Wifi Button Not working

I have (unfortunately) iphone 4S 16GB IOS 8.1.2.
As i updated the Personal Hotspot was gone.
It was working good but then the WIFI toggle Got grayed out, got unavailable...
I have restored Network Setting, but no use.
I have tried All Reset that you have given there but it didn't work.
Can u call me?? *******
<Personal Information Edited by Host>

Sorry, but it looks like your device getting replaced by Apple is the only option if you want a phone that is working without problems.
But, since your device is out of warranty, you'll have to pay the Out-Of-Warranty-Service fee:
Out-of-warranty repair service
If your repair isn’t covered by Apple’s One Year Limited Warranty, AppleCare+, or AppleCare Protection Plan, your iPhone might be eligible for out-of-warranty service. For example, liquid damage isn’t covered by warranty but might be eligible for out-of-warranty service. Some damage isn’t eligible at all, for example if your device has been broken into multiple pieces. See Apple’s Repair Terms and Conditions for complete details.
Read Apple’s Repair Terms and Conditions
Model
Out-of-warranty service fee
Battery service*
iPhone 6 Plus
$329
$79
*available only if battery
fails Apple’s diagnostic test
iPhone 6
$299
iPhone 5s, iPhone 5c, iPhone 5
$269
iPhone 4s
$199
iPhone 4, iPhone 3GS, iPhone 3G,
Original iPhone
$149
Plus a $6.95 shipping fee, if required. Fees are in USD and exclude local tax. Pricing is for service through Apple. The final service fee we charge will be determined during testing and may be less than the service fee listed above. Pricing and terms vary for service through an Apple Authorized Service Provider.
copied from: Service Answer Center - iPhone

Similar Messages

  • My wifi button not working

    my wifi button not working. i can't working any body can help me

    Wi-Fi button greyed
    http://support.apple.com/kb/ts1559

  • Hp655 AMD E2-1800 APU wifi button not working

    hp 655 E2-1800APU wifi button not working

    The Phone, depending on the application, CAN share the WILAN connection, but sometimes some apps refuses to share it. This is why Nokia should be fixing this issue by ensuring that everyone goes to the same Network procedure and to ensure that no only application can lock that access.
    N-95 8GB, Wish Nokia made a 3G World Phone.
    Release a 3G HSPDA 850/900/1800/1900/2100 and Quad Band GSM phone instead!

  • Wifi button not working despite ios restore

    wifi button isn't worked.
    tried network restore, tried full restore, tried re-installing i06. all failed to repair. any ideas?

    Ralph is right about the airplane mode. Weird solution, but it works. I had the same problem and googled it and saw that before. This week it happens again, and the airplane mode thing didnt work so I had to go to settings, general, reset, and reset all settings. This is not a factory reset like it is on iTunes, so don't worry, nothing isn't gone except your pic on the wallpaper. Then wifi button is back, but don't forget to go through all your settings and put them back the way you like. ;)
    Unfortunately, I've had this problem alot in the past two days and it is also shutting down by itself. I've also deleted the cookies and it don't bed an update, so I'm not sure why it keeps acting up this week :(

  • Wifi button not working windows 10

    satellite a665 s5186: Windows 10 upgrade. Eco, wifi, turn lights on,off, pause/play, mute, turn touch pad on/off not working. + and - volume keys work. Wifi is my priority (all others irrelevant).   fn+f8 or f8 not turning wifi on. Device Manager recognizes Intel(R) Centrino(R) Wireless-N 1000, can't turn wifi on. Is there a driver for these buttons or is there a way to turn wifi radio on with out keyboard button?  Currently installed driver Intel(R)PROSet/Wireless Wireless_16.11.0_Ds64 (version 15.11.0.7). A USB wifi adapter working fine.Thank You.

    C:/Program Files/TOSHIBA/TBS/TBSWireless.exe  Double click the TBSWireless.exe application, this will manually turn wifi on and off. I will try some other things in a attemp to regain button function. I will let you know if I'm successful.

  • TS3772 wifi button not working

    hello, the wifi of my iphone 4s is not working, when ios 5.1.1 installed ... greyed out, i even cant switch it on,
    Message was edited by: Rajeesh.a.d

    I tried all of that. And nothing worked but iread somewhere that some people have put their phones in the freezer and the fridge and they worked! I didn't do that but when i went out twice yesterday in cooler weather the phone started working! And it's been working since then but when i made a 10min phone call and it heated up wifi switched off again! Bizarre.
    Thanks for your help.

  • TS1398 hi,i have just update my soft wear but my wifi is grayed and wifi button not working

    Hi, I have just update my iphone but my wifi grayed and not working

    APPLE PLEASE!!!!!!
    WE NEED ANSWERS!!!!!
    WHEN YOU WILL FIX IT THIS HUGE ISSUE!?!?!?!?!?!?!?!!?
    I LIVE IN BRAZIL AND HERE DON´T HAVE AN OFFICIAL APPLE STORE!!!!!
    WE NEED A SOLUTION FASTER!!!!!!

  • Wifi button not working iphone

    I need help

    Hello mvsm
    Start your troubleshooting with the articles below to resolve issues with Wi-FI.
    iOS: Wi-Fi settings grayed out or dim
    http://support.apple.com/kb/ts1559
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Regards,
    -Norm G.

  • TS1559 halooo sir/madam,I am using iphone4s,after update ios 7 my device wifi is not working wifi button also not enable pls give me the solution

    i am using iphone 4s,after update ios7 the wifi is not working and wifi button also not eneble its dimmed pls give me the solution.

    http://support.apple.com/kb/ts1559

  • HT201412 my ipod 4G power button and volume button not working after updated to ios6. i also experience wifi issue. so deppresing!

    my ipod 4G power button and volume button not working after updated to ios6.
    i also experience wifi issue. my ipod can't detect any wifi signal.
    so deppresing!
    what should i do?
    i can't put my ipod to sleep, can't adjust volume, can't shut off.
    should i update to ios 6.1?
    HELP

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar
    When iOS 6.1 comes out I would update.

  • Wifi Sync not working on iOS 6 and iTunes 10.7 with iPhone 4S

    I am running Windows 7 64-bit but WiFi Sync is not working on either my iPhone 4S or my wife's iPhone 4S.  Worked fine before upgrading.  All settings look correct in iTunes 10.7 and on our iPhones 4S's.  Already tried uninstalling iTunes and all associated Apple programs (Bonjour, Apple Mobile Device Support, Apple Application Support, etc) and reinstalling iTunes but no help.  Temporarily disabling Norton Firewall did not help.  If I hook up either of our two 4S phones via USB wire, they Sync and Backup fine.  Just WiFi Sync not working.  Can't initiate sync from iPhones because button is ghosted stating it is waiting for PC to be present.  Phones don't show up under Devices in iTunes unless hard-wired via USB cable.  Any suggestions?

    I am getting sync issues too (although on OSX) - seems like others are getting issues too:
    https://discussions.apple.com/message/19834721#19834721
    Good luck,
    Chris

  • My iPod Touch 3rd gen is screwed up the backlights screwed and the Wifi is not working its showing no wifi! What should i do??

    My iPod Touch 3rd gen is screwed up the backlights screwed and the Wifi is not working its showing no wifi!

    See:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
    Settings > AirPlane Mode ON, Do Not Disturb ON
    Power down and wait 5-10 minutes
    Power up
    Settings > AirPlane Mode OFF, Do Not Disturb OFF
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar
    For backlight
    - Reset the iOS device. Nothing will be lost       
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                  
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.                     
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      

  • Wifi is not working properly once i updated to the new operating system.

    My I pphone 4s wifi is not working properly once the softwere is updated to the new IOS.
    It shows the wifi but when selected its says "unable to connect". I tried connecting to many wifi networks but gives the same error message.
    Kindly advice how to rectify this

    I am trying that and itunes says that you have to have icloud backup off. My icloud "button" is a whiteish green and does not respond to touch. I can't turn it off.

  • Music buttons not working in lock screen on my iPhone 4 after iOS7 update.

    After I updated my iPhone 4 to iOS7, the music buttons like PLAY, REWIND and FORWARD are not working in the locked screen as well as on swipe up menu. Any resolution please?

    hi there
    i had a problem with my wifes iphone 4s, today morning while travelling to work i changed a setting on repeat option and changed it to repeat artist, it was fine until when i finish my work and on my way back i found songs are not playing anymore, lots of stop signs next to my song list, play/pause button not working, album arkwork keep moving from one to another on its own, so after i reach home i try to do some research on Apple support communities, try to soft reset my phone closing all the apps on background didnt work, also note that control centre music player was not working as well. none of the solutions worked. after trying for two hours i found out that the trouble is in repeat options , so i changed it from repeat artist to repeat off. and the music start playing as usual, but i still have those stop buttons next to the songs i tried to play earlier. At least it fixed temporarily. please also note that in the meantime i tried to sync my phone with the pc and suddenly its start syncing all the songs again assuming there were no songs on my iphone.  so guys i think soft reset might not help all the time but try to remember what settings you changed recently and change it back to the original option, not sure ,but it might help.

  • Network controller​, pci device, wifi drivers not working

    my device model is dv6-6121tx
    i am not able to install network controller and PCI device drivers...
    also my wifi is not working..
    no wireless adapter in device manager..
    please help...
    This question was solved.
    View Solution.

    Hello again samyak.  You are very welcome!
    The first device (the virtual adapter) is virtual network which allows you to use the computer as a "software router."  Unless you're using this PC as an Access Point this device is useless to you.  This article has more information on the service.  Your best bet is to just disable it.  Try the following.
    Click Start, go to "All Programs," and select "Accessories."
    Right click on "Command Prompt" and select "Run as Administrator."
    Type the command "netsh wlan set hostednetwork [mode=disallow] and press Enter.  This should disable the virtual adapter.
    Exit Command Prompt, reboot the computer, and verify that the device is no longer listed.
    The device with the "ACPI/HPQ0004" ID actually returned two results.  The first was the Quick Launch Button software.  The other was related to Hard Drive Protection.  Try this driver.
    Make sure to reboot after all of these instructions have been completed.  Then go back to Device Manager and verify whether everything looks as it should.
    Continue to have a great day!
    Please click the white star under my name to give me Kudos as a way to say "Thanks!"
    Click the "Accept as Solution" button if I resolve your issue.

Maybe you are looking for

  • Transfer data from a bean to another bean

    Hi, all of you, I have two Java bean classes A and B (they are automatically generated from the same xsd but under two different packages). A and B have the same structure by their construction. Now my problem is to transfer data from an instance of

  • Setting minimum length of a text field

    Forms [32 Bit] Version 10.1.2.3.0 (Production) Oracle Database 10g Enterprise Edition Release 10.1.0.3.0 - Production With the Partitioning and Data Mining options Oracle Toolkit Version 10.1.2.0.2 (Production) PL/SQL Version 10.1.0.5.0 (Production)

  • Getting errors in dbms output

    Hi All, I've written a function to calculate the value for QTD, Previous QTD, YTD and Previous YTD, by giving the parameters of Date, Table name, FilterCol(Date Column in the table), Column name to calculate... --------------------------The function

  • Getting duplicates in w_psft_payroll_f_tmp table

    Hi All, I am trying to run SDE payroll mappings.SDE_PSFT_Payrollfact session failed due to duplicates in the table.When I looked at source tables I found that w_psft_payroll_f_tmp table as duplicates whch is coming from SDE_PSFT_PayrollFact_Earnings

  • Maximize and closing browser window

    Hi all. I have two problems. I'm running a form in separateframe =true. I want to maximize the browser window. How can I do this??? The second problem: how can I close the browser window? I have create a post-form trigger and I put this code: web.sho