Wifi connected but won't load

My ipod touch is connected to my mac via airport:
- my mac is loading pages ok, and displays the arrow up airport icon (sharing)
- no WEP,
- i can see my assigned DHCP and subnet numbers in ipod wifi settings
- i get the blue signal icon in top left hand corner
It would be reasonable to assume at this point my ipod is connected,
BUT every app on the ipod says "Cannot Open xxx, because it is not connected..."
Haven't found an answer to this anywhere, it was working up unitl recently, tried resetting network on the ipod.
Can someone from Apple please respond???

Welcome to Apple Discussions
This is a discussion board of fellow users and not Apple employees. If you feel you need Apple Support then you can either call them or visit an Apple store and speak with a Genius.
Let's review what you have going on.
1. You are running an Airport Base. - You are broadcasting in b/g/n modes, correct?
2. You have no encryption set up. - You should really set up WPA to protect yourself.
3. When your touch is connected to the network and you tap the little blue > next to your network name you see what? Is your IP address 192.168.x.x; subnet mask 255.255.255.0; Router IP address 192.168.x.x; DNS is the same as your router address?
4. If all of the above are good, then try typing this address into the touch version of Safari: http://74.125.45.100. You should land on the homepage of Google. If not, you need to figure out what is going on with your ISP's DNS service. You may want to set your router to use the DNS addresses of OpenDNS (www.opendns.com).
Good luck and respond with what you find.

Similar Messages

  • Have Wifi connection but won't load

    My Iphone 3g  indicates wifi connection after finding and connecting to my office router but won't load Itunes, App store or Safari pages, it will however connect via 3G. The phone is using Orange as the carrier and the phone was previously on the o2 network but was unlocked by o2 prior to putting in an Orange sim.
    I have an identical Iphone (for business use) which connects fine, this is running on an O2 network but is otherwise identical.
    Any suggestions are really appreciated.
    Many thanks.

    If you are running Lion 10.7.2 please try Lion WiFi  problems fix, if you have trouble understanding it then watch the WiFi Lion Fix on YouTube . Your issue also could be with your router, it may be using a older firmware version. You will need to refer to the router mfg for instruction on how to update the router.

  • MacBook Pro wifi connected but won't load Internet

    I've connected my MacBook Pro to my local wifi connection and it tells me that it is connected, but I can't run anything on it that needs an Internet connection (eg. Google Chrome, Skype etc.)
    I've ran the 'Assist Me' checks in the Network Preferences and results have found the wifi connection to be positive..
    I am so confused by this!! Somebody please help?!

    First contact your ISP.  You need to confirm that the issue is not on their end.
    Change your router channel.  Sometimes this is all you will have to do.
    Power cycling the router.  Read the router's user manual or contact their tech support for instructions.
    System Preferences/Internet & Network/Network
    Unlock the padlock
    Locations:  Automatic
    Highlight Airport
    Click the Assist Me button
    In the popup window click the Diagnostic button.
    System Preferences/Network- Unlock padlock.  Highlight Airport.  Network Name-select your name.  Click on the Advanced button.  Airport/Preferred Networks-delete all that is not your network.
    Place a check mark next to "Remember networks this computer has joined."  Click the OK button and lock the padlock.  Restart your computer.
    http://support.apple.com/kb/TS1920 Mac OS: How to release and renew a DHCP lease
    No internet connection (wireless)
    Check to see if an extra entry is present in the DNS Tab for your wireless connection (System Preferences/Network/Airport/Advanced/DNS).
    Delete all extra entries that you find.
    Place a check mark next to "Remember networks this computer has joined."
    Other resources to check into:
    Configuring 802.1X in Mac OS X Lion and Later
    Non-responsive DNS server or invalid DNS configuration can cause long delay before webpages load
    Netspot
    How to diagnose and resolve Wi-Fi slow-downs
    Pv6 troubleshooting
    OS X Mountain Lion: Check the status of your network connections
    OS X Mountain Lion: Requirements for wireless Internet access
    What Affects Wireless Internet?
    Solutions for connecting to the Internet, setting up a small network, and troubleshooting
    If using one of Apple's Airport routers, read its user manual or post in its forum area. If using a 3rd party router, read its user manual, contact their tech support department/website or post in its forum area.  Another possible solution - read mammothsuziq response https://discussions.apple.com/message/22082360#22082360

  • After 2.0 update, WiFi still connects, but won't load pages or any internet

    So I had just used the IPod touch to hit some web pages, look at weather, stocks, youtube etc... an hour later....
    installed the 2.0 update with the New York Times app, now I still connect to my access point, renewing IPs still work, It IS connected to the AP, but Internet based apps time out.
    Example error: Safari could not open the page because the server stopped responding.
    I have rebooted, restarted, restored, and all the other things I've seen mentioned, but still can't get internet traffic. At one point I even tried connecting to the AP management, was prompted for ID and password, but then blank page.
    any help appreciated

    Exactly the same here. Just noticed this in my local coffee shop (Neros) where I used to be able to log on to BT Openzone. Now, since updating to 2.0 version, I get the same error message as you i.e. I can find and attach to the WiFi host but cannot get any further than "Safari can't open the page because it is not connected to the internet" Tried re-booting to no avail. My WiFi works just fine at home, though. Really annoying. Any ideas ?

  • Macbook pro has wifi connected but won't open internet - says computer offline - works fine on ethernet and other pc's

    Any ideas on how to resolve this issue - wifi is connected but the web browser won't open - gives message that computer is offline. It works fine on ethernet and also on other computers in house. no other modem or devices in home.
    computer one year old.

    He advised me to 'back up' everything and 'reformat' the computer.
    I have been looking at how to do these tasks - not 100% on both.
    The quickest way to do this is to create a clone copy of your existing internal Macintosh HD. You can create this copy using applications like Data Backup, Carbon Copy Cloner, or SuperDuper!.
    I use an external USB HDD for the clone copies.
    The following AppleInsider article will give you an idea on how to use Carbon Copy Cloner to make a clone backup of your Mac's hard drive.

  • Web UI connects but won't load

    All, Suddenly, I am able to conenct to my WD MyCloud via the Desktop app, but when attempting to connect to the Web UI it won't load.  Details:Connect to IP of drive via Chrome/Safari/Android Chrome/IE (tested with 4 browsers on two devices)It redirects to HTTP://"IP"/UIPage animates to say "Accessing WD MyCloud" and then "Attempting to Authenticate"The page then goes gray (other than the black bar on top with WD MyCloud logo).  Nothing else - leave it for hours, it never loads.Any thoughts?  Any support is greatly appreciated. Thank you,Jason 

    Additional notes:Tried power cycling (left off for an hour), no luck.Tried holding reset button for 4 seconds (heard it reboot), no luck.Light on front is steady Blue.Shares are accessible from Desktop app.I would try using the desktop app to apply a new firmware, but it tells me an admin must login to apply firmware...but I don't see a way to change the login ID used within the Desktop app.Not accessible from SSH/FTP/SMB.

  • Have wifi connection but won't let me connect to itunes or do anything else

    Have a wi fi connection but can not do anything and when I try app store it says cannot connect to itunes store

    Can't connect to the iTunes Store

  • Orange USB Modem with "Mobile Partner" connects but won't load pages

    All,
    I talked Orange Telecom into giving me a free trial with one of their USB modems. I plugged the modem into my MB Pro, installed the "Mobile Partner" software and configured the connection settings as specified by the Tech. I am able to connect fine using the device, however, it will not allow me to receive data, so I am unable to load web pages. The connection says that I am sending data, but not receiving anything. Any ideas on what I need to do in order to successfully receive data?
    Current Settings are as follows:
    Connection: Orange
    APN: orange.ug
    Phone Number: *99#
    user: orange
    password: orange
    with these settings I am able to connect fine, but no data is received. I am guessing this has something to do with a setting in Network Preferences, but I can't figure out why it's not working. Any help would be appreciated.
    Thanks,
    Joe

    Hi Sig - thanks for the reply. Unfortunately, I was sitting with the Tech rep when we configured the settings, so we are both sure the phone number was right. Additionally, I am connecting and I can see that information is being "sent," however the problem is that no information is being "received" so I am unable to load web pages, etc.
    It must be some sort of problem with the network settings in Mac OS because there does not appear to be any problem connecting to the service, the problem has been receiving information. Any other suggestions or help would be appreciated.
    Thanks,
    JB

  • Internet connected but won't load, have to turn wi-fi on and off every 3 or so minutes

    I have a 2011 Macbook Pro. My wi-fi is great, but I have a problem with connecting using my computer. I can connect to the wi-fi network in a second, and the internet will work fine for let's say 3-5 minutes. Then everything just stops loading. I have to turn off wi-fi, turn it back on, and re-connect to the network just for pages to load again.
    This does not happen with my phone.
    What can I do to fix this?

    Hi jordanapple,
    Thank you for using Apple Support Communities.
    To troubleshoot this issue where your Wi-Fi connection on your Mac seems to be dropping, please follow the steps in the article linked to below.
    Wi-Fi: How to troubleshoot Wi-Fi connectivity - Apple Support
    Cheers,
    Alex H.

  • I can make a WiFi connection but pages will not load. WiFi works for a laptop using windows

    I can make a WiFi connection but pages will not load.  WiFi works ok on a laptop using Windows.  I have reset the WiFi settings but this makes no difference.

    Thanks, Linc, but  that almost helped:
    Because the retina 15 only has a wifi connection (no ethernet), that's the connection I'm stuck with for the notebook. But on the 27iMac, I did have both ethernet and wifi enabled. When I turned the wifi off on the 27, therer was a brief moment when both computers were showing their counterparts when I tried to make a network connection. BUT, after a few seconds of 'searching', the computer I was trying to connect to disappeared from the Network list.
    So I tried the opposite; the retina can only connect thru wifi, so that's a given. I swithched my ethernet off and then enabed the wifi on the 27 and ....same thing: When I try a network connection, there are a few seconds of 'searching', then the ony option I'm left with is share screen, which doesn't work either.
    I've read the 'dropped' network is a problem with the retina, but the odd thing is that I never lose my internet connection—that continues to work fine, as does Air Drop—but I can't seem to connect, network-wise.
    Any ideas about the dropped network?

  • TS1398 I have a wifi connection but it won't allow me to join. what should i do?

    I have a wifi connection but it won't allow me to join. it happens when i upgraded my iphone to 5.1.1. What should i do now? can anyone help me please. thanks

    Turn your router completely off (unplug it) for a few seconds, then turn it back on again and see if you can connect.

  • I downloaded iBooks on my Ipad 2 and have a WiFi connection, but why is iBookstore taking forever to load?

    I downloaded iBooks on my Ipad 2 and have a WiFi connection, but why is iBooks taking forever to load?

    Contact iTunes Store Customer Service.
    tt2

  • "Unable to connect to server"  I have wifi connection but I'm getting this error when I try to purchase an app. Why?

    "Unable to connect to server"  I have wifi connection but I'm getting this error when I try to purchase an app. Why? If anyone knows can you please help me thank you in advance. :-(

    Can you load a webpage in Safari with that wifi connection? If so then it's a problem with the iTunes Store app connection. If not then your wifi isn't fully functional and you need to troubleshoot that first.

  • UnixODBC connects, but won't select - 64bit Linux and client 10.2.0.1.0

    ODBC connects, but won't select - 64bit Linux and 64 bit Oracle instant client 10.2.0.1.0, full install (all files but basiclite).
    ODBC can connect to an Oracle database, but cannot describe or select.
    sqlplus can connect and select.
    Also, ODBC can connect and select using a mysql database.
    At end is ODBC trace log, odbcinst.ini and odbc.ini
    Using the isql utility from unixODBC version 2.2.10, I get the following
    ## working tnsnames.ora is located
    $ export TNS_ADMIN=/usr/share/oracle/OraHome_1/network/admin
    $ LD_LIBRARY_PATH=/usr/lib64/oracle isql -v TESTDB foo bar
    | Connected! |
    | |
    | sql-statement |
    | help [tablename] |
    | quit |
    | |
    SQL> describe dual
    [IM003][unixODBC][Driver Manager]Specified driver could not be loaded
    [ISQL]ERROR: Could not SQLAllocStmt
    SQL> select count(*) from dual;
    [IM003][unixODBC][Driver Manager]Specified driver could not be loaded
    [ISQL]ERROR: Could not SQLAllocStmt
    SQL>
    Trace appended at end.
    System Details
    SuSE 9.3 64 bit, 2x Xeon, 8Gb RAM, latest SuSE kernel 2.6.11.4-21.9-smp
    A 64bit full client(10.1.0.3.0) is installed in /usr/share/oracle/OraHome_1, where the tnsnames.ora file is located (in network/admin)
    The 64 bit instant client is installed in /usr/lib64/instantclient_10_2, pointed to by soft-link /usr/lib64/oracle
    I also have a 32bit instant client, which is needed by OpenOffice
    From a shell with unset ORACLE_HOME, and with no Oracle lib in the ld.config path, all 3 versions are able to connect, and describe dual and select (*) from dual;
    export TNS_ADMIN=/usr/share/oracle/OraHome_1/network/admin
    # 10.2 64 bit instant client
    LD_LIBRARY_PATH=/usr/lib64/oracle /usr/lib64/oracle/sqlplus foo/bar@TESTDB
    # 10.2 32 bit instant client
    LD_LIBRARY_PATH=/usr/lib/oracle /usr/lib/oracle/sqlplus foo/bar@TESTDB
    # 10.1 64 bit full client
    LD_LIBRARY_PATH=/usr/share/oracle/OraHome_1/lib /usr/share/oracle/OraHome_1/bin/sqlplus foo/bar@TESTDB
    #### LOG AND INI FILES
    ### odbcinst.ini
    [OracleODBC-10g]
    Description = Oracle ODBC driver for Oracle 10g
    Driver = /usr/lib64/oracle/libsqora.so.10.1
    Setup = /usr/lib64/unixODBC/liboraodbcS.so.1
    FileUsage =
    CPTimeout =
    CPReuse =
    [ODBC]
    Trace = Yes
    TraceFile = /tmp/sql.log
    ForceTrace = No
    Pooling = No
    ### odbc.ini
    [TESTDB]
    Application Attributes = T
    Attributes = W
    BatchAutocommitMode = IfAllSuccessful
    CloseCursor = F
    DisableDPM = F
    DisableMTS = T
    Driver = OracleODBC-10g
    DSN = TESTDB
    EXECSchemaOpt =
    EXECSyntax = T
    Failover = T
    FailoverDelay = 10
    FailoverRetryCount = 10
    FetchBufferSize = 64000
    ForceWCHAR = F
    Lobs = T
    Longs = T
    MetadataIdDefault = F
    QueryTimeout = T
    ResultSets = T
    ServerName = TESTDB
    SQLGetData extensions = F
    Translation DLL =
    Translation Option = 0
    Here is the output from ODBC's trace of the isql session
    [ODBC][27847][__handles.c][444]
              Exit:[SQL_SUCCESS]
                   Environment = 0x507700
    [ODBC][27847][SQLAllocHandle.c][346]
              Entry:
                   Handle Type = 2
                   Input Handle = 0x507700
    [ODBC][27847][SQLAllocHandle.c][464]
              Exit:[SQL_SUCCESS]
                   Output Handle = 0x507ce0
    [ODBC][27847][SQLConnect.c][3527]
              Entry:
                   Connection = 0x507ce0
                   Server Name = [TESTDB][length = 6 (SQL_NTS)]
                   User Name = [foo][length = 3 (SQL_NTS)]
                   Authentication = [bar][length = 3 (SQL_NTS)]
              UNICODE Using encoding ASCII 'ISO8859-1' and UNICODE 'UCS-2LE'
    [ODBC][27847][SQLConnect.c][4101]
              Exit:[SQL_SUCCESS]
    [ODBC][27847][SQLAllocHandle.c][511]
              Entry:
                   Handle Type = 3
                   Input Handle = 0x507ce0
    [ODBC][27847][SQLAllocHandle.c][641]Error: IM003
    [ODBC][27847][SQLError.c][424]
              Entry:
                   Connection = 0x507ce0
                   SQLState = 0x7fffffffd750
                   Native = 0x7fffffffd748
                   Message Text = 0x7fffffffd760
                   Buffer Length = 500
                   Text Len Ptr = 0x7fffffffd74e
    [ODBC][27847][SQLError.c][461]
              Exit:[SQL_SUCCESS]
                   SQLState = IM003
                   Native = 0x7fffffffd748 -> 0
                   Message Text = [[unixODBC][Driver Manager]Specified driver could not be loaded]
    [ODBC][27847][SQLError.c][424]
              Entry:
                   Connection = 0x507ce0
                   SQLState = 0x7fffffffd750
                   Native = 0x7fffffffd748
                   Message Text = 0x7fffffffd760
                   Buffer Length = 500
                   Text Len Ptr = 0x7fffffffd74e
    [ODBC][27847][SQLError.c][461]
              Exit:[SQL_NO_DATA]
    [ODBC][27847][SQLError.c][504]
              Entry:
                   Environment = 0x507700
                   SQLState = 0x7fffffffd750
                   Native = 0x7fffffffd748
                   Message Text = 0x7fffffffd760
                   Buffer Length = 500
                   Text Len Ptr = 0x7fffffffd74e
    [ODBC][27847][SQLError.c][541]
              Exit:[SQL_NO_DATA]
    [ODBC][27847][SQLAllocHandle.c][511]
              Entry:
                   Handle Type = 3
                   Input Handle = 0x507ce0
    [ODBC][27847][SQLAllocHandle.c][641]Error: IM003
    [ODBC][27847][SQLError.c][424]
              Entry:
                   Connection = 0x507ce0
                   SQLState = 0x7fffffffd750
                   Native = 0x7fffffffd748
                   Message Text = 0x7fffffffd760
                   Buffer Length = 500
                   Text Len Ptr = 0x7fffffffd74e
    [ODBC][27847][SQLError.c][461]
              Exit:[SQL_SUCCESS]
                   SQLState = IM003
                   Native = 0x7fffffffd748 -> 0
                   Message Text = [[unixODBC][Driver Manager]Specified driver could not be loaded]
    [ODBC][27847][SQLError.c][424]
              Entry:
                   Connection = 0x507ce0
                   SQLState = 0x7fffffffd750
                   Native = 0x7fffffffd748
                   Message Text = 0x7fffffffd760
                   Buffer Length = 500
                   Text Len Ptr = 0x7fffffffd74e
    [ODBC][27847][SQLError.c][461]
              Exit:[SQL_NO_DATA]
    [ODBC][27847][SQLError.c][504]
              Entry:
                   Environment = 0x507700
                   SQLState = 0x7fffffffd750
                   Native = 0x7fffffffd748
                   Message Text = 0x7fffffffd760
                   Buffer Length = 500
                   Text Len Ptr = 0x7fffffffd74e
    [ODBC][27847][SQLError.c][541]
              Exit:[SQL_NO_DATA]

    We are having similar issue. Could you please let me know how to resolve this issue. If using 32-bit driver is the only solution, please provide the URL to download this.
    Linux gahfndev02 2.6.9-42.0.3.ELsmp #1 SMP Mon Sep 25 17:24:31 EDT 2006 x86_64 x86_64 x86_64 GNU/Linux
    SQL*Plus: Release 10.2.0.1.0 - Production on Mon Jan 22 16:56:41 2007

  • On 3G we cannot send emails from either our iPhones or iPad and this also happens with some WiFi connections but not all.  Yet we can always send emails from our Hotmail Email account.  What is causing this and what do we need to do to resolve it?

    On 3G we cannot send  Business emails from either our iPhones or Ipad and this also happens with some WiFi connections but not all.  Yet we can always send emails from our Hotmail Account using both 3G and WiFi.
    We bought the iPhones and Ipad so that we could send emails while we are out of the Office, but we are not able to do this unless we can find a WiFi connection. Incoming emails are fine.  We use IMAP, for Business emails just incase this is relevant and I know that Hotmail is POP3.
    Our technical IT knowledge is not great, so we look forward to your suggestions as to how to resolve this. 

    Contact whomever supports the email account and get the correct Outgoing email server settings from them.

Maybe you are looking for

  • How to check if my function is MT-safe?

    I wrote some functions in a multi-thread program. I can check if a function is MT-safe by man it. But I'm not sure, if a function calls only MT-safe functions means this function is MT-safe too? Any help is appreciated. Jenny

  • What's time Chinese users can use 8330 to send Chinese SMS?

    Is there any plans to support Chinese text messages on 8330? what's time Chinese users can use 8330 to send Chinese SMS? Look forward to attach importance to Chinese users, thank you! Best Regards!

  • C7 connection problem with windows 7 (64 bit)

    Hi! I have windows 7 installed on DELL INSPIRON N5110 model....I have Nokia C7 mobile phone...I want to connect C7 with Laptop via bluetooth using Nokia OVI suite...but I got error as "Peripheral Device software not installed"....OVI suite got an err

  • Time and date when the video was taken ???

    i burned my project allready but while watching it on tv i cannot see time and date when it was taken .. i could see it on my camcorder but not in my project on dvd. how do i put it there? thanx a lot.

  • Web page has no down arrow/scroll bars

    I have a web page I found, that I want to look at and peruse.  I clicked on it, on my new iMac running 10.6.8 with safari 5.0.5 and while the page will load, there is not ability to scroll down the page.  There is now up/down arrow or blue ball tab t