Wifi button greyed out and I have updated to ios 7.0.4

I have a 4S using ios 7.0.4 software and my wifi button is greyed out and my phone is not connecting to any known wifi connections. Is there anything I can do to fix this?

I have gone through the router reset for home network, Router reset at work. Restarted my personal hotspot on my iPhone that is running the same IOS.
I have performed the Network settings reset on the iPad.
I have performed a hard reboot on the iPad, (Home button and power button until logo appears)
Also I had to update the Apple driver on my laptop for iTunes to see my iPad after I had updated iTunes, I'm not sure if I lost wifi after I updated the iPad IOS or updating iTunes.

Similar Messages

How can i fix a wifi switch greyed out on iphone 4s updated to ios 7

I was using wifi normally when suddenly it stopped working and i thought something went wrong with the internet connection so i turned both the wifi router and my phone off, when i turned it back on my phone s wifi switch had greyed out and i couldnt do anything about it, i tried resetting the networking settings as if it would work but it didnt, any help please ?

Try this support document. http://support.apple.com/kb/TS1559

My wifi button greyed out...pls help

hi all users,,,my iPhine 4s wifi button greyed out suddenly
tried the temperature trick but problem persists
pls help anyone
thanks

Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you probably have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

About three days ago my ipod said i needed to sync and so i did . when i did it stop working and the wifi is grey out and says no wifi . Ive tried rebooting it , reseting , restarting but nothing seems to work . Can anybody help me ? Please !

About three days ago my ipod said i needed to sync and so i did . when i did it stop working and the wifi is grey out and says no wifi . Ive tried rebooting it , reseting , restarting but nothing seems to work . Can anybody help me ? Please !

Hello Philly,
I believe that when you reset your ipod(command given from the computer, right?) touch WHILE the ipod was updating, It cleared the system in the middle of writing files, thus corrupting(equivalent of cutting of in the middle of a sentence) the basic running system.
I suggest you go to an apple store and ask for a technical diagonosis in person. they may offer to help if the problem is fixable. If your ipod is still under warrenty, i would guess it would be free/low cost.
~Remember, I am just giving an educated guess on limited information

My wifi option greyed out and when i checked out wifi adress it shows N/A . how would i solve this ?

my wifi option greyed out and when i checked out wifi adress it shows N/A . how would i solve this ?

http://support.apple.com/kb/TS1559

I am Using Apple iPhone 4g 32gb and i have Updated to iOS 6.0 but in Maps i am not able to change the angle with two finger why so ?

I am Using Apple iPhone 4g 32gb and i have Updated to iOS 6.0 but in Maps i am not able to change the angle with two finger why so ? I have also restored it but not getting

I have an iPhone 4 also. If you are referring to the flyover view, its unavailble for the iPhone4. If you want to rotate the map, hold two fingers on the map for 2-3 seconds and rotate them in opposite directions.
Hope this helps

I have Iphone4 and my Iphone wifi button greyed out mean not working, Please suggest what need to do.

I have Iphone4 and my Iphone wifi button grayed out mean not working, Please suggest what need to do and i am using ios 6.

Please ask your question

TS1398 After the 6.0.1. update on my iPhone 4s the option for wifi has greyed out and cannot be selected. What can I do to restore wifi?

I have held off updated my iPhone 4s with the 6.0.1 but having problems connecting to wifi I thought maybe being out of date was the problem.
Having done the update the wifi option is now greyed out and cannot be selected at all. I have rebooted, forgotten networks and turned on and off so many times. There is nothing wrong with the wifi at home as other devices connect no problem. What can I do?

I'll repeat the Apple support pages linked in the previous post:
http://support.apple.com/kb/TS1559
Go through the step outlines there starting at the top and work down until you've solved the problem.

HT1695 What if my problem is that it won't let me slide the wifi on, on my phone the wifi is greyed out and won't move

I need help getting my wifi slide button to allow me to turn on my wifi. It is greyed out and won't move to allow me to slide my wifi into the on position.

yes i called them right after i got the phone...it was about a hardware problem...well they would not help me out @ all...so i had to call at&t an i told them about it an i was going to return the phone ...i have been with at&t for yrs...so they called apple with me on the line ...an then an then only was apple trying to help me out.....just not trying to go back there a gain with them.....i think it was all in the update to the 6.0..... i cant even open the part to the setting that has the about the phone....i can open the software updated....
Message was edited by: re88

Why Apple is silent about 4s wifi getting greyed out and not responding to this issue? many ppl suffer from this and this is absurd!

Why Apple is silent about iPhone 4s wifi getting greyed out with iOS updates 8.0.2 and 8.1 and did not respond to this issue officially? Many people are suffering from this affected service. How can you trust us to buy new iPhones when you stop supporting us with the ones we have since they are still upgradable to the latest iOS.
Is there any chance that we will be given the support and would this issue be fixed with any upcoming updates? My iPhone when its battery is drained totally and I start it again the WIFI works until I try to choose another network or somehow I disable it then blackout!
This is definitely a software issue that we never had problems before this update.
Show us that you care for your products at least and provide us with a solution please.

nartal wrote:
That doesn't help at all.. I can only have it enabled if the battery gets drained out totally then when I restart it the WIF is on. then back greyed out.. that is not a serious reply, really!
Yes, it's a serious reply. Did you actually read the information at the link I posted? Especially the last sentence? The fact that it appeared when you updated to iOS 8 has no bearing on the validity of the article. It is not specific to any version.

My wifi is greyed out and won't go on.

Why is my wifi greyed out and I can't turn it on. I tried turning off my phone and it didn't work.

Does that mean I have to get a new phone because I am passed my warranty I have had my phone 1 year and three months. This seems to be the software updates problem and I don't understand why I have to pay for a new phone, this is stupid. If I would of known about this problem I wouldn't of done the update. And to think I thought Apple was good.

Macbook pro wifi symbol greyed out and will not recognize networks

My Macbook Pro has had an issue since this past fall of having its wifi symbol greyed out with an "X". It also does not recognize wifi networks as in simply no networks show up. Talked to Apple last week and they said to upgrade to Yosemite, but I am still having this issue. Help?

Have you used DVDs that have different region codes? It may be that your DVD drive is locked for a region code different from what Netflix is programmed for.
Ciao.

Apply and OK buttons greyed out in console after updating custom lists

Service Manager 2010 SP1
I updated some custom lists that are used in our incidents and now the OK and Apply buttons are greyed out in the console. It's been years since I built this out and I'm hazy on how it all works. I tried putting everything back the way it was but the buttons
are still greyed out. Any new incidents created AFTER I made the changes to the lists are working OK.
Any ideas what happened here?
Any help appreciated, thanks,
Dan

yes, that's usually the reason but as far as I can tell, all of the required fields are filled out and I've even changed each of the fields to see if that would help but it doesn't.
This only seems to be happening with 20-30 tickets that were created before I changed my lists. Newly created tickets are OK.

Can i backgrade my iphone 4s from ios6.0.1 to ios6? - Wifi is greyed out and will not switch on, tried factory reset but keeps restoring to ios6.0.1, please release ios6.0.2 ASAP apple!

So yeah I recently upgraded to iOS 6 fine no problems, a few bugs here and there regarding txt shortcuts not working when imessages switches back to sms when loosing 3g but nothing major.
Then a few weeks ago I updated to iOS 6.0.1 as I thought maybe a few bugs would be fixed. I backed up my phone (for the first time with iTunes). Then after the 6.0.1 update I had (as it seems a lot people have had) a problem with the wifi not switching on and being dimmed out. I tried various "reset the phone" "reset the network settings" options that people have put on these support forums. So my last option was to reset the phone to factory settings- I did this two times, firstly reseting it to factory settings and restoring it to the back up, then reseting to factory settings and setting the phone up as new. After doing this second reset my phone did not go back to iOS 5 (which is factory settings) but iOS 6.0.1 and I still have the same Wifi problem.
Apple- please release 6.0.2 ASAP, this bug is costing me ton of 3g data as I use my iPhone regularly for work and use it at home all the time.
Is there anyway I can back grade to ios5 or ios6?
PLEASE HELP!!
thanks
Martyn

Ok after reading a few posts I relalise you can not down grade os on iphones and never have been able to.
But how come I can't factory reset my phone properly? sure factory reset will mean it will reset the phone and its os to the os that it built with with was ios5?

Software Center Application Uninstallation Button Greyed Out and Deploying an Application with Uninstall switch Fails

Hi,
I tried everything I could find on the internet but no luck so far. I can successfully deploy MS Visio 2013 to the clients. I also want to be able to uninstall it from the clients. On the client machine Uninstall button is greyed out. This deployment is
installed as "Available" and there is only one deployment type within that MS Visio 2013 Application.
I tried the following uninstall commands in my deployment:
setup.exe /uninstall
setup.exe /uninstall
VisPro
/config .\vispro.ww\uninstallvisio.xml
“\\SRVSCCM2012\Sources\MSApplications\MSVisioPro_2013_64Bit_ENG\setup.exe” /uninstall VisPro /config "\\SRVSCCM2012\Sources\MSApplications\MSVisioPro_2013_64Bit_ENG\vispro.ww\uninstallvisio.xml"
\\SRVSCCM2012\Sources\MSApplications\MSVisioPro_2013_64Bit_ENG\setup.exe /uninstall VisPro /config \\SRVSCCM2012\Sources\MSApplications\MSVisioPro_2013_64Bit_ENG\vispro.ww\uninstallvisio.xml
I checked Product ID from Setup.xml and I know it is correct. My uninstallvisio.xml' content is below:
<Configuration Product="VisPro">
<Display Level="basic" CompletionNotice="yes" SuppressModal="yes" AcceptEula="yes" />
<Setting Id="SETUP_REBOOT" Value="Never" />
</Configuration>
Last night, I downloaded and installed Cumulative Update 1 for SCCM 2012 R2 and I haven't tried the deployment after the update,yet. I will try it today but please let me know what else to check.
Yavuz Selim Atmaca

After I updated SCCM Server and test client pc with CU1 , I tried to deploy visio as Required. It installed successfully. Then I uninstalled visio by deploying the application with Uninstall Action.
After that I tried to deploy visio as "Available" to see if Software Center Uninstall button works. However visio deployment does not come to Software Center's Available Applications List. I check the status of the deployment under the Deployments monitoring
node and it says Success "Already Compliant". I dont know what it means. Does config manager thinks that visio already installed?
Yavuz Selim Atmaca
2 or 3 hours later that -Succes "Already Compliant"- status of the deployment under the Deployments monitoring node is vanished automatically and Software Center application list showed the new deployment. I installed it and uninstalled it succesfully.
So, you are right Solution is the CU1 but I am still wondering why my available deployment took so time to be visible in Software Center althought I didn't enter any schedule to be available.
Yavuz Selim Atmaca

Wifi button greyed out and I have updated to ios 7.0.4

Similar Messages

Maybe you are looking for