WiFi auto login problem

I have a iphone 3g s with ios 4.1. My institution has a wifi connection in which after connecting to the wifi network we have to login through a web page. The institution has two login pages, one for desktops and the other for mobiles. The problem is that the mobile page is not properly coded so even after entering username and password and clicking, it would come back to the same page and thus no logon. Earlier I had a nokia n95 phone in which after connecting to the wifi network, whenever the mobile site used to open, I would edit the link and open the desktop version. Now in iphone whenever I connect to the network, the mobile version always opens up with no address bar and thus I can't login.
Can anybody help me as to how I can edit and open the desktop version.

Don't close the auto login page - edit the URL for the login page provided for the Desktop version.
If this is not successful, the brainiacs at your institution in charge of this need to update the login page that is provided for mobile devices so this isn't a problem - especially with the number of mobile devices that are available now which will continue to increase. This was a problem with your Nokia and now with your iPhone, so whoever is in charge of this at your institution should eliminate the mobile version of the login page and just provide the Desktop version since they don't know what they are doing with the mobile version.

Similar Messages

Auto login problem

On startup with auto login enabled my user account seems to be somewhat crippled i.e ClearDock not enabled, Xsounds not enabled, no automatic access to my wireless router. If I log out and then log back in everything is fine or if I turn auto login off in Accounts everything is OK. This problem just started recently. Hope someone can help with this one.
Quad G5 PowerMac Mac OS X (10.4.8)

Resetting Password
1. Shut down comp & wait a few minutes.
2. Turn on & at the same time hold down the “command” & “R” keys.
3. Next screen….. In the menu bar click on Utilities (NOT OS X UTILITIES)
4. In the drop down menu, click on Terminal.
5. In the terminal pop up small window: Type exactly—> resetpassword Hit return key.
6. Reset password window will pop up. Follow the onscreen instructions to reset password. Make sure you select the admin account to reset the password.
7. You can ignore the “keychain” pop up windows, which is what I did. Does not affect anything.
You can do the keychain stuff at your leisure.
8. Quit out of everything & restart your computer.
9. Enter your new reset password.
Once you are back on the desktop, you can go into System Preferences>Users & Groups and keep auto login.
Also, check out the following User Tip: Reset the user password in OS X Lion, Mountain Lion, Mavericks and Yosemite

Auto login problem in Discoverer -- Urgent Help

Hi All,
I'm trying to call discoverer 4i plus from viewer.
I did auto login for discoverer 4i plus for 9i AS(2.1).It worked
fine. I did the same for 9i AS(2.2).Basically i tried to get
login inforamtion from cookies in webdisc.js file .The edited
webdisc.js like this
var user = getCookie ("Username");
If i remove this line my discoverer 4i plus works fine without
having any problem.if add the above code then i get the
following error
"Unable to connect to the Oracle Discoverer Application server.
Failed to connect to session XXXOracleDiscovererSession4 using
OSAgent."
Any help please..
Thanks in advance,
Sapna

Hi Jerome ,
Thanks for the reply.
I installed 9iAS(2.2) on NT. clint is on WIN2000.
Are u using cookies?
In my viewer, i've provided a link to plus. When an user hit
this link it should take the userid from viewer and auto logins
to plus. In viewer, i'm putting the userid and password in a
cookie and reads the information from cookie in webdisc.js(This
is disco plus script file for auto login)
I did the whole process in 9iAS(2.1) it works fine. Only this
version(2.2) i'm getting the error
"Unable to connect to the Oracle Discoverer Application server.
Failed to connect to session XXXOracleDiscovererSession4 using
OSAgent."
I'm interested to know how u did auto login on NT using <PARAM>
tag.
Best Regards,
Sapna

WiFi password login problems with IOS4 update

Ah, so I downloaded the new ios a few days ago, and my home wifi had been
working just fine, up until tonight, where I was asked for my password
for the WiFi network.
I put in the password through the Wifi menu in setting, and nothing happens.
There is no confirmation as to whether I was correct or incorrect, or if I had connected at all.
Instead, it sent me back to the screen and refreshed the list of available
networks, and shortly, asked me for my password again.
So then, I try it in Safari, and upon the input of my password, it tells me I'm incorrect ?
I'm 100% sure it's correct after re-confirming it with my internet provider,
and I've re-entered it at least three dozen times.
Anyone have any solutions, or maybe even having the same problem ?
Thanks !

I want to piggyback on the query you have made as I found the answers useful. I have a situation similar, though I am presently not locked out or having any troubles. I have a password which is BLANK. When I bought the MacBook Pro, the sales rep (this was at an Apple reseller location not an Apple Store) advised me to set it up with a blank password and I could change it later.
So, for now, whenever I want to make any system change, install software etc, I simply hit the return key when asked for the password, as mine is BLANK.
I want to know what are the steps to take to set up a password now. I am assuming that I go to the System Preferences, System, Users and Groups, and for administrator, click change password. Up to this step, very easy. It is what happens next that concerns me.
I have no users set up on the machine. I am the exclusive user.
When I am asked to enter my password, do I enter a "return" command or do I "tab" past the block for the password?

Auto login problem with Mozilla FF 3 since I installed windows 7.

'''this just started after win 7 install. I hit remember me and it still makes me log in it saves the passwords but I still have to enter them

Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!

After I Upgrade the OS Wifi auto find problem

I have New Z10 Blackberry the Wifi was working fine after I upgrade the OS to 10.2.0.424 software release the wifi is not detecting any network please help

Well you can go back to your previous OS if you like. Because I don't know why your having WIFI issues and it just came out yesterday the OS so not a lot of people reported back bout WIFI issues.
Want to contract me? You can follow me on Twitter @RobGambino
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Mac Os X Lion - Wifi Auto-Join/Dropout Solution

Just a FYI for others who may encounter this problem after upgrading to Lion.
Found a good solution from -
http://www.ilounge.com/index.php/backstage/comments/os-x-lion-serious-wi-fi-disc onnect-problems-for-macs-and-solutions/
# Comment number 4 (of that page)
Using his recommendation I found simply removing 'Wifi' (by clicking the '-') in Network Preferences clicking 'Apply' and then adding it again via '+'. Resolved the wifi auto-join problem (on start-up and wake) and dropout issue for me.
Using a Macbook Pro 13" - 2011 model (upgrade - not clean install of Lion).
Cheers,
Chris

Thanks for posting chris, I'm giving it a try.
My install was a upgrade not a new install.
am currently on 10.7.1
27" imac 3.2GHz Core i3

Problems joining Wi-Fi networks that require viewing a redirect page in iOS 8.1.1? Check your "Auto-Login" setting.

Are you having problems joining previously used Wi-Fi networks that require you to view a login or redirect page (say to accept Terms of Use) first? The problem could be your Auto-Login Wi-Fi network setting.
I found numerous cases where I could not access in-store Wi-Fi networks (Nordstrom was one), hotel networks or in fact networks where you had to first view a Terms and Conditions page or where you had to login via a web form.
These were all networks I had used before.
This appears to be due to the "Auto-Login" setting assuming that once you (re)join a previously known network you can just go ahead and use it without further action. When the iOS device receives an error trying to use the network, it silently drops the Wi-Fi association.
If this is happening to you, follow these steps:
1) Go to Settings -> Wi-Fi
2) Select the network you want to join
3) When a check-mark appears next to the SSID, press the "i" button on the right hand side
4) Set Auto-Join however you want, but shut off the Auto-Login switch
5) Now attempt to use the network and you should be presented with the usual redirect page with terms you must accept or where you must login to use the Wi-Fi network in question
This cleared up the issue for me everywhere I had previously been having issues.

Just let me get one thing straight...you don't change don't do this for the PC you have your router plugged in to?
"For Vista:
1. Open Control Panel, Network and Internet, Network and Sharing Center, Manage Network Connections
2. If Wireless, Right click on your Wireless Network Connection, otherwise, Right click on Local Area Connection and click Properties
3. Highlight Internet Protocol Version 4(TCP/IPv4)
4. Click Properties
5. Tick Use the Following IP Address and enter the IP you want to use for that PC. I would start at 192.168.0.100(D-Link) and work your way up on each additional device. The second device would be 192.168.0.101, the 3rd, 192.168.0.102 and so on. Like I said, different brands of routers use different IP's, so it could be 192.168.1.100 and so on, so you will need to know the IP address of your router first.
6. Subnet Mask is 255.255.255.0 on all pc's and devices
7. Default Gateway is 192.168.0.1(D-Link) or whatever your router's IP is on all pc's and devices
8. Tick Use the Following DNS Server Address and enter 192.168.0.1(D-Link) or whatever your router's IP is and click OK.
9. You will need to do this on all Vista Pc's"

Safari Auto-login/ Auto-fill problem

Hi!
I recently updated my safari after which I have been unable to auto login to my yahoo,gmail etc accounts. I have checked my safari preferences and all 3 auto-fill webform tabs are clicked. Also, when I go into yahoo, it does not prompt me to ask if i want to save my password. For my other accounts e.g gmail, they prompt me and my password + user-ids are still saved, just that i have to press the sign in button.
Also, it stays signed it as long as i am on safari. However, if I were to quit safari and use safari again, it goes back to square one and no longer keeps me signed it.
What can I do to enable safari to auto-login for all my accounts?
Thanks!

I have asked a similar question several times before, and I have the answers varied from the typical I do not have that problem to its a security feature incorporated in Safari.
I tend to think it is a new feature added ito safari n the last several months (via an update).
The bottom line is I am NO longer able to stay logged into various websites if I quit safari, even though the websites have the feature available that should allow a user to stay logged in for 2 weeks.
The only way I can now stay logged in for an extended period of time is to NEVER quit Safari.
That is not an option for me.
rjj

Auto login wifi guest network

hi all,
we running an iPad pilot within our company and I'd like to use the internal wifi guest network. the guest network is using a loghin page with userid and password and a little checkbox to accept the terms.
when i connect with the ipad (and iphone as well) and fill in the required fields it nicely connects. but after sleep or a reboot it keeps coming with the login page and needs the uid/pw/checkbox. I can make the ipad remember the uid/pw and it fills them in the login page but it keeps wanting the checkbox.
there should be some automatic protocol to auto login so I connect to the company wifi just like it is at home (i know, wpa2 at home is completely different, but for the end user is isn't
is there an option somewhere in Iphone config util? Can I pre-deploy guestnetworks with ipcu?
anyone?
cheers,
emiel

This is not an iPad / iPhone issue. This is an issue with the way the network is configured in regards to authentication.
Just a guess, but I'm betting you don't have the cooperation of the IT department in this venture, do you? If you have a separate, secure internal network, You may be able to convince them to allow the iPads access to that network instead. The fact that you're trying to use the guest network tells me that IT either doesn't know about this or has prohibited their use on the company network.
That, or the company contracted out the configuration of the network and no-one knows how to get around it.
This wouldn't by chance be a hotel, would it?

Auto login and password problems with Safari after OS 7.0.4 update?

Hi all,
I updated my IPad 4 to OS 7.0.4 , now Safari won't auto login to my favorite forums and won't remember my user names or pass words. I checked in Safari settings and Names/passwords and auto fill are on. Have restarted a number of times but no change. Any fixes?
Thanks.

Make sure Private Browsing is off.
Tap "Private" on Safari Screen to disable Private Browsing. When top of screen is white, Private Browsing is off.
http://i1224.photobucket.com/albums/ee374/Diavonex/547958b4a8c01ac084dd6649e8386 a0f_zps12fa0cca.jpg

Auto-login issues since Restoring to new iPod Touch

I recently purchased the new iPod Touch 32GB and restored all of my settings from my previous iPod onto this one. My previous Touch was also on 3.0.
Since the upgrade I have had constant issues with the auto-login web feature at my local Starbucks. It sits on the "Connecting" screen and then eventually fails. Then I have to choose to connect to the network (because it automatically disconnects wifi when the login fails). Then when I connect a second time it brings me directly to the login screen where I can enter my account info and choose to save it to auto-login in the future. The problem is that it never seems to work the next day when I try to connect again.
My previous iPod Touch never had issues with the auto-login feature. And let me tell you that it is frustrating that there is no cancel from the dimmed "connecting" screen. I have to wait 4-5 minutes for it to realize it's not working.
I have already tried:
-Clearing Cache
-Clearing Cookies
-Clearing Autofill Names and Passwords
Any help would be awesome!
JT

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Auto login in AUR with Firefox.

Is there a way to auto login into AUR with Firefox. Now when I get there, the username and password is filled in. But I would like to be logged in. I think Opera does it.
Possible?

It should work, I've updated my FF last week and had no problem so far. Actually I'm using FireFox 2.0.0.8 to post this message. I have noscript extension as well.
All you need to do is enable cookies for forms.oracle.com/ and set it as whitelisted if you have any security extensions.
Tony

Help required on configuring Auto Login...!

Hi All,
I'm using SUn ONE Webserver Service Pack 9. And once after starting my Web Server instance and when ever I invoke my application url (http://localhost:8080/) It automatically takes me inside the application. I need to remove this auto login configuration. Because whenever I use Logout and login using some other user_id. It still logs in as the same Auto login user name.
Kindly help me.
Thanks in advance.
SAM

Hi,
I resolved the problem. It was too some more properties files which needs to be added to the app.
Cheers
SS

Auto Login Setting Not Being Saved

I'm trying to enable auto login. When I go to sys prefs and set auto login to the userid I want and exit sys prefs then go back to sys prefs it is reset to the original user. Any ideas what is wrong?

Try to move this file on th desktop and restart :
youraccount/Library/Preferences/ByHost/com.apple.systempreferences.xxx.plist
HD/Library/Preferences/com.apple.loginwindow.plist
If doesn't fix the problem , put them in their original place.

WiFi auto login problem

Similar Messages

Maybe you are looking for