Wifi and time issues please help.

My daughters iPod touch 5th generation is constantly resetting the time incorrectly, I had it on auto time in the correct time zone but it keeps eventually resetting to the wrong time then I tried manually inputting the correct time but it eventually reset again to the wrong time. It's also having issues picking up the wifi, we have 5 other i devices that have no problem with wifi so I know this problem is just specific to this particular unit. This has been an ongoing issue since day she got it Xmas 2012. I've tried restoring several times but to no avail. PLEASE can someone help. We spent a lot of money on this device and she can't use it to its full potential! :(

If you restored to factory settings/new iPod via iTunes (Not via Settings>General>Reset>Erase all Content and Setting) and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar

Similar Messages

Drag and drop issue, please help.

I can no longer drag and drop photos within photoshop elements 12. When working with a layer, I want to move it to a layer within another existing file, and no longer have the option. The only way I have fixed the issue in the past is uninstall and reinstall the program. I've read other forum posts and followed the instructions by resetting preferences and it does not work.
Does anyone have any solutions to this issue? Please help!

With both files open, simplest to tile them side by side, you should be able to drag the layer from the source file onto the target file. So long as it shows the 'grasping hand' you can release the mouse and it should add the layer to the target.
So what is happening now on your system? When you drag the layer to the target what icon is shown - 'grasping hand', 'no entry', something else?
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

ITunes and Quicktime issue (Please Help)

So last night I download the update for iTunes. Everything seemed to be going fine, I didn't have any problems. This morning I turn on my computer and try to run iTunes and it gives me an error message, an dwon't even open iTunes. Not only that, I can't run any Quicktime file, it gives me the same message. I downloaded the installer again and attempted to repair iTunes. It said I was sucessful, but when I tried opening iTunes or Quicktime the error still appeared. This is really frustrating, this is what I get for updating? Someone please help!

you'll probably want to run the standalone quicktime install
also, what is the error message that you are getting?
http://www.apple.com/quicktime/download/standalone.html
if that doesn't work, follow these steps
http://docs.info.apple.com/article.html?artnum=93976

6280 - Time issue (please help!)

This message has come up before but mine is still not working. When I receive a text, the time it is received is an hour behind, the same thing happens for a missed call. This is my third Nokia phone and one has already been sent to get fixed because of a range of issues. I have a new sim card aswell so its not that.
Any help appreciated.
Regards,
Shazia

27-Apr-2006
05:31 PM
rufao wrote:
unfortunately mobile phones take the time from the message - they do not generate the time stamp themselves.
in the UK the stamp will be applied to the message at the time of sending, sms is very similar to email in the way they are packed up for transmission.
again, if it were the phones - they would all be affected. instead there are only a few people here with this issue.
this is correct, maybe the networks are applying more than one time stamp? or in the case of the message starting on one network and finishes on another - if more than one stamp is present i guess its possible that the wrong one is used. i would suspect the phone uses the one it thinks is right - but of course if that one is the incorrect time you will see them go back an houre etc.

G530 - driver and key issues--please help!

Hey, everyone.
I'm having some issues. A while ago I upgraded to Windows 7 (32 bit) Home Premium, found out that I could no longer change the screen brightness. This was my only issue with the upgrade. So, I suffered through, later caught a virus through a bad download, and did a complete system restore, ridding myself of everything and restored back to Vista.
I recently--just a few hours ago--upgraded again to Windows 7, updated my BIOS, and thought everything was peachy. It is not so. The number keys (not the 'number pad') 1-0 do not work at all--only 7-0 if the number lock function is activated. I've triple-checked and restored my keyboard options to US standard but nothing doing. All of the other keys work.
As well as suffering through that, I've discovered that a driver I didn't realize I had, GuardedID, is not functioning properly, warning me with every few keystrokes: "GuardedID keyboard driver is not responding. More detail on the error is available in the Event Viewer under Manage in the toolbar. GuardedID is now turned Off." Not only am I irritated with this message popping up every so often but I'm becoming paranoid.
There is no trace of GuardedID on my computer--none that I can find. I tried searching online, finding software that I have to purchase but I am assuming that I would have had it 'free' if I hadn't even know I had it. Any kind of help would be amazing.
Thank you!

Hi binni,
Welcome to Lenovo Forum!
In regard to GuardedID, i'm not sure this community knowledge base article is helpful but you may want to take a look: Typed letters appearing as increasing numbers ( 0,1,2,3,4,5)
On another isuse about brightness control, there is another article about it that will be helpful for you if your machine type is type 4151 or 4446. G530 cant change brightness on Windows 7 Professional
Please feel free to search around the community knowledge base for more info
Hope these help!
Thanks!
Regards,
Cleo
WW Social Media
T61, T410, x240, Z500, Flex 14
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Driver and software issue, please help!

I am having an issue. I am running itunes v 7.2 and ever since, I get a message saying "disk burner or software not found". I have tried everything listed on these boards, including rebooting, updating the GEARS driver, etc. And nothing worked! I could only do the 32 bit GEARS though, the other two said my system don't suport them. Apple needs to come up with a fix. It looks like a lot of people have this issue! It is also a turnoff to itunes for people, including myself as I am considering droping itunes all together if this issue is not resolved. Even if it means I loose the songs I bought. I will just have to buy them again with another program and burn them on a program that works. I ran the diagnostic and this is what I got:
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Gateway Product Name
iTunes 7.2.0.35
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
LowerFilters: ASAPIW2k (6.0.2.0), Pfc (2.5.0.201), PxHelp20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.0.6.1),
Current user is an administrator.
Video Display Information:
NVIDIA GeForce4 MX Integrated GPU
Connected Device Information:
DiskDrive, ST3120022A, Bus Type ATA, Bus Address [0,0]
DiskDrive, Generic USB CF Reader USB Device, Bus Type USB
DiskDrive, Generic USB MS Reader USB Device, Bus Type USB
DiskDrive, Generic USB SD Reader USB Device, Bus Type USB
DiskDrive, Generic USB SM Reader USB Device, Bus Type USB
CDROM, LITE-ON CD-RW SOHR-5238S, Bus Type ATA, Bus Address [1,0]
CDROM, TSSTcorp CD/DVDW TS-H552B, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Failed while scanning for CD / DVD drives, error 2510.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
E: Unsupported CD or DVD drive.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
Failed while scanning for CD / DVD drives, error 2510.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
F: Unsupported CD or DVD drive.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
The last failed audio CD burn had error code -128(0xffffff80). It happened on drive E: TSSTcorp CD/DVDW TS-H552B on CDR media at speed 0X.
Any help would be great! Hope someone can help!
John

I have the same problem since I downloaded new version yesterday. Nothing on my computer has changed and it worked fine before.
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
GBT_ AWRDACPI
iTunes 7.2.0.35
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
LowerFilters: dvd43llh (3.5.0.0), PxHelp20 (2.0.0.0), CDR4_XP (6.0.0.171), PFC (2.5.0.204), AFS2K (3.1.21.0),
UpperFilters: InCDPass (4.2.4.1), Cdralw2k (6.0.0.171), pwd_2k (6.0.0.171), GEARAspiWDM (2.0.6.1),
Current user is an administrator.
Video Display Information:
RADEON 9200 SERIES - Secondary
RADEON 9200 SERIES
Connected Device Information:
DiskDrive, WDC WD2000JB-32EVA0, Bus Type ATA, Bus Address [0,0]
CDROM, HL-DT-ST DVDRAM GSA-4163B, Bus Type ATA, Bus Address [1,0]
CDROM, SONY CD-RW CRX300E, Bus Type ATA, Bus Address [0,0]
CDROM, EP1124E APY451T SCSI CdRom Device, Bus Type SCSI, Bus Address [0,0]
CDROM, NERO IMAGEDRIVE2 SCSI CdRom Device, Bus Type SCSI, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Failed while scanning for CD / DVD drives, error 2500.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
D: Unsupported CD or DVD drive.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
Failed while scanning for CD / DVD drives, error 2500.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
E: Unsupported CD or DVD drive.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
Failed while scanning for CD / DVD drives, error 2500.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
F: Unsupported CD or DVD drive.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
Failed while scanning for CD / DVD drives, error 2500.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
G: Unsupported CD or DVD drive.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.

Date and timestamp issue please help

In the following creation_date is DATE datatype.
creation_time is VARCHAR2 having only MI:SS (16:02).
:DATE_LAST_CHECKED is VARCHAR2 having string without time.
If that be the case how can I compare these 2 statements with the time. I need to compare with timestamp.
Please let me know.
TO_DATE(TO_CHAR(TRUNC(csa.CREATION_DATE),'DD-MON-YYYY') ||' ' || csa.creation_time,'DD-MON-YYYY HH:MI pm')
= TO_DATE(NVL(:DATE_LAST_CHECKED,SYSDATE-5),'DD-MON-YYYY HH24:MI:SS')

I won't even ask why creation_date and creation_time are split out into separate columns. The DATE datatype supports both and you will have to code conversions like this all over the place.
to_date(to_char(csa.creation_date, 'mm/dd/yyyy') || csa.creation_time, 'mm/dd/yyyyhh:mi pm')
= nvl(to_date(:date_last_checked, 'mm/dd/yyyy'), trunc(sysdate - 5))

Itunes 7 and burning issues - Please help!

Hello!
I upgraded to itunes 7 yesterday and now I can't burn CDs. When I insert the CD it says checking media, the CD light flashes, then it does nothing. The panel at the top goes back to the apple logo?
Any idea what I should do? I tried emailing apple, but none of their suggestions were relevant.
HELP!!!!!!!

My diagnostic says this:
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
TriGem Computer, Inc. Cupertino
iTunes 7.3.2.6
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
LowerFilters: PxHelp20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.0.6.1),
Current user is an administrator.
Video Display Information:
RADEON 7000 / RADEON VE Family (Microsoft Corporation)
NVIDIA GeForce2 MX/MX 400 (Microsoft Corporation)
Connected Device Information:
Disk drive, SAMSUNG SV4002H, Bus Type ATA, Bus Address [0,0]
CD-ROM Drive, SAMSUNG CD-R/RW SW-224B, Bus Type ATA, Bus Address [1,0]
CD-ROM Drive, SAMSUNG DVD-ROM SD-616T, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
D: SAMSUNG DVD-ROM SD-616T, Rev F300
Audio CD in drive.
Found 22 songs on CD, playing time 78:03 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:37:22
Track 3, start time 07:04:40
Track 4, start time 10:54:17
Track 5, start time 14:00:37
Track 6, start time 17:53:12
Track 7, start time 21:49:05
Track 8, start time 25:33:60
Track 9, start time 29:22:72
Track 10, start time 33:02:25
Track 11, start time 36:10:65
Track 12, start time 40:13:52
Track 13, start time 43:33:12
Track 14, start time 47:09:45
Track 15, start time 50:19:45
Track 16, start time 53:58:40
Track 17, start time 57:52:02
Track 18, start time 61:05:65
Track 19, start time 64:49:47
Track 20, start time 67:57:55
Track 21, start time 71:30:22
Track 22, start time 74:29:50
Audio CD reading succeeded.
Get drive speed succeeded.
E: SAMSUNG CD-R/RW SW-224B, Rev R201
Drive is empty.

Urgent and typical issue- Please help!!

Dear All,
I have a BOM material(say M) which is made up of 3 components(say A, B and C).
I procure component A from 3 different countries(T1, T2 andT3), component B from 2 different countries(T4 and T5) and component C from 4 different countries(T6, T7, T8 and T9).I process them and prepare a finished good M(as mentioned above) and export it. I want to track the country of origin of each of the components of this BOM.How can I achieve this?
To make my question more clear..If I am exporting material M, I should be able to track all the 9 countries(T1..T9) because M is made up of 3 components procured from 9 countries(in all).
Since the problem is critical, I would appreciate your urgent help on this.Thanks!!

Hi Venkat,
Thankyou so much for your response.I came to know about you beforehand, from one of your students whom you are grooming on GTS.As the problem was really critical I tried to contact you, to seek your help, but couldn't reach you.Can you please mail me your contact number on [email protected]
I need to talk to you for a few minutes to discuss this.
Thanks again!!

Web ADI Error: Permissions and Connection Issues (Please Help)

Hello
I'm new to WEB ADI and I'm trying to set up on an 11.5.10 Oracle Application. I'm reading the white paper "Understand and using Web ADI in Oracle HRMS" From metalink
I created the functions Create Document, Web ADI Layout Definition, Web ADI Text Mapping and HRMS Create Document. I also create the sub menus HR ADI Seeded Integrator Form Functions and HR ADI Skills Seeded Integrator Form Functions in the menu US_SHRMS_NAV, and made sure the ‘BNE Allow No Security Rule’ is set to Yes
I was able to get the seeded download procedure to work, however the seeded upload procedure didn't work for me. I received an error " The connection to the server is unavailable". I also notice that I don't have access to HR Update Salary Proposals Integrator or the HR Integrator Setup integrator, when I select them from WEB ADI I get the following error "You do not have permission to access this functionality."
Can someone please assist me in get passed these issue?

Please see these docs.
When Trying To Upload the Salary Proposal Receiving Connection Unavailable Error [ID 604200.1]
Error -The Connection to the Server is Unavailable When Upload Web ADI - Interface Columns Integrator [ID 394680.1]
WebADI Upload ''Connection To The Server Is Unavailable'' While Uploading [ID 419995.1]
Web ADI Create Document Fails - Connection to The Server is Unavailable Error on Worksheet [ID 334632.1]
Connection To The Server Error Message When Using WEBADI journal upload [ID 556465.1]
WEBADI Cannot Upload ADI Spreadsheet Because "The Connection To Server Is Unavailable." [ID 359584.1]
Connection Unavailable Error Occurs When Uploading Files In Web Adi [ID 271811.1]
Error 'The Connection To The Server Is Unavaiable' when Uploading WEB ADI Document [ID 847091.1]
BNE.D Web ADI Letters Fail to Export Download is an Empty Document - Spreadsheet [ID 329926.1]
Also, please check the BNE.log file for details about the error -- How to Create a BNE Log For Web Adi Issues and Errors? [ID 817023.1]
Thanks,
Hussein

Reinstalling iPhoto : 08 and 09 Issues - PLEASE Help

I has iPhoto 08 that came with my MBP last year.
Then upgraded to iLife 09.
iPhoto 09 started to have problems since I upgraded to SL.
So I read in Apple support forum and decided to do a fresh install of iPhoto.
Uninstalled iPhoto 09. Removed all necessary files. Didn't touch the library.
Used my MAC OS X Install Disc 1 and 2 to reinstall iPhoto.
But now it says I have used a newer version of iPhoto to modify the library and iPhoto quits.
Uninstalled iPhoto again.
Ran my iLife 09 DVD. It installed iPhoto.
But it still says I have used a newer version of iPhoto to modify the library and iPhoto quits.
What should I do?!

Thank you sooooo much! You are just fantastic! 35000 posts? Even Jobs could not have managed that
Btw, can you tell me why my MBP SL trackpad is soooo darn sluggish and does not want to respond as well after upgrading to SL from L?
Thanks a lot once again. iPhoto issue has been resolved - at least it is working again. Now I have to see if the previous problems are there or not.

BT home hub and broadband issues please help!!

This **** thing is driving me crazy.
To get broadband in my house we have to go with BT so signed up about a week and a half ago and got sent a home hub 3.
the thing connected up ok but the flaming internet connection drops out every 5 to 10 mins and its **bleep** annoying.
anyway a couple of days into the contract and the first home hub packs up, phone bt and am on with their broadband technician who i can barely understand for 30 minutes when he decides that the home hub is broke so he send out a new one a few days later......
connect that one up and its exactly the same dropping internet connection all the time and with a day and a half that home hub packed up too!!!!!!!!!!!!!
so i spent another 30 mins on the phone to bt again, no sorry nothing, send me another home hub so thats the third one in under 2 weeks and ive only had it connected for an hour or so and its dropping internet connection about every 5 mins.
effing rubbish
anything i can do ??? cant put up with this for 12 months!!!

this is my event log for today.......
10:24:41, 25 Jan.
(63935.400000) Admin login successful by 192.168.1.64 on HTTP
10:24:02, 25 Jan.
(63895.970000) Lease for IP 192.168.1.64 renewed by host SARENTON (MAC 00:17:3f:d7:87:ef). Lease duration: 1440 min
10:24:02, 25 Jan.
(63895.970000) Lease requested
10:24:02, 25 Jan.
Host 00:17:3f:d7:87:ef connected to SSID 'BTHub3-Q92C' at 24 Mbps
10:24:01, 25 Jan.
Host 00:17:3f:d7:87:ef connected to SSID 'BTHub3-Q92C' at 18 Mbps
10:23:45, 25 Jan.
Host 00:17:3f:d7:87:ef connected to SSID 'BTHub3-Q92C' at 12 Mbps
10:22:38, 25 Jan.
Host 00:17:3f:d7:87:ef connected to SSID 'BTHub3-Q92C' at 11 Mbps
10:22:29, 25 Jan.
Host 7c:61:93:1d:1d:2a connected to SSID 'BTHub3-Q92C' at 54 Mbps
10:22:29, 25 Jan.
Host 00:17:3f:d7:87:ef connected to SSID 'BTHub3-Q92C' at 24 Mbps
10:22:20, 25 Jan.
Host 00:17:3f:d7:87:ef connected to SSID 'BTHub3-Q92C' at 36 Mbps
10:22:16, 25 Jan.
Host 00:17:3f:d7:87:ef connected to SSID 'BTHub3-Q92C' at 24 Mbps
10:21:42, 25 Jan.
(63756.560000) Lease for IP 192.168.1.64 renewed by host SARENTON (MAC 00:17:3f:d7:87:ef). Lease duration: 1440 min
10:21:42, 25 Jan.
(63756.560000) Lease requested
10:21:42, 25 Jan.
Host 00:17:3f:d7:87:ef connected to SSID 'BTHub3-Q92C' at 18 Mbps
10:21:41, 25 Jan.
Host 00:17:3f:d7:87:ef connected to SSID 'BTHub3-Q92C' at 11 Mbps
10:21:10, 25 Jan.
Host 00:17:3f:d7:87:ef connected to SSID 'BTHub3-Q92C' at 24 Mbps
10:19:55, 25 Jan.
Host 00:17:3f:d7:87:ef connected to SSID 'BTHub3-Q92C' at 18 Mbps
10:19:39, 25 Jan.
Host 00:17:3f:d7:87:ef connected to SSID 'BTHub3-Q92C' at 24 Mbps
10:19:07, 25 Jan.
(63601.010000) Lease for IP 192.168.1.64 renewed by host SARENTON (MAC 00:17:3f:d7:87:ef). Lease duration: 1440 min
10:19:07, 25 Jan.
(63601.000000) Lease requested
10:19:07, 25 Jan.
Host 00:17:3f:d7:87:ef connected to SSID 'BTHub3-Q92C' at 24 Mbps
10:19:06, 25 Jan.
Host 00:17:3f:d7:87:ef connected to SSID 'BTHub3-Q92C' at 18 Mbps
10:18:50, 25 Jan.
Host 00:17:3f:d7:87:ef connected to SSID 'BTHub3-Q92C' at 24 Mbps
10:18:46, 25 Jan.
Host 00:17:3f:d7:87:ef connected to SSID 'BTHub3-Q92C' at 18 Mbps
10:18:42, 25 Jan.
Host 00:17:3f:d7:87:ef connected to SSID 'BTHub3-Q92C' at 12 Mbps
10:18:37, 25 Jan.
Host 00:17:3f:d7:87:ef connected to SSID 'BTHub3-Q92C' at 11 Mbps
10:18:08, 25 Jan.
Host 00:17:3f:d7:87:ef connected to SSID 'BTHub3-Q92C' at 12 Mbps
10:17:04, 25 Jan.
Host 00:17:3f:d7:87:ef connected to SSID 'BTHub3-Q92C' at 11 Mbps
10:16:58, 25 Jan.
Host 00:17:3f:d7:87:ef connected to SSID 'BTHub3-Q92C' at 36 Mbps
10:16:55, 25 Jan.
Host 00:17:3f:d7:87:ef connected to SSID 'BTHub3-Q92C' at 24 Mbps
10:16:45, 25 Jan.
Host 00:17:3f:d7:87:ef connected to SSID 'BTHub3-Q92C' at 36 Mbps
10:16:31, 25 Jan.
Host 00:17:3f:d7:87:ef connected to SSID 'BTHub3-Q92C' at 24 Mbps
10:15:31, 25 Jan.
Host 7c:61:93:1d:1d:2a connected to SSID 'BTHub3-Q92C' at 48 Mbps
10:12:19, 25 Jan.
Host 00:17:3f:d7:87:ef connected to SSID 'BTHub3-Q92C' at 48 Mbps
10:10:46, 25 Jan.
Host 7c:61:93:1d:1d:2a connected to SSID 'BTHub3-Q92C' at 18 Mbps
10:10:39, 25 Jan.
(63093.350000) Lease for IP 192.168.1.64 renewed by host SARENTON (MAC 00:17:3f:d7:87:ef). Lease duration: 1440 min
10:10:39, 25 Jan.
(63093.350000) Lease requested
10:10:39, 25 Jan.
Host 00:17:3f:d7:87:ef connected to SSID 'BTHub3-Q92C' at 24 Mbps
10:05:02, 25 Jan.
Host 7c:61:93:1d:1d:2a connected to SSID 'BTHub3-Q92C' at 18 Mbps
10:04:54, 25 Jan.
Host 00:17:3f:d7:87:ef connected to SSID 'BTHub3-Q92C' at 18 Mbps
10:03:20, 25 Jan.
Host 7c:61:93:1d:1d:2a connected to SSID 'BTHub3-Q92C' at 5 Mbps
10:02:21, 25 Jan.
Host 00:17:3f:d7:87:ef connected to SSID 'BTHub3-Q92C' at 11 Mbps
10:00:33, 25 Jan.
Host 7c:61:93:1d:1d:2a connected to SSID 'BTHub3-Q92C' at 18 Mbps
10:00:20, 25 Jan.
Host 7c:61:93:1d:1d:2a connected to SSID 'BTHub3-Q92C' at 12 Mbps
10:00:19, 25 Jan.
Host 7c:61:93:1d:1d:2a connected to SSID 'BTHub3-Q92C' at 11 Mbps
10:00:02, 25 Jan.
Host 00:17:3f:d7:87:ef connected to SSID 'BTHub3-Q92C' at 24 Mbps

JQuery and DW issue - please help

Hi,
I'm building a site in DW CS4. You can see it below. What I did was create 2 images in the right header section that blend in (the images will change in about 7 seconds via refresh). But I do not like this refresh method:
http://designerandpublisher.com/premier/site/
So I found a Jquery to smoothly change those photos. I first did a test by setting up overlaid DIVs to just get it to work. I got this test working properly as seen below:
http://designerandpublisher.com/premier/test/overlay.html
So then I started tweaking the CSS to try to get it to work on the actual page in the first link above. Keep in mind that none of the images on the page below are there except for the testing of the JQuery. I cannot seem to get it to work. Any ideas?
http://designerandpublisher.com/premier/test/overlay2.html

Hi
Thanks for getting back with me. I tried a different Jquery that seems to work better with this layout. Now, I've run into getting the slideshow to fit up there without overlapping the left circles. And the text underneath is now spilling down into the other section. Here is the original:
http://designerandpublisher.com/premier/site/index.html [refreshing; don't want that]
And the new version:
http://designerandpublisher.com/premier/hold/master-home.html
Any ideas?

Firefox has been crashing all the time after I updated to the newest version. I tried to uninstalled firefox and all addons. Restarted the computer to reinstall Firefox and it's still crashing all the time. Please help.

Firefox has been crashing all the time after I updated to the newest version. I tried to uninstalled firefox and all addons. Restarted the computer to reinstall Firefox and it's still crashing all the time. Please help.

https://support.mozilla.com/en-US/kb/Firefox%20crashes#w_get-help-fixing-this-crash
Type '''about:crashes''' in the URL bar and hit Enter. <br />
Click the hyperlinks to bring up the Crash Report pages and copy'n'paste the URL of each of those reports into the message box here. We'll see if we can help you figure out what is causing those crashes to happen.

I made a card using the iPhoto and when I click to buy it, it says that I did not fill all the frames with pictures, even though I did and have checked multiple times. Please help, it's for Mother's Day.

I made a card using the iPhoto and when I click to buy it, it says that I did not fill all the frames with pictures and that I need to in order to purchase it, even though I did and have checked multiple times. Please help, it's for Mother's Day.

Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
LN

Wifi and time issues please help.

Similar Messages

Maybe you are looking for