Wifi connected but cannot get access to internet

Dear all
I have my macbook pro with ma os x mountain lion10.8.2
bu I have a problem with connection
when you activate the wifi it show WIFI CONNECTED
But umpossible to get acces to internet, why?
Someone can hel me

Shutdown the computer.
Power off the router. Wait a while.
Power on the router. Wait until all the lights are lit properly.
Start up the computer. Try to connect to Internet.
Best.

Similar Messages

  • Wifi connect, still cannot get on the internet

    I have read all the infromation that has been poseted. I went into settings 1. general, 2. reset, 3. reset network setting, 4. retyped my password. It says that it is connect but when I go to safari it states it is not connected to internet. I hope I can get some help....

    I went through something similar after that last software update and subsequent fix, I had some success with the network reset but still had problems. I finally went and did the complete restore. Wala! almost everything worked much better except for the very quick battery drain. I fixed that by making sure and turning off the wi-fi after every session and making sure any songs I was listening too in I-Tunes were stopped. Amazing difference! My battery lasts about a week now with daily use. Apparently the Touch will keep playing songs until the playlist is finished unless you manually stop it (I have big ones with dozens of songs), and I may be wrong but I think the wi-fi is always searching for a signal even when it's off. The restore was pretty easy. Hope this helps.

  • Visual internet connection, but cannot get on the internet? Help:(

    Hi people.
    My wife bought me an Ipod touch. This is a long time ago, because I cannot use it with my wi-fi connection home. I took it with me to my parents, and it worked without any problems there. I took it with me to my place, and I got the same problems.
    It says that I got connection and I have the Wi-fi connection icon, but I'm not connected to the net.
    I've tried to connect many times. I've deleted and restarted the thing. I've looked at the IP adress, and it started with 169. I've tried to look at this discussion board, but haven't found any help.
    I'm getting quite desperate, and I would like to get some help. Since I am quite a beginner, I would like a simple answer:) But any help will do great.
    Thank you

    I've looked at the IP adress, and it started with 169.
    This means you aren't actually connected to the Internet; only to your router.
    An easy first attempt at a fix is to turn your router off and then on again.

  • Have a MacBook. Shows I have an internet connection, but cannot get on. I do have connection with my other computer???

    Have a MacBook. Shows I have an internet connection, but cannot get on. I do have connection with my other computer???

    I've looked at the IP adress, and it started with 169.
    This means you aren't actually connected to the Internet; only to your router.
    An easy first attempt at a fix is to turn your router off and then on again.

  • I have a good connection thru both wifi and ethernet but cannot get to the internet

    I have a good connection thru both wifi and ethernet but cannot get to the internet

    Which model iMac do you have? Which OS system is currently installed on your comp? 

  • Have WIFI connection but can't access Safari or App store, nothing.  Can anyone help??

    I have just bought a iPad 2 WI-FI 16G today.  I have a full WI-FI connection but can't access the App store or Safari for any webpages, can anyone help?
    Thanks!!!!

    Despite what you call, "a full WiFi connection", you may not really be connected to your WiFi network.
    Your router may not have given your iPad a valid local network IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
    Sometimes the fix can be as simple as restarting your router (remove power to the router for 30 seconds and then  restart). Next, reset network settings on your iPad (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
    If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

  • Itunes says I don't have an internet connection but I can access the internet.  I turned my firewall off.  How do I get onto itunes store

    I can't access my itunes store, it says I don't have an internet connection but I do.  I tried updating to the newest version of itunes, turned off my firewall, checked to make sure itunes was allowed in my internet options.  what else can i do?

    Hello bigblue8
    Check out the following articles for troubleshooting access to the iTunes Store. The first one will probably get you started enough to get it taken care of. If it does not the follow up article should definitely solve it for you.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/ts3297
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Connected to router but cannot get on the internet

    Hi,
    I have connected my sons laptop to home hub 3 and it is showing connected to router but when we try to connect toonternet we get error message,have tried connecting to lots of different web pages without any joy.
    Laptop will connectto other wireless when we are not at home. Really not sure where we are going wrong.
    Can anyone help?
    Thanks

    Couple of things to check:
    1) Are you using the wireless passkey that is on the Homehub label to log on with?
    2) It could be that your computer has IPv6 selected. Try disconnecting it as follows:
    Select Start
    In the search field type.ncpa.cpl and press enter.
    In the new window right click on your wireless network connection and select properties
    In “This connection uses the following items” section remove the tick beside Internet Protocol Version 6 (TCP/IPv6) then press OK
    Left click on Internet Protocol IPv4, click properties . Check the options to obtain IP addres and DNS server address automatically.
    Once done try and connect to internet.

  • Wifi Connected but unable to access internet 9300

    Hello 
    I recently changed my data plan on my device but after I did so I realized my wifi connection wouldn't work. My wifi connection is fully connected (and my data is turned off) but it won't work at all. 
    Please Help
    Solved!
    Go to Solution.

    AmandaTemple wrote:
    Hello 
    My wifi connection is fully connected (and my data is turned off)
    Hi AmandaTemple
    Welcome to BlackBerry Support Forums
    On Manage Connection you can turn off your Mobile Network , But have to TURN ON  your Data Services .Can you try that and see if it allows .
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • Tried everything - says its connected, but can't access the internet

    I have set up my wireless correctly. I went in and changed the name of SSID, and put a WEP password on it. I have the Default IP as 192.168.1.1 and starting IP at 192.168.1.100
    I pinged 192.168.1.1 and it was fine. I then pinged the 4.2.2.2 and it timed out. So I downloaded the firmware and upgraded it successfully. Tried the ping again and got the same result. Also, when I connect the modem to the router, then the router to my computer the internet doesn't work. I have to bypass the router and just use the modem. 
    I have reset the router multiple times - it is hard to set up because in my building there seems to be someone else nearby who has a linksys router with the same default IP and they don't have a password or anything so it's hard to decide which one to connect to to set up. 
    either way, nothing has worked. Any ideas?!?!

    Whats the model number of your Router. When you Hardwired you Computer to the Router you still dont have a access to internet. This means your router is not configured properly.
    If your Internet Service Providor is Cable follow this link
    If your Internet Service Providor is DSL follow this link
    Here are the wireless settings which you can set on your router, Assuming you have a G series router, Follow this steps.
    Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave username blank & in password use admin in lower case...
    For Wireless Settings, please do the following : -
    Click on the Wireless tab
    - Wireless Network mode should be mixed...
    - Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
    - Set the Wireless channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
    Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
    For Wireless Security : -
    Click on the Sub tab under Wireless > Wireless Security...
    Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
    Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
    Click on Advanced Wireless Settings
    Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
    Now see if you can locate your Wireless Network and attempt to connect... 

  • I have a wifi connection but cannot connect to the internet

    I am in France on vacation. My iPhone connects just fine but not my iPad. Wireless shows full strength on both but no Internet on iPad only. Already reset network connections and tried to forget network and try again. No luck.

    Follow these Wi-Fi troubleshooting steps:
    http://www.apple.com/support/ipad/wifi/

  • Strong wifi connection but cannot connect to Internet after upgrade to ios5

    After upgrade to ios 5, my iPad 2 connect to the wireless router just fine. However, it take forever to connect to a website. Following suggestion from someone, I switch my router off then on, it work. But after a day, the problem came back. Switch off and on the router solve the problem again..
    This connection problem appear periodically since, it is very annoying.
    Anyone know the reason for this connection problem and any solution?. thanks a lot.
    My iPad 2 work just fine under 4.3.5!

    Forgot to say, my iPhone 4 work just fine after upgrade to iOS 5.

  • TS1398 I have a good wifi connection but keep getting "cannot connect to store" message when trying to download movies or apps today. Always been fine in the past.

    As above (first time I've tried to use apple support. God it's a bloody palaver)

    There seems to be an issue with the iTunes store. There are quite a few posts with similar complaints, but I have not seen a statement from Apple.

  • HT1695 Hi. I recently purchased the Ipad with Wifi + 3G but cannot get the Wifi to work. Do I need a password for that?

    Hi all. I recently purchased the Wifi + 3G Ipad version and am trying to connect the Wifi but I'm not sure if I need a password for that or not.
    I am a bit of a beginner so anything technical goes over my head so would really appreciate any help.
    Thanks :)

    it depend on your wifi network
    I hope you do use a password otherwise you have an unsecure wifi network which could be abused by other people

  • TS1398 Connected to Wi Fi but cannot get Internet access

    Connected to Wi Fi but cannot get Internet access Have just done OTA update Dec 1 1012, could this be the problem?

    Does the iPod connect to other networks?
    Do other devices now connect?
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

Maybe you are looking for

  • Reverse F-37 entry

    Dear Sir What is the T-Code to reverse F-37 entry (Customer down payment request) Thanks Sanjay

  • Users for logging on to receiver systems

    Hi, The user name and the password that the IS needs for logging on to a receiver system to deliver a message are kept in the database of the Integration Directory and cached in the IS. According to the documentation, the passwords are stored in the

  • Need Bapi or IDOC to insert data into FB60 T-Code

    Hi Experts, I need Bapi or standard IDOC to insert data in to FB60 T-Code. Thanks in advace Krishna

  • Oracle stream - Table instantiation

    Hi, I have included DDL rules in capture process. Everthing goes fine except when I am creating new table in source. It gives below error. ORA-26687: no instantiation SCN provided for "PCAT_NT"."" in source database "PCAT" My DDL rules are as below :

  • Planning Forms and Folders

    Can a planning form be in more than one folder? Or does planning have you make copies and save them into separate folders. So when a change is required it will need to be done to all copies of the form?