Wifi big problem
in our office we have 2 x 16GB 3G IPHONES. one was bought 6 weeks ago, the other 2 weeks ago.
both are updated to latest 2.0.2 update.
in our office we have wireless, one has perfect signal and is connected and the other which is no more than 1foot away, cannot even locate the wifi connection.
we have tried resetting network connections, restoring phone.
if we take the non connecting phone nearer the wifi router it will find it, we then enter password it will then say unable to connect, yet the password works perfectly on other phone. we have tried different settings etc.
at home, the non connecting phone says it connects to wifi, yet when it comes to browsing, it won't.
it worked fine up until update, now i have problems. public hotspots are also an issue.
any ideas anyone ?
hi pouagia
well here is the weird thing. we have a belkin in our office, when i got my replacement i tried to use it and hey presto it worked.
today all 3 iphones will connect to the belkin, but if we open a safari or other app, the wifi won't work.
yet my macbook pro can find the belkin and connect to a safari page !!
so therefore it must be a setting on the iphone for that particular wifi connection, i tried renewing the lease and also changing to from off - auto on the proxy.
i am wondering if this is part of the problem i had before ?
Similar Messages
-
. Can pictures get on your icloud other ways? Can something be put on there by someone other than yourself, liked public wifi or hacked? Got a big problem with some **** on an iPod and I am to knowledgeble about the ipod...thanks
You're not confusing this with a shared Photo Stream...?
Because the short answer is no, photos don't appear unless they were put there by someone with your Apple ID credentials. To rule out that possibility, change your Apple ID password by carefully following all these instructions:
iCloud: Change your iCloud account password
If you decide to change your password, and you also want to change your Apple ID, I recommend you do not concurrently change your Apple ID until sufficient time has passed and you are confident the password change has been effected on all your iOS devices. 24 hours ought to be more than enough.
It is not necessary to change your Apple ID unless it is an email address you no longer wish to use. -
Hi everybody, I am in Turkey on a long assignment, I need help solving a big problem on my macbook pro os 10.9.3. The other week my wife visited some website and now we have a redirect virus of some sort, and every other time when we click on a link or anywhere on the page we are redirected to this casino web site, https://casino.7bets10.com/tr/?from=hy9yKXD43jSC-8Oxbw4femNd7ZgqdRLk-dHJpeG9uaXR l. Its the same whether on Chrome or Safari. Does anyone have a solution, thank you!
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
Copy a line of text in this window to the Clipboard.
Paste into the window of another application.
Wait for the test to run. It usually takes a few minutes.
Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' \*AutoCad \*dropbox \*GoogleDr\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Hello community I have a big problem with my iphone 4s as precent problem with wifi and ios7. my phone was a champ when actualize this, eh degrade searched everything but I can not because I get the error 3194. I want a solution please
This support document http://support.apple.com/kb/ts4451 relates to the 3194 error. Generally this error has to do with trying to install an iOS that is not the most current. Maybe you tried to jailbreak the phone, or downgrade iOS? Any of this apply to you?
-
BIG PROBLEM with Lenovo A320 wifi - extremly slow
Hello Lenovo community,
I have a big problem with my lenovo A320 all in one.
The wifi connection is extremly slow. I have 3 differen devices at the same place one macbook, one phone and my lenovo a 320 connectet to the same wifi. The macbook and phone get about 50mpbs but my lenovo gets only about 0.3 to 2 mbps. I have tested it wit different networks and differnet routers but is always very very slow.
When connected via LAN works fast and well but via wifi its useless.
I have the intel core I3 and Broadcom 802.11n with the newest drviers.
I have tried everything possible but nowthing helped.
Can you please help me with any solution ?
Thank you in forwardThats great news for you.. it probally is a defect on my phone, I purchased it new from apple and tommorrow its going in for service..
I have seen others with similar issues, must be a bacth, I even heard that there are 2 wifi antenas that were used on them, one of them gives problems the other not...
Just a shame, its a great phone
thanks for all the feedback -
One Apple ID two phones big problem.
Hi guys,
Before 6 months I bought new Iphone 4s,but it was used one day from person who sell it to me, so it already has Apple id.
I deleted user and created my user which was synced with iCloud and worked without any problem.
Before 10 I bought Iphone 5, also created my Apple ID on it and sync with my PC/ iCloud.
Yesterday I want to sell my first Iphone 4 and I did reset ( Erase all content and setting), but it did not want to wake up, so i started it with DFU mode using I tunes, and I did restore and update.
Now I am facing to bit problem, on the begging steps it says something like "this apple id cannot be used to unlock this iphone".
If I go to iCloud I can see only one device and currently its new iPhone 5, but both devices called with same name, so I am not sure is this problem.
So I have two doubts:
- I am not sure does SIM card can make this problem(on initiation phase you have to put sim in Iphone), because main is much smaller now so I using my wife SIM to finis registration Iphone 4 (iPhone 5 using smaller than iPhone4)?
- another thing It says you have to "use original apple id..", like I sad on the beginning when i bought Iphone4 it already has apple id on it, which I was deleted and configure main (afterwards this device was visible on my iCloud). So do I need to put first creaded apple id, does iPhone remembering first created or last used. If yes I have big problem because I dont have contact of user who sell it to me.
I want to add one thing, Iphone is not stolen I have warranty documentations and all profs that is not stolen.
PLEASE HELP, in my country we have awful support !Just left the Apple store with an official answer. You can have two phones one Apple ID, turn off auto updates so you don't automatically get apps on both phones. Then you need two different iCloud accounts.
-
Is this a big problem or one that will go away? Small lines on screen
I have a row about 2 or so pixils big, halfway across my screen. You can barely notice them on the background, and I dont notice them when I move my safari window over it. But I have changed my desktop background to different things, solid colors, photos, random photos apple had in there, and the lines were still there.
It is about 4 rows, very thin, different lengths, right side, just below the center of the right side of the screen.
Is it the beginning of a big problem? I was thinking of calling up applecare then going to an apple store to have the screen replaced.Thanks. I will back up my data this wednesday, install snow leopard on friday (i doubt it would do any fixing... want to see it though, cant wait to install it :P). Then on the 8th I will schedule an appointment and go to the apple store. That way I can make 1 trip. I plan on getting my ipod touch replaced, the battery for some reason doesnt hold a charge too well, last night on wifi the youtube app drained 25% in 20 minutes.
-
WiFi connection problems (different than others)
Hello!
I got an iPod touch 32GB 4 days ago and I have really big problems with WiFi. I cannot connect to any wifi i've tried. Even setting my own wifi unprotected and unfiltered, it still doesn't work. I've also tried at wifi connection at work. Yesterday a mate who has an iPod touch 8Gb and me tried to connect to our wifi at work, and he COULD connect to, but not me!!. Having one each iPod near to other, doing exactly the same steps. No way.
These are the symptoms: I enter the password and it's accepted (if I enter wrong password, or filtered by MAC, I get a response telling that it's not possible to connect; but if I put the right password, it 'connects', tried WEP 40bits using Key1 and WPA PSK). The blue tick appears near to SSID, but there's no blue icon on the upper left of screen (near to 'iPod'). If I enter on configuration of the 'connected' network, I see that I have selected DCHP, but got no IP, no netmask, no router, no anything. So, if I try to set an Static IP, when I exit Settings pannel and enter again, the blue tick is still there, but the settings is set to DHCP again!!.If I sleep/wake iPod, then it appears disconnected.
I'm really getting crazy!. The most incredible thing is that with an iPod 8GB it works and mine's which is an 32GB model and started to sell later, doesn't not work!.
At home I have a Linksys WRT54GL using firmware OpenWRT 0.9. And at work it's one from Telefonica.
Is maybe some kind of known bug that will be fixed on next update? (I really really beg for...). I read somewhere something about a wifi bug in 32GB edition of iPod Touch.... is that true?
Is there something I could try? Any ideas?
Message was edited by: FarlopHi Jason!
I tried the 'Forget this network' several times, but it has no effect. The iPods doesn't get any IP from the router. I can't set an Static configuration anyway, it simply doesn't work. The Static configuration is erased when I leave Settings panel.
In the router's log is not registered any DCHP query at all. I use MAC filtering, but I tried disabling it, no way. If I remove the iPod's MAC, I get an error while trying to connect. When I add the MAC to the list again, it 'connects' the same way I explained before. The same happens with security, bad password: error, good password: 'connects' but no IP no WiFi icon in iPod screen at top, just the blue tick near to the network name...
At home I have two laptop, one PDA and some other wireless gadgets (from friends, etc) that I configured myself in the router and never had a single problem. But with the iPod I couldn't do anything :'(
Thanks for the idea, anyway
Farlop -
hello all .. i have a big problem in my ipad version 5.1.1 that is when i connect the ipad with my computer the i tunes give me this message ( itunes couldnt connect to this ipad .an unknown error occurred (0xE8000012).) how i can solve this problem please
and this is an pic for the problemThere is some troubleshooting for 0xE8 error codes on this page : http://support.apple.com/kb/TS3221 - you could see if anything on that page fixes it
-
I need help with an email WiFi sending problem on my iPad 2
I’m having an email WiFi sending problem on my iPad 2 Model: MC774C/A; IOS VERSION: 6.1.3 (10B329).
While I use 4 email accounts on the iPad -- Hotmail, Gmail, iCloud and ns.sympatico.ca ( a division of BellAliant) – the sending difficulty only relates to the ns.sympatico.ca. The settings for this account are: pop.bellaliant.net and smtp.bellaliant.net
I first noticed the problem about 3 weeks ago while travelling across the country (Canada). (I do recall about that time there was an update of my IOS and I also for my wife purchased from the Bell store an iPhone which shares my Apple account.) Prior to that everything worked well for a couple of years.
I noticed earlier this month that the iPad received mail fine but would not send at night using the motels’ WiFi. During the day, using my 3G account, all worked fine. I phoned Bell but was told that my experience was normal so I thought no more about it until I returned home and found the same problem at the house. I called Bell again and worked for 2 hours with 3 Bell technicians who succeeded in getting the iPad to neither send nor receive and gave up advising me to take the iPad into a Bell store to have it looked at. I did that and the young technician got the iPad sending and receiving by changing the smtp.bellaliant.net to mail.1xbell.ca
However, when I returned home again, I realized that it was working on my 3G and still doesn’t send on my WiFi
I’m looking for any suggestions that might solve this annoying problem?iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
Cheers, Tom -
Hi
I've a big problem with adobe acrobat reader XI pro and I hope you can help me.
The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reader (adobe pdf reader, internet browsers, ...etc.).
This problem started to happen since yesterday when I installed adobe acrobat reader XI pro to try it before I buy it, and before that when I was using the free adobe pdf reader I was totally able to copy any text from any pdf and past it anywhere with nothing wrong.
What can I do?
thank you a lot.There is no product called Adobe Acrobat Reader Pro. There is
- Adobe Acrobat Pro ($$)
- Adobe Reader (free)
Which do you have? And are you a programmer? -
I am having a big problem. I am not getting notifications from snapchat and only snapchat. I've made sure every notification setting was on and it just won't work. I have also restored my phone and deleted the app and re-downloaded it multiple times. It just wont give me my notifications. Help please.
Go to Settings > Privacy > Location Services.
Turn off SnapChat.
Go to Settings > Notification Center
Turn off SnapChat.
Restart the device.
Go to Settings > Privacy > Location Services.
Turn on SnapChat.
Go to Settings > Notification Center
Turn on SnapChat.
Test the issue. -
How to load an image without a gui? big problems...
Hey guys, I usually try my best to not ask for help and figure stuff out myself. But this last week i've been having big problems with this work project.
My goal is to load images from disk, and append them to each other to create one big image.
The images are 0-9.jpg each file containing a number in it. then i create one big file with 4 numbers in it. called final.jpg.
so far i can do all this, but whenever the program is finished, the application just keeps running. the program has literally gone through all the steps... i have a system.out.println printed on the last line after the main, after the class instantiation... and still it stays running.
how do you guys load images without a gui? This program will probably be running under unix, so i can't create a (for component example)
Panel() and media track the file load... so i'm pretty much stumped
any help you guys can provide would be really incredibly helpfull at this point. I have searched these threads for a few hours without luck. I found only 1 real post related to my problem, but eventually they said use MediaTracker = new Mediatracker( new Panel() ); which i can't use. :(
Thanks a lot guys.
:Dyeah tried doing that, didn't work either.
UPDATE
I FINALLY found a way...
and here it is for others to find!
public BufferedImage getImage(String filename) throws Exception {
FileInputStream input = new FileInputStream( filename );
JPEGImageDecoder decoder = JPEGCodec.createJPEGDecoder( input );
BufferedImage image = decoder.decodeAsBufferedImage();
return image;
it returns an image buffer, but it's better than nothing! :)
atleast this functions under unix. -
Hi There
Am having a big problem updating my iphone 4 Apps, due to a problem with my password for my apple id. But it seems that i have two different ids, one for the updates and another for the downloads. I am not able to retrieve my Id password for updating my Apps. Can you help me ps?
Thank youWhat program did you use to fix the internal hard drive? What repairs did it report making? More crucially, if repairs were reported, did you re-run the utility until it reported no problems found? It's possible for one set of problems with a drive to mask others.
If you have about 5GB or so free space on the internal hard drive, you can use your OS X Install disc to perform an Archive and Install to recover from the failed Software Update. When the computer restarts, download and run the OS X Update Combo 10.4.11 (Universal). When the Mac restarts after that, run Software Update. During all this, make sure nothing interrupts or shuts down the Mac! Note that the first start after each of these updates will take significantly longer than subsequent starts, so be very patient.
How did you back up your internal drive to the external one? Did you just drag things over in the Finder, or did you use a utility such as SuperDuper! or CarbonCopyCloner? Does the external HD show up as a bootable volume in System Preferences > Startup Disk, or using Startup Manager? -
Having big problems with my new Mac Pro, when I launch Photoshop CC, I get an error message, can carry on but after a few tasks it starts going gar... menus go blank, when you try to save it shows a blank box.... can anybody help?
when I launch Photoshop CC, I get an error message
and what exactly is the text of that error message?
Maybe you are looking for
-
There was an error in the App Store. Please try again later. (13)
Hey guys, about a month i cant download / update apps from mac apple store. i tried to search sulotion in this forum and other forums, and still show me the error massage. maybe you have official fix for this problem? thanks, Gil
-
I Have problems with texting and using the keyboard since going on the new update is07 it's like a delayed reaction when I'm typing
-
Email attachments keep trying to open with other program's like Dropbox or iCloud
Hi guys Since downloading Dropbox and other program's like cloudon When someone sends me a word/excel doc via email attachment it try's to open with it. I want it to open how it used to but cant find a setting can anyone help please? Thanks
-
Hi Guys, I am wondering if you could help me. I am quite new with SRM. In SRM 5, from the Option "verify status" is there any way a user who is taking part of the approval workflow (and he is not either the recipient or the purchaser) of a SC, can he
-
After using Energie On The Go BB will not charge from wall
My BB was out of power and I bought an Energizer Energie on the go to charge my BB and it worked fine. But since then the BB will not charge from the wall. I bought a new batery and same story. the plug con comes on when first plugged to the wall cha