Wifi and internet sharing glicth

Hi folks, it seems I found a bug on Lion 10.7.3 regarding the internet sharing and the wifi.
I activated the internet sharing through the wifi, everytihng worked properly, and put the computer in sleep mode. When I got back to it awaking, the internet sharing was still on so I deactived it but the wifi didn't switch back to the normal wireless mode. In other words it was stuck in "sharing". The only way to resolve this issue is activating/deactivating the intenet sharing combining the switching on/off of the wifi and modifing the source of the internet connection. A mess in other words. And this happens all the time I put in sleep mode the MBP.
Any ideas to solve this bug?

Confirmed. I have the same problem on the same model MBP and the same OS version.
I had to completely reboot the machine to clear it out. Very frustrating. Anybody out there with an idea?

Similar Messages

  • HT4623 why does my ipad kick me out of FB and sometimes to the 'settings' page or sometimes to the desk top, for what reason?     I have 50.8 GB of capacity available; it is version 5.1.1 and model MC497LL.   it is WIFI and internet via AT&T???  Can you h

    Can anyone help me?  Why does my ipad kick me out of FB?  Sometimes to the 'settings' page and sometimes to the desk top?  I would like to know why this happens and what I can check or change to make it stop.   I have 50.8 GB of capacity available; it is version IOS 5.1.1; model MC497LL.  It is WIFI and internet via AT&T?   Can anyone give me some clues on what to do; or change in settings???  Thank you very much! 

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Error message about firewall and internet sharing

    hello all i have a question regarding the use of firewall and internet sharing.
    I have a PMG5 connected to internet through Airport. I've linked an Xbox 360 via the built-in ethernet port in order to access Xbox Live. I had to open specific UDP ports on the OS X firewall but it now works fine. However, in the Sharing Preference Pane, Internet Tab, i still get an error message saying that my Internet Sharing is disturbed by the settings of the firewall and sharing services, it says that i did not activate "personal web sharing" in the first two tabs...but i DID ! And there's no way to get rid of this error message.
    I know I know some may consider it's not a real problem because it's just an error message while the connection actually works fine but well, I tend to hate error messages when they're not supposed to show up. So if anyone know the answer, thanks in advance...
    Good day to everyone
    Vince, Paris...

    sorry about the delay in replying, was kinda busy
    well trashing the pref files was useless and i tried with another user, same thing. As for the second opinion, the problem was not about which port was used cause as i said the connection sharing works fine and anyway it was the correct port that was checked, it's just that i get an error message while there is no apparent error and everything works fine, i'm told that personal web sharing is not enabled but it is...
    Anyway as i said, it's probably not a real matter, as long as it works...which brings me to another thing. I've created a special protocol in the firewall to enable a proper dialog with the xbox. it's basically the same thing you do for ichat AV when you have video connection problems, you track down the concerned UDP port using terminal, you allow traffic and all... The protocol for the xbox worked great for some days, but now it seems it's not enough, the game set keeps trying on another port and i constantly have to update the protocol or deactivate the firewall...and enabling back all UDP traffic is not enough to solve it.
    In a way i think everything is linked, the initial error message when everything was fine and the current trouble. Any idea?
    thanks
    Vince

  • Help with LTE and Internet Sharing for BUIlD Lumia...

    Nokia,
    I received the Lumia 920 when I was at BUILD 2 weeks ago. I followed the instructions and the phone mostly works on AT&T. I had a 900 so I assumed my LTE and Internet Sharing plan would easily transfer. Unfortunately that does not seem to be the case. I called AT&T gave them my IMEI number but it's not in their system and is not recognized as a Lumia 920. Because this is not an "AT&T phone" they wouldn't do much more to help. My data connection only ever shows 4G, never LTE as my 900 does and I cannot enable Internet Sharing even though it's on my data plan. I believe this is all controlled by the IMEI number.
    Is there anything Nokia can do to help us? I can't imagine I'm the only one having this problem! I'm going to try again to see if I can get the issue escalated and maybe they can force the IMEI number to be recognized as a 920.
    Thanks!

    Sorry I never came back to update. The fix, as has been noted already, is to make sure AT&T has your IMEI as another 920 or your old 900 so that you get LTE (which appears as "4G"). Then, in the Nokia Access Point config setting (under System Config), make sure LTE2 is selected, then install an additional keyboard (I tried both Spanish and Chinese). This will force an OTA update that seems to enable Internet Sharing. I had to redo it a second time when I updated my Nokia Access Point app last week, but I just re-installed a NEW keyboard and got Internet Sharing back. It hasn't gone away since, contrary to what others have experienced. For more info (and where I found the fix) see this XDA thread: http://forum.xda-developers.com/showthread.php?t=1971997

  • Airport and internet sharing turns off by itself

    Hi everyone, I have an imac that I purchased earlier this year, and I use internet sharing to get internet for my ipod touch. Until a few months ago, this worked fine but now airport and internet sharing turn off every time I restart the computer and I have to turn both back on every time. Is anyone else experiencing this problem or know hot to fix it?

    Hi and Welcome to Apple Discussions...
    Download and install the v10.5.8 combo update available here.
    http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
    One of the "fixes" includes: - compatibility and reliability issues when joining AirPort networks.
    After the installation, repair disk permissions.
    Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
    Carolyn

  • HT204053 My wife and I shared the same AppleID but want to break these apart. We set up a new AppleID for her but can't get this changed on the phone. How do we switch her AppleID default on her iphone 4?

    My wife and I shared the same AppleID but now want to break these apart into separate accounts. I have set up a new appleid for her and also set up on line. However, I can't figure out how to change this on her iphone4. I have looked at all of the General settings but need guidance. When I use the phone to try to purchase songs from itunes, it reverts to the old appleID. 
    Any suggestions?

    Welcome to the Apple Community.
    In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
    Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
    In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
    In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > store, scroll down and tap your ID)

  • OSX 10.6.8 and Internet Sharing to Ethernet

    I am trying to set up Internet Sharing so that I can connect my old MacBook Pro running 10.6.8 via ethernet to another device - I'm trying with xbox360 and Sony Blu Ray (BPD-S185) (for diversity of devices - I used to have it working on my xbox, but really want it working with the blu ray player but the network status feedback is better for problem solving on the xbox!).
    I have my MBP connected to my home network over Airport which has the following details:
    - IP: 192.168.1.5
    - Router IP: 192.168.1.1
    I have then enabled Internet Sharing through System Preferences to share my Airport connection to my Ethernet connection.
    I have the following Ethernet settings:
    - Configure IPv4: Using DHCP with manual address
    - (Ethernet) IP address: 192.168.2.1
    - Subnet Mask: (blank - not user accessable, changes to 255.255.255.0 when xbox turned on)
    - Router: (blank - not user accessable)
    - DNS Server: 192.168.1.1
    - Search Domains: (left blank)
    On the xbox I've set the network settings to:
    - IP: 192.168.2.2
    - Subnet: 255.255.255.0
    - Gateway: 192.168.2.1
    - Primary DNS: 192.168.1.1
    - Secondary DNS: 192.168.2.1
    When I then select 'Test my Xbox Live Connection'  it takes a while, the Network status shows 'Connected', however The Internet Failed.  I am informed that the 'Test Failed' and 'more information' tells me I have an 'Internet Error' with the following Status codes:
    W: 0000-000B
    X: 0000-000D
    Y: 0000-0000
    Z: 0000-0000
    ID0004-000
    L: 0015-10F1
    Q: 8007-0435
    T: Wired
    A: 192.168.2.2/255.255.255.0
    G: 192.168.2.1
    D: 192.168.1.1/192.168.2.1
    So, it looks as though the problem lies with the MBP and internet sharing on OSX.  I have extra suspicions that this is the problem, as connecting my Blu Ray player to my MBP via ethernet I also get a successful connection to the network, but no internet access.
    Pleeeeease can someone help?!?!  This is driving me nuts - a couple of years ago I had internet sharing working to let my xbox connect to the internet, so what's happened in the last few years to mean this won't work?

    If you want to back it up there, use the Disk Utility to create a disk image of it.
    If you want to import its contents to iMovie, iTunes, or elsewhere, use MPEG Streamclip and Apple's MPEG-2 playback component to convert the VOB files on it to a different format.
    (65437)

  • HT5622 My wife and I shared an Apple ID, have closed out iTunes on her iPhone and iPad but will not allow her email address to be associated with a new account even though it does not appear anywhere in my information. Any suggestions.

    My wife and I shared an Apple ID, I have closed out the iTunes on her iPhone and her iPad. While trying to set up a new iTunes account when I enter her email address it says we have to select a new email address. I have checked and her email is not associated with my iTunes account and really do not want to establish another email account. Any suggestions?

    Hi Stateler74,
    Thanks for using Apple Support Communities.  You might be able to find the Apple ID that her email address is associated with by following this article's instructions:
    Apple ID: Finding your Apple ID
    http://support.apple.com/kb/HT5625
    Cheers,
    - Ari

  • HT1433 Hi, my internet sharing was working perfectly in 10.6.8, sharing my vpn connection to my apple tv with no problems. I then upgraded to 10.7 etc and internet sharing stopped. I have since reverted my computer back to 10.6.8 but no luck still, though

    Hi, my internet sharing was working perfectly in 10.6.8, sharing my vpn connection to my apple tv with no problems. I then upgraded to 10.7 etc and internet sharing stopped. I have since reverted my computer back to 10.6.8 but no luck still, thoughts?

    Hi, my internet sharing was working perfectly in 10.6.8, sharing my vpn connection to my apple tv with no problems. I then upgraded to 10.7 etc and internet sharing stopped. I have since reverted my computer back to 10.6.8 but no luck still, thoughts?

  • Recently bought a Pro. At home, It connects to my wifi, and internet, just fine. On the road, It will connect to wifi sites, but will NOT connect to internet. Other devices connect okay

    Recently bought a Pro. At home, it connects to wifi and internet just fine. On the road, it connects to wifi sites, but willl NOT connect to the internet, while Other devices, iPad2 and iPhone connect and browse just fine.

    this is Mac Pro forum
    You want the notebook forum: MacBOOK Pro
    https://discussions.apple.com/community/notebooks/macbook_pro

  • Just bought a 3TB Time Capsule for a small office. Will have 4 users with MacBooks. What would ne the best setup for time machine individual backups and internet sharing in a secure way?

    Just bought a 3TB Time Capsule for a small office. Will have 4 users with MacBooks. What would ne the best setup for time machine individual backups and internet sharing in a secure way?

    Set up each Mac for Time Machine backups in the normal way.  Time Machine will keep each backup separate on the Time Capsule, so users will only be able to see the backups of their own Mac.
    Yes....there are convoluted workarounds that might allow one user to see the backups of another.....IF...they know the administrator password of the "other" Mac.
    As far as Internet sharing, all users will have access to the Internet if they have a wired or wireless connection. If a Mac connects using wireless, it is possible to limit the time that they are allowed to connect to the network.
    For example, you might limit the ability to connect to the wireless from say each Weekday from 8 AM to 6 PM.
    With a wired Ethernet connection, you cannot limit access times to the Internet.

  • Open DNS and internet sharing

    I am seeing strange behavior, and wondering if anyone has a thought about what is going on.
    I am at a hotel with fast internet service over ethernet, but, for whatever reason, DNS seems very slow if I use DHCP to connect (timeouts of 5-10 secs to get to a new site). If I switch to DHCP with fixed DNS, and use the Open DNS servers (208.67.222.222, 208.67.220.220) the latency issues go away.
    The interesting thing is that I am sharing the internet connection over Airport to my wife's computer (she connecting thru DHCP). If I use a fixed DNS for MY computer, then her computer cannot connect thru internet sharing. But if I use the (slow) DHCP connection, then she can connect through mine. I have not tried setting up her computer with a fixed DNS, as she really doesn't like me to change settings on her computer
    Is this a known limitation of internet sharing, or is there something I should know?
    TIA

    In more detail, if my ethernet (the computer that is doing the sharing), is set up with Configure: Using DHCP, and DNS Server: 208.67.222.222, 208.67.220.220 (in Network Panel for Ethernet), then the computer connecting thru Internet Sharing in Sharing Panel is not able to access some or all resources thru http (ie, pages fail to load, or do not fully load).
    However, if I clear the DNS Server part in the Network Panel, thereby using the the DNS Servers supplied by the hotel, then my computer's connection to the internet is slower, with long waits (presumably due to a slow DNS server), but computers accessing the internet via Airport thru my shared connection are able to browse the internet successfully.
    I suspect that when I have a fixed DNS server in my computer, that fact is not broadcast to computers using the shared connection. But I am not an expert in TCP/IP, and may well be confused about how DHCP, DNS, and Apple's Internet Sharing work together.
    Thanks for any ideas you have
    A

  • Remote App and Internet Sharing Problem

    Ok so basically heres the setup we have, we have one of the recent iMacs, a Macbook, and 3 PC's, one running XP and the other 2 Vista. All of these computers are on a network together. All our music is on one of the Vista PC's, called "SERVER". This PC is connected to the speaker system, so is what we use for music.
    Now I've been trying to use an iPod Touch we have (most recent firmware 2.2, and most recent Remote app version.) and the remote app to control the itunes on this PC. This is not an issue when the iPod is connected to the Wifi the router itself provides (its one of those wireless routers), but when I switch the Wifi the iPod is using to the Wifi provided by the iMac using internet sharing, it suddenly can't find the library anymore. Internet (safari) still works fine from the ipod when connected to this Wifi point.
    My guess is that because the iMac using internet sharing seems to act more like a router than a wireless access point (allocating its own IP adresses ect..), the iPod thinks its on a different wireless network, and thus cant see the itunes library. Obviously the iMac is connected to the router directly by ethernet, if I hadnt mentioned that.
    So, my question is, can I fix this ?
    Is there any way to make the internet sharing mac behave like a wireless access point and not like a router ?
    Help would be much appreciated.
    Thankyou.

    asuming you mean internet sharing as in you connect adhoc to 1 computer using wifi and the rest of the network is wired
    problems is the middle name of adhoc wifi though cause everybody problems imho
    and wifi routers are soo cheap most people don't bother
    even if internet sharing is used remote app should still work if not connecting adhoc at least it's working for me right now
    with a setup of many computers 1 wifi router
    1 computer sharing internet using an usb 3g modem
    remote app works with all my computers and my appletv

  • USB modem and Internet Sharing causes system to hang.

    First my setup. I have a Mac mini (early 2009) running 10.7.2 connected to the Internet using a Sony Ericsson W910 as a USB modem. I am using Internet sharing via Ethernet to a 1st generation (n) AirPort Extreme to give Wi-Fi to other devices (iPhone, Xbox 360, PS3 etc).
    Now the problem: When Internet Sharing is on regardless of what interfaces are used (Ethernet, Wi-Fi, Bluetooth PAN etc) eventually—that word is key—my system will hang. Internet will be unavailable to every device and my Mac itself (but they will still be connected to Wi-Fi) and any app that is running willbeachball. Any app I launch—or try to—will also beachball. I've tried leaving it to see if it will resolve itself —even overnight—but it always requires a hard reset.
    The eventually part. I haven't figured out what causes this but I have an idea which I'll explain later. The times this happens is totally random. It has gone days with  no problems and other times has happened minutes apart. Usually it's about every 12-24 hours.
    It's definitely Internet Sharing which is causing this because when I turn it off I don't have any problems. I've tried every configuration. Only sharing via my mini's Wi-Fi or Ethernet, leaving the AirPort out etc. As soon as I turn on Internet Sharing I've started a countdown to a hang.
    On inspecting the Console the last messages before a hang without fail are always:
    12/12/2011 06:31:07.000 kernel: 80       80 AppleUSBCDCECMData: getOutputBuffer - Output buffer pool empty
    12/12/2011 06:31:07.000 kernel: 80       66 AppleUSBCDCECMData: USBTransmitPacket - Output buffer unavailable
    12/12/2011 06:58:58.312 com.apple.usbmuxd: _handle_timer Fish out of water!!!
    Repeated hundreds of times. Quick Googling indicates that AppleUSBCDCECMData is a USB driver. Apparently I have version 4.1.15 which appears to be the latest.
    I'm aware this is a rare configuration but I believe it affects every USB not just this particular phone.
    Is anybody else experiencing this or knows a way to fix it?
    Thanks.

    Thanks Barry.
    The hub is on its way to the manufacturer for after sales service...
    But the issue with AirPort remains the same, even after resetting SMC.
    Some clarification:
    * It happens just after computer wakes up from sleep. Restarting solves the problem and the issue doesn't arise until computer goes standby again.
    * The whole WiFi card becomes unresponsive. It is not only the Turn Off button, but the whole functionality is stopped. The card can not be activated/deactivated and it doesn't connect to any network. If it is used for internet sharing, clients are unable to connect.

  • USB hub and internet sharing stop working after sleep

    Hi,
    I have a relatively new Bluestork USB hub I purchased to connect multiple USB devices I have at the same time. It used to work correctly under Leopard, but now it stops working each time the computer wakes up from sleep. I have to restart the computer for it to start working again. Both link and power LEDs stay on, even when the hub is not recognized.
    My second problem is related to internet sharing. It stops working after each sleep/wakeup cycle and the only way to make it work again is to restart the computer. It used to work correctly before Snow Leopard as well.
    I have all the Mac updates installed.

    Thanks Barry.
    The hub is on its way to the manufacturer for after sales service...
    But the issue with AirPort remains the same, even after resetting SMC.
    Some clarification:
    * It happens just after computer wakes up from sleep. Restarting solves the problem and the issue doesn't arise until computer goes standby again.
    * The whole WiFi card becomes unresponsive. It is not only the Turn Off button, but the whole functionality is stopped. The card can not be activated/deactivated and it doesn't connect to any network. If it is used for internet sharing, clients are unable to connect.

Maybe you are looking for

  • At line selection in alv report

    hi, i had developed a code in which at 1st execution the normal output is displayed and if i click on a purticular Itemid it displays the whole of items  and i want to display only that item's data which i had clicked on. following is the code which

  • HTML in SQL for tabular form

    I am trying to use HTML directly in SQL statement for tabular form (see SQL below). When the tabular form runs it is not converting the HTML so it displays as this: Manala<span style="color:blue;">pan</span> Am I missing something? select "PK_ID", "C

  • Trying to use code found in working PDF from online in LC. (Keystroke Event)

    I found a PDF online (at http://www.planetpdf.com/developer/article.asp?ContentID=javascript_dynamic_updates_w) that works on my iPad running PDF Expert for iPad 5.0.4. I tried to recreate it in LiveCycle ES4 using the same code. However, the author

  • Producer/Consumer-QSM

    Hi, This VI performs a instrument control. Some parameters need to be adjusted while VI is running. Producer/Comsumer design pattern is used to implement it. The producer catches the events of value change of parameters. The comsumer goes to correspo

  • Can't Access Certain Website in either Safari or Firefox.

    FYI, I have a G5 Power PC, 1.8 GHZ, operating Mac OS 10.5.4. My internet connectivity is wireless via Airport Extreme through Comcast modem. I have been unable to connect to Microsoft Office download page for updates. When attempting to connect using