Wifi, Arsenal , doesn't work.

Yesterday at Arsenal i pulled out my 3Giphone, hoping to use the public arsenal WIFI. it came up with a login, and said to get vouchers I had to go to the press office ?!
yet the guy infront of me, suddenly used his 3G and he got immediate access, I asked if he has set anything else up and he said no !
the cloud was available, didn't work, there was a free public WIFI, didn't work.
infact i have been in different locations recently and I find that what should be unlocked and accessible, isn't.
am I alone, cos if I am then it must be a settings thing.
Dan

If I remember rightly, i think you have to register the first time you access the Cloud.
Then it remembers you.

Similar Messages

Every app on my ipod (2nd gen) which requires wifi connection doesn't work although the wifi mark is on. i did try restarting my ipod, resetting network setting, disconnect from wifi and reconnected it but non of them worked.

every app on my ipod (2nd gen) which requires wifi connection doesn't work although the wifi mark is on. i did try restarting my ipod, resetting network setting, disconnect from wifi and reconnected it but non of them worked.

This may sound silly but try your date a time setting my ipod had the same problem and i had even checked the the date and time went all the way to the apple store for help and the genius guy just rest the date and time and it worked just fine.

IPhone/iTunes Wifi sync doesn't work

Hi guys,
I don't even have hope to solve this problem anymore but I guess I should post this anyway and show apple the crap software they're giving us.
I'm on Lion 10.7.4 (iTunes 10.6.1) and, after upgrading my iPhone 4 to iOS 5.1.1, my Wifi sync with iTunes stopped working. Out of nowhere. Looking for an answer I started digging on apple foruns and found out there are dozens of threads discussing the problem and literally hundreds of possible solutions. I've tried the following:
- Restart iTunes and iPhone (full power cycle).
- Check the "Sync over Wifi" option on iTunes when iPhone is connected using cable
- Uncheck the "Block iPhone, iPod and iPad from automatically sync" on iTunes > preferences > devices.
- Restart Router
- Reinstalling iTunes
- Restore iPhone
- Move to trash "com.apple.iTunes" and "MobileDevices.framework" files. Restart Mac after.
- Make Airport on Mac and iPhone forget the saved networks and reconfig them
- Open ports on router 123 (all), 3689 (TCP) and 5353 (UDP)
- Disable and enable uPnP on router
- Install Remote app
- Use "Release Liase" option on iPhone under Settings > General > Network > Wifi > Blue Arrow
NONE solved it. I gave up. Apple *****.
Interesting behaviours:
- Remote app doesn't work at all. I can't use it under Home Sharing or that code thing. My phone and Mac simple can't see each other anymore.
- iPhone conects fine using cable. Everything is working and, when I pull out the cable, iPhone vanish from the list. Even with the Wifi option enabled.
So, if any of you can solve it, you will have a place in heaven. And in Apple developing team, probably.
Thank you!

Hi guys,
As I suspected, none of the previous solutions worked. I strongly believe this is some crap in iOS 5.1.1 OR iTunes 10.6.1. More precisely: this is APPLE fault, not something we did wrong or didn't do.
My Wifi sync worked great before this updates (Lion 10.7.2 and iOS 5.0). I can't isolate the problem because I did both updates in less than 24h from one another. Now I'm back to cable and I think I'll still be until Mountain Lion is out.
@rodrigonewtonI sent apple my feedback. Basically everything I wrote here. And I can't connect bluetooth either. Luckily I barely use bluetooth on my Mac.
@ou812ManySushi Lucky you! I'd already tried this without success. What is your iTunes and iOS?
@joejohns90 Doesn't work here, the option is ALWAYS greyed, waiting for my Mac to do something. The only way the "sync over Wifi" button work is pluging the cable. Ironic, isn't it?
Anyway, thanks for the feedbacks guys!

Wifi driver doesn't work properly

HI,I've installed W8.1 instead of W7 but Wifi Dosen't work as a reight Way The Wi-Fi works for then depends on the work and then worked for againe
this affects my Job if i download anything,it stop loading continuesly.
I've tried W8 and the same problem but it works truely with w7.
what should i do for making it works truely with W8.1.
Sorry length of e-mail.

vn7571g_user,
Sorry to hear that you are not having the best possible experience with your new notebook. I'd like to try and address a few of your concerns that you have listed and see if there are some things we can resolve for you.
1. Wifi doesn't work properly:
I see that you have posted in a couple other threads (1st, 2nd) regarding wireless issues with this notebook. We can gladly check this unit at the repair depot for you if you are not keen on changing the card out, PM me the following information and I will see what I can do for you:
SNID or serial number
Contact name
Contact number
Email address
Shipping address
Purchase date
2. Wifi doesn't work after switching on and off 'Airplane mode'
If you have already tried to install/update the drivers, it could be a Windows issue. You can attempt a refresh to see if that helps resolve it.
3. Trackpad response is terrible
This notebook uses a precision touchpad possibly, but since it uses Synaptics drivers you have a couple options:
You can change the way that the touchpad works.
It says Windows 7, but you can see if you have this option in the touchpad settings and see if it helps you out.
4. Speakers jar
Do you have the same issue without the Dolby turned on?
5. Num-Lock is 'Off' after every sleep session
Here is a Microsoft article that discusses this feature. You can follow the steps that they list if you would like.
6. Keyboard-backlight setting is 'On' after every sleep session
The backlit keyboard is working as designed. Here is an article with some FAQ about the backlit keyboard to help customers understand its functionality a bit more.
A couple final thoughts:
Did the issue(s) you are having occur before or after Windows updates, sometime a bad installation of an update can cause all sorts of things to happen.
Worst case, you can always try to restore to factory defaults and test all these things before applying updates or installing any applications or programs.

WIFI pairing doesn't work

I can't seem to make this awesome feature work
I find it awesome, because my goal is to use the Z1 Compact Wirelessly as much as possible - which limits the need to open and close the delicate port opening. also i just hate Micro USB ...
WIFI paring (Network Configuration) require a couple of things to work (apparently):
- Windows Firewall (or other) has to be enabled
- UPnP Framework Rule has to be enabled in Windows Firewall (actually named Portable Device Connection)
- UPnP Device Host Service has to be enabled and running (i guess)
- Network Discovery has to be enabled
- more ?? maybe a sacrificed chicken ??
Well... After doing all that, it still doesn't work -- I guess it's not worth the effort ??
A much simpler solution i've found, is to install "SAMBA FileSharing"
https://play.google.com/store/apps/details?id=com.funkyfresh.samba - which works perfectly !

Self-replying, so
Dear Me,
1° To undo the pairing, navigate to folder storage/emulated/0 using "ES File Explorer" and delete file named after the computer you want un-pair.
2° Redo the pairing.
brgds, Me Again
[Edit]
Seems to be ok for now, at least the devices still show on the list.
Would be nice to have shortcut(s) for connecting to pc / laptop on the home screen and / or smart connecting, but could not find either. I must have missed it surely it can not be only accessible via settings, can it?
[/Edit]

I try everything but the wifi sync doesn't work, please help...

Hello,
I tried:
Restore my iPhone 4 (iOS 5.1.1)
Check router settings (tried default settings and reset also)
Check everything in iTunes
Connect to different wifi
Upgrade my MacBook Air to Mountain Lion (1.0.8.0)
....etc.
I have everything latest, I read almost everything about it, tried tweaks, but none of this doesn't work.
When I've got my iPhone connected to Mac through USB with wifi enabled, sync work well...
Everything worked fine all the time and from day to another it doesn't work anymore.
It's a pain in the ***, I have already lost my mind. Nothing work.
I appreciate any help from you guys, thank you very much
(sorry for english, I'm czech)

I probably do not understand your question. But try this, maybe this is what you want. Try iCloud on your iPhone.
Tap Settings App > Wi-Fi > turn it ON. Then go back to Settings and below General tap > iCloud. Make sure your account is there, turn ON what you like and then at bottom select Storage & Backup. Hopefully this will help you.

Wifi scanning doesn't work on HP 5110 e-all-in-one

I have windows 7 netbook. I have had to install the printer manually because the installation software gets stuck at the finding printer on wifi stage (progress bar goes to completion but then freezes and only way to stop is to restart the netbook). So the printer has added itself to wifi succesfully, using the onscreen wizard on the printer itself. I have added the printer to my pc for wifi printing manually using the ip address, and then downloaded the drivers by usb cable connection which automatically added all the drivers (I thought). So printing works over wifi but scanning only works by using USB cable. I would like to be able to scan over wifi too. Any ideas on whether there are additional drivers to install for that or if there is any sort of manual set up I can do?
Thanks

HI @Rprine , and welcome to the HP Forums!
I see you're experiencing driver issues. I would like to help.
Are you able to make a copy?
I would recommend performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also recommend downloading and running the HP Print and Scan Doctor.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Finally gave up and returned the iPad because WiFi "just doesn't work."

My iPad wouldn't connect to public hotspots and performed poorly even in my house where my iPhone, MacBook Pro and iMac all work just fine. After hours of monkeying with settings and renaming my network and trying other suggestions generously offered here, I just gave up and returned it.
The "specialist" at the Apple store informed me of the 10% restocking fee. I countered that I wasn't returning it because I had changed my mind, but because it doesn't work properly.
I was told that he'd have to get approval from the manager of the "Geniuses." They refunded the total amount, but if I hadn't insisted, I'd have been out fifty bucks.
Apple has long touted the "it just works" appeal of its products, but this time they've clearly dropped the ball.
I'd been considering getting for my aging parents because it seemed like a simple way to get online without overwhelming them too many choices. I've since changed my mind.

When I realized that this was a widespread problem I decided to cut my losses. This might have easily turned into a expanding waste of time.
I'll consider buying a new iPad when the kinks have been worked out. Maybe the 3G option isn't such a bad idea, I now think it could be useful in pinch.
I'm glad to have been able to consult this discussion board.

WiFi suddenly doesn't work. Connection time exceeded

Hi
A few days ago my WiFi connection in my Mac Book PRO 13'' with Mac OS X Lion 10.7.4 worked fine but today I can't connect to my WiFi. I get the error:
Connection time exceeded
I didn't change anything... I've tried deleting the default connection, deleting System Configuration folder in /Library/Preferences but it doesn't wok. Any idea?
Thank you

I do not know whether or not it will address your issue, but I would reset the SMC. Since it is the same problem on other networks, it appears the problem is related to your computer.
Barry

Wifi suddenly doesn't work from time to time (OSX 10.9.5)

Hello everyone,
I am having this problem a while now and I have tried many different fixes, which all didn't help me.
My Problem is that sometimes my MBPr (Late 2013) just stops the WiFi connectivity. Sometimes it works and sometimes it doesn't. It's completely random and extremely annoying. When I connect to any other WiFi network, it's the same thing. OS X doesn't give me some real error either. It just says that I am supposed to go nearer to the source of signal, which is nonsense, since the router is directly besides my MacBook. Furthermore, since this problem is independent from the used network, it has to be a problem of the laptop.
Funnily, after a while, WiFi works like nothing happened.
Do you guys have any idea?

I do not know whether or not it will address your issue, but I would reset the SMC. Since it is the same problem on other networks, it appears the problem is related to your computer.
Barry

Bold 9700 - WiFi connection doesn't work after update

Hello,
I updated my Bold 9700 to OS 6.0 bundle 2475 . I'm using my phone connected to a wifi router that worked fine before update but now is unable to communicate.
The connection is ok (I can select my network in the list and the phone is connected) but the "Blackberry" icon doesn't appear on the main screen near the wifi icon and it's impossible to connect the phone to Internet or email.
Using 3G connection all work fine but I'm abroad and normally I use this wifi network on my apartment that works fine (I'm also using an iPhone that works great, it means that the network is ok).
Thanks, regards

No, just close it; it's a bug of this version, with Vodafone and other carriers, at least here in Italy.
Here we have another bug with the version: if you are connected in 3G and perform a search with Google Local BIS disconnects and the search returns an error; if you are connected with GPRS it works fine.
Can you experience this bug with your Vodafone?
Bye!

[SOLVED] MBA 5,2 (2012) wifi powersave doesn't work

Hi all,
Though wifi works out of the box, powersaving doesn't on my MBA 5,2 (late 2012). The situation dates back to at least the 3.7.* kernels, and possibly before. Is this a known issue? Or perhaps is it solvable?
Many thanks!
# uname -a
Linux Arch 3.8.3-2-ARCH #1 SMP PREEMPT Sun Mar 17 13:04:22 CET 2013 x86_64 GNU/Linux
$ lspci | grep -i net
02:00.0 Network controller: Broadcom Corporation BCM43224 802.11a/b/g/n (rev 01)
# iwconfig
lo no wireless extensions.
wlan0 IEEE 802.11abgn ESSID:""
Mode:Managed Frequency:2.462 GHz Access Point:
Bit Rate=65 Mb/s Tx-Power=19 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=39/70 Signal level=-71 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:3085 Invalid misc:5211 Missed beacon:0
# iw dev wlan0 set power_save on
command failed: Operation not supported (-95)
# iw dev wlan0 get power_save
Power save: off
# dmesg | grep -e bcma | less
[ 4.673207] bcma-pci-bridge 0000:02:00.0: enabling device (0000 -> 0002)
[ 4.673364] bcma: bus0: Found chip with id 0xA8D8, rev 0x01 and package 0x08
[ 4.673448] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 4.673529] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 4.673586] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 4.843255] bcma: bus0: Bus registered
[ 5.790551] brcmsmac bcma0:0: mfg 4bf core 812 rev 23 class 0 irq 17
[ 6.793389] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 6.793432] brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement)
[ 18.217983] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 18.218094] brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement)
[ 18.285286] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 18.285396] brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement)
[ 24.240431] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated
[ 24.240524] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[ 24.240623] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 30.609801] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
[13331.883101] brcmsmac bcma0:0: START: tid 1 is not agg'able
Last edited by LiamMcCalloway (2013-03-24 23:44:52)

Thanks for your pointers!
lspci -v
02:00.0 Network controller: Broadcom Corporation BCM43224 802.11a/b/g/n (rev 01)
Subsystem: Apple Inc. Device 00e9
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at a0400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Capabilities: [58] Vendor Specific Information: Len=78 <?>
Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [d0] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [13c] Virtual Channel
Capabilities: [160] Device Serial Number
Capabilities: [16c] Power Budgeting <?>
Kernel driver in use: bcma-pci-bridge
bcma-pci-bridge seems to be a driver, not a module so modinfo does give anything.
bcma and brcmsmac are both loaded, as are the modules modinfo say they depend on (mac80211,bcma,brcmutil,cfg80211,cordic)
modinfo -p yields nothing for either bcma or brcmsmac, so there can be no parameters to pass on the kernel, I think.
I tried unloading and reloading the modules, to no avail....

ITunes wifi sync doesn't work since moving Mac to a new Airport

Hi,
I recently moved my Mac mini which acts as an iTunes 'server' for all the other devices/computers that I have at home from being Ethernet connected to the airport base station in the middle of my network (the Time Capsule described below) to the Airport Extreme at the end of my network. Since moving this, all my devices continue to show in iTunes but if I try and initiate a wifi sync it spends 10 to 20 seconds trying to find the device and then fails (the device then shows "Sync will restart when mini becomes available" or similar). If I completely reboot all my airport base stations it seems to start working for a while. For info, I have tried disabling the Mac mini firewall but it has no impact. Sync works perfectly with a cable and used to work pretty well (but not 100% of the time) before I moved the Mac mini.
Any help or ideas would be really appreciated, my network layout is described below:
My network cosiest of a Sky TV broadband ADSL model & wifi router which provides internet and DHCP using 802.11b/g.
Connected to that via a long Ethernet cable I have a latest gen. Airport Express in a different part of the house creating a 2.4Ghz 802.11n only network with 'Allow this network to be extended' checked.
I then have a 1st gen. Time Capsule extending that network and an Airport Extreme (not the latest version) which extends the network further. If I look at the iPad Airport Utility app I see this network as a long, straight line where each extends the previous.
I have all the Apple Airport devices in 'Bridge mode' so that the Sky device is providing DHCP for the entire network.
I have an old-ish Mac Mini (Intel single core) running a fully updated version of snow leopard (can't update to Lion on a single core) with the latest version of iTunes. I have several iOS 5 devices (fully updated).
Regards,
Phillip.

Just noticed a typo: I moved FROM plugged into the middle of the network to the END of the network and then plugged into that base stations ethernet.

Wifi connection doesn´t work in Mac Book 5.1 with windows 7 x86 via bootcamp 4

I have installed Bootcamp 4 drivers and all features are fully working except the Wireless conncetion.
The airport wifi scans and works but i click connect to my wifi and i get an error saying that it´s not possible to connect.
In the Mac OS X side wifi works perfectly and in an other computer with Win7 works the connection..
Anyone know what can i do?
i tried reinstalling everything (bootcamp drivers, Windows7 OS, installing other version of boot camp)but i can´t fix this problem
thanks for helping

It depends on your Mac model. Please see System requirements to install Windows on your Mac via Boot Camp - Apple Support.
For example, for a 13 inch 2012 MBP it is Boot Camp Support Software 4.1.4586.
Post Date: Mar 14, 2013
File Size: 414.74 MB
System Requirements
Mac mini (Late 2012)
Mac mini Server (Late 2012)
MacBook Pro (Retina, 13-in, Mid 2012)
iMac (21.5-in, Late 2012)
iMac (27-in, Late 2012)
Windows 7

OS update 2.1.0.1032 now my wifi connection doesn't work properly HELP

My wifi worked perfectly until the recent OS update. Now I can only get a connection to last for minutes before it stops working. The green wifi signal will show but it won't actually work.
Is there anything I can do? Try to reload the OS update. I don't know if it makes a difference but I accidentally pressed the standby mode button during the loading of the update.

I would say my receiver is 80% as sensitive as it was on 2.0 but had no problems frequently disconnecting and it reconnects as soon as I move back nearer. You should try the usual router changes...
Make sure if you are on 802.11n (wireless N) you have encryption set to WPA2 (AES)
Or change to 802.11g
Or debrick the playbook in extreme cases and reload the OS.

Wifi, Arsenal , doesn't work.

Similar Messages

Maybe you are looking for