Wifi and IPhone 3GS

Hello,
Is the WiFi (wireless home network) reception quality
from the 3GS remarkably better compared with the 3G ?
Thank you for any comment ...
Berny +

Hello,
Finaly i discovered following issue :
My problem is the chipset X58 from my Asus Rampage II Extreme
Everyting in running fine _one time_ when uninstalling/reinstalling the Intel driver.
However (dramaticly) nothing works any more after system reboot ....
Same behaviour with differents iphones from friends ....
PLEASE HELP !!!!!!!
Berny +

Similar Messages

  • New HH3 - Issues with Kodak Printer and iPhone 3GS

    Hello,
    Here is the background:
    Previously had a D-Link DSL-G624M router and everything connected wirelessly. This included 2 laptops, Kodak ESP 5250 Printer and iPhone 3GS. Router broadcasting on channel 6 (locked).
    Since upgrading to Infinity replaced the D-Link with a HH3. Laptops connect fine but have issues with other wireless devices.
    iPhone: Seems to lose internet (not necessarily wireless connection though) intermittently. The phone remains connected to the HH3 and can be seen in the DHCP table and Home Network screens. The iPhone also reports that it is connected to the HH3. However, when attempting to access the internet using either Safari or apps it doesn't work. This can be fixed by forgetting the network and re-joining or turning Airplane Mode on and then off.
    Kodak ESP5250 Printer: This connects fine to the HH3 and remains in the DHCP table and Home Network with the correct IP Address. Laptop A is able to connect and print successfully. However, after putting the laptop into sleep mode and re-waking it it is unable to Print. The Printer is still connected to the HH3 and laptop claims it is 'Ready' but unable to print. The only way i have found to fix this is to re-install the entire Printer software!! However, Laptop B does not have this problem and can be put into Sleep mode, Hibernate or restart and the printer remain connected. I do not think it is a firewall issue as able to connect until re-waking from sleep.
    You're probably thinking the same as me that this sounds like hardware issues and not the HH3. Maybe coincidence that it started happening after changing to HH3. Maybe something wrong with the iPhone or Laptop A and/or Printer?!? Tried setting a manual channel on the HH3 as suggested by other posts but this had no effect. (Used inSSIDer to determine best channel). Also increased the IP Address lease time from 1 Day to 21 Days - but again no difference.
    Current situation: Connected the D-Link router to the HH3 using Ethernet cable. Disabled DHCP and DNS on the D-Link router and kept SSID different. Now connected all devices to the D-Link router and nothing to the HH3 and everything is working as it did previously. The iPhone remains stable and the Kodak printer remains connected to both Laptops after re-waking from Sleep Mode.
    I haven't yet contacted BT but i'm leaning towards it being a dodgy HH3. Anyone have any suggestions??
    Thanks,
    Martyn...

    For starters, there's nothing wrong with your Iphone or Kodak prn. The issue is the HH3
    I had a very similar issue connecting iMac, iPad, Macbook Pro, iPhone, Thinkpad and Canon prn via wireless to the HH3... Lots of disconnections, devices that couldn't log in, very low wireless speeds, printer not recognized, etc,etc
    I went mad, pretty much did the same things as you did: inSSIDer, changing channels, re-installing whole softw drv !, reorientating HH3 position, manually assigning IPs and channels... nothing would seem to work!
    Then I connected a Netgear router to HH3 via ethernet cable -like you did- and suddenly everything seemed to go back to normal. Here's what I found out after much head knocking:
    1) The issue is the HH3, not that it's faulty but simply put it can't deal with lots of wireless traffic. The minute you connect several devices it gets clogged up
    2) HH3 seem not to recognize WiFI printers that have a 'static' IP (not sure why)...  this was a nightmare
    3) if you have many devices connected, HH3 doesn't  seem to 'like' Apple devices or wifi Airport powered (not sure why). After sleep mode these device can't pick up IP over the air, and you need to manually renew DHCP leases. There are several reports about this in Apple forums.
    So here's what I did:
    1) I ditched the HH3
    2) I connected the Openreach router to a dual-band Netgear wndr3400 **cable** router (PPPoE connection)
    3) I re-installed the prn drv in USB mode and then added wifi printer in wifi mode while usb connected
    4) I created two-split WIFI networks; one in the channel 6/2.4Ghz frequency and another in the channels 44-48/5Ghz freq to which I assigned most devices (It seems BT Infinity wifi works best in 5Ghz channels)
    Results: all devices recognised & connected via WiFI, no disconnections, steady WIFI speed almost as fast as ethernet cable, wifi prn prints fine from all devices... No more WIFI connnectivity issues.
    I hope this helps, good luck
    (note: my current issue is that my profile dropped from 34/8 to 21/2 during testing phase)

  • HT4539 i have same apple id for ipod touch 4g and iphone 3gs so,actually i have lost the iphone 3gs so can i track the iphone location, or with the imei number something possible could happen plzzzz do reply

    i have same apple id for ipod touch 4g and iphone 3gs so,actually i have lost the iphone 3gs so can i track the iphone location, or with the imei number something possible could happen plzzzz do reply

    - If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up. You can't use the FIndMyiPhone app  on the iPod since the app requires iOS 7
    - You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
    - If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
    - Change the passwords for all accounts used on the iPod and report to police
    - There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
    - Apple will do nothing without a court order                                                        
    Reporting a lost or stolen Apple product                                               
    - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • HT4623 I have an ipad3, iPhone3gs and iPhone5, my problem is my apple ID works all 3 devices but I need a second ID for the iPhone 5. How do I delete my ID and set up a new one for the iPhone5 but keeping my own apple ID for the iPad and iPhone 3GS

    I have an ipad3, iPhone3gs and iPhone5, my problem is my apple ID works all 3 devices but I need a second ID for the iPhone 5. How do I delete my ID and set up a new one for the iPhone5 but keeping my own apple ID for the iPad and iPhone 3GS.

    http://support.apple.com/kb/he37

  • ICloud with os lion 10.5.8 and IPhone 3Gs

    What a pain in the A**.  Is there anyone out there that can assist me? I would soooooo appreciate the feedback.  Not sure if its fully functional with this combination. (ICloud, Lion 10.5.8, IPhone 3Gs)  I dont want MobileMe.  I have an Mac email. I have the Iphone 3Gs with all of the updates. I just downloaded ICloud to my MAC itunes to get some of my music off the hard drive and free up space. When I synced my IPhone through ITunes, I am not able to look at my photos, emails etc (gmail etc).  Its says I need to sign in with correct password? Ive put in the correct passwords?  I used the password that I use on my mac (which works fine) but doesn't work on IPhone?  Crazy.  I authorized my Itunes, with no luck of finding the area to adding the IPhone either?  Does anyone know if its compatible? I do have an upgrade to Snow Lepoard, (that I have not upgraded to yet) but was reading in the forum, thats its not compatible with ICloud and IPhone 3Gs?
    Any one that can help would be so greatly appreciated!

    Mac OSX 10.5 is Tiger, not Lion. iCloud is not supported on Tiger AFAIK unless you login to iCloud.com. I still run Snow Leopard (which you should probably upgrade to), and iCloud is basically useless for me. The whole reason we have iPhones is so we DON'T have to stay connected to Wi-fi 99% of the time to enjoy iOS services right? lol
    If your passwords don't work, you may just want to reset them, so then both your iPhone and Mac will recognize them.

  • My iphone 4 cant find wifi. i have reseted wifi and iphone, but it still isnt working! it just stopped yesterday. please help!

    my iphone 4 cant find wifi. i have reseted wifi and iphone, but it still isnt working! it just stopped yesterday. please help!

    You could try syncing the contacts with yahoo or google contacts, then sync them to the iPhone.  Or, export the contacts and then import them into one of the aforementioned servicse, or iCloud, then sync to the phone.

  • After updating iTunes and iPhone 3gs AppleMobileDeviceService.exe initializes and takes up 50% of CPU

    After updating iTunes and iPhone 3gs AppleMobileDeviceService.exe has been taking over 50% of my CPU.  When i attempt to sync my iPhone iTunes hanges on backing up.   I have uninstalled all the apple software and reintalled it.  This fixed the problem until QuickTime updated.  Immediately following the update Apple...Services.exe went haywire agian.  Any help?

    Thanks wjosten.  I've now been through all this, and there was a lot of old 3d party phone stuff to remove.
    However, I have not progressed really.  Any other thoughts on this please?

  • IPhone 3G and iPhone 3GS won't connect wirelessly at home when PCs are off.

    Dear Apple.com,
    I have been using iPhone 3G and iPhone 3GS wirelessly at home no problems.
    I use a MAC filter on an unsecured wireless network. Only entered MAC addresses can connect wirelessly.
    However, when I turn off all the PCs at home the iPhone find the wireless network and show connected, but cannot browse websites.
    The router Linksys WRT610N is always on, so the wireless connection and permission for the iPhone MAC addresses to access the wireless connection should work?
    Any ideas?

    Is your router a model that supports a/b/g/n? If you turn off N will it work? If your N is setup at 40MHz slots it may not work as well. Can you take your wireless router somewhere else for testing? I assume you might have some issue where you are at with your Mac and that router. When you open Apple Menu/About this Mac/More Info../Network/Airport does it show your network there? From a working machine can you see your Mac from your router web interface? FYI if your router was an Apple product(Airport Express or Airport Extreme/Time Capsule) you could see all your wireless clients via the Airport Utility, even signal strength and connection speed...

  • Wifi Problem iPhone 3Gs AND MAcBook Pro Retina 13" 2014

    Hey everyone,
    I recently started to experience a problem with my wifi connection with both my apple devices (an old iPhone 3 Gs and a new Macbook Pro Retina 13''). Both are on the newest (availbe in case of the iPhone) Os X. Let me describe the circumstances:
    I live in a house with 7 other students and the wifi router was quite far away, therefore I installed an ethernet connection with my laptop and tried to get used to a bad wifi signal on my iPhone. Well, at some point I was sick of that and installed an old router I found (Sweex LW050v2). For a time everything was working smoothly until other people in this house though they need another router on our floor and installed one (Sitecom0E5C02). As soon as they did that I started to have troubles on my iPhone and the Macbook as well (when I tried to use the wifi instead of the cable). The issue is not that I loose the wifi connection, but that I can not connect to the internet even though I have a connection to our wifi (I tried with all 3). In the beginning I though this was an issue with our router-setup (you can probably tell I am no expert) but at some point realised that I am the only one with a problem. Since then I have to disconnect from the wifi and connect again every time I loose the internet, which is now almost every 2 minutes!! Thus, my frustration and now me posting here with hopes of receiving help.
    I would much appreciate help or constructive suggestions.
    Thank you

    Hi Fedaja,
    There is a section in both of these articles for troubleshooting connecting to the Internet even when you can connect to Wi-Fi.
    Wi-Fi: How to troubleshoot Wi-Fi connectivity - Apple Support
    (that is for the Mac)
    iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
    (for your iPhone)
    Please check them out, testing as you go.
    Best regards,
    Nubz

  • TS1398 after upgrade to ios 6.0.1 WIFI is very weak or can not see WiFi networks (iPhone 3GS)

    Is there a way to restore the WiFi functionalilt of the iPHONE 3Gs after itw was upgraded to IOS 6.0.1 ?
    I see there are lots of things on the internet, but nothing that actually works !

    rzulfikar wrote:
    Thanks Chris for your solution.
    But just for you know that I bought Apple to get the 'after service', they should've warn the users not to upgrade to a higher OS if it can caused the phone 'dead'. Mine was totally unusable when it's just been upgraded. It stayed in the recovery mode and couldn't be restored. So I brought it to the nearest store and they did that to me, and eventually the phone is working, only it cannot detect my SIM Card...
    The problem is not about upgrading an iPhone to a newer version of iOS.  Your problem was upgrading a hacked phone, one of the well known consequences of which is re-locking and/or bricking the entire device when restoring in iTunes.  You chose to hack your phones firmware and operating system, so you must accept the consequences of going outside the bounds of normal use that Apple prescribes and supports.
    Had you not hacked it in the first place, you likely would have never had a problem, and if you had, Apple would have offered support to deal with it.  Your choice, your decision, your consequences.

  • HT1688 my wife has Iphone 3gs she is unable to connect to safari with net 10

    my wife has an Iphone 3gs and has Net10 service but she can't load Safari she had net 10 do a diagnostic on her phone and everything checked out is there a fix to this problem?

    After reading a few more posts, I also tried the following:
    airplane mode on, power off phone, power on phone, airplane mode off, wifi on
    And
    airplane mode on, wifi on, restart phone, airplane mode off, wifi on
    Still unable to connect to ANY wirless network

  • Email and iphone 3gs

    Can I use my old iphone 3gs without 3g and phone service and will it or should it still get emails if hooked up to wifi ?

    I've been using my old 3Gs as an iPod touch for a year or more - works fine.  NOTE - you will need a SIM in it if you ever need to restore it or re-activate it for any reason, so best keep the old SIM around to use for iTunes activation if needed.  Also, in the USA at least, even with no active account for the SIM, if the SIM is in it, that phone can still make 911 emergency calls (as per FCC requirements).
    Wifi is wifi and will work just fine, either with the SIM in it and no account for the SIM, or without the SIM in it at all.
    You do not need a SIM in it once activated in iTunes to sync, update apps or even the iOS, you just need a SIM if you need to re-run the iTunes activation for any reason (eg. a fubar'd iOS update that requires you to restore as new).

  • Extremely slow Wifi on iPhone 3GS

    Since upgrading from the iPhone 3G to a 3GS I've come to realise that the wifi performance is very poor compared to earlier models.
    I am talking about measured speed, rather than signal performance, for signal performance the 3GS actually seems slightly better than my 3G - eg it will connect to a base station from further away than the 3G, but when both are in range the 3GS is MUCH slower.
    Using the speedtest.net app on a 16Mbit ADSL2+ connection (which gives a measured performance of 14.5Mbit on a Macbook pro on the SAME wifi network) I get the following results:
    iPod Touch 1st Gen:
    Download: 7448 kbps
    Upload: 923 kbps
    iPhone 3G:
    Download: 5938 kbps
    Upload: 859 kbps
    iPhone 3GS:
    Download: 1029 kbps
    Upload: 316 kbps
    Clearly a big descrepancy here, with the iPod Touch almost 6 times faster in throughput, and the iPhone 3G not far behind.
    This is on an 802.11g network using a netgear router and WPA-PSK, but I have also tried an Airport Express with no significant change.
    Is anyone else noticing this problem ?
    Regards,
    Simon

    No, it's definately connected to wifi, besides, I'm not on AT&T as I'm not in the USA
    I've tested it in airplane mode as well to be sure it really is connecting by wifi.
    The way I see it, it's either a hardware fault in my specific phone, or a driver/firmware issue in the 3GS - one of the things that changed from the 3G to the 3GS is that there is a different wifi chipset, and it may be that the drivers are still immature.
    Waiting patiently on 3.1....
    Regards,
    Simon

  • Strange problem with how my iPhone (4S) sees a friend who recently moved his number from his old network and device to a new network and iPhone 3GS

    This is a weird one, so bear with me.
    My friend recently got an iPhone 3GS with a new SIM in it (3 network in the UK). I helped him set up the iPhone and got iMessage working between my mobile and his temporary number (07429...)
    In my Contacts I had two separate phone numbers for him: 07903... (his old number, on an old Sony Ericsson mobile with T-Mobile UK) and 07429... (the number that came with the 12-month contract I purchased for him; we called this his "temporary" number).
    His old number (07903...) was transfered over to his iPhone with no problems. His iPhone has worked flawlessly.
    But since that day I've had some really strange behaviour on my iPhone (a 4S, also on 3 UK): I removed his temporary number (07429...) from my contacts. But now when I try to text him at the old number (07903...) it bounces back at me as if the number doesn't exist. But if I try to text him at the temporary number (07429...) it works just fine and in my contacts and within Messages it appears as an iMessage-connect number.
    So I tried deleting everything and starting from scratch. Still the same behaviour.
    No one else is having this problem with him. I can call his old number (07903) just fine, I just can't text it.
    I'm guessing that there's something with the way Contacts works with iMessage that's caused the problem. It's as if my contacts have updated properly under-the-hood (iMessage *does* work just not with the right number).
    And yes, when I (or anyone) tries calling the temporary number (07429...) it's out of service. Which is correct. So it's not simply a case of *both* numbers being active.
    So this is very peculiar.
    In typing up this message it occured to me that I ought to try creating an all-new contact with some slight change in the name fields (e.g. include the middle initial) and see if I can get it to work properly. Then I ought to be able to change the name field (or just leave it alone, touch wood!).
    Thanks in advance for reading this far. It's difficult to explain this problem succintly!
    Cheers,
    Carey

    I've fixed my own problem.
    In the end, the issue was with iMessage on the other phone, not mine.
    While I had it connected to iTunes (the other phone, not mine), I could see that iTunes thought it was the temporary number (07429...). I turned iMessage off and back on again and the phone number in iTunes changed to the old (i.e correct) number (07903...).
    Subsequently, texts from my phone to the other phone showed up as blue-bubbled iMessages.
    Hope this helps someone!
    Thanks for reading, if you did.

  • No Synchronisation of Photos between iTunes 10.5 and iPhone 3GS after iOS 5

    I made the Update to iTunes 10.5 on my Notebook with Windows XP and the Update to iOS 5 on my iPhone 3GS.
    I had a lot of Problems (the Backup had an Error, my outgoing Mails were all deleted in all Mail Accounts, the Synchronisation of Music and Apps needs a lot of Synchronisations and a lot of Time and so on) with these Updates and I need more than 12 Hours at the Moment to repair all the Errors.
    My last Problem is:
    There is no Synchronisation of Photos between iTunes 10.5 and iPhone with iOS 5.
    I can not see my Photos in my iPhone.
    The Capacity in iTunes 10.5 shows 4,4 GB Fotos on my iPhone, but in my iPhone, there is no Folder in the Photo App and so I can not see the 4,4 GB of my Photos.
    This Problem comes with iOS 5. I had this Problem never before.
    First, I gave in iTunes a OK for a Home Sharing of Music, Videos, Photos and so on for the Folders and for the iPhone.
    Second, I was in iTunes in Photos and deleted the Check in the Folder Photos.
    Third, I made a Synchronisation with iTunes and the iPhone.
    Fourth, the Capacity of the Photos was then only at 0,17 GB.
    Fifth, I close iTunes and switched off the iPhone.
    Sixth, I started iTunes and iPhone new and bring both together with the USB-Port.
    Seventh, the Syncronisation started and the Capacity of the Photos in iTunes was at 0,17 GB, too.
    Eigth, I set a new Check in the Folder Photos in iTunes for a Synchronisation.
    Ninth, the Capacity showed 4,4 GB again.
    Tenth, the Synchronisation started and showed on the Display "2 Photos of 16.000".
    Eleventh, the Synchronisation Circle stopped after 10 Seconds, but the Notebook worked 2 Minutes longer.
    And after this the Synchronisation stopped appruptely / crashed (?) and the Photos are "unvisible" on the iPhone.
    Is this a known Bug?
    Has Someone a Solution for a correct Synchronisation of the Photos, so that I can see successfully my Photos in my iPhone again?
    Thank you very much for your Help!

    Ever since my upgrade to iTunes 10.5 my laptop has been crashing.  I've heard that the update ***** up 100% of your CPU, essentially crashing your computer.  Apple, fix this now!!!

Maybe you are looking for

  • Sql server 2014 developer edition error on setup.exe

    i downloaded the file from the MS Australia store > mount the disc image file > run the setup.exe and get above 2 errors. searching through forums i couldnt resolve as their were similar but not the exact problem. how to resolve this?

  • When is it available in the UK

    I really like the look of the BB Style and trawled alot of websites to findout if it is coming out in the UK, but nothing. Can someone pls advise me if it is and when?? Pav

  • Snow Leopard hands on restart?

    My IMAC with Snow Leopard 10.6.8 will hang upon restart. All the applications close and the desktop icons clear leaving just the desktop background picture. Also selecting an alternative book drive fails to start even when booting using the Option ke

  • Read mode for datasource

    Hello BW Experts, What is the benefit of read mode setting for the datasource ( master data). Thanks, BWer

  • While using safari, websites sometimes close off safari. What can I do, this didn't happen in the past

    I am having trouble with SAFARI lately. It closes off the whole application while browsing or opening a web page. This never happened in the past and I have no idea what to do to stop it from happening again.