Wifi and home network and printing

I just recieved my new MacBook Pro last week and certainly enjoying it, but have a few questions(bye the way, I'm a new Mac user):
I have a Linksys wireless router in my home and able to access my shared files on my xp machine, but sometimes after the notebook goes into sleep mode and when it wakes it can no longer detect my pc. The PC can still access the notebook though. Any thoughts? And At that same time I am able to still access the internet.
Also, the other night I received my first kernel panic attack and recieved the gray screen message and had to reboot. It happened while I was outside surfing the internet and I had lost my signal for internet and home network. I was picking up other wifi signal too and wondering if that could have caused it. I then made a call on my cordless phone and that is around the time of the kernel panic. Since then no Kernel panics. Again any thoughts? Should I be worried having a Kernel panic with a machine that is less then a week old?
Look forward to your responses.
MacBook Pro 2.2 ghz Mac OS X (10.4.10)

You can have a go using a wireless bridge.. eg the airport express will do this.. you can join it to the iphone wireless running as a hotspot.. and then plugged into the TC wan port.. the TC has to be setup in router mode.. so this is going to give you double NAT errors.. and of course errors for all the time the hotspot is turned off.. but it can work. However you might find it requires you to manually connect up each time.. If you are really going to try and do this you will manage it.. but how fiddly it becomes might put you off after a week.
You will chew up your 5GB very fast using any streaming media even radio. So be very careful to track the usage.
Apple should have built in the TC the ability to plug in a wireless 3G modem.. via the USB but Apple have ceased to do adventurous stuff.
If you give up the TC as main router there are plenty of better products on the market that will handle multiple wan connections.. !!

Similar Messages

Nvidia firewall and home networking and printer-sharing: how do you enable it?

Hey guys, finally my system is running at 100% after re-formating WinXP3 times which is probly one of the most painful experience i ever had.
I installed the nvidia firewall and it runs great but the problem is that when i enable it, all the other computers cannot see this MSI computer's shared folder and network printers because I think the firewall blocked it all.
I tried to change the secuirity setting to low and even added the IP address of all the other 3 computers to the firewall config w/o avail.
can anyone of you here enlighten me?

help~

Home Network and printer sharing with XP and Vista

   I have a home network and printer wired on my PC desktop which runs XP. My Vista laptop has been connected to internet and printer through the home network for past 6 years flawlessly. However, since October my Vista laptop cannot
connect to the network printer, but internet has been working fine.
   I've tried to uninstall/reinstall, update drivers, connect via TCP/IP but printer isn't located by add printer wizard. When I plug printer directly into laptop via USB it works fine. I also have tried another xp desktop in the house
and that cannot locate the printer also.     Help!
Thanks in advance,
Medic

What have you tried so far?
Have you seen this yet...
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1770.html
http://docs.info.apple.com/article.html?artnum=25609

I have ipad2, using wifi home network and ios7. Why I cannot play youtube...help!

I have ipad2, using wifi home network and ios7. Why I cannot play youtube...help!

You don't download anything at all. The feature is built into the iPhone 4 already. Your carrier has to support the feature and there might be an extra charge to use it.
You can read about how it works here.
iOS: Understanding Personal Hotspot - Support - Apple

I found a wifi network called linksys and it let me connect to the network for a while but now it wont let me. it says that the ipad 2 is unable to connect and we have tried to connect to the home network and it didnt pick up the signal.

but my laptop will. so my grandson restarted the home network and the ipad 2 still wont pick it up. but my laptop will pick the home network.

Start here.
http://www.apple.com/support/ipad/assistant/wifi/
http://support.apple.com/kb/TS1398

Not printing text-only graphics on Canon. Not printer problem-print ok on Brother and another network Apple prints ok on Canon. Believe a computer setting was inadvertently reset. What setting and how do I reset?

Not printing text only on Canon--grahics print ok. Not printer problem. Prints ok on a Brother and another network Apple prints ok on Canon. Believe a computer setting was inadvertently reset. What setting and how do I reset?

Without your printer model numbers, readers can only give you vague general directions.
System Preferences > Print&Fax > ...
... shows a list of all set-up printers.
If you are having serious problems, it makes sense to "Reset the Printing System" (which also removes all printer set-ups) and add back each printer. It only takes a few minutes.
Mac OS X 10.6 Help: Resetting the printing system

I'm currently signed onto my home network and want to go on with another computer but don't remember my password for my network. Does anyone know where to find this? It's a password that I set myself, not the one that came with my router.

I'm currently signed onto my home network and want to go on with another computer but don't remember my password for my network. Does anyone know where to find this? It's a password that I set myself, not the one that came with my router.

It's in your Keychain on the computer you usually use to connect to your network - the "kind" will be "AirPort Network Password".
Your Keychain can be opened by using the Keychain Access program. It is in your Utilities Folder.
Open Keychain Access, and type airport in the search field. You will see a number of entries. Choose the one with the name of your wireless network, open it, and check the box next to "show password". Before it reveals itself you will be asked for your login password - the one you use to log in to your MacBook.
The network password will appear in the box.
Quit Keychain Access.

I have a Mac on my home network and also a Systemline music server on same network. My PC was able to find the server but my MAC cannot. I can ping the server from the mac, but cannot actually connect . Also can't add the mac as a location from server

I have a Mac on my home network and also a Systemline music server on same network. My PC was able to find the server but my MAC cannot. I can ping the server from the mac, but cannot actually connect . Also can't add the mac as a location from server, despite following the Systemline instructions that impy this can be done.
Can anyone please advise what I am doing wrong?

Hi LowLuster
Thanks for reply. I am not an expert on these sharing protocols but I think I have turned on SMB sharing but still wont connect. I tried adding netwrik drive by using cntrl K in finder and using smb\\network address but nothing. It is driving me mad!!

Recently I was working on my home Network and lost my Password for my Home wireless connection. After many attempts, I remembered the password and was able to get in. Now the MacBook Pro only works at home on a Hard wire connection. I have an additional 9

Recently I was working on my home Network and lost myPassword for my Home wireless connection. After many attempts, I remembered thepassword and was able to get in. Now the MacBook Pro only works at home on aHard wire connection. I have an additional 9 devices on the same network, allare functioning properly. The Air connection works fine at any other Networksout side the Home connection. I did a PRAM reset, deleted the Network profileand rebuilt in System Preferences. Still unable to connect wireless on Homenetwork. Any Ideas?

I seem to have fixed it by putting <div class="clearfloat"></div> after the navigation bar?

Share iTunes Library on home network and edit from all computers?

I'd like to share my iTunes library on the 3 Macs on my home network and be able to edit the library (add songs, edit titles, add cover art, etc.) from any of the computers. Is there a way to do this? Thanks!

We're attempting to work out the same trick on another thread.
http://discussions.apple.com/message.jspa?messageID=6450437#6450437

Connect Fios to Cat5e home network AND Coax connections?

My Verizon fios system was recently installed. My home is wired for a Cat5e home network and standard Coax in all rooms. The fios system is currently connected to the Coax connections and the TVs and Fios router all work fine. Problem is that I would also like to use the Cat5e connections for devices that access the internet that don't have wireless capability and are not proximate to the Fios router. Is it possible to connect the ONT to my Cat5e home network so that I can connect other devices directly to the Cat5e outlets, and keep the existing Coax set-up?
I understand that the standard Fios set-up only allows using either an Ethernet output or the Coax output, but not both. Any suggestions?
One option might be to move the router to the basement (where the equipment is located that I want to connect to the Cat5e network), but then the router will likely be too far from the rest of the house to receive the wireless signal. In that case, is it possible to connect a wireless router in another location (I have a Belkin wireless router). Or do I need to get another router from Verizon?

DC_Sox_Fan wrote:
I just spoke to Verizon Fios Tech Support and they claim that it is NOT possible to use both the Coax and Cat5e connections. So, for those that have a Cat5e home network, but still want to use th Coax for TV, Verzon says you are out of luck.
Thats not strickly true but its not bad info either. You cant use both the coax and cat5 at the same time for INTERNET. The coax internet port (moca) is not active at the same time as the ethernet port. However, many systems use the ethernet for internet and coax for TV.
Depending on how your house is set up this can be accomplished many different ways.
I would assume that you have some kind of utility closet were all the ethernet cables converge, where you could place the router so that it can connect to all the rooms. Is this correct? If so, is there also a coax connection in there? Again, if so, you could place the verizon router in the closet, connect the coax to the router for the link to verizon and the TV's and then connect the ethernet to the lan for the rest of the house. This would be the simplest way assuming that you have this type of connection available to you. there are many other ways but it would all depend on what you have available to you and how your house wiring is set up
====================================================================================
Error exists between keyboard and chair.

N80 home network and WWW

I have recently purchased an n80 and I am trying to get the home networking and internet functional through my wirless router. So far I have had little success. I have enabled upnp on my d-link router/modem . I have installed The simple center software on my laptop and uploaded files to share. I have setup an access point on my n80 and I have enabled sharing. The shared folders on the n80 have also been selected to share all files. The simple center software has been allowed to operate through xp's firewall. THe only thing I am not sure about is the port forwarding on the router. I have a trigger port and a public port in the applications gateway section of my router . I have entered the ports listed in the simple centers setting section (1900,49153,49154,49152). I have these numbers in both the trigger port and the public port on the TCP protocol.
Occasionally I can connet to the internet. However when I close the connection down and try to start it up again sometimes it does not work , showing 'unable to perform operation'. The only way to re-establish the connection is to power the router down then backup(reset).
The same goes for the home networking. I had no success a all on the first day of trying. Went to work. When I came back tried it again and it worked perfectlly ?? Now on the third day it is working ocassionally.
Anyone else had simmilar problems ? If so any soultions would be appreciated ! The phone itself seems to be pretty glitcy. And battery life isnt the best either. Apart from that eh !

Forget that - just sussed it out...
I'm using v3.0617.0.6 (03-05-2006) RM-92, Nokia N80 (31.01)
I can't seem to get anything using the browser - I constantly get "Out of memory" errors, even when trying to use GPRS.
It moans something about "packet data" and then bombs out...

Parallels Desktop and Home Networking

I don't know if anyone has encountered a similar problem that I'm describing below.
Context: We have two MBP's at home running 10.4.9 connected over a wireless network. Both computers for some time saw each other easily over the network when appletalk was enabled and also shared files easily. All one had to do was to click the network folder in the finder window, and the other computer would show up automatically.
Recently, I installed Parallels Desktop Build 3188... and well, now neither computer could see or share files with one another. From checking all my network settings, nothing about the airport connect had changed, and appletalk was still enabled on both computers.
I could remove parallels, but obviously I installed the software because I needed to make use of some PC software.
Oh, and I have checked the Parallels website. Neither their support, documentation, or FAQ were of any help whatsoever.
Has anyone experienced this problem with their home network and Parallels?

I want to thank Joe and Tristan for replying. Just a follow up to both your comments.
First, I have my parallels VM set to bridged, rather than shared networking. As to which type is actually more secure for Win XP running within the virtual machine, well, I'm not quite sure and that's surely a topic for further discussion.
I have to report on the status of my network - well, I started seeing the other mac in my network folder again... but sporadically. I was doing what Tristan had suggested, unchecking the Parallels Host-Guest and Parallels NAT configurations. I suspect the following:
When my computer is first booted, having both the Parallels Host-Guest and NAT checked prevented me from seeing the other computer. Uncheck them, and all of a sudden the other computer appears on the list. However, at this point, I can re-check the boxes of the Host-Guest and NAT, and am still able to access the other computer. It's almost like the computer doesn't see it at first, but then when you take down the Parallels wall and put it up again later, the computer remembers that the other one was there. This is completely speculative, and needs a few more rounds of testing to be sure.
However, for now at least, I can get my network connections back.

HT4623 i am updating to ios 6.1 but i dont want immediatly i have shut down my iphone by holding sleep wake button and home button and cracks from that time and its not restarting

i am updating to ios 6.1 but i dont want immediatly i have shut down my iphone by holding sleep wake button and home button and cracks from that time and its not restarting

HarryAustralia wrote:
I recently updated my ipad wifi only to the new ios 6.1.2 and initially I had the auto cover lock option which can be seen in the Generals tab, but then it stoped working!! Before the update, the auto cover lock worked fine. So after trying all the options, I then did a complete reset on the ipad and now its gone all together from the General tab!! I can no longer see the "auto cover lock" option.
The iPad cover lock is for when you use a cover with magnets in it to lock and unlock the iPad when you close the cover or open it. Try running a refrigerator magnet along the sides of the iPad and see if that trips the iPad Cover Lock back into the settings.
That is not the same thing as the iPad Auto Lock setting which allows you to set an allotted time before the iPad goes to sleep.
You can try resetting all settings to see if the Auto Lock feature retinrs to the iPad.
Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. This can be a little time consuming re-entering all of the device settings again.

I make Rest for iPad, and now every time i open it , i chose the country and the network and tells me he works the activation and then tell me the iPad could not be activated, try again what can i do

i make Rest for iPad, and now every time i open it , i chose the country and the network and tells me he works the activation and then tell me the iPad could not be activated, try again what can i do

Those are the instructions for your computer's iTunes (i.e. using the Store menu at the top of your computer's iTunes and selecting 'View My Account' on it). If you are doing it on your iPad then are you following the instructions for iOS devices :
To unhide your purchases
Depending on the content type, open the App Store, iBooks, or iTunes Store on your device.
Scroll to the bottom of the main page.
If you're not already signed in, tap Sign In.
Tap your Apple ID name, then tap View Account.
Scroll down on the Account pane, and tap Hidden Purchases.
Locate the item you would like to unhide then tap the Unhide button.

Wifi and home network and printing

Similar Messages

Maybe you are looking for