Wifi Card with the E2

Has anyone out there used/using the palm wifi sd card with the Tungsten E2?  How easy is it to work?  I was thinking of checking it out but was wondering if it is really worth it.  I have a wifi enabled system here and wanted to play around with the E2 and its wifi functions
thanks
jeridmar6
Post relates to: Tungsten E2

Hello jeridmar6, I've never used the card with an E2, but with my Zire72 it was fun!
It quickly went through the battery's charge, but I used to get a solid hour's worth of Wifi use before needing to recharge.
Just remember, it's a very old card by today's standards and the only security it can do is WEP encryption.  If you're running WPA or higher it will require you to back down a bit.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar Messages

  • I have an imac g4 purchased Dec 2003 runnung OS 10.5.8.  It runs fine with airport off, but when I turn airport on it freezes with the black page,  "restart by holding power key . . ."  I swapped the airport extreme card with the one in my ibook G4 (purch

    i have an imac g4 purchased Dec 2003 runnung OS 10.5.8.  It runs fine with airport off, but when I turn airport on it freezes with the black page,  "restart by holding power key . . ."  I swapped the airport extreme card with the one in my ibook G4 (purchased same date and running same OS).  No change in operation.
    I am running wifi from verizon.  Recently changed from mifi2200 to jetpak 4620 in a 3G location.  Ibook running fine, desktop freezes.  If I can boot desktop in safe mode and get airport turned off in time. then I can reboot regularly and imac runs flawlessly with no wireless.Have run disk utilities and TechTool Pro rebuild etc, but nothing has worked.  How do I fine the culprit?

    the power logix thing was really sad. apple changed so much after 10.4.8 that there wasn't a viable way to patch the software.
    That statement is precisely why I don't believe in blindly updating the OS, especially in a non-standard machine.
    We can't expect third parties to support us forever, and it is shameful to break something that works fine, except that we updated the OS....
    I think that any upgrade or modification to a machine or the OS greatly increases the risk of trouble or incompatibility with current configuration and "new" system files.
    After all, the component or software could only be tested as far as the current OS version when the component or software was released.
    Beyond that, we are all "beta testing".
    Following a beta tester protocol, and applying updates to a cloned system drive first, is a prudent way to approach updates, and not only for older, heavily modified machines.
    After 10.4.8 and moreso with Leopard, the focus is primarily on Intel architecture, not PPC architecture.
    Like it or not, we are all updating to the abyss of the extinction of our machines, unless we can be satisfied with the last stable version of OS that works well with our hardware and software.
    I wish they would include the latest pkgs at least with software update.
    Yes, having individual packages, rather than lump "OS X 10.x.x" updates would be nice.
    This way, one could update as one sees fit. That is to say, for example, fix the Quicktime, but leave my Network alone, etc., etc.
    In all fairness, Apple does provide for some breakdown of updates, but I believe there is much room for improvement, especially, as you point out, with regard to the core services portion of the OS.
    Until then, I'll leave Software Update disabled.......

  • Wifi card with rt2500 chipset not detected

    Hi all,
    I got a new pci wifi card with chipset rt2500, but I can't make it work. I installed without problems rt2500 driver from beta 3, and when I run ifconfig, the wifi card doesn't show up. If I run iwconfig, ra0 shows up but with no wireless extension. I tried to do iwconfig ra0 mode monitor or managed, and it says "Invalid argument". The card works with a live cd distro (rt2500 driver) and with windows so it's not an hardware problem, and when I do a lspci, card is appearing.
    I tried the rt2500-cvs driver, but I have the same problem too.
    So I think help is needed

    Zanton - maybe this is wrong place to ask this question but please can you tell me how did you compile your own kernel. I'm newbie with Arch and using pci wifi card with chipset rt2500 (not just now ).
    I've used Slacware over an year without problems and I think it's little bit tricky to compile Arch-linux kernel with ABS-way because it was so easy in Slack.
    So did you compile with ABS http://wiki.archlinux.org/index.php/Cus … n_with_ABS or some other way?
    I'm using latest rt2500-driver (nightly-cvs) and SMP as well PREEMPT is on!

  • New wifi card with Bluetooth

    Hi,
    i search for my Probook 6550b a Mini Pci Express wifi card with bluetooth.
    For the moment i have only a wifi card, with this spare part number 572509-001.
    My CPU is a Intel I5 M520.
    I found on the HP partsurfer site this card 593127-001. But the wifi is not the best on this card.
    Are there any other better cards that work?

    How Do I Find My Model Number or Product Number?
    That's needed before anyone can tell you want will work...
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • Is Apple aware of the Wifi issue with the IOS8 upgrade?

    Is Apple aware of the WiFi issue with the IOS8 update?  If so, what are the doing about it?

    Ipad, wifi stops working and I have to restart my iPad and log in again.  It only stays logged into my wifi for a short while then it drops it again.  I followed instructions from other threads to reset my IPad and my router...still having issues.  The same thing happened the last time I updated my IOS.

  • Every time I swap between my SIM cards with the iPhone all the messages that we're sent whenever the SIM card was not in my phone never show! is there anyway I can stop this and still get the massages?

    every time I swap between my SIM cards with the iPhone all the messages that we're sent whenever the SIM card was not in my phone never show! is there anyway I can stop this and still get the massages?

    Hello SeamusFitz,
    Thank you for using Apple Support Communities!
    In order to get your messages to show up on your other phone, you would need to have a backup of the phone with the messages, and then restore the new phone from that backup.
    According to article iTunes: About iOS backups found here http://support.apple.com/kb/HT4946 iTunes will backup your Messages.
    iTunes will back up the following information
    Messages (iMessage and carrier SMS or MMS pictures and videos).
    This will help you backup and restore your device:
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    All the very best,
    Sterling

  • Every time I swap between my SIM cards with the iPhone all the messages that we're sent whenever the SIM card was not in my phone never show! is there anyway I can stop this?

    every time I swap between my SIM cards with the iPhone all the messages that we're sent whenever the SIM card was not in my phone never show! is there anyway I can stop this and still get the massages?
    [email protected]
    cheers

    Hello SeamusFitz,
    Thank you for using Apple Support Communities!
    In order to get your messages to show up on your other phone, you would need to have a backup of the phone with the messages, and then restore the new phone from that backup.
    According to article iTunes: About iOS backups found here http://support.apple.com/kb/HT4946 iTunes will backup your Messages.
    iTunes will back up the following information
    Messages (iMessage and carrier SMS or MMS pictures and videos).
    This will help you backup and restore your device:
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    All the very best,
    Sterling

  • I can't turn my wifi on with the new iOS software

    I can't turn my wifi on with the new iOS software. I've tried resetting the network settings, resetting all settings, and a hard reset.

    Read here:
    http://support.apple.com/kb/ts1559
    If nothing works, make an appointment at any Apple store.

  • Can I use the iPone 3gs SIM Card with the iPad 2?

    Can I use the iPone 3gs SIM Card with the iPad 2

    The iPhone 3GS uses a full size SIM card.
    The iPad uses a micro-SIM card.

  • 2 SD cards with the same file numbers

    How do I burn 2 SD cards with the same file numbers. Always says do I want to replace photo with the same number.

    Welcome to the Apple Discussions. Rename one set of photos by renaming them in iPhoto with the Photos ➙ Batch Change ➙ Title to Text menu option and then export to the Desktop with the option to use the Title as the new file name.
    Or, put one each set of photos in their own folder and put the two folders on the memory card.
    Happy Holidays

  • Can i access ISA-Cards with the MH-DDK

    ok the basic problemis the following (i posted that already & thx to todd..)
    i want to access the 8253 timer on a (ISA) PC-DIO-96 card, which is not possible from NIDAQ.
    now i want to write my own device driver (i dont actually want, but i guess theres no other way)
    the MH-DDK is, afaik, based on VISA, which afaik is supposed to work with PCI/PXI cards.
    now - how do i access non-PCI (ISA) cards with the DDK?
    thx

    Greetings,
    It is not possible to use the Measurement Hardware DDK with your PC-DIO-96. You will need to use traditional register-level programming. The user manual for your board has a section that describes this process. I have included links to these manuals below (I was not sure if your PC-DIO-96 is PnP or not).
    PC-DIO-96/PnP User Manual
    PC-DIO-96 User Manual
    Good luck with your application.
    Spencer S.

  • MB466 sound card with the MB990 is not the same?

    MB466 sound card with the MB990 is not the same?
    MB466 Audio Equipment ID:0x10DECB79 Audio ID:63
    MB990 Audio Equipment ID:0x10DECB79 Audio ID:77

    You can enable ClearType system wide for all programs to make other programs like Firefox use it.
    * http://support.microsoft.com/kb/306527 - HOW TO: Use ClearType to Enhance Screen Fonts in Windows XP
    Control Panel > Display > Appearance > Effects: "Use the following method to smooth edges of screen fonts"

  • HT4623 I am trying to update my iPad 32 with retina display and whenever I do it tells me that I am not connected to the Internet even though I am. I have tried several different wifi spots with the same results. Any suggestions would be helpful. Thanks

    I am trying to update my iPad 32 with retina display and whenever I do it tells me that I am not connected to the Internet even though I am. I have tried several different wifi spots with the same results. Any suggestions would be helpful. Thanks

    Try a reset: hold down the home button along with the power button until you see the Apple, then let go.

  • IPhone 5 have my wifi works with the FRITZ! 7330 SL not as good when I do speed test I get to 0.41 Mbit / s With another Fritz Box Fon WLAN I get well over 12.31 Mbit / s on what to do.

    IPhone 5 have my wifi works with the FRITZ! 7330 SL not as good when I do speed test I get to 0.41 Mbit / s With another Fritz Box Fon WLAN I get well over 12.31 Mbit / s on what to do.

    IPhone 5 have my wifi works with the FRITZ! 7330 SL not as good when I do speed test I get to 0.41 Mbit / s With another Fritz Box Fon WLAN I get well over 12.31 Mbit / s on what to do.

  • My iPad doesn't recognise video files when I connect my sd card with the camera connection kit. It only recognises photos from the same card

    My iPad will only recognise photos when I connect an Sd card with the camera connection kit. It doesn't recognise video clips from the same card?!

    Most probably because your camera records videos into MTS files, which aren't cmpatible with iOS. Read http://www.iphonelife.com/blog/87/playing-back-1080p60i60p-non-mov-videos-right- your-camera for more info and the alternatives (preprocessing ("remuxing") on a desktop etc); don't forget to follow the iVI review link at the bottom if you have a Mac.

Maybe you are looking for

  • Display date prompt in crystal report output

    Hi There, In my report output the values entered in date prompt(range) is not displayed. I've prompt  that is created on document created on field. The properties of prompt are Posting date...... date.........static values value field : ERDAT..... va

  • ITunes will not allow me to transfer music manually to my iPhone

    Hello, Since I got my iPhone 4S in March, I have been manually adding music to my phone by connecting the phone, and dragging music to my phone. Recently, I had to reformat my PC and when I reinstalled iTunes, I try to click and drag music but it giv

  • Video and audio choking

    Ever since I upgraded to Moutian Lion I'm having an issue where my video and audio streams are choking while doing anything. For example, I'll be streaming spotify and working on a photoshop file (below 20mb file size), and the audio will start cutti

  • Using container from another global class

    There are two global classes being used by me in a program - Class A and Class B.   Class A contains the container to display ALV.   Class B contains the logic to display ALV.   class B is used as attribute class in Class A.   How is that I can use t

  • How can I deploy a jar with directory entries using deploy profiles?

    Hi, I'm trying to deploy a jar file using deloy profiles, but the jar file deployed contains no directory entry. Why? Is it possible to do that using deploy profiles?