Wifi card not appearing in XP

Ok i know its been talked about a lot before, but I cant seem to find the answer, I'm running XP sp2 and cant seem to get my airport card inside my MP to be recognised - is there a wee trick to this. Also cant get my isight to work either but that isnt so important

Hi da fiddler,
don't get me wrong, but are you sure your Mac Pro has an Airport card installed ?
Since the Airport card is an option to choose when buying, I am just asking.
As for the iSight, are you taling about the Firewire-connected iSight Apple sold some time ago ?
If so, have a look here http://en.wikipedia.org/wiki/ISight
The camera should be detected by WIndows XP and Vista but audio with it doesn't work due to lack of driver.
Regards
Stefan

Similar Messages

Wifi card not recognized after reboot.

I've got a Lenovo X140e and an Intel wifi card. (Intel Corporation Wireless-N 7260) that I installed myself, since the support for the Broadcom card it came with was spotty.
If I reboot my laptop, the card won't show up with either iwconfig or even lspci. If I do a cold reboot (power down entirely and start back up), it will show up just fine.
What gives?
Relevant lspci output:
01:00.0 Network controller: Intel Corporation Wireless 7260 (rev 4b)
Subsystem: Intel Corporation Wireless-N 7260
Flags: bus master, fast devsel, latency 0, IRQ 38
Memory at f1300000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi

When the card is recognized, rfkill lists it as unblocked; when it's not recognized, it doesn't show up at all.
I've got i3 installed; for connection management I've been sort of trying different things - netctl never works but wifi-menu has been pretty reliable. I haven't installed any special power management stuff at all - I'm not really sure how to find out what was auto-installed?

Sd card not appearing in file manager

hi i recently bought blackberry z3 model..i inserted sd card but its not appearing file manager..please help me what do i do
thank you,,

What format? And how did you format?
How about formatting the card using the BlackBerry?
- Ira

Buffalo wifi card not useable

I purchased a Buffalo WLI-CB-G54A card for use with my 15" Apple PowerBook G4, 1.67 GHz with built in Airport Extreme for better range and the ability to use an external antenna. The pcmcia card states it's supported natively with AirPort 3.1 drivers and up. It uses the Broadcom chipset.
The problem comes when I plug it in. If I plugged it in before startup it will kernal panic and crash at the gray startup screen. If I plug it in after the system is up the two green LEDs glow faintly but the AirPort menu lists the networks visible on the built in airport. I can't figure out how to "switch" off the built in and instead use this new one.
How is a third-party wifi card used on a powerbook w/ built in wifi already?

I have NEVER been able to use a PC Card wireless adapter successfully in my PowerBook G4 1.25GHz not to mention I get exactly the same behaviour as you, kernel panics and all.
What seems to be the problem is that Mac OS X sees the Broadcom based card as another Airport card. Coupled with the fact that it won't let you use two Airport card concurrently it will sit there and do nothing.
The only solution that I have found to this is to remove the internal Airport card. Fortunately or me I have access to the card but I believe this is not possible with the 1.67GHz model.
Alternatively you can try using a card that does NOT use the Broadcom chipset so that it is not recognised as an Airport card. Obviously you would then need drivers to make the card work.

Lenovo yoga 213 wifi card not working in the new laptop

I purchaed lenovo yoga 213 from Best Buy Boston and have brought to India.From the day one,the Bluetooth and Wifi is not working.On taking to their authorised service centr-Hitech technologies they have tried to replace the wifi card but even they are not able to solve the problem.I am trying to contact Lenovo for replacement of Laptop,but there is no response from them.What should I do?

Lenovo service centre has done all these after getting a replacement card
from Lenovo and again they have reported that the wifi replacement card
recieved is defective ,so they have asked for 2 nd time replacement of
wificard as well as the touchpad which they say carries the antenna for
wifi.The bottom line is i am tired of running around to service centre and
have not been able to use the laptop from the time i have bought the
laptop.I thought if there is a manufacturing defect lenovo,being a reputed
brand will replace the laptop.

Wifi card not connected after kernel update [solved]

Hi,
I've got a broadcom wifi card (BCM43225). Having deconnections with the brcmsmac driver, I changed for wl (from broadcom archive).
Today I updated the system and got the b43 driver. My wifi card would'nt see any network. On the networkmanager applet (gnome 3), tab "network parameters", it says "disconnected" and i can't find a way of reconnect my card.
I rebuilt the wl driver, it works as for the b43 (wifi card on) but still it's disconnected.
Extract of dmesg shows:
ADDRCONF(NETDEV_UP): wlan0: link is not ready
Any idea ?
Thanks
Last edited by grojo (2011-12-18 08:22:35)

It's weird: I had already installed b43 firmware from AUR but it didn't work (kernel 3.0). As I yaourted b43-firmware it said: "reinstall ?".
So I reinstalled and it f***ing works.
I'm not sure I got what happened...
Thank you though.

Tungsten E2: WiFi card "not supported"

I recently updated my Tungsten E2 with the most recent version of the WiFi software from the Palm Website. No problems with installation, but turning the WiFi on in my settings menu gives me an error message stating "The card in the SIDO slot is not a palmOne supported WiFi card." Pretty sure the card is a Palm card. Any ideas out there? I noticed a similar thread asking this question, but it was about 3 years ago, and no answers were received other than a suggestion to do a soft reset, which I did without success.
Thanks in advance for the help!!
Post relates to: Tungsten E2

I haven't read the instructions for installing the updated Wi-Fi card driver, but did you delete the old one first before installing the new one?
What I'd try next (only once you have a current backup via Hotsync) is a Hard Reset. BEFORE you Hotsync your stuff back to the E2, go through the diagnostic process of renaming the Backup folder on your desktop...this will allow your regular PIM data to return, but nothing else. Your Backup folder is located on this path:
(using Palm Desktop 4.x):
c > program files > palm (or palmone) > [your device folder, usually an abbreviation of your Palm's name, or perhaps a combination of your initials, etc.] > backup
(using Palm Desktop 6.2.2):
my documents > palm OS desktop > [your device folder] > backup
After you do this, go ahead and Hotsync. Then, reinstall ONLY the new Wi-Fi card driver. You should be able to just double-click on the .prc file from the renamed "backupold" folder. If it works, then reinstall your other apps one at a time. If it doesn't, then I dunno...maybe root around for the original driver and reinstall that? If you don't have the original disc, maybe you'll find it in the Backup or the Archive folder on your desktop.
Good luck, let us know how it goes.
Message Edited by smkranz on 01-08-2010 01:36 PM
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

Wifi card not working

Hi,
As of today my internal WiFi card in the iPad is not working anymore. The WiFi option in settings is grey and when looking into the "About" there is no WiFI MAC address (N/A). Is this a hardware problem or am I missing some sort of setting to enable the WiFi adapter?
Hope someone can help.
Bob

if you tried holding down the home and power button to reset the ipad
and you tried restoring the ipad
and non of those options work I would bring it in for service

Wifi card not detected with ifconfig (solved)

Hello,
I'm not sure wether I should post this here or not...
However, I'm using a Realtek Wifi card RTL8188CE on my laptop and I couldn't succeed in using it. (I'm using Arch x64, it's up-to-date).
I tried using ndiswrapper, but even when the ndiswrapper module is loaded and the driver properly created from the ".inf" file, ifconfig -a still doesn't display anything else than the usual "eth0" and "lo".
Here are the information I think are useful, please tell me if I forgot anything.
# lshw -C network
*-network NON-RÉCLAMÉ
description: Network controller
produit: RTL8188CE 802.11b/g/n WiFi Adapter
fabriquant: Realtek Semiconductor Co., Ltd.
identifiant matériel: 0
information bus: pci@0000:08:00.0
version: 01
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress bus_master cap_list
configuration: latency=0
ressources: portE/S:3000(taille=256) mémoire:f2d00000-f2d03fff
# lspci -vnn
08:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter [10ec:8176] (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. Device [10ec:9196]
Flags: bus master, fast devsel, latency 0, IRQ 7
I/O ports at 3000 [size=256]
Memory at f2d00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [160] Device Serial Number 01-91-81-fe-ff-4c-e0-00
# lsmod | grep ndiswrapper
ndiswrapper 231163 0
usbcore 139496 5 uvcvideo,ndiswrapper,xhci_hcd,ehci_hcd
# ndiswrapper -l
net8192ce : driver installed
device (10EC:8176) present
net8192cu : driver installed
Thanks in advance and please tell me if anything is missing !
Regards,
Alfred
Last edited by Alfred456654 (2011-04-03 16:15:06)

Hello,
I finally solved my problem. It turns out my driver existed on the AUR and all I had to do is load the corresponding module with modprobe.
Some useful links :
https://wiki.archlinux.org/index.php/Wi … _Supported
https://wiki.archlinux.org/index.php/Co … ice_module
Also here is the very same topic on the french forum where I was helped solving my problem (hopefully google is gonna be able to translate it) :
http://forums.archlinux.fr/topic7887.html

Wifi card not working properly

I purchased an hp Envy in October 2014. The wifi card no longer functions properly. Connections are intermittent or so slow they don't function. Is this defect covered by warranty? The wifi card is Qualcomm Atheros AR9485 802.11
As long as I'm hard wired, I have no internet connection issues. But dysfunctional wifi limits mobility and eliminates one of the primary features that I relied on in making the purchase choice. What is the solution?

Hi @2014Envybuyer,
Welcome to the HP Forums!
It is a superb place to find answers and suggestions!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I understand that you have an issue with your wireless.
Here is a link to HP PCs - Troubleshooting Wireless Network and Internet (Windows 8) that should assist you.
If the issue remains please contact HP support for further assistance or service.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Best of Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Some Photos from card not appearing on Import

When I Import photos into Aperture from my EOS 1d in many case it tends to just find about a third of the images that are on the card and the "Loading Assets" Indicator in Aperture just spins forever and the rest of the images from the card never appear until I cancel the task and import all over again.
It's quite dangerous as it would be easy to think you had imported all of your images and then delete them from the card in camera. Would formatting the card make a difference?

nufsed,
I have been asked by our engineers to pass along some questions. I've also sent a copy of these to your email address you registered here on the forums with.
1. Who hosts the IMAP account that received the email in question?
2. Who hosts the email account that sent the email in question?
3. What program was used to send the email? (May be easy to answer if email came from a friend or individual that the customer knows. Less difficult if it came via a company.)
4. Can we get a copy of the header from the email causing this issue? This may need to be done from the desktop PC
Thank you.

GS70 2PE Stealth Pro Wifi Card Not Showing

Hi,
these weekend i used my laptop connect with lan card, and when i do that i disable my wifi card on the windows network panel, as i always do on weekends. Problem is that yesterday went back to the network panel and wifi doesn´t show. tried to enable and disable wifi through the SCM panel but still nothing, wifi card doesn't even show up on device manager.
Things i did this weekend was update the Bios to the latest on msi site and installed the vmware station to trie out windows 10.
anyone have any idea?
Cheers.

Quote from: JakeSully on 04-February-15, 20:51:35
That isn't actually a reset hole it only cuts off the power from battery so if your etc gona do a change hard disk or something then you press in that button for it to cut off the electricity from the battery so motherboard has no power
I know what it does since samsung uses this type of thing as well on one or more models of theirs where battery is built in so you gota use pin and press this button that will cutt off the electricity to motherboard from battery.
Thanks for the input, Jakesully! The reason I brought this up was trying to give another thought as the problem was raised after BIOS update. And according to SOP provided by MSI, for some older models, they recommend removing both AC/DC power. Although I think it is just a long shot but it is no harm to give a try.

Procurement Card Not appearing in SC dropdown

Hi
Sysem : SRM 5.0 SP 09
I have done all the basic customizing in SPRO for procurement card IMG node.
The authorization object in M_BBP_PC for all (display and create list.)
Through SRM GUI transaction BBM1, i have created one card master.
Is there any web transaction to create User for the P card as mentioned in SRM 210 Appendix section of P card.
What is the web transaction to create P card from web.
I am not able to get the P card I have created in the BBM1.
Please let me know anyone can help me on this.
Thanks
Jayesh

Hi
Please check the links below as well ->
Re: Procurement cart authorisation
Note 620880 - BBM1: DYNPRO_MSG_IN_HELP if authorization missing
Re: Looking for help on P-Card
Related Help links ->
P-Card basics
http://help.sap.com/saphelp_srm50/helpdata/en/97/b71c4145a6f723e10000000a155106/frameset.htm
P-Card Process Flow
http://help.sap.com/saphelp_srm50/helpdata/en/61/2ff300787411d2b41d006094b92d37/frameset.htm
Re: PCARDS in extended classic scenario
Re: PCard Authorisation Step
Can any one let me know
PCard
Implementing PCARDS
Re: SRM 6.0: ECS and SUS
Re: Calssic or Extended Classic Scenario - BBP_EXTLOCALPO_BADI
Re: Reg the Basic Data
Re: Procurement Card as a Payment Method in Cart
Do let me know.
Regards
- Atul

Camera card not appearing in iPhoto sidebar

I know I can probably import the photos using the FIle>Import menu, but the card icon used to show up in the sidebar for iPhoto, and the photos would show up asking me to import all or select ones I wanted to import. Can't figure out how to get that to happen. This is iPhoto 11 on a Mac Mini running OS 10.7.5. Thanks.

Oops, never mind. It just appeared. I think Dropbox activity was slowing it down cuz when Dropbox finished, the icon appeared in the iPhoto sidebar.

Internal WiFi card not getting IP

Hi there,
I am having a problem with my Airport in the way of it not getting a valid IP address.
At first I though this was due to the router. No so as my Sisters MacBook (exactly the same model and version) works fine. Also it will not connect to any WiFi signal including WiFi Hotspots.
I though that maybe it was because I am in a foreign country (I am traveling around Asia at the moment). To check I bought a USB WiFi receiver designed for MAC and for Asia.
Still no joy.
I connect to an access point and it comes up with "Self Assigned IP address".
Please can anyone help me????
Thanks
Fraser

Sethx1 wrote:
I am having a problem with my Airport in the way of it not getting a valid IP address.
Welcome to Apple's discussion groups.
You might try resetting your connection settings using the steps listed in this message:
http://discussions.apple.com/thread.jspa?messageID=10695921&start=1
They're not guaranteed to solve the problem, but they'll only take you a minute or so to try. If that doesn't help, I don't have any other suggestions.

Wifi card not appearing in XP

Similar Messages

Maybe you are looking for