Wifi Authentication Not Coming Up

Hi,
I have the new MBP running 10.8.1 and I'm having trouble connecting to my school's wifi.
The problem is that once I connect to the school's wifi, I need to log in the network. However, once I connect and open up safari, the log-in page doesn't come up.
Does anyone have a solution for this?
Thanks.

What OS are running on the Mac? Are you running OS 10.6.8? That is the minimum for WiFi sync.
Did you click on Apply after selecting the WiFi sync option in iTunes on the Mac?
I know that you are a "search the Internet" kind of guy from reading your other post - but you did go through all of this procedure in order to get WiFi syncing set up?
iOS: Syncing with iTunes
If you did all of this - restart all devices and try again.

Similar Messages

  • WiFi turning off when Ethernet connected, and not coming back on

    Since about last Tuesday (possibly when I updated to Safari 7.0.6), whenever I connect my MacBook Air (2011) to ethernet, my WiFi turns off. When I disconnect the ethernet, the WiFi does not turn back on, which makes this an annoying problem. If I try to manually turn it on while Ethernet is still connected, it does the scanning animation a few times, and then turns back off. Without the ethernet, once WiFi is turned back on, it works just fine.  I'm using both the Apple USB to Ethernet adapter and a StarTech Thunderbolt hub with Gigabit ethernet, and this happens with both.  Everything is up to date, and the only change that coincided with this new behavior is Safari, but I don't remember if I updated it before of after the problem appeared, and I may not have noticed the problem for a few days as I don't often use my mac away from a wired connection.
    Is this a known problem? Any known solution? When I search for it, all I find are people looking for ways to make the WiFi automatically toggle opposite the Ethernet, no one complaining that it's happening on its own.

    Why are you turning cellular data off when you get home? If you have wifi at home, it will connect to the phone. Then, once you leave home and get out of range of the wifi, cellular data should connect automatically, you wouldn't need to turn it back on. Turning wifi off is really not necessary unless you are using it as a battery saving feature. I leave my wifi turned on all the time, as well as cellular data, and my battery lasts for quite a long time.

  • VFL Speaker sound from both the front speakers while FR sound is not coming out at all.

    I have a creative gigaworks s750 connected to a xtreme gamer sound card. The system was working absolutely fine but now it has started behaving very strangely; system is playing back Front Left Speaker sound from both the front speakers while Front Right sound is not coming out at all. If i click the front right speaker in audio console speaker setup wizard, no sound comes. However when i click the front left speaker, sound comes out of both speakers. I counter checked it with playing 5.1 dts movie and muting all the speakers except the front left one from ac3 filter, sound came out of both the front speakers. However when i muted all the channel except the front right, no sound was coming out of front right speaker.
    Message Edited by hussain on 06-10-2009 10:26 PM

    Just want to add another relieved reader of this thread.  I had lost the sound to my speakers even though I had sound to headphones. I was convinced it was a damaged headphone jack because I had pushed the headphone plug in harder the last evening when my wife complained that she could still hear the speakers while I listened with the headphones.  The next morning--no speaker sound.
    I spent a few hours searching the web to see how to disassemble a satellite A505 and get to the jack.  But I wasn't even sure I could get a proper replacement jack that fit, and I was concerned that small damage, say to the ribbon connectors could render the computer useless--a large price to pay for just missing audio.  
    Fortunately, I stumbled onto this thread and I recalled I had put the unit to sleep the night before--something I don't usually do, but I didn't want all the Chrome web sites to have to reload so I just put it to sleep.
    When I put it to sleep again and fired it up--Sound!  I am so glad to find this solution so I just want to let people know it remains a viable option.
    Doug

  • L2L VPN not coming up

    I am using GNS3 to build a tunnel between an ASA and a router.
    Below are my configurations but the tunnel is not coming, can anyone spot what's wrong with my configs? Or could it be because of bugs on GNS3?
    ciscoasa# sho running-config crypto
    crypto ipsec transform-set MySET esp-aes esp-sha-hmac
    access-list VPN_Traffic extended permit ip 12.123.15.0 255.255.255.0 192.168.10.0 255.255.255.0
    crypto map SampleVPN 100 match address VPN_Traffic
    crypto map SampleVPN 100 set peer 10.123.5.2
    crypto map SampleVPN 100 set transform-set MySET
    crypto map SampleVPN interface outside
    crypto isakmp enable outside
    crypto isakmp policy 100
    authentication pre-share
    encryption 3des
    hash md5
    group 2
    lifetime 86400
    crypto isakmp policy 65535
    authentication pre-share
    encryption 3des
    hash sha
    group 2
    lifetime 86400
    tunnel-group VPN type ipsec-l2l
    tunnel-group VPN ipsec-attributes
    pre-shared-key 1234
    R1#sho run | sec crypto
    crypto isakmp policy 100
    encr 3des
    hash md5
    authentication pre-share
    group 2
    crypto isakmp key 1234 address 12.152.45.2 no-xauth
    crypto ipsec transform-set MySET esp-aes esp-sha-hmac
    ip access-list extended VPN_Traffic
    permit ip 192.168.10.0 0.0.0.255 12.123.15.0 0.0.0.255
    crypto map VPN 100 ipsec-isakmp
    set peer 12.152.45.2
    set transform-set MySET
    match address VPN_Traffic
    interface f0/0
    crypto map VPN
    Here are the debugs from the router...
    *Feb 18 15:59:03.971: ISAKMP:(0): SA request profile is (NULL)
    *Feb 18 15:59:03.971: ISAKMP: Created a peer struct for 12.152.45.2, peer port 500
    *Feb 18 15:59:03.971: ISAKMP: New peer created peer = 0x65C73CCC peer_handle = 0x80000004
    *Feb 18 15:59:03.975: ISAKMP: Locking peer struct 0x65C73CCC, refcount 1 for isakmp_initiator
    *Feb 18 15:59:03.975: ISAKMP: local port 500, remote port 500
    *Feb 18 15:59:03.975: ISAKMP: set new node 0 to QM_IDLE
    *Feb 18 15:59:03.975: ISAKMP: Find a dup sa in the avl tree during calling isadb_insert sa = 6568F26C
    *Feb 18 15:59:03.979: ISAKMP:(0):Can not start Aggressive mode, trying Main mode.
    *Feb 18 15:59:03.979: ISAKMP:(0):found peer pre-shared key matching 12.152.45.2
    *Feb 18 15:59:03.983: ISAKMP:(0): constructed NAT-T vendor-rfc3947 ID
    *Feb 18 15:59:03.983: ISAKMP:(0): constructed NAT-T vendor-07 ID
    *Feb 18 15:59:03.983: ISAKMP:(0): constructed NAT-T vendor-03 ID
    *Feb 18 15:59:03.987: ISAKMP:(0): constructed NAT-T vendor-02 ID
    *Feb 18 15:59:03.987: ISAKMP:(0):Input = IKE_MESG_FROM_IPSEC, IKE_SA_REQ_MM
    *Feb 18 15:59:03.987: ISAKMP:(0):Old State = IKE_READY  New State = IKE_I_MM1
    *Feb 18 15:59:03.987: ISAKMP:(0): beginning Main Mode exchange
    *Feb 18 15:59:03.991: ISAKMP:(0): sending packet to 12.152.45.2 my_port 500 peer_port 500 (I) MM_NO_STATE
    *Feb 18 15:59:03.991: ISAKMP:(0):Sending an IKE IPv4 Packet......
    Success rate is 0 percent (0/5)
    R1#
    *Feb 18 15:59:13.991: ISAKMP:(0): retransmitting phase 1 MM_NO_STATE...
    *Feb 18 15:59:13.991: ISAKMP (0:0): incrementing error counter on sa, attempt 1 of 5: retransmit phase 1
    *Feb 18 15:59:13.991: ISAKMP:(0): retransmitting phase 1 MM_NO_STATE
    *Feb 18 15:59:13.995: ISAKMP:(0): sending packet to 12.152.45.2 my_port 500 peer_port 500 (I) MM_NO_STATE
    *Feb 18 15:59:13.995: ISAKMP:(0):Sending an IKE IPv4 Packet.
    *Feb 18 15:59:14.043: ISAKMP (0:0): received packet from 12.152.45.2 dport 500 sport 500 Global (I) MM_NO_STATE
    *Feb 18 15:59:14.047: ISAKMP:(0):Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH
    *Feb 18 15:59:14.047: ISAKMP:(0):Old State = IKE_I_MM1  New State = IKE_I_MM2
    *Feb 18 15:59:14.051: ISAKMP:(0): processing SA payload. message ID = 0
    *Feb 18 15:59:14.055: ISAKMP:(0): processing vendor id payload
    *Feb 18 15:59:14.055: ISAKMP:(0): vendor ID seems Unity/DPD but major 123 mismatch
    *Feb 18 15:59:14.055: ISAKMP:(0): vendor ID is NAT-T v2
    *Feb 18 15:59:14.055: ISAKMP:(0)
    R1#: processing vendor id payload
    *Feb 18 15:59:14.059: ISAKMP:(0): vendor ID seems Unity/DPD but major 194 mismatch
    *Feb 18 15:59:14.059: ISAKMP:(0):found peer pre-shared key matching 12.152.45.2
    *Feb 18 15:59:14.059: ISAKMP:(0): local preshared key found
    *Feb 18 15:59:14.059: ISAKMP : Scanning profiles for xauth ...
    *Feb 18 15:59:14.063: ISAKMP:(0):Checking ISAKMP transform 1 against priority 100 policy
    *Feb 18 15:59:14.063: ISAKMP:      encryption 3DES-CBC
    *Feb 18 15:59:14.063: ISAKMP:      hash MD5
    *Feb 18 15:59:14.063: ISAKMP:      default group 2
    *Feb 18 15:59:14.063: ISAKMP:      auth pre-share
    *Feb 18 15:59:14.063: ISAKMP:      life type in seconds
    *Feb 18 15:59:14.067: ISAKMP:      life duration (VPI) of  0x0 0x1 0x51 0x80
    *Feb 18 15:59:14.067: ISAKMP:(0):atts are acceptable. Next payload is 0
    *Feb 18 15:59:14.071: ISAKMP:(0): processing vendor id payload
    *Feb 18 15:59:14.071: ISAKMP:(0): vendor ID seems Unity/DPD but major 123 mismatch
    *Feb 18 15:59:14.071: ISAK
    R1#
    R1#MP:(0): vendor ID is NAT-T v2
    *Feb 18 15:59:14.071: ISAKMP:(0): processing vendor id payload
    *Feb 18 15:59:14.075: ISAKMP:(0): vendor ID seems Unity/DPD but major 194 mismatch
    *Feb 18 15:59:14.075: ISAKMP:(0):Input = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
    *Feb 18 15:59:14.075: ISAKMP:(0):Old State = IKE_I_MM2  New State = IKE_I_MM2
    *Feb 18 15:59:14.079: ISAKMP:(0): sending packet to 12.152.45.2 my_port 500 peer_port 500 (I) MM_SA_SETUP
    *Feb 18 15:59:14.079: ISAKMP:(0):Sending an IKE IPv4 Packet.
    *Feb 18 15:59:14.079: ISAKMP:(0):Input = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
    *Feb 18 15:59:14.079: ISAKMP:(0):Old State = IKE_I_MM2  New State = IKE_I_MM3
    R1#
    *Feb 18 15:59:23.291: ISAKMP:(0):purging node -49064826
    *Feb 18 15:59:23.291: ISAKMP:(0):purging node -330154301
    *Feb 18 15:59:24.079: ISAKMP:(0): retransmitting phase 1 MM_SA_SETUP...
    *Feb 18 15:59:24.079: ISAKMP (0:0): incrementing error counter on sa, attempt 1 of 5: retransmit phase 1
    *Feb 18 15:59:24.079: ISAKMP:(0): retransmitting phase 1 MM_SA_SETUP
    *Feb 18 15:59:24.083: ISAKMP:(0): sending packet to 12.152.45.2 my_port 500 peer_port 500 (I) MM_SA_SETUP
    *Feb 18 15:59:24.083: ISAKMP:(0):Sending an IKE IPv4 Packet.
    *Feb 18 15:59:24.111: ISAKMP (0:0): received packet from 12.152.45.2 dport 500 sport 500 Global (I) MM_SA_SETUP
    *Feb 18 15:59:24.111: ISAKMP:(0):Notify has no hash. Rejected.
    *Feb 18 15:59:24.111: ISAKMP (0:0): Unknown Input IKE_MESG_FROM_PEER, IKE_INFO_NOTIFY:  state = IKE_I_MM3
    *Feb 18 15:59:24.115: ISAKMP:(0):Input = IKE_MESG_FROM_PEER, IKE_INFO_NOTIFY
    *Feb 18 15:59:24.115: ISAKMP:(0):Old State = IKE_I_MM3  New State = IKE_I_MM3
    R1#ping ip 12.123.15.2 source loo0
    *Feb 18 15:59:24.115: %CRYPTO-6-IKMP_MODE_FAILURE: Processing of Informational mode failed with peer at 12.152.45.2
    R1#ping ip 12.123.15.2 source loo0
    Type escape sequence to abort.
    Sending 5, 100-byte ICMP Echos to 12.123.15.2, timeout is 2 seconds:
    Packet sent with a source address of 192.168.10.1
    *Feb 18 15:59:33.295: ISAKMP:(0):purging SA., sa=6568EB18, delme=6568EB18
    *Feb 18 15:59:33.967: ISAKMP: set new node 0 to QM_IDLE
    *Feb 18 15:59:33.971: ISAKMP:(0):SA is still budding. Attached new ipsec request to it. (local 10.123.5.2, remote 12.152.45.2)
    *Feb 18 15:59:33.971: ISAKMP: Error while processing SA request: Failed to initialize SA
    *Feb 18 15:59:33.975: ISAKMP: Error while processing KMI message 0, error 2..
    Success rate is 0 percent (0/5)
    R1#
    *Feb 18 16:00:18.975: ISAKMP: quick mode timer expired.
    *Feb 18 16:00:18.975: ISAKMP:(0):src 10.123.5.2 dst 12.152.45.2, SA is not authenticated
    *Feb 18 16:00:18.975: ISAKMP:(0):peer does not do paranoid keepalives.
    *Feb 18 16:00:18.979: ISAKMP:(0):deleting SA reason "QM_TIMER expired" state (I) MM_SA_SETUP (peer 12.152.45.2)
    *Feb 18 16:00:18.983: ISAKMP:(0):deleting SA reason "QM_TIMER expired" state (I) MM_SA_SETUP (peer 12.152.45.2)
    *Feb 18 16:00:18.983: ISAKMP: Unlocking peer struct 0x65C73CCC for isadb_mark_sa_deleted(), count 0
    *Feb 18 16:00:18.987: ISAKMP: Deleting peer node by peer_reap for 12.152.45.2: 65C73CCC
    R1#
    *Feb 18 16:00:18.987: ISAKMP:(0):deleting node 1582877960 error FALSE reason "IKE deleted"
    *Feb 18 16:00:18.987: ISAKMP:(0):deleting node 814986207 error FALSE reason "IKE deleted"
    *Feb 18 16:00:18.991: ISAKMP:(0):Input = IKE_MESG_INTERNAL, IKE_PHASE1_DEL
    *Feb 18 16:00:18.991: ISAKMP:(0):Old State = IKE_I_MM3  New State = IKE_DEST_SA
    R1#
    *Feb 18 16:01:08.987: ISAKMP:(0):purging node 1582877960
    *Feb 18 16:01:08.987: ISAKMP:(0):purging node 814986207
    R1#
    *Feb 18 16:01:18.991: ISAKMP:(0):purging SA., sa=6568F26C, delme=6568F26C

    Hi,
    when you applied the tunnel-group VPN, you should have seen a warning telling that tunnel-group can have name only if it's for remote-access VPN, or certificate authentication is used. so, L2L vpn with pre-shared keys can only have tunnel-groups named as the peer IP address.
    Mashal

  • My new messages still not coming into my mail inbox, my Mac OS X version 10.6.8

    Can you please give me the correct detail for Mail Preference/account information both incoming mail server & outgoing mail server.
    My new messages still not coming into my mail inbox yet, still not working since yesterday. My sent mails are ok working. What,s number for Port & click on 'use SSL'? 110?
    My safari is working Internet..  My ipad2 is still working to receive my new messages via my mail inbox. Something miss in my mail preference? How to fix it?
    Regards lisa

    Here's my reply to another discussion on the general procedures for setting up a Mail account.
    But without the specifications defined by your ISP no one can tell you any more specific details.  They should have a web page somewhere (or call them) that supplies all the relevant information:
    Incoming (pop) mail server
    mail login user name and password
    pop port
    ssl requirements
    authentication type (password?)
    Outgoing (smtp) mail server
    smtp port
    ssl requirements
    authentication type (password?)
    mail login user name and password

  • Why am I getting frequent spam emails via iPad that are not coming through my primary email account?  And how do I get them to stop?

    Why am I getting frequent spam emails via iPad that are not coming through my primary email account?  And how do I get them to stop? 

    Hi D.,
    Unfortunately phishing is far too common these days. The articles below will help you determine the authenticity of the emails that you received.
    Identifying fraudulent "phishing" email
    http://support.apple.com/kb/ht4933
    Identifying legitimate emails from the iTunes Store
    http://support.apple.com/kb/ht2075
    -Jason

  • Use smart card for 802.1x secured WiFi authentication

    Hi,
    is it possible to use a certificate stored on a USB Security Token for WiFi 802.1x authentication?
    I have setup a test environment with all required components (AD, Enterprise CA, NPS, WPA2-Enterprise capable WiFi Access Point, all required certificates, all Server 2012 R2 / Windows 8.1 Pro) and created a user certificate for WPA2-Enterprise secured
    WiFi access (802.1x). Everthing works fine as long as the user certificate is stored in the local certificate store of the user's client computer: The user can connect to the WiFi network and the NPS logs show that the user has been authenticated correctly
    and granted access.
    To test this scenario with a Smart Card (Safenet USB Token), I stored that same user certificate on the token (incl. private key). The Safenet software on the client computer automatically makes the certificate stored on the token available in the local
    certificate store as soon as the token has been plugged in (checked via MMC Certificates snap-in). But the certificate can't obviously be used for the desired WiFi authentication: If I try to connect the secured WiFi (the same as in scenario 1) the connection
    fails.
    As I'm using exactly the same certificate in both scenarios, I don't think there's anything wrong with the settings in the certificate, the NPS or any other infrastructure component. The reason for failure in scenario 2 must be lying somewhere in either
    the local client computer configuration or in the Safenet software on the client computer.
    I'm very familiar with all the PKI and authentication stuff, but I'm new to smart cards. Are there differences between different types of smart cards and for what purpose one can use them? (USB tokens, chip cards, virtual tokens, etc.?)
    Has anybody experience in creating a 802.1x secured WiFi access with smart card based user certificates who could advise?
    Thanks + Best Regards
    Matt

    Hi,
    I found some links form technet site which can be helpful in this case
    Network access authentication and certificates
    http://technet.microsoft.com/en-us/library/cc759575(v=ws.10).aspx
    Enable smart card or other certificate authentication
    http://technet.microsoft.com/en-us/library/cc737336(v=ws.10).aspx
    Quote:
    Client certificate requirements
    With EAP-TLS or PEAP-EAP-TLS, the server accepts the client authentication attempt when the certificate meets the following requirements:
    The client certificate is issued by an enterprise CA or mapped to a user or computer account in Active Directory.
    The user or computer certificate on the client chains to a trusted root CA, includes the Client Authentication purpose in EKU extensions (the object identifier for Client Authentication is 1.3.6.1.5.5.7.3.2), and fails neither the checks that are performed
    by CryptoAPI and specified in the remote access policy nor the Certificate object identifier checks that are specified in IAS remote access policy.
    The 802.1X client does not use registry-based certificates that are either smart card-logon or password-protected certificates.
    For user certificates, the Subject Alternative Name (SubjectAltName) extension in the certificate contains the user principal name (UPN).
    For computer certificates, the Subject Alternative Name (SubjectAltName) extension in the certificate must contain the client's fully qualified domain name (FQDN), which is also called the DNS name
    Yolanda Zhu
    TechNet Community Support

  • Trouble with Meeting Requests not coming through - GMail to Exchange

    I've just started trying to get a handle on all the thing my wife schedules for me around the kids. I've tried to get her to send me meeting requests so they go on my calendar but a lot of the time they're just not coming through. I get all of her emails and I get meeting requests all day long but there seems to be a problem getting the meeting requets from her.
    She has an iPhone 4S and I have an iPhone 5 both running IOS 6.
    She has gmail set up as Exchange in Mail on the iPhone.
    I have a true MS Exchange account set up on the iPhone
    She will create an event and add my work email as the invitee. It will show up on her phone but never come through sometimes.
    Sometimes I've noticed that on her phone my name has a question mark next to it in the invite.
    Any ideas? Any direction?
    Thanks
    Josh

    Any ideas on this? Still having the problem.
    Thanks
    Josh

  • I am very sure I have " find my iPod" on my iPod device but , it's not coming up when I try to look for it in the radar?! Unfortunately my iPod was stolen at school. Any help

    I am very sure I have " find my iPod" on my iPod device but , it's not coming up when I try to look for it in the radar?! Unfortunately my iPod was stolen at school. Any help

    lost/stolen                                     
    No app on the iPod is required.                           
    - If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected, on a computer browser go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up or conbtinue to show off-line.
    - You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
    iCloud: Erase your device
    iCloud: Use Lost Mode
    - If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
    - Change the passwords for all accounts used on the iPod and report to police
    - There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
    - Apple will do nothing without a court order                                               
    Reporting a lost or stolen Apple product                                              
    - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • OSX 10.9.1 macbook pro 13 retina - wifi does not reconnect automatically when waking up from sleep mode since I have a Bluetooth apple magicmouse

    Hello,
    My config is OSX 10.9.1 new macbook pro 13 retina (2014).
    The wifi does not reconnect automatically when waking up from sleep mode since I have a Bluetooth apple magicmouse.
    It was not the case before I bought the BT mouse.
    Is this problem between Wifi and bluetooth coming from the OS?
    Is there a fix already available or scheduled?
    Thanks

    Hello alexandrefromfrance
    Check the Symptom: The network connection drops unexpectedly section for steps on what to do when your MacBook Pro does not connect after waking from sleep. I have also quoted the section on troubleshooting the issue as well.
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    Symptom: After restarting or waking from sleep, my computer might not connect to the Internet
    After waking from sleep or starting up, your computer may not show that it is connected to a Wi-Fi network.
    After start or wake, your computer may indicate that it is connected to a network, but does not connect to the Internet.
    Solution
    Use these steps if your computer does not automatically connect to your desired Wi-Fi network.
    Check your TCP/IP settings in the Network pane of the System Preferences. Click the "Renew DHCP lease" button
    Choose System Preferences from the Apple menu.
    Choose Network from the View menu.
    Select Wi-Fi, then click the Advanced button in the lower-left hand corner of the screen.
    Click the TCP/IP tab from the top of the screen.
    Click the "Renew DHCP lease" button.
    Select the Wi-Fi tab and view your Preferred Networks list.
    Select each network and click the minus sign to remove those networks from your Preferred Networks list.
    Click OK and close the Network preferences.
    Remove your stored network passwords using the Keychain Access Utility.
    Open Keychain Access from /Applications/Utilities. Your window will look like this:
    Remove your AirPort network passwords from the login keychain: Select the "login" keychain from the Keychain sidebar. Click the "Kind" column to order the list of keychain items by their type. Remove all entries of the kind: "AirPort network password".
    Remove your AirPort network passwords from the System keychain: Select the "System" keychain from the Keychain sidebar. Click the "Kind" column to order the list of keychain items by their type. Remove all entries of the kind: "AirPort network password".

Note: The above steps will remove your Wi-Fi network passwords. If you do not know them, or if your network does not use passwords to restrict access, you should contact your network administrator.
    Restart your computer.
    Join your Wi-Fi network. You will need to enter your password for your network again if it requires one.
    Regards,
    -Norm G.

  • AIP SSM Command/control Interface is not coming up

    Hi to all,
    kindly be informed that , i have AIP SSM for ASA, i configured it and its workign fine.but its command control interface is not coming up at all, i connect my lap top direct to AIP management interface but its status is always is down.kindly look at this configuration and guide me how i can communicate with AIP using mangement inerface.
    My LapTop ip is 192.168.1.2/24
    AIP Configuration
    IPS1# sh ver
    Application Partition:
    Cisco Intrusion Prevention System, Version 6.2(1)E3
    Host:
    Realm Keys key1.0
    Signature Definition:
    Signature Update S365.0 2008-10-31
    Virus Update V1.4 2007-03-02
    OS Version: 2.4.30-IDS-smp-bigphys
    Platform: ASA-SSM-20
    Serial Number: JAF1319AJRG
    No license present
    Sensor up-time is 13 days.
    Using 1019777024 out of 2093604864 bytes of available memory (48% usage)
    application-data is using 47.1M out of 166.8M bytes of available disk space (30% usage)
    boot is using 39.7M out of 68.6M bytes of available disk space (61% usage)
    MainApp E-2008_OCT_16_16_24 (Release) 2008-10-16T16:40:57-0500 Running
    AnalysisEngine E-2008_OCT_16_16_24 (Release) 2008-10-16T16:40:57-0500 Running
    CLI E-2008_OCT_16_16_24 (Release) 2008-10-16T16:40:57-0500
    Upgrade History:
    IPS-K9-6.2-1-E3 16:24:00 UTC Thu Oct 16 2008
    Recovery Partition Version 1.1 - 6.2(1)E3
    Host Certificate Valid from: 12-Jul-2009 to 13-Jul-2011
    IPS1#sh conf
    ! Current configuration last modified Sun Jul 12 23:56:08 2009
    ! Version 6.2(1)
    ! Host:
    ! Realm Keys key1.0
    ! Signature Definition:
    ! Signature Update S365.0 2008-10-31
    ! Virus Update V1.4 2007-03-02
    service interface
    exit
    service authentication
    exit
    service event-action-rules rules0
    exit
    service host
    network-settings
    host-ip 192.168.1.3/24,192.168.1.1
    host-name Cinet-IPS1
    telnet-option enabled
    access-list 0.0.0.0/0
    exit
    time-zone-settings
    offset 0
    standard-time-zone-name UTC
    exit
    exit
    service logger
    exit
    service network-access
    exit
    service notification
    exit
    service signature-definition sig0
    exit
    service ssh-known-hosts
    exit
    service trusted-certificates
    exit
    service web-server
    exit
    service anomaly-detection ad0
    exit
    service external-product-interface
    exit
    service health-monitor
    exit
    service analysis-engine
    virtual-sensor vs0
    physical-interface GigabitEthernet0/1
    exit
    exit

    If the interface won't link Up, then it is likely a cabling problem.
    Even with a bad configuration on the AIP you should at least get link UP if your cabling is correct, so I don't think configuration is your problem here.
    If I remember right the command and control interface of the SSM is a 10/100 TX interface. When connecting from a laptop directly to the command and control interface it would require a cross over cable rather than the normal straight through cable.
    If you don't have a cross over cable, then try connecting the SSM to a switch and see if the SSM will link UP. The switch is designed to internally do the cross over.

  • Ios6 update prevents wifi authentication EULA

    I used to be able to connect to a public wifi at Long Island College Hospital in Brooklyn, New York by clicking "Agree" on its End User License Agreement. Ever since updating to ios6 on my iphone 4S the authentication screen does not progress after clicking "Agree", preventing me from getting free wifi. If i click "Disagree" the webpage goes blank. Other iPhone users with ios5 are able to connect fine, as are android phones. Interestingly, I have no such problems with authentication/EULA pages at Starbucks or McDonalds and my wifi router at home still works fine, granting my iPhone access to the Internet.
    I tried messing with various combinations under settings/wifi, resetting my iPhone network settings, clearing Safari cache settings, etc..  Nothing allowed me to successfully click "Agree" on that specific free wifi authentication screen, while the previous iOS users continue to be able to connect fine. Just stuck at that screen thanks to the iOS 6.

    I used to be able to connect to a public wifi at Long Island College Hospital in Brooklyn, New York by clicking "Agree" on its End User License Agreement. Ever since updating to ios6 on my iphone 4S the authentication screen does not progress after clicking "Agree", preventing me from getting free wifi. If i click "Disagree" the webpage goes blank. Other iPhone users with ios5 are able to connect fine, as are android phones. Interestingly, I have no such problems with authentication/EULA pages at Starbucks or McDonalds and my wifi router at home still works fine, granting my iPhone access to the Internet.
    I tried messing with various combinations under settings/wifi, resetting my iPhone network settings, clearing Safari cache settings, etc..  Nothing allowed me to successfully click "Agree" on that specific free wifi authentication screen, while the previous iOS users continue to be able to connect fine. Just stuck at that screen thanks to the iOS 6.

  • I have installed my brother computer and is in my printers and devices but is not coming up as a printer option in adobe pdf Help I was able to print PDFS before installing adobe now I cant

    I have installed my brother computer and is in my printers and devices but is not coming up as a printer option in adobe pdf Help I was able to print PDFS before installing adobe now I cant

    Be sure Safari does not have the Block Pop-Up Windows preference set.
    Where I work now there are several unencrypted VLANs that require authentication, and Safari promptly pops up a window for me to register every time.

  • Mavericks static ip doesn't on wifi does not work

    MBA 2011
    MAC OS 10.9.4
    Wifi does not work with a static IP address.
    My wifi access point does not have DHCP enabled, and there is no DHCP server on my network. The internet connection is NOT coming my wifi router.
    Every machine on the network has a static ip address and manually configured DNS and GATEWAY to my correct gateway IP. This currently is working on this machine (windows 7), my ipad 2, my xperia phone, my windows xp box, my vista box, and even a virtual pc running windows server which is on my mac.
    But the mac won't connect to the internet, or ping anything including the gateway ip address or any other machine on the ip address.
    how can i get this mac to have a static ip address without having dhcp

    Going to System Preferences -> Network, and selecting Wi-Fi in the left pane.... Questions:
    . does the Status in the right pane show connected?
    . if so, does the Network Name: reflect the name of the network you assume it should be connected to?
    . if so, clicking on the Advanced... button and choosing the TCP/IP tab:
        . is the Configure IPv4 pulldown set to Manuallyh?
        . if so, have you entered in a valid router value (to mirror what you have set on the other working devices), and an IP address which you know is not already in use on the network?
        . if so, when you Ok out of this sheet panel, if you run /Applications/Utilities/Terminal and in that window type "ifconfig" can you find a configured network device with the address information you've entered (likely either en0 or en1)?
    If all as anticipated by here:
    . what message do you see in the terminal window when you do a ping to the access point's address?
    . are you super-sure that address isn't already in use on the network (e.g on a device already on the network successfully and with your MBA's wifi turned off, try pinging the thought-to-be-free address to see if something answers back).

  • (Request for reporting available) is not coming in Cube

    Hi All,
    I have Cube & DSO.
    I  added fields in DSO & Cube.
    Cube1 has Aggregrates built on it.i added 5 infoobjects on it, Now when i load data from DSO to Cube(Request for reporting available) is not coming up. i cant do reporting on it. can anyone help.
    thanks in advance,
    Kiran.

    Hi ....
    Have you done the Roll up ?
    Since aggregates are there on that cube....until and unless you do the roll up that request will not be available for Reporting...
    Regards,
    Debjani....

Maybe you are looking for