WiFi cannot be found after updating.

Just updated my Apple TV after it's been unused for several months. Just before the update it was all working fine and connecting to the wifi.
Updated, restarted, now it cannot find any wireless networks.
If i restart the ATV, it connects just fine but then drops connection after about 10 seconds and then reverts back to not being able to find any networks.
Ay ideas?
Thanks,

Hello mtbkr81,
Welcome to the Apple Support Communities. If you are experiencing Wi-Fi issues with your Apple TV, then the following article will have troubleshooting steps to sort you out.
Apple TV: Troubleshooting wireless connections
http://support.apple.com/kb/HT1595
Regards,
-Norm G.

Similar Messages

  • Required file cannot be found to update ipod

    required file cannot be found to update ipod
    I recently had my hard drive crash and lost everything. I had all my music and photos on my ipod photo 60GB. I used a free version of ipod agent to transfer all my music and photos from the ipod to the pc (operating system XP). I placed all the music and photos on a back-up internal F drive, Which successfully worked. I then installed i-tunes. My music and photos were transfered into the new i-tunes program and I could play them. however, some songs were not transfered due to a message saying the songs were not authorized to play on this computer. When I tried to up-date my i-pod ,a message came back saying the ipod could not be updated because required files cannot be found. I then used ipod updater and retored the ipod to factory settings and deleted all the music on it. I also deleted all music in the itunes program and re-installed i-tunes. After re-installing i-tunes and ipod with all new updates, I again placed all music from my back-up drive F. Only 5,645 out of 7,255 were recognized. All my photos did transfer over correctly. A message said the others were not copied because they were not authorized to play on the computer. I got to this point twice and started to transfer the songs. but both times when copying music, by the time artists in the Cs' came a message came-up stating "the ipod could not be updated the required file cannot be found" My questions 1. why can I see the songs in the "f" drive and p[lay them from there but not have them all transfer into i-tunes? 2. What file I'm I missing that enables me to update my ipod? The message does not tell me the specific file
    ipod photo color 60g Windows XP

    The missing files referred to are the music files themselves, i.e songs.
    Have you told iTunes where to look for your music folder? Go to edit/preferences/advanced/general and look at the location in the box 'iTunes Music Folder Location'.
    Also, you may need to authorize the computer for any iTunes purchased music.

  • My iphone 4s wifi and bluetooth problem after updating ios 8? please help me...

    my iphone 4s wifi and bluetooth problem after updating ios 8? please help me...

    Hey there Abdulrahim0259,
    I would recommend that you use the following 2 article to help troubleshoot the Wi-Fi and bluetooth issues you are seeing, respectively:
    iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
    And:
    iOS: Troubleshooting Bluetooth connections - Apple Support
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • TS4002 Cannot locate iCloud after updating to iOS 6

    Cannot locate iCloud after updating to iOS 6 on my iPad 3

    Disable all restrictions in Settings > General >Restrictions

  • Unable to connect to internet using wifi and lan cable after updating to windows 10

    HI Team,                   After updating to windows 10. I'm unable to find wifi and lan connectivity in settings->internet . I m trying all stuff to resolve the problem, But i'm unable to to do it . Please help me with this. I cannot attach screen shots over here if possible i could send screen shots if any of the e-mails id's available

    Hi there ,  Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I understand that you are having an issue with your Wi-Fi on your HP Envy M6-1125dx.  I did some research and found a great document for your called HP PCs - Troubleshooting Wireless Network and Internet (Windows 8). This document will help you troubleshoot the Wi-Fi issue.  Have you received any error messages? If you are receiving any of these errors:Internet Explorer cannot display the Web page.Work Offline: No connection to the Internet is currently available.Not connected: You are currently not connected to any networks.Here is another document called HP PCs - Resolving Broadband Internet connection problems (Windows 8).  Have you tried to Restore the BIOS? Have you uninstalled the driver in the Device Manager?If not, please do the following: 1. Uninstall the driver in Device Manager2. Restart the Notebook3. Reinstall the driver. You can use either the HP Driver's page for your specific Notebook, or you can use the HP Support Assistant. 
    Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system at the time of purchase or that need updating. Have you tried to directly connect to the Modem/Router?  Please follow the troubleshooting steps and re-post with the results and information required from the questions above.  Thanks!

  • TM backup disk cannot be found after Snow Leopard install

    Message from elsewhere re-posted here after helpful advice from Apple Discussions Team.
    Just installed Snow Leopard (with TM switched off though not unplugged) and got all the software updates available. I re-installed the TM installation disk. Everything went ok until I wanted to restore from my Time Capsule. I switched the big switch on. TM is continuing to make backups but when I want to locate folders to restore TM won't go back further than the day I installed Snow Leopard. Having selected the TM disk and entered the password the dialogue tells me that the TM backup disk cannot be found and offers me the select disk dialogue again. I have gone through the unplug/plug routine.
    Through Migration Assistant I tried the contents of my Pictures folder (including all my iPhoto libraries) but it just supplied an empty folder. Since I didn't migrate at the time of the Snow install I wonder whether it was migrating the earliest backup it had made after the Snow install. This would make sense if "the Time Machine backup disk cannot be found", as the dialogue keeps telling me.
    Anyone any ideas?

    I'm not sure just what you did.
    Did you reinstall Snow Leopard? Did you do a full restore?
    First, just re-select your Time Capsule in TM Preferences.
    If that doesn't help, try a "Full Reset" of TM per #A4 of the Time Machine - Troubleshooting *User Tip* at the top of this forum.
    If that doesn't help, see #E2 there.
    If still no help, use the Finder to see if you have two sparse bundles on your Time Capsule. If so, try mounting one manually by double-clicking it, then using the Browse option per #E2.

  • Wifi connection alway disconnect after update to iOS6

    After update to iOS6 for a month, I found the wifi connection alway disconnect and need to reconnect severaly times. Plese help to suggest for setting up.

    Hello there cyldevil,
    I would recommend using this article if the Wifi is grayed out in settings.
    iOS: Wi-Fi settings grayed out or dim
    http://support.apple.com/kb/ts1559
    Here is also some additional info on troubleshooting wifi in general on your device from iOS: Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/ts1398
    Be sure that you are in range of your Wi-Fi router (access point).
    Tap Settings > Wi-Fi and turn Wi-Fi off and then on again.If unable to do so, see this article.
    Confirm that your Wi-Fi router and Cable or DSL modem are connected to power, turned on, and indicate that they are connected to the Internet.If not, refer to your network administrator or ISP for assistance.
    Restart your iOS device.
    Tap Settings > Wi-Fi and locate the Wi-Fi network to which you are connected. Then tap > and Forget this Network. Try to connect to your desired Wi-Fi network again.
    Note: You will need to enter your Wi-Fi password again if your desired network requires one.
    Turn your Wi-Fi router off and then on again2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    Update your device to the latest version of software.
    Update your Wi-Fi router to the latest firmware2.For AirPort Base Stations, see this article for information about firmware updates.
    All the best,
    Sterling

  • Second AirPort Express Basisstation not found after update

    Hello!
    I'm trying to set a second AEBS in client mode (as defined on http://docs.info.apple.com/article.html?artnum=108040), because I want to use it for AirTunes while I'm connected to the Internet thru the other AEBS I've had.
    I'm following the instructions founded in the support-sites: I do a hard reset for my second AEBS and then configure it with the AirPort Utility (latest version) to use the existing network of my first AEBS.
    Everything is ok *ONLY if I let the network unprotected*!
    As soon as I try to use some kind of protection (thru WPA/WPA2 and password or by hiding the name of the network or even restricting the computers aloud to access the network thru the MAC-adresses), the second AEBS couldn't be founded anymore after the update.
    I've tried this from my MacMini PPC running Leopard and from a pre-latest MBP running Tiger ... both succesless!
    Do you have any advice?
    Thanks!
    Regards,
    Vlad
    P.S. Here are the settings for my two AEBS ... in german (sorry!):
    The first AEBS:
    AirPort Express-Name: BS1
    Basisstation-Status: Normal
    Version: 6.3
    Seriennummer: ...
    AirPort-ID: 00:11:60:2E:7D
    Ethernet-ID: 00:11:60:2E:7C
    USB-Drucker: LaserDrucker
    Drahtloser Modus: Drahtloses Netzwerk anlegen
    Netzwerkname: NW1
    Schutz: Persönlicher WPA/WPA2
    Kanal: 1 (Automatisch)
    Drahtlose Clients: 1
    Verbinden über: PPPoE
    IP-Adresse: 85.182.10.203
    Netzwerkname: NW1
    Sendermodus: 802.11b/g-kompatibel
    Kanal: Automatisch
    Schutz: Persönlicher WPA/WPA2
    Optionen für drahtloses Netzwerk:
    Multicast-Rate: 5,5 MBit/s (but I have also tried with 2 MBit/s)
    "Als geschlossenes Netzwerk anlegen" is choosen (but I've tried also without)
    "Störunempfindlichkeit aktivieren" is choosen (but I've tried also without)
    The second AEBS after the hard-reset and before update:
    AirPort Express-Name: BS2
    Basisstation-Status: notLocalized (ist auch gelb)
    Version: 6.3
    Seriennummer: ...
    AirPort-ID: 00:11:24:EB:58:C5
    Ethernet-ID: 00:11:24:EB:58:C5
    Drahtloser Modus: Mit drahtlosem Netzwerk verbinden
    Netzwerkname: NW1
    Schutz: Persönlicher WPA/WPA2
    Kanal: 6 (Automatisch)
    Verbinden über: Drahtloses Netzwerk
    IP-Adresse: (leer)
    Drahtloser Modus: Mit drahtlosem Netzwerk verbinden
    Netzwerkname: NW1
    Schutz: Persönlicher WPA/WPA2
    Passwort habe ich eingetragen
    Optionen für drahtloses Netzwerk:
    "Störunempfindlichkeit aktivieren" is choosen (but I've tried also without)
    Verbinden über: (inaktiv)
    IPv4 konfigurieren: DHCP verwenden
    IP-Adresse: (leer)
    Teilnetzmaske: 255.255.255.255
    everything else is void
    "AirTunes aktivieren" is choosen
    P.P.S. After clicking on "Update" I receive the following error-message:
    "Das AirPort-Dienstprogramm kann Ihre Basisstation nach dem Neustart nicht finden.
    Die Einstellungen für diese Basisstation wurden erfolgreich aktualisiert. Es gab jedoch ein Problem beim Verbinden mit dem drahtlosen Netzwerk oder die Basisstation wurde nicht gefunden. Wählen Sie Ihr Netzwerk aus dem AirPort-Menü und versuchen Sie es erneut."

    Same problem here:
    I disconnected one of my apx from power and now
    I'm not able to configure it.
    After updating the APX, the Airport Admin Utility cannot find
    it anymore...

  • Cannot send email after update on iphone 5

    cannot send email from one account after update,  states my password and/or user name incorrect.  I have it written down,it's not incorrect.

    After the iOS 7 update, in order to send email from my iPhone5 and my daughters (also from our iPads) I had do follow Apples reset instructions. Hold the HOME buttton and the START/AWAKE button until your device restarts and you see the Apple logo when your device restarts. You do not have to swipe the message bar which shows up sometimes as your iPhone is shutting down. Sadly to say, but on my daughters iPhone 5, I had to do this 5 times.
    If you live near an Apple store, make them do it so that someone at Apple will send a fix for other people. I looked for a simple way to contact Apple and there is none. There is a series of prompts and links that are time consuming to be able to reach support about even a simple problem.

  • Cannot download Iphoto after updated to Yosemite

    I cannot update Iphoto anymore after updated to Yosemite. The system popped up a small window and showed that: update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled. But it is my own account, I just changed the password.
    Please help me to solve this problem.

    That means, that your AppleID is not associated with the iPhoto version you have installed.
    Which version of iPhoto do you currently have?  Sign into the App Store with your Apple ID (in the Store" menu).
    If iPhoto came preinstalled on your Mac, check the "Purchases" tab of the App Store, if there is an "Accept" button besides iPhoto. If yes, accept iPhoto to associate it with your Apple ID.  Then try again to update.
    If that does not work, uninstall iPhoto - move the iPhoto app from the Applications folder to the Trash and then go to the "Featured" tab of the App Store, search for iPhoto using the Search field, then press the "Get" button to install iPhoto again, this time with your current AppleID:

  • I cannot run iPhoto after update to Yosemite.  I cannot update iPhoto because the application store does not have any iPhoto update available.  Anyone can advice how to overcome this hassle?

    After update to Yosemite 10.10.3 the iPhoto program icon is banned and there is an error message that an update is required to run iPhoto, but the application store shows a message that iPhoto does not have any update available at this time.  There is not even any iPhoto program available on the application store.  Any suggestion on how to solve this annoyance?

    mende1 wrote:
    Unfortunately, Apple has removed both iPhoto and Aperture from the Mac App Store so they cannot be downloaded anymore. This means you are forced to migrate to Photos (included in OS X 10.10.3) or, if this app does not include features you need, look for a different app.
    Not true. Apple has removed both Apps from App Store so you cannot buy them anymore. But if you have any of these Apps already purchased in the past, then you can still download them on your Mac.
    Aristotle247 wrote:
    After update to Yosemite 10.10.3 the iPhoto program icon is banned and there is an error message that an update is required to run iPhoto, but the application store shows a message that iPhoto does not have any update available at this time.  There is not even any iPhoto program available on the application store.  Any suggestion on how to solve this annoyance?
    Open App Store, sign in with your Apple ID and go to Purchases tab. If you see iPhoto app listed there close down the App Store and do this steps as this is what worked for me:
    Open Finder and go to Applications folder.
    Locate iPhoto app
    Drag iPhoto app from your Applications folder to Trash (NOTE: Do not emptied Trash yet)
    Open App Store app and navigate to Purchases tab.
    Click on Install button which is next to the iPhoto app (on the right hand side).
    Once iPhoto is downloaded again, test it if its working for you. If all is ok, you can remove your Trash.

  • Problems with Wifi on iphone 4 after updating ot iOS 5.1

    After I update to iOS 5.1 is started having problems with my home wifi.
    After the update every thing seems to be running alright after after a day my connection was lost.
    When I tried to reconnect I got the message "unable to join the network".
    I tried the following things:
    - Forget network, reconnect: This did not help
    - restart iPhone: did not help.
    - Reset network settings: did not help.
    The next step I tried was to restart my router.
    This solved the problem, but after 1 day I have the same issue.
    When I go to work there is no problem when I get back home same thing over again.
    This is going on ever since I update to iOS 5.1
    Before the update I had no problems.
    Does anyone have more perment solution.

    I have the same issue with my iPhone4 running ios5.1. I have tried everything you mentioned above as well as updating the firmware on my router, setting my router to broadcast on 2.4GHZ or 5GHZ exclusively,  assigning my iPhone a static address as well as a multitude of other mentioned fixes. I have determined this is NOT an issue with my WiFi Network, or Router. All other wireless devices in my home do not have this issue; except for my partner's iPhone4S also running ios5.1. It's WiFi issues are identical to mine. Our other Smartphone, an  HTC running Android, has no WiFi issues whatever.
    When I attempt to use WiFi on other networks with my iPhone4, I encounter the same issues: Intermittent connectivity,reporting that it is "Unable to Join Network", showing a strong WiFi signal on screen and yet having no WiFi connectivity, showing WiFi connectivity on screen and strong signal strength, and having no IP Address(etc) under WiFi Networks Settings. After spending a great deal of time online looking for solutions I have determined the following:
    This is clearly an Apple Hardware or Software issue. I hope Apple eventually addresses this issue because it is extremely frustrating!

  • Files on 60GB iPod not found after updates to 1.2

    Before I restore just thought I would check. My iPod is conflicted as to what is loaded. Problems occur after update of iTunes 7.0 and iPod updater 1.2.
    Manually update is set. iTunes 7.0 says I have 6.0GB of Audio, 13.82GB of Video on a total capacity of 55.68GB iPod. However it also says I have 54.84GB of free space? All music and video files appear with the ! in iTunes, which means file not found.
    However, all titles of the files appear on the iPod as if they were still there but just not readable? From the iPod's settings, under About, it shows I still have 1250 Audio file, 98 videos but 54.84GB of space available. If I try to play files in a playlist, it just breezes through the album art and titles like it can't read the files.
    Reset, reboot and reinstall does nothing.
    iPod is unusable, should I wait for another update?
    Should I just restore and loose some stuff that was not backed up? (stupid on my part I know.)
    Or does anyone else know of a possible trick I could try?
    Dell   Windows XP  
    Dell   Windows XP  

    Applied Firmware Update 1.2.1 and it worked...
    Thank you Apple for finally fixing a major problem
    without ever acknowledging you had it...
    or even indicating what you update fixed when you distibuted
    it...
    I think apple needs some lessons how to provide support...
    without irritating its customer base...
    All you have to do is communicate...
    Respond with a message like "Known Problem" working on fix.
    would do wonders... And having an apple employee update
    the Discussions with an indication that you acknowledge
    your user community is having a serious problem and thank them for continueing to wait for a fix..

  • HT1430 What to do if the message shows "cannot activate iphone" after updating ios5?

    After updating to ios5, got the message "no sim card".   I turn off and restart, then reset language, country or region, connect to itune, "cannot activate iphone"  I dont know what's going on?

    There are several possibilites:
    Your security software (antivirus and firewall) is preventing iTunes from communicating with Apple's Activation server, gs.apple.com.
    You have a redirect in your hosts file for gs.apple.com. Open the hosts file and delete any lines that contain gs.apple.com. For the location of the hosts file, on a Mac it's /etc/hosts, on Windows it's c:\windows\system32\drivers\etc\hosts.
    Your phone was hacked or jailbroken to unlock it from the carrier it was locked to, and updating it the phone became locked to the original carrier. For this there is no solution that can be discussed in an Apple forum.

  • Cannot get mail after updating to 10.8.3

    After updating to OS X 10.8.3 I cannot get e-mail any more with Mail. I can send e-mail though. If I log in to the web interface I can see my new email waiting on the server. Is there any workaround to fix it?

    It is fixed from the time I signed in to the iCloud. (?) Can someone from Apple explain it?
    Thanks to sanjayfromtoronto for his help!

Maybe you are looking for

  • MSI Big Bang Marshal - Questions

    Hello all I am new here and I have been doing research on components for a new computer I am making a shopping list for. I have a few questions I have not been able to find any information online. Here goes 1. Anything specific I should know about th

  • Trying to back up iPad to external hard drive, "iTunes library file cannot be saved. The disk you are attempting to use is full."

    This issue is somewhat complex so I will try to explain it as clearly as I can. Any help will be greatly appreciated. It all began when I kept getting popups from my iPad saying that I had not backed up since May. I realized that was pretty dangerous

  • TS3623 "An error occurred while downloading this content, try again later."

    I have received this error message for over a week. I have tried resetting, restoring, unplugging, checked WiFi, connections, everything I've seen mentioned in other articles. Previews for ATV movies work, Netflix works, but newer purchases and renta

  • Using MIME with JAX-RPC

    Hi, I am trying to send simple MIME body part using RPC. Where can I find a working code sample ? My problem is that I don't know how to pass the SOAPContext to the server side. Or failing while trying to deliver an activation DataHandler as paramete

  • To configure Own Error page in Web Tier

    Hi, I am using jdev version 11.1.1.6. We have a error page for the application that we built which we can show to the User if the application pages comes up with an error. However if the Application itself is down.. We want to show the Users a error