WiFi at Caribou Coffee ends up with lost connection -1005

I just tried to use iPhone at local CC adn the message was Safari couldn't open the page = "lost network connection" NSURLErrorDomain:-1005"
the phone was trying to log on at CC but then it came up with the url =
http://cariboulogin.wanderingwifi.com:80/caribou/Login
that doesn't happen with my Mac Book Pro
any ideas?

Wifi login at Caribou is managed by Wandering Wifi. At present, the login is not set to handle iPhones. The stores have a tech support number to call, and tech support can connect you if you give them your MAC address. Tech support can walk you through it. They are working on an easier solution.

Similar Messages

Flash Player download keeps failing with lost connection and then gives up. satellite Internet connection

Win XP. Firefox 34.0.5 (latest)
The Flash Player download keeps failing with lost connection and then gives up.I am on a satellite Internet connection.
It seems to be extremely slow even when loading the installer which is only 1MB. Then when I run the installer and it starts to download the installation there are frequent messages about losing the connection and then finally gives up.
I have had problems with other software failing when I am on a satellite link. This is most likely because of the huge latency which may be taken as a link failure. Ping times are typically 800ms but can be 2000ms sometimes!

Hello,
The online shim installer, which you are using actually downloads and installs Flash Player silently in the background. If your satelite connection is experiencing latency issues it could result in the failure to download. Please try the full installer posted at the bottom of the Installation problems | Flash Player | Windows page, in the 'Still having problems' section.
Maria

SGE2010: stack member reboots with 'Lost connection with unit x reason 0x20097'

Hi All,
Over the last 2 months we've had repeated issues with SGE2010 units in a stacking configuration rebooting randomly.
Prior to a member reboot occuring we see the following logging message via SNMP Trap on on the unit's internal logging via the GUI:
'Lost connection with unit x reason 0x20097'
We've made attempts at consulting Linksys/Cisco support regarding this 'feature' but aren't really getting anywhere with 1st level support who don't seem to understand much about supporting the device.
The layout is thus:
* 3 x SGE2010 units all of the same firmware version (3.0.1.0)
* Stack configured in a ring topology
* Cat6 cabling used on the stacking ports
* 7 VLAN's
* Mixture of trunking + VLAN tagging & standard ports configured
We've tried the following:
* Swapping out the member that reboots with another, but we get the same behaviour even with a new unit after about three weeks of running
* Changing the cabling between the members, same behaviour
* Upgrading the firmware from a previous version to the current 3.0.1.0
I'm not really keen on factory resetting the whole show & reconfiguring 144 ports by hand (the downtime will cost my users dearly, not to mention carpal tunnel from overuse of the web GUI)
Is anyone able to clarify what a reason code of 0x20097 is?
At least understanding what the error is may allow us to better understand the condition in which the switch decides it must reboot.

Hi Lee,
The small Business support center (SBSC) is the place to get this problem resolved. If the technician needs to get the error code looked at by a Product Engineer, then they have to escalate your call into the bowels of Cisco development.
Please call into the SBSC again, and try to reopen or open a new case. This call has to be resolved or escalated.
You have the ability to say to the technician ,
1. "I want this call escalated" or
2. " I want to speak to the Manager On Duty to esclatate the call"
If you have any issues, please let me know.
My email address is dhornste at cisco.com (remove the spaces and replace at with @)
here is a link to get hopefully a local number to call into the SBSC.
http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
regards Dave

Never ending problems with extreme connection to express

I have an Apple Extreme that is about 5 years old along with 3 newer (1 - 2 years old) and an Apple TV which I bought last year. All units are N compatible. I use one extreme for extending my network, one for wireless printing and one for audio. I'm constantly dealing with one or more of the express units just dropping the connection. Right now, the unit I use for audio won't even let me reconnect after resetting it. I'm sure it is something I'm doing in the settings but cannot figure it out. I'm also wanting to use each of the units as an extender as my 2 story home is large (115 year old Victorian) which is why I have so many units. I'm at 10.9.5 and scared to go to Yosemite because of the wifi connections issues I've read about. Any help is appreciated as I'm pretty frustrated.

Sorry, I have 3 newer airport express units.

I join the ranks of those with lost connectivity after 4.2...

I too can join the ranks of those who have upgraded to iOS 4.2 and having issues. My 64GB 3G iPad now has WiFi only connection. Shows "No Service" for 3G.
I called Apple's tech folks who, predictably, blamed the SIM card being lose or out of place. Of course this only became a problem after having upgraded (really downgraded??) to 4.2. They have no solution otherwise.
When will Apple release products/software that "just work??" Asking to much there Mr. Jobs?? Recall that pesky iPhone 4 signal strength issue?? It's still fresh in folks minds and this will exacerbate the problem more.

After any reboot, my iPad 3G always "loses" 3G connectivity, can't find the SIM, and doesn't know the cellular data phone #. Every time. While your problem might be related to 4.2, before you conclude that for sure, try the following:
1. Reboot the iPad
2. Turn OFF Wi-Fi
3. Turn ON Cellular Data (even though Settings->General->About and/or Settings->Cellular Data->View Account said it couldn't connect or find the 3G stuff)
4. Wait a few seconds to see if you get the AT&T signal strength bars then bring up Safari to force a data transfer
You should be up. (Unless you really are having 4.2 problems). This problem happens to me all the time, and I haven't (yet) made the 4.2 upgrade. But (for me, so far) this sequence of actions forces the iPad to "rediscover" the information on the AT&T SIM card. Works every time.

Since the upgrade to CC 2014 via Creative Cloud, I'm ending up with both version of all my Adobe CC products, and I lost my plugins in Photoshop CC 2014.

Hello
Since the upgrade to CC 2014 via Creative Cloud, I'm ending up with both version of all my Adobe CC products, and I lost my plugins in Photoshop CC 2014.
How can I fix this ?

I did it by going to my old Photoshop CC Plugins folder and copying it aand then pasteing it in the Phtoshop CC 2014 folder. All mine came back and worked.

Somehow my wife has ended up with some of my apps on her iPhone, and I have some of her apps on my iPhone. So, when I update apps on my phone, some of them ask me for her apple ID password. How do I get her apps off my phone.

Somehow my wife has ended up with some of my apps on her iPhone, and I have some of her apps on my iPhone. So, when I update apps on my phone, some of them ask me for her apple ID password. How do I get her apps off my phone.

Do you guys use the same computer with itunes on it? And the best way to get them off is to go into the Setting>Itunes & App Store and sign out of her appleid if it's listed there. Also just delete all of the apps from her appleid off your phone.

HT1386 I recently purchased an album from itunes. When I subsequently sync'ed my ipod touch I ended up with all tracks of that album doubled on my ipod and I lost all my playlists. Subsequent syncing has not fixed it. Any ideas what to try?

I recently purchased an album from itunes. When I subsequently sync'ed my ipod touch I ended up with all tracks of that album doubled on my ipod and I lost all my playlists. Subsequent syncing has not fixed it. Any ideas what to try?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
You said:
No, I do not want to "factory reset" my iPod. No I do not wish to do anything crazy long or hard to fix this.
That may be necessary, It is not what you want to do/not do but what is required to resolve your problem.

HT201210 I was in the middle of installing the new update using the wifi at a local restaurant when I lost the wifi signal and my iPhone shut down, and now I can't get into the phone. I only get the iTunes logo with the cable pic. What are my options now?

I was in the middle of installing the new update using the wifi at a local restaurant when I lost the wifi signal and my iPhone shut down, and now I can't get into the phone. I only get the iTunes logo with the cable pic. What are my options now?

Your only option is to connect your iPhone to your computer via USB (as the diagram indicates) and restore using iTunes.

Probably asked and answered a million times but my laptop died and my boyfriend and i are now sharing a computer when i went to back up my contacts i ended up with all of his! Is there a way to get them off and how do i prevent this from happening again?

probably asked and answered a million times but laptop died and my boyfriend and i are now sharing a computer when i went to back up my contacts i ended up with all of his? Is there a way to get them off without deleting each one? Also how do i prevent this from happening again? can someone direct me to some info on multiple phones on one itunes i am lost.

Hey there 79usma79!
I have a couple of articles for you that can help you troubleshoot the issues you are seeing with iTunes on Windows XP. The first is a general troubleshooting article, which can be found right here:
iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/TS1421
This article can help you find out if there are any conflicts between your copy of Windows XP and iTunes, and can tell you what to do if there are. Before going down the troubleshooting route though, you should take a look at this article, which can help you back up your entire iTunes library to an external hard drive, so if this issue is recurring, you will be able to restore from that backup and will not have to worry about losing your playlists or music again:
iTunes: Back up your iTunes library by copying to an external hard drive
http://support.apple.com/kb/HT1751
Thanks for using the Apple Support Communities!
Cheers,
Braden

I can no longer log into my ichat linked to my gmail. right after opening up ichat, receive the following message: lost connection with jabber. the server has unexpectedly disconnected.

i can no longer log into my ichat linked to my gmail. right after opening up ichat, receive the following message: lost connection with jabber. the server has unexpectedly disconnected. how to troubleshoot? thanks.

Hi,
There can be many reasons why the Login is "up the creek".
Any break in the network at your end whilst logged in will cause an issue.
A sort of discrepancy between what iChat thinks the state should be and what the server thinks.
If they don't agree the server will refuse to accept.
A Crash at the server end which does not log you out properly will also do it.
Any file at any time can be come corrupted.
Luckily with the iChat .plists they are recreated if removed with an iChat Restart.
If it were AIM you can also get your Account Suspended and this will not log you in.
(It tends to happen from Chat rooms where people notify AIM about bad behaviour (as they see it) and you have to apply to get Un-suspended).
Most of the big IM services use multiple servers.
Sometimes these go out of Sync.
In the case of AIM this happens when they remove Old unused Screen Names from people's Buddy List prior to making them available for re-registration. I am not sure if this happens at Google.
You seem to be talking about an account that has worked at Work and having new computer at home.
As I mentioned the Priority thing you have not said that it has coincided with the new computer logging in (this will kick the work Computer out of Google whether you are logged in on the Web Mail page or in iChat)
IN addition to that iChat stays partially logged in for Off Line IMs
This is done in the background by a support app called iChatAgent
If your Computer is ON but ichat is not started people can still send you Messages.
Instead of saving these on the server until you login iChat will start up.
Depending if the home Mac is effecting the Work Login it may be holding sway over your Login.
Using your girlfriend's login may have booted her Off Line where she normally uses the name/login.
The AIM Side can be specifically set to allow Multiple Logins and therefore NOT allow them. If this happens you get a warning and messages to do something about it.
You do not get these in any Jabber or Google Login as the Priority setting is supposed to take care of it.
If the Login works at the Web Mail Login and on one computer then the .plist on the work computer is the most likely issue.
There is a small chance that a Corrupt Buddy Pic (Home Folder/Library/Caches/com.apple.iChat/Pictures) may be the cause.
Set this folder to icon view and also use the Finder's View Menu > Show View Options and select icon view.
This should show all pics as their icon.
Check that all display properly.
At this point I would try a COMBO version update install of the last Update you did over what you have.
This often corrects hard to trace things
The 10.5.8 COMBO is here
11:28 PM Monday; June 20, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Lost connection with server

For about two days now, the bbm application has refused to launch. It has been writing lost connection with server....can any one please help! It's really urgent

Hi and Welcome to the Community!
With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (step should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive
2) Reboot
Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. IF this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should contact your mobile service provider for formal support.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

E5: Ovi Suite has lost connection with your device...

I am trying to update the software on my E5 using OVI suite but I keep getting an error during the install phase (after backup). The following error and instructions are displayed in the OVI suite window but makes no difference when I follow these instructions (just end up back with the same error).
"Nokia Ovi Suite has lost connection with your device. Follow these steps to help reconnect your device:
1. Remove USB cable from your device.
2. Restart the device (turn off and on again).
3. Re-insert the USB cable.
4. Click 'Ok' below to continue updating."
Current E5 software version is 042.007.
I am trying to update to E5 software v. 043.115
Any ideas?

Yep having the same issue. Just got a replacement handset due to the random restarting issue, soon after setting up the new handset I get a message on phone saying software update is available. Both OVI suite and Nokia software updater say version 43.115 is available (about 200mb in size), I currently have the same version as you 42.007. It claims to do a lot of improvements to the handset. The update downloads fine but when it comes to installing I keep getting the same issue. Phone simply will not restart automatically and the update restarts then fails at the same point over and over. Had the same problem with my previous handset.
I spoke with my network provider to see if it was an issue with the handset needing firmware specific to them but they said no it is an issue with the firmware itself and has been happening to everyone since its release!!! They said I should not download it until Nokia has resolved the issues with it. But how do I know when that will happen as I cannot find anything put out by Nokia stating there is an issue or anywhere on web forums saying there is actually a problem.

My Airport Time Capsule only works when I turn off and turn on, but I think this may end up with the unit. What can this happening and how to solve?

Time Capsule Airport
Hello to all, good day, sorry my english google, but it is the tool I have at the moment. I'm having trouble with my Time Capsule Airport, I made all the settings according to the manual, but there has been a connection problem with my iMac. When I finish my work I turn off the imac and then again when they return to work and care, it can not connect to Time Capsule Airport, making it impossible to remove the files and make back up by Time Machine only works when I turn off and turn on the Airport Time Capsule , but I think this may end up with the unit. What can this happening and how to solve? Thank you.
Olá a todos, bom dia, desculpe meu inglês google, mas é a ferramenta que tenho no momento. Estou tendo dificuldades com a minha Airport Time Capsule, fiz todas as configurações de acordo com o manual, mas tem existido um problema de conexão com meu iMac. Quando termino meus trabalhos desligo o imac e depois quando retorno pra trabalhar novamente e ligo, ele não se conecta a Airport Time Capsule, impossibilitando retirar os arquivos e fazer o back-up pelo Time Machine, só funciona quando desligo e ligo a Airport Time Capsule, mas acho que isso pode acabar com o aparelho. O que pode esta acontecendo e como resolver? Obrigado.

This is easier to do with pictures perhaps.. since we do not share a common language and machine translation leaves a lot to be desired.
In the airport utility bring up your Time Capsule.
Simply post the screenshots here.
So here is mine.
Click on the Edit button and give us the Internet and Wireless and Network tab..
eg.
Please also make sure you are set to ipv6 in your wireless or ethernet .. whichever is used.. and do tell which.
This is wifi in your computer.
The following are important..
DO not use long names with spaces and non-alphanumeric names.
Use short names, no spaces and pure alphanumeric.
eg TC name. TCgen5
Wireless name TCwifi
Use WPA2 Personal security with 10-20 character pure alphanumeric password.
read apple instructions to help with TM and TC.. they did finally admit it has issues in Mavericks.
OS X Mavericks: Time Machine problems
Mount the TC manually in finder.
AFP://TCgen5.local
When asked for the password .. that is the disk access password and save it in the keychain.
Reset Time Machine
See A4 here. http://pondini.org/TM/Troubleshooting.html

Why has my ipad lost connectivity to the AT&T cellular data network after upgrading to iOS 8.1.2? My iPad is model #MD367LL/A, 32 GB WIFI + Cellular, about 2-1/2 years old.

Why has my ipad lost connectivity to the AT&T cellular data network after upgrading to iOS 8.1.2? My iPad is model #MD367LL/A, 32 GB WIFI + Cellular, about 2-1/2 years old. It;s been working perfectly up until now. I have no problem on my home WIFI, or through personal hotspot working through my iPhone 5.
I have worked with AT&T, replaced the SIM card with a new one, and done a backup/restore to factory settings, all with the same result that when I turn Cellular
Data on, with or without Enable LTE, it goes into "searching" mode, or reports "no service". My iPhone 5 works perfectly on iOS 8.1.2, on Cellular. I've browsed the blogs and have tried Apple's suggested fix, all to no result.
Oddly enough, every once in a while I do get connected to the network for a short ime (minutes), but it always returns to "searching".
I've filed a report with Apple, along with a request that they contact me, but no results yet.
Help? (and thank you).

Hello razmee209. Thank you for your response. I spent the better part of yesterday working with Apple Support. They tried their best, to include backing up photos to my HP laptop, backing up the iPad to iCloud, then resetting the iPad in total. Same problem. I restored from the cloud to recover my apps, same problem.
AT&T installed a new sim card - same problem. I spent time with AT&T Support yesterday, too. In both cases, (Apple and AT&T) the support techs who worked with me were extremely polite, courteous and helpful to the best of their abilities, but I think the problem lies deeper, and nobody at Apple is admitting they have a problem with iOS 8, that I'm aware of.
I didn't have this issue before I upgraded to iOS 8.1.2.
Everything else with the iPad works fine: WIFI, Personal Hotspot, email, all my apps, etc.
In browsing the web for this issue I see that many other folks have the same problem. I filed a report with Apple this morning, requesting that they contact me, but no word yet. I was going to go to iPhone 6, and had been considering the iPad Air 2, but I see reports of this problem with those units as well.
At this point I don't think I'll be spending any more money with Apple, at least not till this issue is resolved.
Thanks again for your response and suggestions.

WiFi at Caribou Coffee ends up with lost connection -1005

Similar Messages

Maybe you are looking for