Wifi and incoming calls

Can I use the wifi hotspot and still make/receive calls on my Droid?

PJNC284 wrote:
You can talk and surf at the same time over both 4G and 3G with the Thunderbolt
They are using the phone as a hotspot, so the phone is actually using data, which in turn would not work when on a call.

Similar Messages

I've installed ios 7.0.6 on my iphone 4 and lost voice on outgoing and incoming calls. My simm is ok, i've checked it, I've done a full clean and restore. Still no calls. Please help.

Hi there,
I've just installed ios 7.0.6 on my iphone 4 and now lost voice on outgoing and incoming calls.It rings on incoming and I'm told rings on the recipient's 'phone, but then no vocal communication...its just dead. My simm is ok, i've checked it, I've done a full clean and restore of the 'phone. Still no calls.
I've not caused any physical or water damage to the 'phone. I would welcome any help/suggestions to get my calls back asap.
Please help.
Miss liberty

Have you tried restarting or resetting your iPhone?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
Also consider deleting and reinstalling the Mail Account in question.

I did the software update ios 7 and now i cant hardly get wifi and my calls are being dropped.

I did the software update ios 7 and now i cant hardly get wifi and my calls are being dropped.Can anyone help me?

I updated my ipad to the ios7.4 and my wifi connection just wouldn't work any longer.

Droid 2 Global Issues - notif. bar and incoming calls

Ok, I've had my Droid 2 Global for about a year now, and for the most part it has been fine. However, on the latest couple of updates, some really annoying "features" have come up. On the current update, the notification bar disappears randomly. Not known cause. Also, if the notification bar disappears, when I receive and incoming call, it doesn't display the "answer call" screen, showing the contact. This makes it difficult to answer the call, especially when the screen is locked. I have to go unlock the screen, and go to a screen like I'm going to call someone, and THEN I can see who is calling and maybe answer. If it hasn't gone to VM already. This is really stupid - first and foremost, this thing is a FREAKING PHONE. I should be able to answer a call.
Frustrated. Any ideas/help?
Thanks,
-Dirv
Details
=============
System version: 4.5.629.A956.Verizon.en.US
Android version: 2.3.4
Kernel version: 2.6.32.9-g177d714 mcbk83@il93lnxdroid01 #1
Build number: 4.5.1_57_D2GA-59

Ok, I've had my Droid 2 Global for about a year now, and for the most part it has been fine. However, on the latest couple of updates, some really annoying "features" have come up. On the current update, the notification bar disappears randomly. Not known cause. Also, if the notification bar disappears, when I receive and incoming call, it doesn't display the "answer call" screen, showing the contact. This makes it difficult to answer the call, especially when the screen is locked. I have to go unlock the screen, and go to a screen like I'm going to call someone, and THEN I can see who is calling and maybe answer. If it hasn't gone to VM already. This is really stupid - first and foremost, this thing is a FREAKING PHONE. I should be able to answer a call.
Frustrated. Any ideas/help?
Thanks,
-Dirv
Details
=============
System version: 4.5.629.A956.Verizon.en.US
Android version: 2.3.4
Kernel version: 2.6.32.9-g177d714 mcbk83@il93lnxdroid01 #1
Build number: 4.5.1_57_D2GA-59

I can't hear the outgoing and incoming calls but I can hear the ringer and I was able to call using viber in my iphone 4s 16gb.

I can't hear the outgoing and incoming calls but I can hear the ringer and I was able to call using viber in my iphone 4s 16gb.

Hello sadiepix,
The following article details several things that can be done to quell iTunes' constant need for authorization.
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
Cheers,
Allen

When I have my handsfree plugged in, the sms-tone and incoming-call ringtone is only played in my earpluggs. Any suggestions anyone?

When I have my handsfree plugged in, the sms-tone and incoming-call ringtone is only played in my earpluggs. Any suggestions anyone?

I experience the same problem and it's extremely annoying. Have you found a solution yet?
Of course one might want to keep the earphones plugged in most of the time (if this is the way you prefer to answer you calls + talk on the phone) even if you're not using the phone/earphones. The ringtone does come through to to the speaker when someone calls… yet the sms signal DOES NOT and only plays in the earphones.
This means that the earphones must be unplugged after every call and then plugged in again before every call in order not to miss any sms:es! (Talk about unsafe driving e.g.!)
It would seem to be such an obvious setting/option to include in the iPhones settings. Why has Apple has completely missed this!? .... or is there a solution?
I have searched the internet but haven't found a solution?

Why are my Text Contacts and incoming calls only are showing as "Message Received"

All of my text contacts messages just say "Message Received", but if I have set a ringtone for them, that is the ringtone that plays. The same is true of incoming calls, It will show the phone number, but not the assigned name. I don't know everyone's phone number! I barely remember mine!
HELP?? Please ?!
How do I get my caller ID to work properly again?
I have a Galaxy S3
Thanks

Hey there, celtmaidn! Thank you for bringing this matter to the community. I'm sorry that your Caller ID isn't providing you with the details you need, but I'm happy to help. If I understand correctly, incoming calls and messages do not display the name of any of your calls or messages, just the number. Does the same occur on your outbound calls and/or messages? Also, you may have a contact (example: Dave) that you have programmed in your S III with a mobile number, but "Dave" may have a home number as well. Have you confirmed that the number used for that call or message is the same one you have programmed into your device?
DionM_VZW
Follow us on Twitter www.twitter.com/vzwsupport

Can´t ear and incoming call that is transfer

Hi I´m using the SPA9000 and SPA400 together with Polycom 301, 501 and 320 phones.
The SPA9000 works great when I transfer an incoming call from SPA400 to the analog FXS ports of the SPA9000 but when I pickup the call and try to transfer the call to an IP phone I can´t ear the person who call although he can ear me.
Other thing I want to know is how to set a pickup group for the incoming call and how to pickup the calls?
Sincerely,
Jose H

Tap the power button once to silence the ringing, twice to send to voicemail.

Telephone numbers and incoming calls

Do I need to have a telephone number in order to receive incoming calls? If not, how would anyone call me? What number would they use?

Hi Sagar,
I don't think you'd be able to monitor calls from a website but you could build a system that monitors calls and submits that data to a site using for example, http.
It's difficult to point you in a direction without more information, specifically about the phone system hardware. Many phone systems come with an api that allows you to interact with it. Which system will you be using?

Linksys SPA3102 "flashing" and incoming call problem.

I tried to do as much research as I could before posting, however i'm stuck =/.
My Setup:
Phone Port on wall Split into three phone ports, one with a fax in it, one with a splitter, one empty.
From the splitter I have a line into a D-link modem and a line into the back of the SPA3102.
From the D-Link modem i have an ethernet cable plugged into the SPA3102 [im not using the inbuilt modem, should i be ?]
Also from the D-link modem i have a D-link wireless router.
Then I have a line into a set of Telstra V900 cordless phones from the SPA3102.
I also have another phone connected directly to the PSTN line in another room.
The problem is when a call is coming in on the PSTN line the phone connected directly to the PSTN line rings however the phones connected to through the SPA3102 don't register the call until much after the PSTN phone does. I'm not sure how to go about fixing that.
Also should I pick up on the wired PSTN handset, how do I go about switching to the wireless handset. "flashing" i think it's called.
NOTE: I'm in the market for new wireless phones anyway as the telstra V900 ones are crap, any recmomendations ?
Any help would be appreciated.

First I didn’t understand what you meant for “I’m not using the inbuilt modem” for the SPA-3102. Did you mean you set the SPA-3102 as a bridged?
If you are using a phone splitter where one of the 3 phone ports is connected to the PSTN portion of the SPA-3102 and the other phone splitter port is into another phone and someone calls the PSTN line, the phone connected to the splitter will really ring for it gets a share of the signal coming from the splitter. The phone connected to the phone port (FXS) port for the SPA-3102 will ring only if the PSTN signal has successfully transferred the call to the from the PSTN line registration to the actual Line 1 registration. If that is not happening, there are some registration settings you need to check in the SPA-3102. One important parameter is the registration status of the Line 1 and PSTN lines. You can check that under the Info section just make sure you are login as admin advanced login with the SPA-3102. You should be getting registration state “registered” confirming that the VoIP information you set in the SPA-3102 is valid. If registrations are correct, maybe you need to know is the PSTN Line is transferring the call to the VoIP line section. Setting up this portion is discussed in this link:
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=5159&p_created=11686...
Hope this helps.

Can you listen to music over wifi and receive calls

I listen to Rhapsody over wifi (iTunes has same problem) and can't receive phone calls. I have a iPhone 5 if it makes any difference. How do I set up the phone so the calls pop up when they come in and don't go to voicemail? There has to be a way so no matter what app you're in the call show when the come in. I suspect it's the wifi that is causing the phone not o come in.

I have a very limited data plan, so I tend to turn it off until I need it. I looked my Airplane mode is "off".
I have a signal because I tried calling it from my work land line and it rang fine... as long as I was listening to Rhapsody or Itunes over WiFi.
I looked at the phone and call forwarding is not on... service is through AT&T. The only thing on is Data Assist and call waiting.
Any other suggestions on what to do?

Out going and incomming calls callers cannot hear me but i can hear them

if some one calls me i can hear them and when i make out going calls i can hear the person but they cannot hear me

http://support.apple.com/kb/TS2802

Why doesn't my phone make any noises at all anymore, that includes music ,siri, and incoming calls???

I've gone to settings-sounds-Lock sounds and turned it on and tried it. I also tried to clean out all the port holes in the phone, and I have also messed with the side button to turn the volume up and down. Help me out Please!!!!!

cgoehner wrote:
I've gone to settings-sounds-Lock sounds and turned it on and tried it. I also tried to clean out all the port holes in the phone, and I have also messed with the side button to turn the volume up and down. Help me out Please!!!!!
You didn't mention the Mute switch above the volume buttons on the side.

Display both company AND name in contacts, incoming calls, messages, etc

Is there no way to have both a person's full name, AND company appear on the display of contacts and incoming calls??
I have over 2,000 contacts in my address book, many from the same company, and many with the same (or similar) names.
When someone with a very common name calls or texts, it's impossible for me to remember who they are without listing their company as well. If I have both Sam Michaels and Samantha Mitchells in my address book, sometimes the only way to distinguish between the two is knowing that Sam works for Viacom and Samantha works for Universal.
I've heard that the only way to do this is to include the company name in the person's main "name" field. This is problematic because A) it would take me a million years to go through and personally edit all of my 2k+ contacts, and B) this is completely counter-intuitive of having the company/office/job title lines available as fields in the address book in the first place.
Does anyone know a way around this at all?? Apple really needs to find a way to fix this, as it's super inconvenient for business professionals. This is just another one of my many frustrations with Apple products being not intuitive for workers in the corporate world.

I'm not aware of a way to do this, however I'm certain that when my phone rings, it shows the person's name and company information that I have written in contacts. I've not taken time to check lately, but that seems to be the case for contacts that have a company name in them. Ones that do not have a company name show the person's name and then the label for the phone number they are using, such as home, work, mobile, etc.
Otherwise, feedback to Apple goes HERE, and then just click on the appropriate subject.

C6 Incmoing calls and Incoming messages

I have bought a new C6 from India but I am currently based in New Zealand. I noticed an issue around unable to see name of the person for incoming calls and name of the person for incoming messages based on certain combinations of how I store the number.
If I store local new Zealand mobile numbers without '+64' and save it directly as 02XXXXXXXX (typical mobile numbers), I am able to see incoming calls with the name of the person on the display. But for the incoming messages from such contacts are displayed without name of the person.
So i tried to store the contact numbers with '+64' prefix, for example +642XXXXXXXX. In this case now I am able to see now incoming messages being identified with the name of the person. But now incoming calls from such contacts are now displayed without name and are displayed as numbers like 02XXXXXXXX.
I tried to find solutions and similar issues if encountered but these links didn't help.
/t5/Pool-of-Knowledge/Missing-Caller-ID-on-Calls-SMS/td-p/371913
/t5/Cseries/C6-and-incoming-calls/m-p/967053#M15406
Would be very glad to get a solution to the mentioned problem.

http://www.nokia.co.in/support/search?comp=Nokia+C6-00&qt=C6+incoming&cnt=1&page=6&cat=support&fullc...
Event the mentioned link didn't help.
Like first two points are not valid. But for the third point though I have make the changes as advised then I will not be able to identify from whom I have received the messages. If I edit contacts so as to identify messages then also it will not help as I will not be able to identify incoming calls by name.
Please help.

Wifi and incoming calls

Similar Messages

Maybe you are looking for