everything including downgrade but it seems that theres a serious problem with MC497LL model and trying to reach to the support for any updates about it at least trying to inform them

  • TS1559 still no solution for greyed out wifi and bluetooth - what to do? been messing around with it for weeks and now discover I'm just outside of warranty period? WHAT?

    I am in such a predicament - phone not been quite right since the 6.1 update and I was tolerating the inconvenience of switching off and on etc etc for the past couple of months and now the wifi and bluetooth are totally greyed out all the time - did every restore possible including back to factory settings - still no luck - please don't tell me that trying all the solutions over the past 2 months that temporarily worked for a few days at a time will now mean I have timed myself out of the 1 year warranty? arghhhhh (I can't believe that such an issue will create the response 'oh well, your problem - best just buy another one' ???)
    I can't just drop everything and drive to the apple store and wait for hours every time there's a 'glitch' otherwise I may as well move nextdoor to the mall. They tell you to try and solve it yourself first - which I did - and now it's not responding to anything I try, will I be told - 'too late, out of warranty'???
    I see theres an update for the iphone 5 that fixes wifi bugs - what about us 4s owners? even my 3 year old 3gs is still working on wifi (haven't dared to update it!) so don't start telling me to expect that the iphone will only last 13 months - NOT AT $600 a piece
    This is madness and driving me crazy
    Please has anyone had any luck fixing this problem???

    well, you know how it is - glitches that usually resolve with a hard reset etc
    then a restore. then a factory restore....then ..... nothing fixes so I try the next step with apple online - fill out my serial number and find it is a couple of weeks out of date - and then with the holidays who has time to get to the apple store? this is my second 4s handset as it is - first one the glass cracked from L to R without any impact/damage etc - they changed it out automatically because it's a 'known fault' apparently - so technically, this handset is only 6 months old - but warranty is from original purchase date -
    never imagined it would turn out to be a warranty issue with the phone - and hey maybe when I get a chance to go to the apple store they'll be sympathetic, but I won't be able to get there till at least Jan 4th as it is. On the other hand, another iOS update might resolve the issue - but how long till that release? at the moment I'm having to use my old 3gs for wifi and 4s for phone!!!

  • Grey wifi and bluetooth

    I have an old iPod  that my friend gave me and I thing the wifi and bluetooth antenna is broken because in the setting they are both greyed out and I can't click them. If I take it in to an apple store can they fix it or replace it or what?

    Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    Try here first.
    iOS: Wi-Fi or Bluetooth settings grayed out or dim

  • Why did my max loose wifi and bluetooth?

    Not sure if it was after last update or when.  But my phone lost wifi and bluetooth.  I didnt even realize until I got a data alert. I have tried a full reset witch made me very unhappy due to the apps I lost.

    Usually if you just turn the device on and off may have fixed your issues.
    A hard reset in my opinion is not necessary. If phone makers send out junk updates that actually make the devices work worse, they never should release these junk updates.
    Is your WiFi and Bluetooth functioning now? Your apps are not lost since in Google play store select MY APPS then from the list simply reload them back on the device. Both free and paid ones.
    Good Luck

  • IOS 8.1.2 breaks Wifi and Bluetooth on iPhone 4s

    Since I upgraded my iPhone 4s to IOS 8.1.2, i am unable to use wifi or bluetooth.
    My wifi button is greyed out and I cannot turn it on.
    Bluetooth will just display a spinning wheel when i turn it on.
    I have tried resetting network settings twice, multiple re-boots/re-sets. Toggling Airplane mode. Turning off iCloud. All to no avail.
    Just to be clear, this is not an intermittent issue or a slowdown or anything like that.
    IOS 8.1.2 has completely disabled wifi and bluetooth.
    Anyone else having these problems or got a resolution?

    Yes, but first time in the several years to have a problem. Using Outlook on Mac with MS Exchange Server. I have Exchange set up on both iPhone and iPad. Talked to IT and they are making sure MS Exchange Server is fully updated tonight.

  • HT6146 my wifi and bluetooth is not working what sholud i do

    when i upadte my iphone 4 in ios 7.1.1 my wifi and bluetooth is not working
    what should i do ?? :(

    What doesn't work?
    What problem are you having?
    Remember for the iPhone to see and connect to Bluetooth devices they must be in, "Discovery Mode".

Maybe you are looking for

  • Language attributes for business objects ERC_CDCY

    Hello, I need to activate TREX index ERC_CDCY from our e-recruiting system using SES_ADMIN transaction. When I activate it, I receive error message UNCAUGHT_EXCEPTION (CX_SY_OPEN_SQL_DB) at the relational index level (Relation of candidacy). I opened

  • Best practices for cleaning up an old CSS?

    We have a legacy help system that we've put into RH 9.  Our CSS has a lot of old styles in it.  Is there a best practices document somewhere that we can use to learn how to clean up the CSS and remove old styles but still preserve the ones we want? t

  • LOV with 3 record groups

    I have two LOV s one in the mainform and one in the subform. If I select one category from the list in the mainform LOV. In the subform LOV has to change it's record group (3 record groups) depending on the category selected in the mainform LOV. Plea

  • Active Job Options folders nested in hot folders no longer an option?

    This was possible in Acrobat 6.0 (nesting job options in hot folders to produce files with different options using the same distiller automatically). Any Ideas why this does not work in Acrobat 9? The How-to is on this website. http://www.planetpdf.c

  • Is there any relation between oinv,inv1,owhs,oadm..

    hi. i am developing on layout in crystal report.. oinv,inv1,owhs, are  i am including.. i put parameter is DocEntry..based on this one data is comming. my question is can i add one more table oadm..... is there any relation between these four table..