Wifi connecting to network

I am not able to connect to my WiFi network via Blackberry. I go to WiFi Network>My WiFi home network> WiFi Connection Status Attempt 1 of 3 > Error message "Timed Out"
I never get past  WiFi Connection Status Attempt 1 of 3. It just times out. 
What's up?

I have an old G3 and have failed to get it to connect to the wifi. Can you tell me how you got as far as you are?

Similar Messages

  • Bug with 5.1.1 on auto wifi connection/forgot network missing

    since i have updated to 5.1.1 on my 4s, the phone does not auto connect to my wi fi when im at home.
    In fact its doing my head in when i use face time, put phone down and 20 mins later asks me to re connect to wifi for face time
    i looked into my settings for wifi and can see the " forgot network " option as well has disappered since the update?
    on my ipad 3, at top says forgot this network
    heres the settings:

    tried reset, its all ok on my ipad 3 so something with 4s
    i think i have solved it by renaming the router, so far after 40 mins ok, but will report back

  • Wifi connecting to network bu no internet conection

    I am having difficulty getting my computer to connect to the internet through wifi. According to the computer i can get onto the network but i cannot get the internet, however when I hard wire the conection i can get on it, any ideas?

    I have an old G3 and have failed to get it to connect to the wifi. Can you tell me how you got as far as you are?

  • Repeated loss wifi connection, although network st...

    I have a home hub 2.0, over the last 2-3 months I need to reset the hub 4-6 times a day at least. Suddenly while using the wifi my device(s) disconnect despite the network still being visible. When I try to reconnect my PC, Mac, iPhone and ipad all tell me connection isn't possible. No warning lights on home hub. I have changed the channel once but this doesn't seem to have helped.
    Also is it worth upgrading to the new home hub (no infinity in my area) even if I can sort this issue out, is it that much better? Thanks

    there are known problems with the HH2  http://forumhelp.dyndns.info/hardware/hh2/hh2_issues.html
    you could try a factory reset using recessed button on back and holding till lights flash but if that does not solve it then phone CS and complain and ask for new hub  as long as still in contract then replacement should be free
    multiple resets will cause your noise margin to increase with your conenction speed decreasing resulting in lower profile and lower download speed
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • My  2012 Mini OS 10.7.5 cannot see the Ethernet connection to my Actiontec GT701 WG.  The Network Preferences says "cable unplugged".  The WiFi connection is working fine.  Please Thank You

    My  2012 Mini OS 10.7.5 cannot see the Ethernet connection to my Actiontec GT701 WG.  The Network Preferences says "cable unplugged".  The WiFi connection is working fine.  Please Thank You

    Never mind, problem solved.  When I retunred to the Network tab the message had changed to "connected, no IP address" so I got that from the WiFi tab and configured the Ethernet manually.  Have a nice day @:-)#

  • I have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me

    i have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me???

    If Join was on then your home wi-fi must be set to Non-Broadcast.  If you did not set this up (maybe your provider did) then you will need to find the Network Name they used, and any password they used.  The SSID is Security Set ID and to see more try http://en.wikipedia.org/wiki/SSID .  Basically it is the name used to identify your router/network.  A lot of times the installer will leave it set as LinkSys, or Broadcom or whatever the manufacturer set it as for default.  Your best bet is to get whoever installed it to walk you through how they set it up, giving you id's and passwords so you can get in.  HOWEVER, if you are not comfortable with this (if you set security wrong, etc.) you would be well ahead of the game to hire a local computer tech (networking) to get this working for you.  You can also contact the vendor of your router and get help (if it is still in warranty), or at least get copies of the manuals as pdf files.  Sorry I can't give you more help, I hope this gives you an idea where to go from here to find more.

  • My i Phone drops WiFi connection after just a few minutes and wont reconnect unless I reset the network settings and reboot the  phone?

    My i Phone 4s has suddenly started to drop wifi connection after nealy months of near perfect connections?
    To restore a wifi connection I have to reset the network settings and restart the phone, this only fixes the issues for around 2-3 mins?
    Other quick fixes like switching wifi on and off/ switching to airoplane mode for a few secconds have no impact.
    This is really annoying as I am using my data allowence very quickly, and as the phone is continually searching for a wifi connection the battery time has reduced dramatically.
    I just wondered if any one else has the same issue, and any suggestions as to how I can fix this.
    Thanks in Advance

    Reboot.
    Restore (from backup)
    Restore (as new)
    Test after each step. If one of them doesn't fix the problem, make an appointment at the genius bar.

  • I'm staying at my house in Peru, South America. From my PC laptop I can see my neighbor's wifi service network, but I also have my mini iPad and I can not figure out why I can't get any wifi connection from my area. Is there a setting I need to do?

    I'm staying at my house in Peru, South America. From my PC laptop I can see my neighbor's wifi service network, but I also have my mini iPad and I can not figure out why I can't get any wifi connection from my area. Is there a setting I need to do?

    Yes, I did try to go on my settings>wifi and was waiting for any wifi signals to pick up, but nothing shows up. But on my PC I get a whole list of networks to choose from. Regarding my neighbor, I already have her password that is why I was able to get it on my PC, the problem is that the mini Ipad is not picking any signal neither can it locate me when I go to maps.

  • Hi, how do i stop my macbook pro not to automatically connect to a wifi connection that is not my preferred network? i want to automatically connect my macbook to my preferred network everytime i turn on my laptop. thank you.

    hi, how do i stop my macbook pro not to automatically connect to a wifi connection that is not my preferred network? i want to automatically connect my macbook to my preferred network everytime i turn on my laptop. thank you.

    System Preferences > Network > WiFi
    To give a network the highest priority, drag the name of the network to the top of the list. This is the network your computer will attempt to join first.
    http://support.apple.com/kb/PH13797

  • I have a MacBook Pro.  My mac can detect wifi.  But will not connect. I did get connected vis TCP/IP settings but I can't connect to any wifi anywhere.  Network diagnostic has a green light for wi-fi and wi-fi settings.  Red light for the rest.

    I have a MacBook Pro.  My mac can detect wifi.  But will not connect anywhere. I did get connected via TCP/IP settings but I can't connect to any wifi anywhere.  Network diagnostic has a green light for wi-fi and wi-fi settings.  Red light for the rest. (Network settings, ISP, Internet and server.)

    Hello NotAppleSavy,
    Thanks for the question. After reviewing your post, it sounds like the computer wont connect to networks. I see you have used network diagnostic. I would recommend that you read this article, there are a lot of other things you can do in this article that may be able to help you resolve or isolate the issue.
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • Device is connected to to a wifi network but does not have access to Blackberry services over wifi connection

    please help me, my blackberry curve has been working perfectly fine (everything network and wifi connection are working great) since i got it but all of the sudden when i connect to our wifi at home i noticed that the wifi logo on the upper screen is grayed out. i checked the manual and it says: device is connected to to a wifi network but does not have access to Blackberry services over wifi connection. i dont  know what to do, i tried the hard reset (removed batt for 1 min while phone is on and put it back in) i also tried to remove the wifi profile and added it back up but still nothing seems to work, my service provider has BB services available on my phone, i can received BBM, pushed email, use FB on my phone using my network but i cant use my wifi to browse.. what should i do? help me please!

    With a PC, the Windows Firewall and/or the anti-virus software will sometimes block an attempted Internet connection.
    Check both applications to see if you can find a "blocked" item and then take steps to "allow" the connection.
    If still no luck, temporarily disable the wireless security for a short period to see if the PC can connect that way. If it can.....then you know it is security related issue.
    See if the PC can connect using a setting like WPA-PSK-TKIP. The equivalent Apple setting would be WPA/WPA2 Personal.

  • I had no problem with my IPad 3 connecting to my wi-fi but for some reason lately it tell me can not connect to network.  I reset both my wifi and my ipad and I still get the same error.

    I've had my IPad 3 for awhile and had no problems with it.  The other day I went to connect to my wi-fi and it told me could not connect to network.  It recognizes my wi-fi but won't connect.  I have shut off my wi-fi and still the same problem.  Today I reset my ipad back to factory and when I get to the wifi setup I still get unable to join the network.  What is wrong

    Dont use a password to connect the ipad and try if unable to join happens try another network. After that it is a repair. Now most likely it is the password on router. typically you access your router with http://192.168.1.1/ BUT it may be different if you changed it or your router uses different one.

  • My macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?

    my macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?

    This can be caused by a number of issues.
    Was everything working and then suddenly stopped??
    Or is this a new clean setup and has never worked.
    Do you have a cable modem which is not a router and the TC setup in bridge? That will cause it. The TC must be in router mode, ie dhcp and nat.
    Check the IP the MBP gets including dns and gateway..
    Then check the ipad/iphone.. post what IP dns and gateway (router in applespeak) they get.

  • IPHONE 5: can't receive calls & random error messages, such as "could not activate cellular data network" and "no connection - network unavailable, please connect to wifi or cellular network."  This occurs even when signal strength or wifi is operational.

    IPHONE 5:  can't receive calls and random error messages, such as "could not activate cellular data network" and "no connection - network unavailable, please connect to wifi or cellular network."  This occurs even when signal strength or wifi is operational, and it does not matter whether wifi is on or off.  ATT went through the standard protocol - resetting network, resetting sim card, etc.  No changes.  Other phones working fine in same region with same carrier.  Apple's solution is to restore software, but haven't gone there yet.  Anyone successfully addressed this/these issues?   

    I should point out that it worked when the iPhone was set back to factory settings, but when restored with the backup, data/internet no longer works again, and I get the "Could not activate cellular data network" error message yet again.

  • I'm having trouble with back to my MAC.  I had everything working on my home wifi network but now I am at my daughter's house and trying to connect via a verizon hotspot wifi connection.  I'm wondering if the Verizon hookup is a problem.

    I'm having trouble with back to my MAC.  I had everything working on my home wifi network but now I am at my daughter's house and trying to connect via a verizon hotspot wifi connection.  I'm wondering if the Verizon hookup is a problem.

    I finally figured it out.  Needed to update her Airport firmware and allow guest access, and also changed Sharing preferences to Allow Access for All Users.

Maybe you are looking for

  • HT5318 New itunes isn't  program is not installing on my windows 7, 64bt.

    I tryed several times

  • Manual creation of planned order in REM

    Hi,  Can we manually create a planned order in repetitive manufacturing? I know that in case we run MRP , then planned order for finished is created with order type 'PE' due to which it cannot be converted to production order. I dont want to run MRP

  • Profit and Loss Product wise, Customer wise

    Hi Gurus, How to generate Profit and loss Product wise and customer wise. Product wise - Product cost, sales and Net profit from product Customer wise - Product cost sold (COGS) and sales, net profit from customer. Please advise.

  • EP 7 with ESS/MSS errors

    Hi Guys We are using EP 7 sp13 with ECC 6 (sp13 ) we currently have ESS/MSS sp11 on it. All the ESS links work except EMPLOYEE SEARCH> CHANGE OWN DATA. it gives me the following error. com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: fail

  • Intercompany Billing Idoc

    Hi All, We have been using idocs in order to process intercompany billing scenario. SD Billing will be saved and automatic invoice verification should be posted on the other side. Instead of posting, invoice verification document is getting parked. H