Wifi and hotspot issue!!!!! Help

The wifi iphone 5 issue.  Is it effecting the iphone 5 hotspot ??

I purchased the IPhone 5 specificly for the mobile hot spot. I got rid of my MiFi and I have been working on this for 3 months. Phone was exchanged for new one and set up as new phone 3 times! What really makes me angry is that they put me through hours on the phone, going to the Apple store, restoring as a new phone and replacing all of my contacts, re-setting up my voice mail...hours of my time when they KNEW none of this would work!
They know these devices are defective but refuse to stand behind their products. They want me to take some small gift from the online store. I am not looking for something for free, I am looking for a solution. I asked if they would defray the cost of me obtaining a new MyFi and they refused to even consider it.
Apple has a huge pull on me because I am deep into the ecosystem of Apple. I did this because I trusted Apple. That trust is dead. I am giving them one more chance to see if engineering can come up with a solution. If not, I am off the AT&T to purchase a Samsung Galaxy and release myself from all things Apple.
If you are having the same problem, don't waste your time. Apple believes they no longer need to stand behind their products. It's time that consumers help Apple regain some humility!

Similar Messages

  • Wifi and camera issue HELP

    Iphone 4s wifi will not connect but is not greyed out , and front camera issue, I have no idea what has happen to it but it is just a black screen.

    Hi Jaccaj,
    If you are having issues with the WiFi connection and camera on your iPhone, you may find the troubleshooting steps in the following articles helpful:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    (under Camera section)
    Regards,
    - Brenden

  • N91 WLAN (WiFi) and Bluetooth Issues.

    Hi Everyone,
    I am having some issues with my new N91. I recently had the firmware upgraded, and the issues have not improved at all. I'm hoping someone out there has faced and solved some similar issues, or perhaps that you can point me in the right direction towards finding a solution of my own.
    WiFi (WLAN). Okay, the N91 comes with WiFi built in. I have been able to find networks, and browse the internet on my phone, in Infrastructure mode. It is pretty simple. The problem has to do with encryption.
    On my home network, I use WPA encryption with TKIP. The N91 configuration screens give me the option of using WPA with TKIP, but the phone won't connect. I tried changing to WEP on my home network, and configuring the N91 to use that encryption instead, but it also did not work.
    Since I use other computers on my network with WiFi, turning off encryption is not an option. I did test the phone and the router with encryption off, it connects.
    The issue is, the N91 will only connect to un-encrypted networks. This is fine for free hotspots, but I want to sync with my home PC via WLAN, send email and use the phone via VOIP. I also need to connect to encrypted networks on the road.
    Has anyone managed to connect to an encrypted network with an N91? Do you know what specific hardware you were connecting to, and what protocols you used?
    The second issue is Bluetooth. I drive a 2006 BMW M3 with bluetooth support. My old phone (Sony t630) connected to the car via bluetooth flawlessly. It shared the phonebook with my car, and automatically diverts calls to the car when I'm driving. I can answer the phone via a button on my steering wheel, which automatically cuts out the radio and allows me to take calls while driving.
    The Nokia "pairs" with my car. However, regardless of what I do, it will not share the phone book, nor will it transfer audio to my car's sound system. According to the Nokia documentation, the pairing process requires that a code be entered for the bluetooth device on the phone, and for the phone on the bluetooth device. I cannot set a code in my car (the bluetooth device), since that is not an option. I can set the code on the phone for my car, and the phone then reports "Pairing Complete". Setting a code on the car was not required for my trusty old Sony. Though the N91 claims "Pairing Complete" there does not appear to be any mechanism for activating the car handsfree via the phone, and the car does not automatically take a call if the phone rings while paired. (On the Sony, one can "Send Call" to a blue tooth device, if the device doesn't automatically take the call, or if the pairing takes place after the call has been initiated.)
    Does anyone know of a work around to get the phone to pair for audio (I can live without the phone book). Does anyone know of a third party application that will fix the blue tooth on the Nokia to make it work more effectively with my car?
    Any information that can be provided on either of these topics will be greatly appreciated. Thanks!
    Dan

    Hi,
    Thanks for the reply. Starting with the bluetooth aspect of your question. I can't say for sure which profiles the Bluetooth on BMW supports (still researching). I can say that my Sony t630 supports all of the protocols you listed, though I can't say for certain about the "AG" aspects. It lists:
    File Transfer
    OBEX
    Object Push Protocol
    Handsfree
    Headset
    And several others that I don't think are relevant to this particular issue. As I said, my phone lists "Handsfree" not "Handsfree AG". I'm still trying to research what if any distinction exists there.
    The important point is that the bluetooth on the BMW isn't wholly defective. It does work with at least one phone. The bluetooth on my N91 hasn't worked with the car, but I have no other hardware to test with. I don't think it is defective either. I believe they both function, I just need to figure out what needs to be done for them to play together.
    I think there are two questions that I'd like to find answers to. Has anyone ever modified a bluetooth profile on an N91 (or other Nokia)? Is it possible to add bluetooth profiles that don't already exist on the phone?
    As for the point I made about my N91 not connecting to encrypted networks. I am correct to assert that it does not connect to unencrypted networks, though syntactically I shouldn't say "The N91" since it implies too much.
    Semantics aside, my N91 can't connect to encrypted networks so far. My research on this site (and others) indicates other users have faced the same issue, and none of those threads came to a resolution that I could find. Searching this site, and others, I had found no documented cases of an N91 functioning on an encrypted network. Since posting (on another site) I have found one user who has had success, but that user hasn't yet responded to my question of how exactly he pulled it off.
    In the absense of any evidence explaining how to connect an N91 to an encrypted network, and the prevalence of people expressing difficulty with it; I think it is correct to say "The N91 will only connect with un-encrypted networks."
    I'd really like to be wrong on that statement, since I own the phone and I want to connect to an encrypted network. However, I haven't been corrected yet. So, if you can point me to a thread or discussion explaining what settings were used to make a successful connection on an encrypted WLAN of any type, that would be great.
    To anyone reading this or helping out, I really appreciate your time and attention. Please let me know if I can provide any other information to help with this question, or on any other topics.
    Dan

  • WiFi and hotspot

    my wifi will not connect to to web pages and the message is website not available my hotspot will not open and gives me the message cannot connect to AM

        Hello stollbek! Using Wifi is a great way to add additional value to your data plan! Have you tried changing the channel your router uses? I've seen customers have problems connecting to my wifi and it turned out that a house phone was using the same frequency as the router and was interfering. After changing the channel they had no more problems. Do you have a landline device that is connected to your cable or DSL service?
    In regards to your Hotspot, try taking out the battery for 20-30 seconds. This may reset your device and allow you to use the Hotspot feature. Let me know if this helps!
    ChaunceyM_VZW
    Follow us on twitter @VZWSupport

  • How can i fix my wifi and bluetooth issues in yosemite?

    Hi, after upgrading to Yosemite I've noticed that my bluetooth trackpad (Logitech t651) and wifi connection are having serious conflicts which result in sluggish trackpad response or occasional wifi connection drops.
    I would have some occasional sluggishness with my trackpad in Mavericks but it would never lead to dropping of my wifi connection. Here is a little more about my configuration, my wifi connection is 2.4ghz, I have read that upgrading to 5GHZ would solve this problem but this would of course require me to purchase a new router which I would like to avoid. I have noticed that if i turn off my wifi, my trackpad is 100% smooth and responsive so the two issues are definitely connected. Does anyone have solution to fix this problem that doesn't include changing the wifi broadcast channel (which I've already tried), switching to 5GHZ, or utilizing an ethernet connection? Thanks

    I think I'm having a similar problem, my wifi disconnects when a bluetooth device is connected to the MBA. 
    I have a MacBook Air (13-inch, Mid 2012) with WiFi and Apple Trackpad.  I'm unable to use the trackpad(bluetooth) and wifi at the same time.  If I turn off the trackpad then the wifi works fine and if I shutoff the wifi then the trackpad works fine.  This configuration was working fine prior to upgrading to Yosemite.
    I experienced the same problem at home and at the office.
    Additional test:
    I turned off the bluetooth trackpad and connected my bluetooth headphones to the MBA.  The wifi disconnected as soon as I paired the headphones with the MBA.
    I have had no problems with the MBA's keyboard or integrated trackpad. 
    Rick

  • Yoga 13 WiFi and bluetooth issue resolved

    Unfortunately, I also met WiFi problems, but also found unexpected and sad solution.
    Wifi worked pretty well at working place, but had problems at home. As an experiment I brought WiFi router from the working place home. It did not work!
    At home I used pretty old keyboard and mouse plugged into passive USB hub. As soon as they were disconnected, problems disappeared. WiFi was also stable after I plugged power supply into the USB hub.
    We are making 24-bit analog-to-digital converter that connects to the PC via USB. I exactly know its current consumption (300 to 330 mA) and know that it correctly handles USB rules about power regulations. Maximum current, specified by USB2.0 standard, is 500mA, so consumption of our ADC is within limits. As soon as I plug this ADC in, WiFi connection immediately disappears at the working place.
    In the case of other devices, such as USB flash drive, power consumption may depend on the activity, increasing as it writes or reads something, and decreasing at the moment of inactivity.
    I'm pretty sure that Lenovo placed their WiFi/bluetooth module on the same USB hub with right-side USB2 connector. Any device, that requires energy, being plugged into USB2.0 port, immediately destroys WiFi (and presumably bluetooth) and it is rather hard to get it back alive without special dancing around.
    So, conclusion: never plug anything into USB2.0 port, if you need WiFi. This decreases number of available USB ports from two to one. Lenovo team should be blamed for that, not driver manufacturers or board manufacturers - Lenovo did non do its construction job well.
    I am not sure, that all WiFi and bluetooth problems of Yoga discussed at this forum have the same reason. But in any case incorrect implementation of USB2.0 power should be considered before any other reason of malfunction.
    Car manufacturers recall their products in the case of a failure. What about computer manufacturers?

    Citation from Wikipedia:
    The USB 1.x and 2.0 specifications provide a 5 V supply on a single wire to power connected USB devices. The specification provides for no more than 5.25 V and no less than 4.75 V (5 V ± 5%) between the positive and negative bus power lines. For USB 3.0, the voltage supplied by low-powered hub ports is 4.45–5.25 V.[61]
    A unit load is defined as 100 mA in USB 2.0, and 150 mA in USB 3.0. A device may draw a maximum of 5 unit loads (500 mA) from a port in USB 2.0; 6 (900 mA) in USB 3.0. There are two types of devices: low-power and high-power. A low-power device draws at most 1 unit load, with minimum operating voltage of 4.4 V in USB 2.0, and 4 V in USB 3.0. A high-power device draws, at most, the maximum number of unit loads the standard permits. Every device functions initially as low-power — but may request high-power, and get it if available on the providing bus.[62]
    Obviously, WiFi adapter is a high-power device. If it does not have sufficient power, it will start power saving program by reducing speed. Even lower power may interrupt ins basic functions. When I connect another high-power device (HDD or ADC) to the same hub, it should get its 500mA from the hub. Seems that starting at this moment  WiFi receives much less current than it requires and stops working. 
    If something is plugged into USB3 port, and this something does not utilize all energy it requested, WiFi starts working again.
    I would greatly appreciate if somebody repeats my tests using Yoga or Yoga 2 Pro.
    Test:
    Reboot your system, all USB devices disconnected
    Open http://www.speedtest.net site and measure Download connection speed (Speed1)
    Connect external HDD to USB2 (NOT USB3!) port
    Wait until HDD is connected
    Test Download speed once again (Speed2)
    Report results to this blog as Speed1/Speed2 couple of numbers
    Thank you in advance

  • Wifi and time issues please help.

    My daughters iPod touch 5th generation is constantly resetting the time incorrectly, I had it on auto time in the correct time zone but it keeps eventually resetting to the wrong time then I tried manually inputting the correct time but it eventually reset again to the wrong time. It's also having issues picking up the wifi, we have 5 other i devices that have no problem with wifi so I know this problem is just specific to this particular unit. This has been an ongoing issue since day she got it Xmas 2012. I've tried restoring several times but to no avail. PLEASE can someone help. We spent a lot of money on this device and she can't use it to its full potential! :(

    If you restored to factory settings/new iPod via iTunes (Not via Settings>General>Reset>Erase all Content and Setting) and still have the problem that indicates a hardware problem.
    Make an appointment at the Genius Bar of an Apple store..
    Apple Retail Store - Genius Bar

  • Macbook Pro wifi and application issues, everything slow

    Hey guys,
    So my macbook pro has been giving me a lot of issues lately. It doesn't appear to be one particular problem and it's spread out across applications. Here's my situation:
    The wifi connection in my dorm room wont work all of a sudden. It's the schools wifi, so I can't mess with. But my roommate, who also has a macbook pro, is having no problems at all. So I think it's just my computer. It SAYS I'm connected to the internet and has full connection, but it doesn't go through.
    Here's the weird thing... I CAN connect to any other wifi on campus just fine. And all ethernet ports work fine.
    I'm also having trouble with a variety of applications. My Twitter app, mail wont load anything, Itunes store is slow or doesn't work, the App store wont open, Celtx.....
    I think it's all programs that require some sort of internet connection to function. And it's really strange how all these applications still don't work right even when I DO have internet connection (through ethernet or other wifi).
    Few notes: I've tried reseting the permissions, and I have 40GB free on my harddrive. It's been happening for a week now, and I've tried rebooting many times. I did a large software update right before it started happening, but I'm not sure if they are related.
    What do you think? Is this something I can fix on my own? Or is something damaged on my computer?
    HELP!

    Alright, Gryphonator, looks like you're being hijacked. Try the following:
    1) Go to this webpage and download the latest stable version of Opera (in case you don't know, it's a Web browser, and if you don't like it, you can ditch it whenever you want); save it to your Desktop
    2) Reboot your Mac in Safe Mode by keeping the Shift key down on startup until you get the Apple grey backdrop AND a progress bar. Once this shows onscreen, you can lift your finger from the Shift key
    3) Once in Safe Mode, you are not connected to the Internet (unplug your Ethernet cable before you do anything), and only the basic OS X kernel extensions are running, so try and install Opera on your regular user account
    4) Plug your Ethernet cable and try to connect to the Internet (you should be able to)
    5) Unplug the Ethernet cable, and reboot normally
    6) Once your Mac is up and running, try browsing the Web with Opera
    7) Let us know of your progress (or lack thereof...)
    The point of installing/using Opera is that it doesn't yet exist on your system, so it can't have corrupt plist preferences files and the like. Installing it in Safe Mode will prevent whatever is playing with your Internet connection from wreaking havoc with install.
    Finally, for all its flaws, Opera is probably the safest Web browser there is. I've never been hijacked once in all the years I've used it, even when using Windows as my primary OS (see, you CAN turn to the Dark Side of the Force and come back!)
    Keep us posted!

  • Changed wifi and hotspot in iOS 8. No longer supports router.

    HI all.
    The necessary background...
    I don't have fixed Internet at home.
    I utilise a wireless router that when I directly connect my iPhone 4 (7.1.2) or my iPad (prior to update to iOS 8) would initiate the usb hotspot function on either device where I then can utilise network based stuff (Apple tv, lappy, printer ect). I can go as far as to connect my iPhone to the router have the hotspot active then also simultaneously access the wifi signal from the router to the phone.. Helps get around the download limits imposed when updating stuff.
    I find now that my iPad (iOS 8) can't establish a usb hotspot connection with the router. It can do the usual creatation directly plugging into the LAPPY or creating a wifi hotspot just not directly to the router.. I've done the usual turned on and off, reset network and cycled via the power home button stuff.. I've not gone down the full restore but if my hand forces it I'll try that.
    Finally the question.
    Did or has the Apple writers restructure the hotspot and wireless coding where it makes such things defunct? Any known work around?
    cheers,
    Dave

    I would just like to add that I've now upgraded to a 5S and a new router. The 5S connects fine (7.1.2) aka tethers via USB where the iPad (8.0.2) still no connectivity!!
    I'm sure this is on deaf ear's, still folks a spending good coin on stuff and the line in the sand keeps moving .

  • Twitter issue and hotspot issue

    Just got my N9 and have 2 issues that i've noticed so far.  1st while in the twitter application it will not let me see trending topic.  Second issue is that the hopspot doesnt 'work.  if i try to launch it it says wireless network not allowed.  Any ideas?

    for twitter, do the following:
    make sure that you have enabled developer mode:
    open xterm (do not devel-su into the terminal)
    gconftool --recursive-unset /system/http_proxy
    gconftool --recursive-unset /system/proxy
    gconftool --recursive-unset /system/osso
    this wipes all the bluetooth connections and internet connection data as well, but that is easy to redo.
    for the wifi hotspot do the following:
    open xterm (devel-su into the terminal)
    echo 1 > /sys/devices/platform/wl1271/allow_adhoc
    note: you will have to redo the echo command each time your device is rebooted as it reverts to default upon the boot.

  • Find and Replace Issue Help Requested.

    Hi all. I've been digging around for a couple of days and
    can't seem to figure this one out. For starters, I have already
    looked at the Regular Expression syntax and tried the MS word
    clean-up option, but no luck. We have about 1,500 pages of content.
    They are in DNN, so the pages are created dynamically.
    Unfortunately, the page content was written in Word and then dumped
    in DNN. We are trying to clean up the pages. We are grabbing the
    content from Dot Net Nuke and putting it into Dreamweaver 8.0.2.
    Then we are manually cleaning out things like:
    <?xml:namespace prefix = o ns =
    "urn:schemas-microsoft-com:office:office" />
    and
    <P class=MsoNormal style="MARGIN: 0in 0in 0pt"
    align=left>
    We are using the Find and Replace funtion in Dreamweaver to
    clean out these commands, but I know from the documentation, there
    is an easier way to clean these pages.
    Bottom Line: Since the pages are dynamically built, I know I
    have to grab the page content and put it in Dreamweaver manually
    and then put it back in DNN, but I am trying to find a way (using
    Regular Expressions or something) to look for all the little
    variances of MSO, <?XML, etc. in a straight shot. I would like
    to find a way to use a wild card to look for all tags that have MSO
    or Microsoft or ?XML in them and then replace them with a null
    value. From what I can tell, the Find would have to use a wildcard
    because the advanced find features don't carry what I am looking
    for. Something like Find \<?xml * [<-wildcard] to \> to
    grab the entire tag. The Find tag command doesn't work because the
    tags I need aren't listed. Also, because the content is dynamic, I
    can't do a Fins and Replace against the entire site for these
    commands, but it would be nice to "Find" all of these items with a
    single pass since the "Replace" value is always null.
    The wildcard syntax and multiple Find instances are the main
    questions. The wildcards seem to be character or space specific.
    Sorry for the long explanation - I just don't want to waste
    anyone's time typing responses to things I've already tried to do.
    Thanks in advance for any help. This is my first time back in
    the forums in about 4 years.

    sadamec1 wrote:
    > Well David, you Findmaster - it worked! (At least it
    found and highlighted the
    > code). Now, I need to dig through what you sent me and
    compare it against my
    > regular expression definitions to find out how to grab
    the rest of these
    > phrases. You're the best. Thank you!
    Glad that it did the trick. Just to help you understand what
    I did,
    there are two main sections, as follows:
    <\?xml[^>]+>
    and
    <[^>]+(?=class=Mso)[^>]+>
    They are separated by a vertical pipe (|), so they simply act
    as
    alternatives.
    The first one searches for <?xml followed by anything
    except a closing
    bracket until it reaches the first closing bracket.
    The second one is more complex. It begins with this:
    <[^>]+
    This simply looks for an opening bracket followed by anything
    other than
    a closing bracket. What makes it more intelligent is the next
    bit:
    (?=class=Mso)
    This does a forward search for "class=Mso". It's then
    followed by this
    again:
    [^>]+>
    That finds anything except a closing bracket followed by a
    closing bracket.
    The bit that you need to experiment with is (?=...). It's
    technically
    called a "forward lookaround". The effect is that the second
    half of the
    regex finds <....class=Mso....>.
    David Powers
    Adobe Community Expert
    Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
    http://foundationphp.com/

  • Multiple Crashes and Printer Issues - Help!

    I've been very disappointed in Snow Leopard. On my iMac it is freezing up constantly. I NEVER have to reboot that iMac, and in less than 48 hours since I've installed it, I've had to reboot 5 times . It looks like iPhoto of all things is the program that crashes it - can't really tell. The whole screen freezes, including the doc and all menu bar options. Nothing is clickable, but the mouse still works - but can't click or right click anything. Have to turn off and then back on again to fix it.
    On my MacBook Pro 17", I have the latest Final Cut Studio installed, and I can't run Final Cut Pro at all!! I need to edit a video tonight, and it crashes every single time I try to do anything in the video - 5 crashes in a row and still counting.
    Finally, none of my HP printers work now - can't print using the same paper options I had before to print pictures. Rosetta has been installed on both machines.
    Is there any help to fix these?!?! I'm seriously considering putting Leopard back on all my machines.

    Your warranty is for one year, so Best Buy should repair it under the warranty assuming there is something that needs repairing.
    You may have a software incompatibility problem at work. You have been experiencing kernel panics so a first start would be to look at a panic log to see what it tells us. We can try diagnosing everything until the problem is tracked down or you can go the extreme route which is to backup your data, erase the drive, and reinstall OS X.
    For the former visit The XLab FAQs and read the FAQ on diagnosing kernel panics. Also seeOS X- How to log a kernel panic. Then post the panic log here so we can see what it tells us.
    I would also suggest you try booting into Safe Mode and see if your computer's problems cease. If they don't then create a new user account. Log out of your account and log into the new account. Do the problems cease?

  • E71 wifi and maps issues.

    Does anyone have this problem and know how to fix it?
    the problem i have is trying to save the maps through wifi (i dont want to use packet data, dont have a plan, although it works and im gonna regret fiddling with it when i get my bill).... it just wont connect in WIFI for maps. i can browse the net, but not download my **bleep** maps!!! and the damn phone keeps refreshing... WHAT THE HELL?!
    this is what i do: options-> tools -> go online.... and i get a message saying that theres no connection and i should do options->tools-> go online to go online..(retard phone)
    so i figured maybe maps needs to be configured.
    so i do options->tools->setttings-> internet  and itll take me back to the main screen of the phone (with the email, text,camera, etc shortcuts)... and it says ' WIFI 1 found'   not connected... how can i connect to wifi without actually going through the 'start browsing' options... kuz as soon as i exit the browser, the phone disconnects.
    it worked for a few seconds earlier on butnot anymore

    Nokia has some software that you can use where you can preload maps onto a memory card (not the phone) so you don't have to use a data connection for maps.  I used a data cable and this software to put maps onto my 4gb card.
    http://www.nokiausa.com/A4686841
    Just a bit of an addition.  Step 4 on that page is the Nokia Map Loader that you use to load the maps onto the phone.  Though you might also download the Nokia Maps application (step 1) for the phone again while you're at it. Just in case you don't have the current version.
    Message Edited by thundertiger on 28-Jan-2009 09:11 PM
    E71-2 Grey Steel
    type: RM-357 code: 0569371 FW: 410.21.010
    08-02-2010 Nokia E71-2 (236.06)

  • Got a apple g4 powerbook 867mhz running slow and few issue help

    i got a powerbook g4 867mhz laptop..
    and i find tat my laptop is running slow
    i try to update the OS on apple site..none of them work
    also i dont have the restore disc lost it somewhere when i move.
    so in this case wat i can do to restore the whole laptop ?
    and wat OS i can install on my laptop? help please

    OS X 10.5 is Leopard, not Tiger. 10.4 is Tiger, 10.3 is Panther, 10.2 is Jaguar. If you have an 867MHz 15" Powerbook, it came with Jaguar (10.2.3) preinstalled, and you can use any later (10.3.x, 10.4.x, or 10.5.x) retail installer disc on it. A grey installer disc that came with any other Mac model won't work; the retail discs are black. Also black are the Upgrade discs (they say "Upgrade" somewhere on their labels). Those require that the previous major OS version be installed, or they won't run. A 10.5 Leopard Upgrade installer requires that 10.4 Tiger is already present on the drive where you're trying to install Leopard. If it isn't, no dice.
    If your friend is running Leopard on his machine, it's a violation of his license for him to let you install it on yours too. So it's just as well the installation doesn't work. You'll need to buy your own operating system.
    Before you do, read the System Requirements for whichever version you want to buy, and make sure your Powerbook meets them. Note that in all cases, the RAM requirement is a bare minimum; performance will be substantially better with more than the required amount of RAM. If your hard drive is the standard 40GB drive for that model, be aware that you should maintain a minimum of 5-8GB of free space on it at all times after Panther or Tiger is installed, or 10-12GB if you install Leopard.
    Panther, Tiger and Leopard System Requirements

  • IMac 07/2010 wifi and HDD issue

    Dear all,
    I purchased an iMac which was delivered on Thursday. it is a 27" i3.
    The HDD seems to make a mild grinding noise, you know, the kinda noise HDDs make when they age a bit...
    Also, the wifi does not stay connected. The signal drops and I cant get it online again unless I restart my mac AND restart my router!! Even this doesn't always work...
    The wifi ONLY works if I keep the hub right next to the mac... not convenient at all!!!
    Any suggestions?

    Yes, call Apple immediately and tell them about your problem, either have them fix it or replace the unit.

Maybe you are looking for