Wifi antenna for N70 or any S60

Hello
Is anybody know something about a project of a wifi antenna for the N70 ?
I must not be the only one to have this need ?
Thanks

the n70 doesnt have wifi. not all the s60 phones do right now.
when it comes to needing an external antenna, its not needed. the phone has a built in antenna that is capable of getting connections to wlans very well - i have test this on mine, at work i can get a connection anywhere on my floor...
given the way wlans fluctuate, if you are having connection problems it probably isnt down to the way the phone is poicking it up - it is probably down to the signal of the wlan

Similar Messages

  • WiFi antenna for G-5

    Where can I order a WiFi antenna for my hard of hearing G-5

    Hi, and a Warm Welcome to Apple Discussions and the Power Mac G5 Forum!
    The Airport Extreme! antenna part no. is here
    http://www.welovemacs.com/9226043.html
    You can often find them on eBay.

  • REPLACEMENT WIFI ANTENNA FOR F4580 DESKJET ALL IN ONE PRINTER

    HI I WONDER IF ANY OF YOU GUYS AT HP CAN TELL ME WHERE I CAN GET HOLD OF A REPLACEMENT WIFI LEAD/ ADAPTER/ ANTENNA TYPE LEAD THAT PLUGS INTO THE BACK OF MY DESKJET F4580 ALL IN ONE PRINTER , ITS SORT OF 8mm SQUARE IN SHAPE THANK YOU FOR YOUR TIME

    Was the printer purchased on one country but you are in another?  If so you will need to Contact HP to request a "Regionalization Reset". There should not be any charge for this, it is covered as part of the cartridge warranty. You will need to have access to your computer and printer while on the line with HP. You will also need to have a set of cartridges for the new region, once the reset is complete cartridges from the original region will no longer work.  HP's web page on the subject is here.
    You can find the correct cartridges for your area from the HP SureSupply site.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Do I need an antenna for Power Mac G5 Wifi?

    From the last 30 minutes I've spent surfing the interent about this subject I have learned that I need an AirPort Extreme Card.
    Do I need the wifi antenna also? I think I read that without it the wifi is pretty weak but my router is just across the hall.
    Also, let me know if there ANY other options to get wifi please!

    You need an antenna for all G5 towers from 2003 to early 2005 models.
    The T shaped antenna is easily found on the web.
    2 hacks are listed in my post here:
    https://discussions.apple.com/message/18677374#18677374

  • TS1398 Hi I run the 6.0.2 patch and I stiil have the same problem, no wifi connection even if i change the wireless antenna and the security any ideas??

    Hi I run the 6.0.2 patch and I stiil have the same problem, no wifi connection even if i change the wireless antenna and the security any ideas??

    There are two steps to the update for an iPhone 5. First you run the patch then you update the iOS. Did you do both? And does iOS 6.0.2 show up in Settings > General > About > Version
    The first thing apple will tell you to do if you bring them the phone is to reset the phone. Try that before going any further.
    First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

  • My wifi worked for over a year then my parents took my ipod away for a month when i got it back the wifi didnt work i tried resetting my network it didnt work (it also says im connected) any suggestions?

    my wifi worked for over a year then my parents took my ipod away for a month when i got it back the wifi didnt work i tried resetting my network it didnt work (it also says im connected) any suggestions?

    they might have changed the password for the netowrk ..

  • I have a 13.5 month old Ipad2, wifi only that has had problems with wifi com from the beginning. I am learning that this is not unusual for apple. Any suggestions?

    I have a 13.5 month old Ipad2, wifi only that has had problems with wifi com from the beginning. I am learning that this is not unusual for apple. Any suggestions?
    ronald1094

    Try #5.
    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Is there any antenna for airport express?

    I think i´m having problemas with the signal of my airport express and all the readings i made always refer antennas for airport extreme base station.
    My question is, if there is any antenna for airport express that don´t needs an extreme base station.
    Thanks
    Ricardo
    Pentium IV   Windows XP Pro  

    Two quick things to check using AirPort Utility on both devices:
    On your "main" base station
    Open AirPort Utility - click Manual Setup
    Click the Wireless tab/label located just below the row of icons
    There must be a check mark next to "Allow this network to be extended"
    Click Update to save your changes.
    If you don't see this option, you likely have an older AirPort Extreme that does not support the "extend" feature. Please clarify on the version that you have
    On your AirPort Express
    Open AirPort Utility - click Manual Setup
    Click the Wireless tab
    Wireless Mode = Extend a wireless network
    Wireless Name = Same name as your main network
    Check mark next to "Allow wireless clients"
    Wireless Security = Same setting as your main router
    Wireless Password = Same password as your main network
    Confirm Password
    Click Update to save settings
    If you do not see the "Extend a wireless network setting", you may have an older AirPort Express, or if you are sure that you have a newer 802.11n model, try holding down the option key while you click on the selection box to see if the "Extend" setting will appear.
    Assuming no major obstructions between the main router and area that needs more wireless coverage, a good starting location for the Express would be a point that is approximately half the distance between the main router and the area that needs more coverage.
    As I said, this feature works very well if major obstructions do not come into play.

  • No IP address, everytime I'm close to my mums mac running off the same wifi, it's giving me this error. I can trouble shoot for about 3 mins and fix it, but it just keeps happening and I need a permanent fix for it. Any help?

    No IP address, everytime I'm close to my mums mac running off the same wifi, it's giving me this error. I can trouble shoot for about 3 mins and fix it, but it just keeps happening and I need a permanent fix for it. Any help?

    this is what you need to do to exclude everything apart from desktop.
    on time machine preferences, click on Options
    click plus sign, on the new window, click macintosh HD
    do a Control + A then deselect users then click okay
    go to options again, plus sign, go to users, control +A then deselect your user account
    go to options again, plus sign, go to your user account, control + A, deselect desktop
    start the back up.

  • HT1766 my wifi antenna isn't working....the phone has icloud but without wifi it cannot back up any information!!!

    wifi antenna isn't working and need to back up phone throught icloud but how is that possible to do if the wifi isn't working???

    Hello Bren,
    Thank you for details of the issue you are experiencing with backing up your iPhone to iCloud.  I have a couple of suggestion to help with getting your iPhone backed up.
    If you have not tried troubleshooting the issue you are experiencing with Wi-Fi on your iPhone, I recommend reviewing the following article:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    If you have tried those steps and it is indeed a hardware issue with your Wi-Fi antenna, I recommend backing up using iTunes:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    http://support.apple.com/kb/HT1766
    Additionally, the following resource provides information on getting your iPhone serviced:
    Service Answer Center - iPhone
    http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • External Antenna for JetPacks to increase WiFi strength

    I am wondering if the external antenna ports can be used to strengthen the WiFi signal for your clients connecting?  All I can find in manuals and online is that they are for increasing the 4G signal to connect to Verizon.
    Thanks in advance,
    TMoeZ

    No.  Antennas are for the VZW signal used to communicate with the local towers in your area.
    If you want to boost the WIFI signal strength then you need to look into something called a wireless repeater.  A repeater will grab the WiFi of the Jetpack and boost it through its own more powerful equipment.  There are many products out there that can do this from CradlePoint, Pepwave and Netgear.
    I would post a diagram of how the repeater interacts with the jetpack but it seems like that feature is currently disabled on the forum : /.  If they restore it then I will post it for you. Maybe I can find a link to one of my old posts that you can reference instead.

  • Homebrew WiFi Antenna (Proper Cable, LMR-195 GR-58?)

    Hey,
    I don't know if this is the best forum for my questions, and if not please direct me to one that better suits my needs. I was simply referred to this forum through another one. Anyhow, me and my friend are attempting to build our own wifi antenna and after searching google for a while we have come up dry on a couple things.
    1), From the wifi card we wish to attach a cable that will be say 25-50 ft in length which will then attach to the card's reg 3 inch antenna, pretty much extending the antenna from the card. What is the best cable to do this. Originally we were told to use GR-58 50 Ohm Coax cable however after reading further we found that would only be good for 3-4 ft before it pretty much "spills the connection all over the place". We were then recommended to use LMR-195 or better though what type of cable is this as it does not seem to be supplied by Radio Shack. The question is what cable would you guys recomend that could hold a wi-fi signal 25-50 ft from the end of the antenna on one end back into the wifi card on the other, and where can we purchase it?
    Thanks in advance and if this is not a good forum for these questions please direct me to another. As time goes on we will build our own antenna but right now we want to get the reg antenna to work over a decent length of cable.

    OK. Understood. You have a massive challenge ahead of you. Also be warned that an external antenna that is not properly protected and grounded can be a fire and safety hazard, and that it can accumulate enough of a static charge in dry, windy environmants to blow up your system (not so much like "boom" , but static electricity is deadly to most semiconductors).
    Next, you may want to study on how to make a BALUN / UNUN because the WiFI stuff is 50 Ohm impedence, and your average TV antenna is 300 Ohm (assuming it's a classic LPDA - Log Periodic Dipole Array).
    An LPDA for TV will have some elements for ~50 MHz, 260 Mhz, 512MHz, and if it's also a UHF antenna, it might be good up into the 900 MHz ranges. LPDA ware pretty wide spectrum, and you'll probably luck out and hit a harmonic somewhere.
    You'll need to craft a 6:1 balun, not that big of a deal actually. Shop some of the amateur radio sites (like aesham.com) for materials or to just buy a 6:1 BALUN.
    The Gain of a typical ~ 6 ft LPDA could likely provide enough gain to make the system work =-->IF<--= the cabling is very high quality, the cable termination is nearly perfect, your BALUN is efficient enough, and you don't lose too much signal through the protection system (that would be the protection system against lightning and static ... includes a thingy called a "lightning arrestor" that in no way, form, or fashion could do anything to stop lightning).
    By the way, you'll want to bring that TV antenna down and clean every connection on every element. Any noisy junction will kill your signal.
    All-in-all, the cable shouldn't cost you more than a couple hundred dollars, the materials for the BALUN another ~US$10-20, connectors another US$20-50, protection elements, maybe another US$25-100 depending on who and what you go with.
    Here's a link with some good info regarding wireless signal propagation, 802.11, and antenna stuff.
    http://www.cisco.com/en/US/products/hw/wireless/ps469/products_data_sheet09186a008008883b.html
    Good Luck, make it a great learning experience!
    Scott

  • Qosmio X775-Q7272 Audio problem when WiFi antenna is on

    I have had this laptop since Oct 2011 and I love everything about it with one very annoying thing.  It seems that any time that I play any form of audio (streaming from the net, MP3 on HD, from USB jump drive) I get what I would call digital stutter during the playback.  I have found that if I turn the WiFi antenna off then the problem goes away.  However, as soon as I turn the WiFi back on the problem comes back.  I have already double checked all drivers and they are all current.  I have seen other post of audio issues and was wondering if anyone else has tried playing with the WiFi on or off.  Any help would be greatly appreciated.
    Dave

    The WiFi that I have is the Atheros and I have done a complete system restore at least 12 times and before I even let windows start it's parade of updates it has the problem and the problem persist even after windows updates are all installed properly.  In the device manager all drivers report working fine and I have checked for updates to any of the drivers.  My fear is that this is going to be some form of RF interference and it will have to be repaired.  At least it is still under warranty.  Any other suggestions please toss them my way. 
    Thanks,
    Dave

  • I cannot get GPS Only to work on my ipad3 (4g version, but not on an active cell plan, and wifi off).  Is there some new requirement in 7.1 or 7.1.1 to have cell and/or wifi enabled for GPS to work? I am testing with MotionX

    It seems like I cannot get GPS only to work on my ipad3 (4g version, but not on an active cell plan, and wifi off).  Is there some new requirement in 7.1 or 7.1.1 to have cell and/or wifi enabled for GPS to work? I am testing with MotionX, garmin blueChart mobile, and a GPS monitoring tool. All show no signal. If I turn on cell and wifi,  it says I get gps signal, but can't tell if that is from the GPS chip, or just from cell and wifi only (maybe with some gps mixed in)?  Any ideas on how to get iPad working with GPS only??

    Roger that.  Thanks for your time.
    System:
    Windows 7 64bit
    Processor: AMD phenom IIX4 965
    RAM:  Gskill Ripsaw F3-12800CL7D-4GBRM (2-2GB sticks)
    GPU:EVGA Classified Nvidia GeForce GTX 560 Ti 448 core
    PSU: Kingwin 1000W laser gold (LZG-1000)
    Yes. tried the one ram stick, no go.  I have been trying to boot off/install the windows 7 disk but am unable to get to the point where windows starts installing after its gathering information portion of the install.  I can get to the disk selection screen of the install with the WD HD on SATA port 2 but then get the "cant install messages" when I try to select the Vertex 3.  Yes I can see the Vertex 3 Drive as well as the WD drive at this point.  some times I have to hit "scan" a couple of times.

  • Since upgrading to Mountain Lion, my home wifi dies for all devices when I bring my MacBook Pro home.

    The situation:
    Ever since upgrading to Mountain Lion, the following sequence of events has happened with my laptop.
    1. I come home from work.
    2. I open the lid of my laptop.
    3. I see the white "your comptuer's messed up" screen. I click a button to restart.
    4. We lose wifi. This affects all devices.
    5. I restart the router and modem.
    Once it's restarted, I have no issues - until I leave for work and bring the computer back that night. I've checked the router and modem - no issues there, as it works perfectly for every other device in the house, and even works for the laptop perfectly (once they've been reset, that is).
    Some notes of clarification:
    1. The wifi does not die with any other device - this includes an iPhone 4S, iPhone 4 and an iPad 1.
    2. BUT, when the wifi DOES die, it affects every device in the house.
    3. My laptop does not do this with any other wifi - only my home wifi.
    It seems to me that the correlation is in the initial connection. When my laptop initially tries to connect to our home wifi, it's as if it fries both the connection and the computer. I see a lot of issues with people losing wifi for their computer, or slow wifi, but I haven't seen anything that relates to this wifi death across all devices when the laptop is reawoken after being at work. It's like there's something messed up with the switch from work wifi to home wifi.
    Please help!
    Details:
    2011 MacBook Pro 15-inch
    OSX 10.8.1 (12B19)

    Hi,
    I had a similar issue with Time Machine after upgrading my iMac (where the Time Machine HDD is connected and shared from) to Mountain Lion. This was fixed by following the instruction from this site: http://support.apple.com/kb/HT4700. It seems that Mountain Lion introduced a more secure network protocol which may not be supported (yet) by the network drive.
    Hope this helps.
    BR,
    Hindra

Maybe you are looking for

  • I3 os4 - i4s os5 Albums gone - Cam roll missing photos

    ITunes 10.5 pc THE StORY: 3G phone------------- Spent hours sorting 4000 pics on 3G os4 ready for 4s os5 upgrade. - created 9 albums from pics on camera roll  - Noticed photo library gets larger as I do this. - on iPhone, manually delete photos in Ca

  • Spark datagrid style by row

    I'm trying to change the style of spark datagrid rows based on data, I've found examples about itemrenderer and columns, but they doesn't fit in this case. I'm looking for a method to change font (weight, size, color) and background based on data val

  • RSA2 Does not allow changes

    I was reading a OSS note that said you could change a hierarchy datasource using RSA2. I want to change the class used from 0000 to 0110. How is this done. My RSA2 is display only Thanks

  • 8820 Help on internet connections

    Hi friends: I bought one BB 8820 from AT&T unlocked at Miami (TigerDirect)  in order to be used in my country-Costa Rica- This phone only use the connection for internet by Wi-Fi and do not accept our local connection in GPRS so it can runs well the

  • How to close browser window after flushing a file to the browser?

    I have this simple JSP, which flushes a String to the browser as a file (message.txt). The JSP gets opened in a new window when the user clicks a link. The problem is that after the JSP has run, the browser window won't close automatically. I've trie