Wifi and iCloud buttons are disabled (iPhone 4s) - please help!

My wifi connection was dropping out intermittently. I read on a post I'd seen previously that I should disable my iCloud function to see if wifi started working again - it didn't.
I re-set to factory settings but because I'm unable to use wifi I am also unable to use icloud to re-set my phone. It's a nightmare.
Any advice would be gratefully received.

Hey there Abdulrahim0259,
I would recommend that you use the following 2 article to help troubleshoot the Wi-Fi and bluetooth issues you are seeing, respectively:
iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
And:
iOS: Troubleshooting Bluetooth connections - Apple Support
Thank you for using Apple Support Communities.
All the very best,
Sterling

Similar Messages

  • My ipod touch 4g camera and sleep button are not working? PLEASE HELP

    So i hadnt used my ipod for about a week and when i used it again it wouldnt turn on. I plugged it in to a wall charger and after a couple minutes the apple logo came up. It turned on but then it didnt say it was charging, the sleep/wake button wasnt working, and the camera wasnt working. it eventually started charging but if you press the sleep button nothing happens and when you open the camera, the shutter stays closed. It was working completely well the last time i had used it. PLEASE HELP What should i do??

    First try a Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
    If no joy... Try a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414
    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    3: If Unable to Restore, try using the Steps in this article to force the device into Recovery Mode.
    Note on Recovery Mode.
    You may need to try this More than Once... Be sure to Follow ALL the Steps...
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • Using Tiscali Webmail with Firefox 6. If I try and delete an email the Ok and Cancel buttons are disabled and nothing happens, have to use F5 to take me back. IE8 works so is this a compatibility issue?

    Using Tiscali Webmail with Firefox 6. If I try and delete an email the Ok and Cancel buttons are disabled and nothing happens, have to use F5 to take me back. IE8 works so is this a compatibility issue?

    It appears OP solved the problem: [/questions/874744]

  • My iPhone recently broke so I was sent a brand new iPhone to replace it, however, since receiving this phone, I cannot access anything which was previously backed up onto iCloud from my last iPhone. Please help me!

    My iPhone recently broke so I was sent a brand new iPhone to replace it, however, since receiving this phone, I cannot access anything which was previously backed up onto iCloud from my last iPhone. Please help me!

    If you are trying to restore to an iCloud backup, this has to be done during the initial setup process.  If your phone is already set up, you will have to go back to Settings>General>Reset and tap Erase All Content & Settings, then go back through the setup screens again and when given the option, choose Restore from iCloud Backup (see image below).  Be sure your phone is connected to wifi and your charger as this will take some time to complete.
    Also, your replacement phone must be running the same iOS version or higher to restore to your backup.  If you are running an older version of iOS than the device that was backed up, your backup will not be visible when you choose to restore to your iCloud backup.  If this is the case, you'll have to update your replacement phone first.

  • Why can't I make a kik account? I have IOS6 and higher and my restrictions are turned off! Please help!

    Why can't I make a kik account? I have IOS6 and higher and my restrictions are turned off! Please help!

    What happens when you try?
    See:
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open
    Contact the developer/go to their support site
    https://kikinteractive.zendesk.com/home
    Restore from backup. See:
    iOS: How to back up
    Restore to factory settings/new iPod

  • In OO Alv toolbar, sum and subsum buttons are disable as default, WHY ?

    i want to enable sum and subsum buttons in alv toolbar. However, as default those buttons are disable. How can i solve ?

    i defined ref_table and ref_field for quantity field in fieldcat  such as  
    ls_fcat-ref_table = 'V03RB'.
    ls_fcat-ref_field = 'KWMENG'.
    so i solve it. thank you for your help.

  • I have an iphone 5 and i just updated it to ios7 and it kept asking for codes and wouldnt accept any and now it just says iphone disconnected.please help

    I have an iphone 5 and i just updated it to ios7 and it kept asking for codes and wouldnt accept any and now it just says iphone disconnected.please help

    Are you attempting to synchronise new or existing photographs between your devices? My Photo Stream can only synchronise new photographs.

  • I transfered my contacts from my iphone 4s to 5s, all contacts have been transfered but they are not displayed completely in my viber contact list. Actually in my viber contact list there are only those contacts who are from iphones! Please help

    I transfered my contacts from my iphone 4s to 5s, all contacts have been transfered but they are not displayed completely in my viber contact list. Actually in my viber contact list there are only those contacts who are from iphones! Please help

    How did you transfer these contacts from one device to the other?

  • My iphone 5s won't turn on after i try the step with pressing the home button and sleep button at same time. Please, help me!

    Guys, i have a problem!
    My iphone 5s was at charging and when i checked him, he had a black screen... I saw some answer about this problem but doesn't work. That step with pressing home button and sleep button at the same time doesn't work and i don't know what else to do. Please, i need your help! Thank You!

    You don't just press the buttons at the same time, you have to hold them down together until you see the Apple logo. This can take 15-30 seconds. If it does not work the first time, connect the device to the charger and try again.

  • I recently bought a second iphone6 but when restored it i found that the person who used it before left his apple icloude id on and now i dont know the password and i cant use my iphone. Please help me..r

    PLease help me...

    What if I purchase a device that is still linked to the previous owner's account?
    Contact the previous owner as soon as possible and ask them to erase the device and remove it from their account.
    Find My iPhone Activation Lock: Removing a device from a previous owner’s account - Apple Support
    There is no alternative solution

  • IPad Internet access when WiFi and Cellular features are disabled

    Local security policies require me to disable all wireless communications on devices operating within specific “Controlled Access” areas.  Is there a specific lightning (cable) adapter I could use to connect an iPad device to a hardwired Ethernet cable (CAT-5 or 6) to facilitate wired internet communications in this situation? Alternately, can I use a standard Lightning-to-USB cable connected to a MacIntosh computer and somehow configure the MacIntosh to act as a router-like device for internet communications between the iPad and other intranet or internet endpoints that the MacIntosh is also able to interact with?  Basically, I need to establish internet connectivity to/from the iPad without the use of wireless communications options, and I'm interested in the options I could pursue. 

    Thanks for the YouTube links bobseufert. 
    I'm going to try this approach out myself (just to verify that it works), but I'm really hoping that another - less encumbered, approach can be found for my end-goal.  The larger-scale view of my need includes connecting multiple iPads (one per workstation area) to a local intranet.  Since I can't use a WiFi or any other wireless communications solution for this installation, I might need a collection of adapter cables and powered USB hubs if I choose to implement the options detailed in these two videos on a large scale.  Sure, that's all possible, but what I'm really hoping to find somewhere is an RJ-45 configured Ethernet-to-Lightning Adapter that will work with iOS devices. 
    From one perspective I can see why this type of adapter has not been built yet.  However when you think about the wired adapter options that are available to connect the iPad/iPhone to a remote display (or overhead projector) - there is at least three different versions available through Apple, even through Apple sells wireless video display capabilities (I own two Apple TV devices myself), you wouldn't think that a wired network option for these mobile devices would be something out of the question...   
    BTW, I noted that Redpark (www.redpark.com) has some serial (RS-232) adapters for the older 30-pin iPads/iPhones and for the newer Lightning equipped iPads/iPhones that Apple has signed-off on.  Redpark also has an RJ-45 to Lighting Adapter, but this particular implementation is built (i.e., wired) for the CISCO Console port, which is not compatible with your typical CAT-5 / CAT-6 wiring configuration. 
    If anyone else finds a Lightning Adapter providing both Ethernet-based Data (via an RJ-45 connector) and Power to keep the iPad devices charged (24/7) I would really like to hear about it...  Thanks for your continued support!  

  • Next , Back , Save for Later and Cancel Buttons are disabled When Creation?

    Dear all ,
    i am facing problem when creation new offer , the buttons Next , Back , Save for Later and Cancel are being disabled when entering the offer basic details , note that i am working on R12 , please i need the solution ASAP ..
    Best Regards

    Which menu path are you using?
    Are the items available for personalization?

  • Approve buttons are disabled in 2nd approver

    Hello,
    I have implemented the N-step approval BADI for BID Invitation just cut&paste from the sample. The issue is Approve, Reject and Hold buttons are disabled in approval screen (saplbbp_bid_inv_300.html)in the 2nd approver. No problem for the 1st approver.
    SRM50(SRMServer5.5) SP5
    Basis 700 SP8
    Any idea ?
    Regards,
    Masa

    Hi Masayuki
    Maintain entries in tcode SWL1
    Maintain Attributes EC_DECISION and EC_MAIL for those tasks that exist within your WF template.
    You can also go through the IMG path. "Dynamic column integrator or something like that". I dont have a system in front of me.....
    Please reward points for helpfull answers
    Sundeep
    Message was edited by: Sundeep Ravande
    Message was edited by: Sundeep Ravande

  • I did the software update ios 7 and now i cant hardly get wifi and my calls are being dropped.

    I did the software update ios 7 and now i cant hardly get wifi and my calls are being dropped.Can anyone help me?

    I updated my ipad to the ios7.4 and my wifi connection just wouldn't work any longer.

  • My iPad 1 apps keeps crashing. I have closed all running background apps,reset by holding power and home buttons but nothing works. Please its starting to get very frustrating and annoying.

    My iPad 1 apps keeps crashing. I have closed all running background apps,reset by holding power and home buttons but nothing works. Please help its starting to get very frustrating and annoying.

    What exactly do you mean by "crashing" and is it occuring on a specific app or under specific circumstances?

Maybe you are looking for