WIFI Calling - outgoing volume is very low

Hello, I was recently given a Samsung S5 from my work for business use.I work reguarly from home, and the coverage is poor from inside my house! I recently looked on the EE website and found that i could upgrade the software on my phone to enable WIFI calling.I managed to do this which was very straightforward. The problem is now that although i can receive and make calls very easily through WIFI, the outgoing call volume is very low and people are struggling to hear me properly. To check it was WIFI causing this, i disabled WIFI and made the call again in an area of my house where i can get some reception. The volume was fine. So the issue is clearly with WIFI calling. I am not aware of a way to adjust my outgoing voice volume but i hope you can help.This causes me alot of issues and unecessary stress. I look forward to hearing from you. Regards Alan Craddock

I think I may have stumbled onto a fix. When looking at the call settings to type my post, above, I noticed there was a check box to enable/disable 'Noise reduction' (cuts out background noise, apparently). This was on. I switched it off, and the volume on WiFi calling is now OK. To find this setting in Android, go the the call screen, choose 'Settings', then 'Call'...uncheck the box labelled 'Noise reduction'. Hopefully there's some equivalent setting for those of you unfortunate enough to be using an Apple device ;-) Crash

Similar Messages

  • Iphone 5c call volume is very low. Any suggestions?

    My iphone 5c call volume is very low. While on a call, I can barely hear the person on the other line. It sounds like they are at 25% volume when the volume shows it is at 100% volume. They can hear me fine. I have tried resetting/restoring several times, the call volume is all the way up, and have even tried messing with the accessibility-->hearing aid setting. The only way to get by it right now is to have it on speakerphone, which works fine. This happens with every person I have talked with, even landlines. Any help greatly appreciated.

    Hello tjmzero,
    The following article provides some useful troubleshooting steps that can help resolve issues with your receiver.
    iPhone: Receiver and call audio quality issues
    http://support.apple.com/kb/TS5196
    Cheers,
    Allen

  • With volume addjusted accrdoin ly in my I tunes program volume is very low any other music program is much louder

    Volume is very low in my I tunes library all other music programs it is much louder

    WInchesterAA wrote:Yeah.. everything passed.
    I am asking whether the volume level in the speaker test in the Speaker Settings software is OK.

  • HT204370 the volume is very low on downloaded movies from itunes, and my volume is turned up all the way, and my volume is fine all other times???

    My volume is very low when I download a movie from itunes, and my sound is turn all the way up.  The volume works fine on everything else.  It's really hard to even watch the movie and enjoy it.  Why is this happening?

    Morning Al My issue has since been resolved after some advice from a friend. It was simple, push the optical cables in firmly until they click, however mine didnt click but there was definatley room for them to be pushed in further as if they are loose they "leak".  in addition to this on the TV settings, make sure that the TV speakers are turned off

  • I'm trying to play MIDI files in Quicktime. It works buy the volume is very low, even with both Quicktime and computer volume on max. What can I do?

    I'm trying to play MIDI files in Quicktime. It works buy the volume is very low, even with both Quicktime and computer volume on max. What can I do?

    I'm having the same issue.  After opening Audio Midi Setup in Utilities I noticed that the master volume slider of the Built-In Output is very low.  I am not able to slide to get any more level out of the system.
    Can you adjust the master volume on your system?

  • I have a new iphone6+  and have paired it to my 3 cars. When playing music from my iphone, the volume is very low and I have to turn the car volume to max to listen. I had no issues with previous iphone parings. Pls help.

    I have a new iphone6+  and have paired it to my 3 cars. When playing music from my iphone, the volume is very low and I have to turn the car volume to max to listen. I had no issues with previous iphone parings. Pls help.

    Sorry if this is too basic or confusing
    Apparently in iOS 8 there are different volume settings for different applications
    The setting on the home screen does not carry over to Pandora for example and it is different ( or at least appears to be) for the in-car experience.
    So I would try to stream the music when not in the car - see if you can turn the volume up and then try again in the car
    Please let us know what happens
    Thanks

  • HT1849 hello i downloaded an album on my iPad yesterday but the sound volume is very low. Can you help me to fix the problem ?

    hello i downloaded an album on my iPad yesterday but the sound volume is very low. Can someone help me to fix the problem ?

    Hello Kishore1022,
    It sounds like you have a new album downloaded and the tracks all have a very low volume. I recommend checking to see if Sound Check is enabled in the Music settings.
    iPad User Guide
    http://help.apple.com/ipad/7/#/iPad99f37037
    Go to Settings > Music to set options for Music, including:
    Sound Check (to normalize the volume level of your audio content)
    You can also try downloading the purchases onto a computer, with either of these articles depending on your version of the operating system:
    iTunes 11 for Windows: Download previous purchases from the iTunes Store
    http://support.apple.com/kb/PH12491
    Or
    iTunes 11 for Mac: Download previous purchases from the iTunes Store
    http://support.apple.com/kb/PH12283
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • HT4623 My ringer and music volume is very low!! The problem just started today can someone help?

    Can someone one help me, I just started having problems with my volume. My music and my ringtone are very low!

    As a first step, do a hard reset by holding down Sleep/Wake and Home buttons until you see the Apple logo on the screen. If a red power slider appears on the screen, just ignore it and keep holding the buttons down until you see the Apple logo.

  • HT1222 my husband didnt realise that he had up graded to iso7 and having big problems volume is very low now how can he get back to what he had

    has anyone else who have upgraded to this found that the volume is as loud and how do you close apps i like my husband am very confused and dont intend to upgrade my phone to this

    Hi.
    I do not know if my bios is correct one but i did not have the problems like you.
    I think you can try
    Picture before backup
    But i provide file only...all you do with them is at your own risk
    65CN15WW
    i used to backup : Universal bios backup utility
    EDIT: i tried to reflash 65CN15WW by using autoexec winflash variables i get message EFI error unsupported BUT after that i only ran winflash.exe and set to only flash new bios option. Then select bios file to flash click on flash new file button and pray
    After restart my BIOS still working i don't tested it with 65CN13WW but you can try if it helps.
    i think this settings creates problems with invalid bios image
     and i flashed using this 
    Lenovo IdeaPad U410, Core i7 - 3517U, 8GB RAM 1600 MHz, 1 TB + 24GB SSD HDD, BIOS: 65CN15WW
    Windows 7 Home Premium -> Windows 8 Pro RTM (upgraded without problems)

  • How to set input volume - currently very low results

    Hi there, I hope someone very kind and patient reads this and comes to my rescue.
    I am a singer / songwriter and am trying to set my laptop up so I can make simple recordings of my ideas. I therefore want to input vocals and guitar. I currently have a SM-68 dynamic mic but am thinking of getting a Samson G-Track condenser mic which is USB and has a built in audio interface so that a guitar may also be plugged in.
    I have gone into Sound Preferences and selected line-in.
    Rigged up my mic using a cable bought at the Apple store.
    However there is very little volume on the resulting recording.
    I have turned everything up to the maximum but this has made no difference.
    I wanted to keep the set up simple (and am on a tight budget) so I haven't got an audio interface.
    Could anyone talk me through the best way to set up - I am not very technical so can you avoid jargon as my poor brain may overload.
    If anyone has any info on the G-Track I would be grateful for any feedback. I am told that you can plug a guitar into it as it contains an audio interface.
    My fingers are crossed that my knight in shining armour with give me some sound advice.
    Many thanks

    http://www.bulletsandbones.com/GB/GBFAQ.html#micline

  • IPod 4th Generation music volume is very low?

    My iPods music is very quiet with and with out headphones in. I'm the type of person who would rather my music be very loud... I can barely hear it now. Please help.

    Try another pair of headphones
    Go to Settings>Music and see if a Volume Limit is set. That only applies for headphones.
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar              

  • HT200131 When I connect my MacBook Air to my TV using Apple TV, the audio stays on my MacBook and does not transfer to my TV. Thus the volume is very low when I am watching a Movie on my TV and I have to listen to the volume from my laptop. How can I fix

    When I connect my MacBook to my television using Apple TV the audio stays on the MacBook and doesn't transfer to the TV. How can I make it so I can hear the Movie or Video through my TV's speakers and not my MacBook's?

    This is called "extended desktop mode".  It's an extension of the desktop off to the right (by default) of your MBair screen.  Grab an app and drag it off the right side of your MBair screen and it will appear on the TV.
    To mirror your MBair screen on the TV you can press Command F1.  This will toogle between mirror and extended desktop.
    You can find all the settings in System Preferences > Displays > Arrangement tab.
    Regards,
    Captfred

  • My speaker volume is very low now that I did the most recent update

    I recently did an update on my 4s. Since the update, I can barely hear people talking to me on the phone. I cannot have any background noise at all. i have used the buttons on the side and the volume does not change.

    Check to see if you are both using the same Apple ID for iMessage.  If you are, one of you should go to Settings>Messages>Send & Receive, tap the ID, sign out, then sign back in with a different ID.  (You can continue to share the same ID for other services such as iTunes.)

  • Why has my autocorrect volume become so loud, even with volume setting very low? Anyway to adjust?

    Autocorrect volume is too loud; even with volume turned down,

    Hi,
    One thing can help is the following.  Right click the speaker icon in the Taskbar and select 'Playback Devices'.  Left click the default device once to highlight it ( it's usually 'speakers & headphones' ) then click the Properties button.  Click the Enhancements tab and put a tick in the box next to 'Loudness Equalization'.  Click Apply to save the change and then click OK in all remaining windows and see if this has helped at all.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Cant hear caller/volume very low?

    I just got my new iphone 4s today and straight away theres a problem.... when i call someone or they call me the volume is very low even when I have it turned up high, the few calls I have recieved I have had to put them on loudspeaker to hear! Definitely not impressed :-S Any ideas?

    Have you removed the protective plastic film from over the earpiece speaker?

Maybe you are looking for

  • Passing correct image-file path in flashVar from jsp into embedded Flex application

    I have an application that embeds an image viewer, written in Adobe Flex within a jsp page running in a J2EE application on Tomcat 5.5. The Flex code is a one-line modification of the application displayed at ( http://www.adobe.com/devnet/flex/sample

  • Question Marks and Missing pieces in XML documents

    Hi there, I am using FM 10.  I have set up a conversion table to apply DITA structure to documents, with the intent of saving them as XML docs.  Unfortunately, after I do this, the XML docs are coming out a little strange...with ? added, with text an

  • Why duplicates in my_SELECT statement-Small issue in SQL

    Hi Experts, I hv follwoing SQL, but, in some cases, am getting duplicates......any clue? is it bcoz, am using BSIS first and then BKPF(Header) as second? SELECT s~hkont          s~belnr          s~bschl          s~shkzg          s~dmbtr          s~ko

  • Why am I getting all these emails

    Why am I getting all these e mails 1000s

  • Ipad retina disabled and will not update.

    Connected to itunes and tried to restore and update through recovery mode. Each time 3 mins before the update is complete the ipad turns on and isn't updated. Never unplugged. I've already tried updating itunes PLEASE HELP!!! I feel like it just gets