WiFi bug with phone app.

I searched the board, didn't see anything about this. I've verified that this happens on 2 different Pre's, and also numerous times on both.
If I am on call and connected via WiFi to my router, then a 2nd call beeps in, when I disconnect from all calls, the phone will not hang up. Ever. You can wait hours. You'll still be able to hear your voice echo in the phone as if you're connected to a dead line. The only solution for this bug I've found is to restart the phone, and then it lags on shutting down, and eventually you hear the "click" of the call disconnecting.
Has this been reported? Is this the best place to report a software bug?
Thanks!
Post relates to: Pre p100eww (Sprint)

i have learned that turning on airplane mode will end the call without a full blown restart. once you turn off airplane mode, you can make calls/send texts/use the web again.

Similar Messages

I've a "bug" with the apps downloading. This one stops at the end and stays like that infinite. The app doesn't appears normally on the homescreen. Someone can fix this?

I've a "bug" with the apps downloading. This one stops at the end and stays like that infinite. The app doesn't appears normally on the homescreen. The app is on the home screen, and its downloading is blocked at its end, without showing the app like it should when it's finished downloadung. Does someone can help me and fix this please?

Hi Tom
Thanks for replying!
I had heard that these switches didn't stack unless everything was identical.
I only tried it at all out of pure desperation.
I've applied and tested every version 3 firmware in standalone mode via a console cable and xmodem.
They either never come up properly receiving decompression errors and reboot constantly in a loop.
Occasionally they stall / jam and stay there displaying the same error with no rebooting.
And twice out of 80-100 times I got it to boot to the username and password screen in standalone mode.
But as soon as I made a change it crashed and started the rebooting cycle again.

Cannont update E70 nad bug with phone code after b...

launch NokiaSoftwareUpdate v1.4.39pl
accept and start update to software 3.0633.09.04 ( using USB cable)
time remaning 15 mintes ... nokia have white screen , during proceed to 9 minutes , and e70 is reset after reset , on e70 screen show :
AFE_TEST_SERVER ,w19_06,(c) NMP
test mode
nokia
update show information with 2 steps about put out a battery ,
after hard reset phone is run but its a problem with PHONE CODE
after i configure a phone i change default code to my code xxxxxx
but after bad update code is reset to unknown code
other bug i found my personal code enter when i change a phone code and enter twice new code show me msg error [-6]
but old code enter correctly becouse if i use another code then after put twice new code show me message a invalid code .

Can you please try generating and re-inserting the FB code on your page. The FB Likebox at the above link doesn't load for me from any of the mobile devices nor through a desktop. You can get the code here.
https://developers.facebook.com/docs/reference/plugins/like-box/
I was referring to the following Facebook Page URL that you are currently pulling the Streams and Likes for - http://www.facebook.com/phillyweddingdj which appears to be invalid. If you generate the code for it at the above mentioned plugin page, the preview doesn't generate. Visiting this link takes you to FB homepage instead.
This is how the Likebox code should look like with minimum customization that you need to insert through Object -> Insert HTML option, notice the highlighted part that needs to be modified with a valid FB Page URL:
<div id="fb-root"></div>
<script>(function(d, s, id) {
var js, fjs = d.getElementsByTagName(s)[0];
if (d.getElementById(id)) return;
js = d.createElement(s); js.id = id;
js.src = "//connect.facebook.net/en_US/all.js#xfbml=1";
fjs.parentNode.insertBefore(js, fjs);
}(document, 'script', 'facebook-jssdk'));</script>
<div class="fb-like-box" data-href="http://www.facebook.com/myfbpage" data-width="292" data-show-faces="true" data-stream="true" data-header="true"></div>
</div>
Thanks,
Vinayak

Is there a WIFI bug with IOS 5?

Ever since I upgraded my iPad 2 to IOS 5, it keeps dropping WIFI. I used to use it for taking online lectures via AdobeConnect. Now, the iPad drops the wifi connection totally 60+ minutes into the lecture. Nothing works to fix it other than time (several minutes) which is not good when watching a live lecture.
It's happening to me every week now. Renewing DHCP lease doesnt work, nor forgetting the network and resetting it - it takes several mins to reconnect and get DHCP address. Every other non IOS 5 device in the house has no issue.
Device had no issue with same network gear before upgrade.

It is also on the iPhone.
Connie99 wrote:
Battery percentage is only available on iPad (no jailbreak). With the device jailbroken, yes it can be on iPod too.

[SOLVED] Bug with GTK apps - Icons didn't render correctly

Hello.
I had been experiencing a strange behaviour of GTK apps at one of my arch systems lately - Icons didn't render correctly (screens attached).
It was not critical for work but frustrating enough. Especially in firefox (notice the half-rendered formulas).
It took me quite some time to figure out that this behaviour was caused by a line
"Xft.rgba:1 "
in my .Xdefaults config. After I commented it out the bug disappeared.
Qt apps were not affected by this.
Besides, on my second arch system it didn't cause any trouble.
So, I'm not sure whether it is a bug or not.
If it is, I'm not sure whether the problem is on my side, in package or upstream.
I've decided to post it just in case somebody experience something similar.
Libs versions are:
gtk2 2.24.22-1
gtk3 3.10.6-1
gtkmm 2.24.4-1
gtkmm3 3.10.0-1
The bug was also present in:
gtk2 2.24.20-1
gtk3 3.8.2-1
gtkmm 2.24.4-1
gtkmm3 3.8.1-1
Last edited by noooway (2013-12-21 07:00:17)

Thanks for the replies guys! For the record it's when I click a window in say lxterminal or pidgin it opens in firefox. I'll take a look through the links you posted and see if I can get it working!

Hover bug with Javascript apps?

I have an HTML/Javascript AIR app that uses the hover event
on certain elements to show/hide them. I've noticed that if the
mouse moves out of the *app window* quickly, the app will not
register the movement and will continue to show the element rather
than hiding it. I'm using JQuery, but I experienced this behavior
even when I wasn't using JQuery.
I've also noticed this behavior on text links where you
specify a different look in CSS depending on whether the mouse is
hovering over the link or not. In this case, there is no
Javascript, just CSS and the behavior is the same. For example, if
you have the following CSS rules:
#myLink { text-decoration: none; }
#myLink:hover { text-decoration: underline; }
The link will have an underline when you hover over it.
However, a quick move off the link and out of the app window will
leave the underline in place.
Is this a known issue and is there a workaround or fix on the
way?

I've had the same issue (if the mouse leaves the application too quickly mouseout events aren't triggered).
In one of my apps I display custom tooltips and it's super annoying to have them laying around.
I use a timer to test for their presence (triggered on mouseover) and remove them after a bit if a mouseout hasn't been triggered. Fine for my purposes but weird for a lot of other things.
I think it's worth reporting here: http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

IOS7 bug with rate app pop-up

After I installed iOS7, my apps freeze when the pop-up to rate the app appears. None of the choices work and the app is basically frozen. Please help!

http://java.sun.com/docs/books/tutorial/uiswing/components/dialog.html
This is the alert box (dialog box)
I think you have to learn from basics.
http://java.sun.com/docs/books/tutorial/getStarted/index.html
http://java.sun.com/docs/books/tutorial/index.html

5800 Wifi Bug??

Hi all, I think there's a bug in the 5800 wifi's connection. After I connected to an access point, it seems that I am unable to disconnect from it, even though the access point is already out of range (few kilometres away!!).
The Connectivity menu still showed "Connected" status. Selecting "Disconnect WLAN" from the Options menu does not have any effect whatsoever. If i tried to connect to another access point, the phone will give error message saying "WLAN connection already active. Close it and try again".
(I think i have the latest firmware e.g. v11.0.008 dated 09/12/08).
So far the only solution is to reboot the phone. Anyone experiencing the same situation? Anyone knows how to hard-killed the wifi connection?
Cheers

Hi all,
I've got the same trouble too.
But I've got also a more critical issue, linked to this wifi bug : my phone shutdown when it's in "stand by" mode.
It is due to the continue wifi connection : when I'm at home, the 5800 automatically connect to my access point, even if I don't use the network.
If I don't use my phone, it goes in "stand by" mode the following minutes.
I tried to find the option to switch off the wifi connection (under Settings > connection > connectivity > WLAN, then option button > parameter, then switch-off network scan. So my phone continue to connect to my access point.
I tried also to change the WLAN settings, in option "use the access point", I switched from "automatic" to "ask confirmation", but the connection is still active automatically, even if I try to disconnect !
I had noticed the same problem with other WLAN that I have authorized access : I had entered the security key in the phone.
The problem seems disapear when I switch off my access point.
For info, my firmware is V 10.0.010 (custom. version is 10.0.010.220.02) - Type is RM-356. - no update possible because it's an operator pack phone...
I hope someone can gives some elements of answer.
Thanks by advance

My wife was looking for me last Friday morning with the app find my phone. The app showed that I was not where I said I was and she does not believe me. How is the explanation for this mistake, I know where I was at but she is very upset.

Please help!!! My wife has a Samsung galaxy 4s, and she was looking for me last Friday (09/19/2014) morning with the find my phone app. I have a iPhone 5S and the app placed me in a location about 5 or 6 miles away from where I was actually at. My wife if very up set and thinks I am lying to her. Is there a way to get here the proper information so she does not have to feel like I am a lier. This is a big problem and I need help. I can get video but it is very expensive and takes a court order. I truly need help with this I have kids and this is problem is destroying our marriage.
Thanks
Greg Soileau

How was your wife using the Find My iPhone app from a Samsung phone? But, that question aside, your wife should educate herself on how GPS works, especially on a cell phone. GPS signals can be interfered with by trees, buildings, clouds. Off by several miles would be unusual, though.
If your wife is tracking your cell phone and not believing what you tell her, you may want to consider counseling as there are some very serious issues that go way beyond the technology.
Best of luck.

Why is my iPhone 5's iMessage not working in wifi connection consistently? (wifi works with apps/web no issues)

My iPhone 5 (newly updated to 6.0.2) will not send messages in iMessage all the time-very inconsistent. The wifi works with my phone when I use apps/search the web with no issues all of the time. For an unspecified time span, iMessage will sometimes send and receive messages, but for the most part will give me the error message: Message Send Failure. My iMessage & facetime is activated on my device for my phone and email addresses. I am in another country currently and solely rely on wifi for my connection and have turned off my data. I have toggled my wifi, turned off my phone, and reset my phone and still haven't had any luck. Any help is greatly appreciated as to why my phone is having these issues in a perfectly fine working wifi connection. (another iPhone 5 user has no issues in the wifi)

Have you tried a complete reset/restore iOS 7?
Back up your iPhone to iCloud and/or iTunes.
Open iTunes and make sure you have the latest version (11.1).
Plug your iPhone into your computer.
On the Summary screen, click Restore next to (Check for Updates). This will reset your phone to factory settings and reinstall iOS 7.
After iOS 7 has been reinstalled, you can restore your back up from iCloud or iTunes.

I loaded ios7.1 to my Ipad2 and my wife's cell phone came up. I can't change it and now I get her text messages on my iphone4S and she is getting apps I download on her iphone 4S. How do we fix it?

I recently downloaded ios7.1 to my ipad and my wife's cell phone # appeared on my ipad. It would not let us change it. Now I am getting her text messages and she is getting the apps I load on her iphone4S. We both have iphone 4S, but she has version 7.1 and I still have 6.0 because I didn't like the changes in v.7.0. We share an Apple ID and password which was not a problem before. My daughter says this is our problem, as she had her husband had this issue. She doesn't know how he fixed it. Has anyone else had this issue and can you tell us how to separate our Apple ID/passwords if this is, indeed, the problem?

If you share an Apple ID, both of your phone numbers should be linked to that ID. You should be able to use your phone number as well. My wife, my daughter and I all share an Apple ID for purchases, and we each text from our iOS devices using our own iPhone numbers.
When iOS 6 came out, you were able to link the phone number with your Apple ID to use for Messages and FaceTime. You will need to sign out of messages on all devices and then start the process all over again.
Take a look at this.
iOS and OS X: Link your phone number and Apple ID for use - Support

This morning Find My Phone alert went off on all my devices connected to my Apple ID at the same time, is this a bug or should I be worried that my id is hacked? I didn't have Find My Phone app installed on many of these devices. Please advice. Thanks

This morning Find My Phone alert went off on all my devices connected to my Apple ID at the same time, is this a bug or should I be worried that my id is hacked? I didn't have Find My Phone app installed on many of these devices. Please advice. Thanks in advance.

If you have enabled Find My iPhone/iPad on your devices, any one with access to your Apple ID and Password can Play Sound on your devices.
Tap to enlarge image.

Contacts tab under Phone app bug in iOS 8.2

Hi everyone,
I heard this bug /error in the early releases of iOS 8.x and faced it personally in 8.2. When you go contacts tab in "Phone" app -this is important because this issue is only in the contacts tab under the Phone app. It doesn't happen in Contacts app itself or an third part app like WhatsApp. As I said only under the Phone app's contacts tab- and type a common name or surname in your contacts ,for example "Kartal" in my case, the app searches this word in your contact list and gives you result. The problem starts here: When you want the select the last result from the search -of course results must over flow the screen- and you scroll your finger down to last result it comes out of the screen when you pull your finger from the screen. Does anyone noticed this and has a solution for it? (I guess this can only be solved by an update)
I may get you confused with my language sorry for that : )
Ali.

I think I see what you are saying - you cannot get to the last results of the search. Yes, it appears to be a bug. Please report it to http://www.apple.com/feedback as we are all just users here and cannot do anything about it. Thanks.

Please advise what might be wrong with my WIFI connection and the app store!

When trying to download apps via the apple app store, it will take ages to pop up with the password box, and then will just time out eventually after giving the me "waiting" icon.
When I disable wifi and connect over 3g the apps will download fine. It cant be anything wrong with the internet connection because my work iphone connects fine and downloads apps without problems (albeit on a diffrent ios version - mine is latest), this phone also goes through the same router.
I've tried forgetting the network AND resetting the network settings i've even restored the entire phone via itunes to factory settings but to no avail - does anyone have any ideas at all - as i'm pulling my hair out!!
P.S - One other thing to add is: once the app has been downloaded with 3g it will work flawlessly with the wifi connection on the phone, its purely just a download issue with the app store!!

Hi there alpilter,
You may find the troubleshooting steps in the article below helpful.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
As mentioned in the article, before you start any troubleshooting make sure your system is completely up to date.
-Griff W.

I am trying to change the Apple ID on my I phone and my Wife's I phone. Is it possible to keep our contacts, calander, and photos by doing this? We do not care about our music or apps. Is this possible?

I am trying to change the Apple ID on my I phone and my Wife's I phone. Is it possible to keep our contacts, calander, and photos by doing this? We do not care about our music or apps. Is this possible?

Photos should be copied to the computer and synced back via iTunes. They are unrelated to the Apple ID unless you are using PhotoStream.
Depending on how the contacts are synced the the device, chaging the Apple ID may wipe them.
Why do you want to change the Apple ID? If it's an email address change, simply change the email associated with the Apple ID. Do NOT create a new Apple ID.

WiFi bug with phone app.

Similar Messages

Maybe you are looking for