WiFi and Ethernet at same time with Apple TV?

Will the following configuration work? WiFi Router upstairs is connected to the internet (DSL). Could I put a second wifi router downstairs acting as a relay, connecting it to an Apple TV via a short ethernet cable and connect to the Apple TV from my MacBook Pro via an ad hoc wifi network? I don't want to simply put the Apple TV into the network since that means traffic for the Apple TV would have to first go upstairs to that router and then be sent downstairs to the Apple TV. In short, I'd be using the Apple TV both to drive the TV as well as a router to the internet. Possible?
Ted Lee
Minnetonka, MN

Okay, I turned it off and back on and now the wifi symbol shows up instad of LTE. Must have been a glitch.
Also found out we must have dropped the block on external mail accounts at work.
So, problem solved.

Similar Messages

Recording Video and Audio at Same time with simultaneous sync

I want to record a keyboard performance into garageband and at the same time record the playing of that performance with my video camera. Then I want to create a movie using the music from garageband and the video from the camera. I was thinking that if I can sync the video and audio when I'm recording the session, then that part is taken care of. Or, maybe this is easier than I think it is?
Is there a way to do this so that I can use the garageband record performance and have it synced to the video on the camera?
I don't want to use the audio from the video camera because the performance that is captured in Garageband will be much better and I can do editing of the individual notes in GB.
In the end, I just want to make a movie and/or podcast of the performance.
I'm a newbie regarding this, but I did search the forums and couldn't find anything specific. Mostly it was about importing video into GB3 and then syncing new audio. I'll basically have audio and video from the same performance in two separate locations and I want to bring them together perfectly in Garageband.
Thanks for any help you can provide.
Powerbook G4 - DVI Mac OS X (10.4.9)

Okay. I got the video and audio all together. I told you I'd link to it when it was up.
http://www.youtube.com/watch?v=FxssYpUNJm8
There's also a copy of it at http://www.myspace.com/bonjimmy/
And as a quick side comment, even though I uploaded the same video to both YouTube and MySpace, the MySpace version is much better. YouTube must do something to the video after it's uploaded.
What I learned doing this project:
I recorded the video first (which gave me the sequencing of the piano performance) and then I dubbed the audio in later. However, there wasn't a good way to sync the video and the prerecorded piano, so there are some spots where the dubbed audio vocal isn't accurate to the video. I'm not sure what the pros do for this. I was hoping I'd remember how I sang for the video but when a couple weeks go by before re-doing the audio, it's about impossible. I tried, though.
I remember working with an old 4-track and smpte to a sequencer a long time ago. With the way it is now, it's pretty cool that you can record digitally and mix and match and everything falls together perfectly as long as you have a place to match the video and the audio. It's pretty cool.
What else???
Does anyone have suggestions that would have made it better? Also, if you have suggestions on my performance or whatever, I'd love comments, but you can do that on the linked page.
Thanks again for all your help. (The point of the video is because I'm thinking about getting back out there and doing some more playing... I'm looking for a band or something else interesting...)
Powerbook G4 - DVI Mac OS X (10.4.10)

Using airport and ethernet at same time

I am networked from my intel macbookpro to a G5. I cannot connect to my airport at the same time i'm plugged into ethernet cable. Is there any way around this. This can be done when networking with mac based G5's. I guess it has something to do with the intel technology.

I guess it has something to do with the intel technology.
Actually no, you should be able to connect multiple interfaces (ethernet and wireless) concurrently.

Exporting report as PDF and CSV formats same time with out executing DB query twice

Post Author: cpriyanka
CA Forum: Exporting
I am using Crystal Report 9.0 version and Java.
I am getting "PrintOutputController" from "ReportClientDocument"
And then by calling export(ReportExportFormat.PDF) generating PDF format report.
Now I need to generate both PDF and CSV format files same time. How can it be done?
My understanding is when we call "export" it does the DB query execution and other functionality.
In that case, if I call "export" two times with two different formats, then DB query will be executed twice and that takes lot of time.
To avoid, is there a way I can all some API so DB query executed once, but I can export report in to multiple formats?
I appreciate your help.
Thanks.

Post Author: cjmorris1201
CA Forum: Exporting
Hello,
Are you using the "pull" or "push" method for your crystal reports? If you are using the "pull" method (the report itself executes the sql) then I believe there is no way around having the query execute twice since it is fired off each time you open and export the report.
If you use the "push" method, however, then you can just create the recordset/dataset and then set the datasouce once for the report.
Here's a broad overview of push and pull though the Crystal Report Viewer is used. The viewer may or may not be applicable in your case:
http://aspalliance.com/265_Crystal_Report_for_Visual_Studio_NET#Page5
Regards, Carl

Airport and ethernet at same time

I've got a feeling this is one of those obvious questions which has an obvious answer. I noticed in the network pane of the preferences lists out every type of adapter available to me to connect to a network. I always leave my airport on even when I'm connected to a network with an ethernet cable. So my question is this, if my airport and ethernet are connected to different networks (in my office they're kept separate), which takes priority? Should I turn off one adapter? Just a curious mind.

Whichever network port is above the other in the list of available ports in the network preferences panel this will have priority.

Bridging wifi and ethernet; bring interface up with netcfg

using bridge-utils I was able to establish a bridge between my ethernet port and my wireless interface. My wireless interface is the source of the Internet connection on the computer, and the ethernet port is going to send that Internet connection to a nearby computer. My questions are:
Is it possible to bring this bridge up via netcfg, so that the wireless interface connects to the desired router?
If not, how can I use a bridge to bring up a wireless Internet connection using other applications, so that I can write a script to trigger it when I need it?

So I had this working for a while, and lately I've been using it to bring Internet access to my Xbox 360, which is even more distant from the main router than the desktop I had been using. It is also a much better use of the bridging in economical terms, since the wireless component for the Xbox is $100 (price gouging jerks...).
Then yesterday I tried it and the Xbox wouldn't connect. After fiddling around, I found two things out:
1. Since the last time I connected the Xbox to the net, I had ran yaourt -Syu, which updated iptables from 1.4.5-x to 1.4.6-1
2. The specific issue is that, despite the following line in my "ethernet-xover" network profile...
POST_UP="iptables -t nat -A POSTROUTING -o wlan0 -j MASQUERADE ; echo 1 > /proc/sys/net/ipv4/ip_forward ; /etc/rc.d/iptables save ; /etc/rc.d/iptables restart"
... /proc/sys/net/ipv4/ip_forward isn't getting set to 1. Once I manually set it to 1, the connection works.
So I'd like to take this opportunity to peer review this profile, to a) see why echoing is failing, and b) find out if it is really necessary to restart iptables as shown here.

Can't set up email on Iphone and Mac at same time with Outlook 2010

I installed outlook 2010 on a Mac and set up the email account. When I added the email account to my iphone my outlook stopped working. Gave me the error "Trying to get mailbox lock from process". I deleted my iphone account and my outlook email worked

Hello afrost24,
Thanks for the question. It sounds like your account may have been setup using POP, see the following article:
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/TS2621
For more information on using a POP account:
Using a POP account with multiple devices
http://support.apple.com/kb/HT3228
Thanks,
Matt M.

Possible to use Airport and Ethernet at same time?

Short question: I want to use my wired Ethernet connection for my local area network to access my file servers and other computers on my network, and a wireless Airport connection for Internet usage.
Is this possible? How?
It seems that with both "on", I am connecting to both via Ethernet and it is forgoing the wireless network entirely even though it shows as connected to my wireless network.
PowerMac G5 Dual 2.5GHz Mac OS X (10.4.3)

This is normally done like this.
Your Internet Service Provider furnishes you a Modem.
You run an Ethernet cabale from your ISP's Modem to the Wan Port, or uplink port on your wireless Router, ( You will have to purchase the Wireless Router.
Wireless Routers are available in 2 4 and 6 port varietys.
Anything you plug into the ports as many computers as you have ports for hard wired connections. This will allow for wired and wireless connections to the Internet and all can be used simultaniouslly.
Remember each machine you have connected will have to have the correct setting in the Network Preferences.
This can also be done with a Switch or a Hub each varys a little bit on the confiquration.. If you need more information be specific on exactly what all you are trying to hook up and what ISP you have the Modem they furnish, the exact router you are using and the number of machines and how they are set in the Network setting on each,
Normally any wireless router you purchase will give you a step by step on hoe to set it up, in the paper work that comes with them. Good Luck Don

Need help - connecting Monitor and TV at same time with component video

I have a mac mini, connected via DVI to a monitor - I bought a DVI splitter to connect the monitor to one port and the tv to the other via a DVI to Video adapter, using component video. When I plug in the DVI to Video adapter, the primary monitor loses its connection and I cannot seem to get the TV to recognize the signal - what am I doing wrong?

In my case, the Barco Cine7 CRT projector I would like to connect the new Mini to accepts a pretty wide variety of analog component video formats, but I cannot find a listing of what the Mini supports. Presuming I use a DVI to VGA adapter and then a VGA to RGB cable, can the mini video card output any one of the following analog component formats:
RGBs or RGsB - R, G and B with automatic sync detection between seperate sync (separate composite sync or with separate hor and vert. sync) or sync on green (composite sync)
RGB with tri level sync - R, G and B with separate tri level sync or with tri level sync on green.
Component video - R-Y, Y and B-Y with separate sync or with compositesync.
Component video with tri level sync - R-Y, Y and B-Y with separate tri level sync or with composite tri level sync.

I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

After the Apple logo appears, what happens then? Can you hear any sounds or if you tap on the screen, does it seem like apps can open or are you just seeing a black screen? You might have a hardware problem, but you can try restoring the software and see what happens.
Read this in its entirety before you do anything. Make sure you read the sections at the end about using recovery mode.
iTunes: Restoring iOS software - Support - Apple

My wife is very color deficient and has a hard time with the font colors in call log. Any way to change and does Apple have plans to correct?

My wife is color deficient and has a hard time with the font colors in the phone log and messaging. Is there any way to change color or background and does Apple have plans to correct this?

There are some minor settings in Accessibility that you can look at, however it really isn't much for color changing. As far as what Apple might have in mind, we are not Apple here, we are users like you. It is against the terms of service to speculate what Apple might have in mind. If you want to provide feedback to Apple, that is done here: www.apple.com/feedback and click on the appropriate link.

How to change apple id on iPhone. Wife and I have same apple ID. Get each others iMessages. want to put her on another cloud with different id.

How to change apple id on iPhone? Wife and I have same apple ID which causes me to get her iMessages instead of her. I also get all her pics on my phone and I don't want them. We need to change her apple ID without causing my ID and cloud to be closed.

Have her create a new ID.   Here: https://appleid.apple.com/
Have her log out of iMessage/Facetime/iCloud on her device.   Now have her use the new ID she has created.
That should keep the 2 of you separated, except for iTunes purchases.   You can share that ID in a family up to 5 devices.

Can I have my Time Capsule wifi and my Verizon router wifi on at the same time?

I want to have my verizon wifi on at the same time as my time capsules wifi but I don't know if it interfere. There's an app that you can use as a remote for your cable box but you need to be on your routers wifi.
Thanks,
Zach

Suggest that you run a few speed checks on both wireless networks with a computer in same room as the wireless router using a site like www.speedtest.net on your browser.
If you are getting close to your plan speeds, then you likely do not have interference issues.
Most routers will scan to find the best available channel to use, so assuming that your equipment is working OK, things should be OK. Try to keep the Verizon router and Time Capsule at least 6-8 feet, or a few meters from each other.
This assumes that you are not living in a crowded situation like an apartment complex, where intereference is pretty much a fact of life due to the very limited number of wireless channels that are available.

My ipod has a black screen. I have tried to hold the sleep/off button and menu button at the same time with no luck. I connected to my computer and tried restore on itunes - still with a black screen a voice said "screen locked' code 542

My ipod has a black screen. I have tried to hold the sleep/off button and menu button at the same time with no luck. I connected to my computer and tried restore on itunes - still with a black screen a voice said "screen locked' code 542

Is the iPad charged? Plug it in with the charger/wall outlet for half an hour and try again to reboot by holding both the power and home buttons until the apple logo appears.

Can I run Apple TV 1 and 2 together on the same iTunes account and on the same tv with two hdmi slots?

Can I run Apple TV 1 and 2 together on the same iTunes account and on the same tv with two hdmi slots?

Yes.
Captfred

WiFi and Ethernet at same time with Apple TV?

Similar Messages

Maybe you are looking for