WiFi Connection Constantly Drops

I have been experiencing this issue about 3 days after (late august 09) I purchased my Macbook Pro.. the wifi signal drops and then picks up about 20-30 seconds later. I upgraded my software to 10.5.8, and now Snow Leopard. None of these upgrades seem to have fixed the problem and it is starting to become a real nuisance since I use my Mac for distance learning and I would be SOL if my internet connection drops during a test or quiz of some sort (knock on wood). I am pretty new to Mac so I am not sure if this is a common issue or not.

Welcome to Apple Discussions
Are you using a cordless phone in the house (or is your neighbour) by any chance ? It might be on the same wireless channel that Airport is using and interfering with the signal. If so try changing the channel on the phone most have a way to change it.
Also, try running /Utilities/Console and clicking All Messages top left, see if it shows anything else happening around the time of the dropout (post the lines here if you're not sure what they mean)

Similar Messages

WiFi connection is dropped on CTRL-SHIFT-Eject

Hi,
I use the keyboard shortcut CTRL-SHIFT-Eject to switch off my display and lock the computer when I am leaving my desk.
Unfortunately, this also seems my WiFi Connection to drop.
Is there any way I can prevent this?
Thanks,
equi

Hi admisi
This issue is very strange. I have a Satellite P20 and my e800 is also connected via the USB cable but I really have no this kind of problems. The wireless connection to my router is configured on both units and I can use it both on the same time (in this case I usually remove the PDA from the cradle).
If I understand you right you use just one WLAN. Do you have the same problem if you remove PDA from the cradle?

TS4611 I have just received my second MacBook Air 11" the Wifi connection keeps dropping. Also after 3 meters away it keeps searching for network! It is the second try and the same issue. Will Apple ever come up with a solution?

I have just received my second MacBook Air 11" the Wifi connection keeps dropping. Also, after 3 meters away from the rooter it keeps searching for network! It is the second try and the same issues. Will Apple ever come up with a solution? There is a program pack for the connection issue but I cannot believe that this computer wifi keeps connected only while nearby the rooter!

Applied this update?
http://support.apple.com/kb/TS4611?viewlocale=en_US&locale=en_US
If the update is installed aready, you may have to wait until OS X 10.8.5
update if and when it is relased.
Best.

My Windows Airport Extreme wifi connection keeps dropping on a partitioned MacBook Pro.

My Windows Airport Extreme wifi connection keeps dropping on a partitioned MacBook Pro. I have read many online threads without a solution. Do you have one?

My Windows Airport Extreme wifi connection keeps dropping on a partitioned MacBook Pro. I have read many online threads without a solution. Do you have one?

Why does my wifi connection keep dropping in and out?

I have Samsung Galaxy Note 2. The wifi is connected to the wireless router and is the only pc of equipment that is. Full bars. Yet the note keeps dropping the wifi saying it has authenticity errors? My previous cell had absolutely no issues. And its a new router.

I regret to learn of the issues, funeralguy77! Lets figure it out together. Can you try to connect another device to the same WiFi connection. Does it connect? Have you tried to delete/forget the connection and trying again?
Please share additional details so that we can help!
Thank you,
LenaA_VZW
Follow us on Twitter @VZWSupport

HT1338 wifi connection keeps dropping off on macbook pro

hi, i just bought a Macbook Pro 13" and find that the wifi connection on my Macbook keeps dropping off every few minutes. i have tried numerous measures suggested that i could find on the net but the problem still persists. i don't know if it has anything to do with the Norton Internet Security that i installed on the laptop. pls help. thanks.

Wi-Fi: How to troubleshoot Wi-Fi connectivity
Wi-Fi Problems in OS X Yosemite
Wireless Diagnostics
Also try turning off Bluetooth.

Itouch loses wifi connection constantly

itouch constantly loses wifi connection, similar itouch has no such problem, updated software to latest version available but issue persists

Additional information, I have D-Link router that came free when I signed up with my cable company so I'm sure it's a basic model. I did update the firmware to the latest and greatest as well.

Wifi connection keeps dropping from mbp

how disappointing. after spend a few years thinking about switching to mac from pc i finally pulled the trigger and was looking forward to some issue free computing.
after investing in a new 17" mac book pro how disappointing it is to find that it drops the wifi connection every few minutes.
I live in the country so have no other wifi networks nearby to cause interferance. in the house we have 2 iphones, an ipad, samsung netbook and sony laptop all of which have no issues whatsoever with the connection...ever.
during browsing the signal strength will suddenly drop to zero. to get back on I have to click on airport and select the network name again and a few seconds later the connection is back there, fulll stregth.
I am only ever a few meters away from the router (4-5m) so range is not the issue. i've installed all software updates so that can't be an issue.
come on apple - this is not the user experiance i was looking for from a £1500 machine.
i've googled the issue and tried a few of the solutions people have suggested but had no joy.
any ideas how i cn fix the issue?

I also find the experience with Wi Fi on the unibody MBP of mid 2010 production less than stellar. I have a MBP, 15", i7 and also decided to 'pull the plug' on Windoze and get the Mac experience. Build quality is stellar, human/machine interface off the charts and a blast to use. BUT, that said, we have a Linksys router and five other PC's, plus numerous other toys running Wi Fi including our Netflix (Vizio) box....and the only thing that EVER drops a signal is Mac....and I do mean the ONLY thing.
From what I can tell in researching the issue (and I've done a TON of it!) is the encryption mode seems to be far, far more sensitive on the MBP's than similar Windows machines. The PC's just take whatever signal you feed them and are happy....the MBP seems to balk sometimes and I've juggled my settings on it until now I do have a robust connection but still feel Apple needs to research this MUCH more....there are a ton of complaints that all center on mid-year 2010 produced MBPs of all sizes, all processors and it's not confined to this message board, they're everywhere!
Fuel to the fire comes if you run an Airport Express too. We've got one for running our Bose sound system and it also just drops out....have arrived home and see the green light changed to orange and have to run the Airport utility to get it synced back up.
My .02 cents worth, at least.

When in sleep mode my wifi connection keeps dropping out

Since updating to iOS 6 on my iPad 3 when I but my pad into sleep mode I loss wifi connection. When I wake the pad the wifi connection comes back.
Any help would be appreciated.

Not likely an infection at all.
Wake from sleep is usually some problematic USB or FW device.
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for Sleep/Wake problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport in 10.4 & below, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

Galaxy Note Edge Wifi Connection keeps dropping off

My wifi connections keeps disconnecting even after many attempts to login and getting connected on my home wifi it disconnects within a few seconds. Checked my modem and router and all is good (up to date firmware) and no connection issues on other devices. I verified my Edge is up to date as well. I am at a loss as to why it keeps auto disconnecting from my wifi. I tested tethering to my other cell phone and it stayed connected to it. So where do I go from here?

Cesmenow,
Thanks for reaching out to us. We can assist you. To confirm, this is only happening on your home wi-fi connection or do you also experience it with all wi-fi's?
We can try a couple of troubleshooting steps to resolve this: First, try resetting the app preferences by going to Settings>General>Application manager>Applications then press Settings>Reset app preferences. Tell us if this helps.
If not, then please run your device in Safe Mode - http://tinyurl.com/oo54noe and try again. This turns off all 3rd party apps. Tell us if it helps.
Thank you,
Samsung Support ^Kov

Why does my wifi connection keep dropping every few seconds

my new mac air is only a week old - it was working perfectly til yesterday now it won't hold a wireless connection. won't even hold with an ethernet connection to mobile phone.

I regret to learn of the issues, funeralguy77! Lets figure it out together. Can you try to connect another device to the same WiFi connection. Does it connect? Have you tried to delete/forget the connection and trying again?
Please share additional details so that we can help!
Thank you,
LenaA_VZW
Follow us on Twitter @VZWSupport

T400 WiFi connection keeps dropping

My T400 WiFi keeps dropping the connection, and wonder if anyone has any suggestions. When it drops, I've tried to reconnect by going to Network and Sharing Center, clicking on Wireless Network Connection and try to restore from there.
I get a repair window, then nothing happens. The machine seems to lock up - I lose the task bar, the Windows button doesn't work, and I have to force shutdown via Ctrl-Alt-Del. When it boots up again, the wireless reconnects without problems, but then will drop out again after a few hours.
I've tried reinstalling the most recent drivers for the wireless card, but to no avail.
Any suggestions, please?

You can try either of these and see if they help.
Tap Settings, then tap Safari on the left side. Then on the right side - tap clear history, clear cookies, clear cache. Clear all three. Reboot your iPad. Hold down on the sleep button at the top until the red slider appears and slide to power off. Then hold down on the sleep button until the Apple logo appears and the iPad will restart. Launch Safari and see if helped.
If that doesn't help, try this. Tap Settings, then tap General on the left side, then scroll down on the right side and tap Reset, then tap Reset Network Settings at the top. Reboot your iPad as described above. Go to WiFi select your network, enter your password and try again.

My home WiFi connection keeps dropping, how can I fix this?

I have a MBP Mid2009 which is running on Yosemite. A couple of months ago it started giving a nosy issue: At home when connected to my home network, after being connected for 1 minute the connection drops, keeps connected to the router via WiFi but the internet drops. This only happens when the network is password protected, once, I removed the password and connection had no issues. Again this only happens at home, it is an Arris router and only happens when I assign a password.

Hello joe2616,
Thanks for using Apple Support Communities.
To troubleshoot this issue where your Wi-Fi network is dropping, please follow the directions outlined below.
Symptom: The network connection drops unexpectedly
Your Mac may not not stay connected to your Wi-Fi network reliably.
Your Mac may stop accessing the Internet during use.
Solution
Use these steps if your computer disconnects from its Wi-Fi network unexpectedly.
Check your range to the Wi-Fi router and reduce the effect of interference.
If your computer is too far from your Wi-Fi router or your environment has too much Wi-Fi interference, then your computer may not detect the Wi-Fi network properly. The easiest way to check for range limits with your Wi-Fi network is to move your computer or your Wi-Fi router closer together and make sure that there are no obstructions (such as walls, cabinets, and so forth) between the router and your computer.See Potential sources of wireless interference for more information about interference and solutions.
Try connecting to a different Wi-Fi network. If your computer works fine when connected to a different Wi-Fi network, then the issue may be related to your network router or ISP. In that case, contact the manufacturer of your router or your ISP.
Wi-Fi: How to troubleshoot Wi-Fi connectivity - Apple Support
Thanks for using the Apple Support Communities!
Cheers,
Alex H.

Connection constantly dropping with edimax ew-7612uan USB adapter

Hi there,
I have just installed a newly purchased edimax ew-7612uan USB wireless adapter, the problem that I'm getting is that the connection works fine on boot however it keeps dropping very frequently.
This can be reset by running netctl restart my-network. which is a temporary fix but I can't keep on doing this every 5 minutes or so when the connection drops.
I don't think there is a problem with the USB adapter as it appears to work fine in windows (I don't work fine with windows though!).
The same problem has happened on both of my Arch computers... I don't use any other distributions so I don't know if this is an arch specific problem or a general Linux problem. It also happens when using the live disk.
The old adapter is still installed in the box but once I can get this one working properly it will be removed.
The output of dmesg is as follows
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.8-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 20140206 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Apr 1 12:19:51 CEST 2014
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=104c8e28-5731-4470-8911-313aca8c0d0f rw quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007fedf7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007fedf800-0x000000007fedffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007fee0000-0x000000007fee2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007fee3000-0x000000007feeffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007fef0000-0x000000007fefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: HP-Pavilion GB394AA-ABU a6030.uk/LEONITE, BIOS 5.17 04/20/2007
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x7fedf max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CEFFF write-protect
[ 0.000000] CF000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000f5f40-0x000f5f4f] mapped at [ffff8800000f5f40]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b3e000, 0x01b3efff] PGTABLE
[ 0.000000] BRK [0x01b3f000, 0x01b3ffff] PGTABLE
[ 0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7fc00000-0x7fdfffff]
[ 0.000000] [mem 0x7fc00000-0x7fdfffff] page 2M
[ 0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7c000000-0x7fbfffff]
[ 0.000000] [mem 0x7c000000-0x7fbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x7bffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x7bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x7fe00000-0x7fedefff]
[ 0.000000] [mem 0x7fe00000-0x7fedefff] page 4k
[ 0.000000] BRK [0x01b42000, 0x01b42fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x379ea000-0x37cecfff]
[ 0.000000] ACPI: RSDP 00000000000f8310 000024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 000000007fee30c0 000054 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 000000007fee7a80 0000F4 (v03 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 000000007fee3280 004798 (v01 HPQOEM SLIC-CPC 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 000000007fee0000 000040
[ 0.000000] ACPI: SLIC 000000007fee7cc0 000176 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
[ 0.000000] ACPI: HPET 000000007fee7e80 000038 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000098)
[ 0.000000] ACPI: MCFG 000000007fee7f00 00003C (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 000000007fee7bc0 000084 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
[ 0.000000] ACPI: SSDT 000000007fee8460 000304 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007fedefff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7fedefff]
[ 0.000000] NODE_DATA [mem 0x7feda000-0x7fedefff]
[ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x7fedefff]
[ 0.000000] On node 0 totalpages: 523901
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8124 pages used for memmap
[ 0.000000] DMA32 zone: 519903 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x7ff00000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88007fc00000 s86336 r8192 d24256 u524288
[ 0.000000] pcpu-alloc: s86336 r8192 d24256 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515692
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=104c8e28-5731-4470-8911-313aca8c0d0f rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2047396K/2095604K available (5271K kernel code, 836K rwdata, 1676K rodata, 1124K init, 1324K bss, 48208K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:8448 nr_irqs:712 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 8388608 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2133.881 MHz processor
[ 0.003339] Calibrating delay loop (skipped), value calculated using timer frequency.. 4269.58 BogoMIPS (lpj=7112936)
[ 0.003343] pid_max: default: 32768 minimum: 301
[ 0.003383] Security Framework initialized
[ 0.003400] AppArmor: AppArmor disabled by boot time parameter
[ 0.003402] Yama: becoming mindful.
[ 0.003637] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.004945] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.005645] Mount-cache hash table entries: 256
[ 0.005953] Initializing cgroup subsys memory
[ 0.005966] Initializing cgroup subsys devices
[ 0.005969] Initializing cgroup subsys freezer
[ 0.005972] Initializing cgroup subsys net_cls
[ 0.005975] Initializing cgroup subsys blkio
[ 0.006006] CPU: Physical Processor ID: 0
[ 0.006008] CPU: Processor Core ID: 0
[ 0.006011] mce: CPU supports 6 MCE banks
[ 0.006021] CPU0: Thermal monitoring enabled (TM2)
[ 0.006030] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
[ 0.006122] Freeing SMP alternatives memory: 20K (ffffffff819ec000 - ffffffff819f1000)
[ 0.007776] ACPI: Core revision 20131115
[ 0.010162] ACPI: All ACPI Tables successfully acquired
[ 0.013362] ftrace: allocating 21068 entries in 83 pages
[ 0.023793] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.057912] smpboot: CPU0: Intel(R) Core(TM)2 CPU 6420 @ 2.13GHz (fam: 06, model: 0f, stepping: 06)
[ 0.059999] APIC calibration not consistent with PM-Timer: 4652ms instead of 100ms
[ 0.059999] APIC delta adjusted to PM-Timer: 3346453 (155709996)
[ 0.059999] Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.059999] perf_event_intel: PEBS disabled due to CPU errata
[ 0.059999] ... version: 2
[ 0.059999] ... bit width: 40
[ 0.059999] ... generic registers: 2
[ 0.059999] ... value mask: 000000ffffffffff
[ 0.059999] ... max period: 000000007fffffff
[ 0.059999] ... fixed-purpose events: 3
[ 0.059999] ... event mask: 0000000700000003
[ 0.083418] x86: Booting SMP configuration:
[ 0.089999] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.083422] .... node #0, CPUs: #1
[ 0.089999] x86: Booted up 1 node, 2 CPUs
[ 0.089999] smpboot: Total of 2 processors activated (8538.17 BogoMIPS)
[ 0.090131] devtmpfs: initialized
[ 0.093350] PM: Registering ACPI NVS region [mem 0x7fee0000-0x7fee2fff] (12288 bytes)
[ 0.094547] RTC time: 8:54:04, date: 04/02/14
[ 0.094607] NET: Registered protocol family 16
[ 0.094741] cpuidle: using governor ladder
[ 0.094743] cpuidle: using governor menu
[ 0.094771] ACPI: bus type PCI registered
[ 0.094774] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.094845] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.094848] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.094848] PCI: Using configuration type 1 for base access
[ 0.094952] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.094954] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.094955] mtrr: probably your BIOS does not setup all CPUs.
[ 0.094956] mtrr: corrected configuration.
[ 0.096731] bio: create slab <bio-0> at 0
[ 0.096745] ACPI: Added _OSI(Module Device)
[ 0.096745] ACPI: Added _OSI(Processor Device)
[ 0.096745] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.096745] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.100165] ACPI: SSDT 000000007fee7f80 000175 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
[ 0.100379] ACPI: Dynamic OEM Table Load:
[ 0.100382] ACPI: SSDT (null) 000175 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
[ 0.100470] ACPI: SSDT 000000007fee8390 0000CE (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
[ 0.100675] ACPI: Dynamic OEM Table Load:
[ 0.100678] ACPI: SSDT (null) 0000CE (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
[ 0.100813] ACPI: Interpreter enabled
[ 0.100824] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.100840] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.100842] ACPI: Using IOAPIC for interrupt routing
[ 0.100873] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.100967] ACPI: No dock devices found.
[ 0.103333] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.103333] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.103333] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.103333] acpi PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.103333] acpi PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.103333] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.103333] acpi PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[ 0.103333] acpi PNP0A08:00: host bridge window [mem 0x7ff00000-0xfebfffff] (ignored)
[ 0.103333] PCI: root bus 00: using default resources
[ 0.103333] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.103333] PCI host bridge to bus 0000:00
[ 0.103333] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.103333] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.103333] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.103333] pci 0000:00:00.0: [8086:2770] type 00 class 0x060000
[ 0.103333] pci 0000:00:01.0: [8086:2771] type 01 class 0x060400
[ 0.103333] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.103333] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.103333] pci 0000:00:1d.0: reg 0x20: [io 0xff00-0xff1f]
[ 0.103333] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.103333] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.103333] pci 0000:00:1d.1: reg 0x20: [io 0xfe00-0xfe1f]
[ 0.103333] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.103333] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.103333] pci 0000:00:1d.2: reg 0x20: [io 0xfd00-0xfd1f]
[ 0.103333] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.103333] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.103333] pci 0000:00:1d.3: reg 0x20: [io 0xfc00-0xfc1f]
[ 0.103333] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 0.103333] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.103333] pci 0000:00:1d.7: reg 0x10: [mem 0xfdfff000-0xfdfff3ff]
[ 0.103333] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.103379] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.103420] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.103511] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.103555] pci 0000:00:1f.0: [8086:27b0] type 00 class 0x060100
[ 0.103727] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[ 0.103741] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
[ 0.103750] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
[ 0.103760] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007]
[ 0.103769] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.103778] pci 0000:00:1f.1: reg 0x20: [io 0xf900-0xf90f]
[ 0.103876] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
[ 0.103890] pci 0000:00:1f.2: reg 0x10: [io 0xf800-0xf807]
[ 0.103899] pci 0000:00:1f.2: reg 0x14: [io 0xf700-0xf703]
[ 0.103907] pci 0000:00:1f.2: reg 0x18: [io 0xf600-0xf607]
[ 0.103915] pci 0000:00:1f.2: reg 0x1c: [io 0xf500-0xf503]
[ 0.103923] pci 0000:00:1f.2: reg 0x20: [io 0xf400-0xf40f]
[ 0.103932] pci 0000:00:1f.2: reg 0x24: [mem 0xfdffc000-0xfdffc3ff]
[ 0.103961] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.104042] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.104093] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
[ 0.104236] pci 0000:01:00.0: [1002:7181] type 00 class 0x030000
[ 0.104251] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.104262] pci 0000:01:00.0: reg 0x18: [mem 0xfddf0000-0xfddfffff 64bit]
[ 0.104270] pci 0000:01:00.0: reg 0x20: [io 0xce00-0xceff]
[ 0.104283] pci 0000:01:00.0: reg 0x30: [mem 0xfddc0000-0xfdddffff pref]
[ 0.104314] pci 0000:01:00.0: supports D1 D2
[ 0.104362] pci 0000:01:00.1: [1002:71a1] type 00 class 0x038000
[ 0.104373] pci 0000:01:00.1: reg 0x10: [mem 0xfdde0000-0xfddeffff 64bit]
[ 0.104417] pci 0000:01:00.1: supports D1 D2
[ 0.104457] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.104466] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.104470] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.104473] pci 0000:00:01.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.104477] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.104526] pci 0000:02:01.0: [11c1:5811] type 00 class 0x0c0010
[ 0.104543] pci 0000:02:01.0: reg 0x10: [mem 0xfdeff000-0xfdefffff]
[ 0.104616] pci 0000:02:01.0: supports D1 D2
[ 0.104619] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot
[ 0.104672] pci 0000:02:04.0: [1102:0002] type 00 class 0x040100
[ 0.104690] pci 0000:02:04.0: reg 0x10: [io 0xdf00-0xdf1f]
[ 0.104763] pci 0000:02:04.0: supports D1 D2
[ 0.104806] pci 0000:02:04.1: [1102:7002] type 00 class 0x098000
[ 0.104822] pci 0000:02:04.1: reg 0x10: [io 0xde00-0xde07]
[ 0.104895] pci 0000:02:04.1: supports D1 D2
[ 0.104946] pci 0000:02:05.0: [168c:0013] type 00 class 0x020000
[ 0.104964] pci 0000:02:05.0: reg 0x10: [mem 0xfdee0000-0xfdeeffff]
[ 0.105084] pci 0000:02:08.0: [8086:27dc] type 00 class 0x020000
[ 0.105101] pci 0000:02:08.0: reg 0x10: [mem 0xfdefe000-0xfdefefff]
[ 0.105112] pci 0000:02:08.0: reg 0x14: [io 0xdd00-0xdd3f]
[ 0.105176] pci 0000:02:08.0: supports D1 D2
[ 0.105178] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.105247] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
[ 0.105252] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.105256] pci 0000:00:1e.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.105262] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.105264] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[ 0.105612] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *7 9 10 11 12 14 15)
[ 0.105678] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.105743] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 7 9 10 11 12 14 15)
[ 0.105807] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.105870] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.105934] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.105998] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.106063] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 0.106250] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 0.106258] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.106290] Found 1 acpi root devices
[ 0.106365] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.106365] vgaarb: loaded
[ 0.106365] vgaarb: bridge control possible 0000:01:00.0
[ 0.106365] PCI: Using ACPI for IRQ routing
[ 0.106365] PCI: pci_cache_line_size set to 64 bytes
[ 0.106365] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.106365] e820: reserve RAM buffer [mem 0x7fedf800-0x7fffffff]
[ 0.106365] NetLabel: Initializing
[ 0.106365] NetLabel: domain hash size = 128
[ 0.106365] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.106365] NetLabel: unlabeled traffic allowed by default
[ 0.106365] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.106365] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.106365] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.106689] Switched to clocksource hpet
[ 0.109999] pnp: PnP ACPI init
[ 0.109999] ACPI: bus type PNP registered
[ 0.113399] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.113403] system 00:00: [io 0x0800-0x087f] has been reserved
[ 0.113406] system 00:00: [io 0x0294-0x0297] has been reserved
[ 0.113408] system 00:00: [io 0x0880-0x088f] has been reserved
[ 0.113413] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.113426] pnp 00:01: [dma 4]
[ 0.113459] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.113547] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.113597] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.113626] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.113664] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.113790] pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.113848] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.113911] system 00:08: [io 0x0400-0x04bf] has been reserved
[ 0.113915] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.113958] pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.114177] system 00:0a: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.114182] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.114356] system 00:0b: [mem 0x000cf400-0x000cffff] has been reserved
[ 0.114359] system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.114362] system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.114365] system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.114368] system 00:0b: [mem 0xfed00000-0xfed000ff] has been reserved
[ 0.114371] system 00:0b: [mem 0x7fee0000-0x7fefffff] could not be reserved
[ 0.114374] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.114377] system 00:0b: [mem 0x00100000-0x7fedffff] could not be reserved
[ 0.114380] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.114382] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.114385] system 00:0b: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.114388] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.114390] system 00:0b: [mem 0x000e0000-0x000effff] has been reserved
[ 0.114394] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.114404] pnp: PnP ACPI: found 12 devices
[ 0.114405] ACPI: bus type PNP unregistered
[ 0.120198] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.120198] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.120198] pci 0000:00:01.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.120198] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.120198] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 0.120198] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.120198] pci 0000:00:1e.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.120198] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.120198] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.120198] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.120198] pci_bus 0000:01: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 0.120198] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.120198] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.120198] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.120198] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 0.120198] pci_bus 0000:02: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.120198] NET: Registered protocol family 2
[ 0.120198] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.120198] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.120198] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.120198] TCP: reno registered
[ 0.120198] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.120198] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.120198] NET: Registered protocol family 1
[ 0.120198] pci 0000:01:00.0: Boot video device
[ 0.120198] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
[ 0.120198] PCI: CLS 32 bytes, default 64
[ 0.120198] Unpacking initramfs...
[ 0.191296] Freeing initrd memory: 3084K (ffff8800379ea000 - ffff880037ced000)
[ 0.191480] Scanning for low memory corruption every 60 seconds
[ 0.191882] audit: initializing netlink socket (disabled)
[ 0.191902] type=2000 audit(1396428835.189:1): initialized
[ 0.206560] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.208164] zbud: loaded
[ 0.208353] VFS: Disk quotas dquot_6.5.2
[ 0.208404] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.208606] msgmni has been set to 4004
[ 0.208673] Key type big_key registered
[ 0.208929] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.208971] io scheduler noop registered
[ 0.208973] io scheduler deadline registered
[ 0.209007] io scheduler cfq registered (default)
[ 0.209208] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.209282] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.209302] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.209360] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
[ 0.209362] vesafb: scrolling: redraw
[ 0.209364] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.209895] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004400000, using 5824k, total 5824k
[ 0.265490] Console: switching to colour frame buffer device 175x65
[ 0.320013] fb0: VESA VGA frame buffer device
[ 0.320013] intel_idle: does not run on family 6 model 15
[ 0.320013] GHES: HEST is not enabled!
[ 0.320771] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.321201] Linux agpgart interface v0.103
[ 0.321270] rtc_cmos 00:03: RTC can wake from S4
[ 0.321402] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.321430] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.321540] drop_monitor: Initializing network drop monitor service
[ 0.321607] TCP: cubic registered
[ 0.321718] NET: Registered protocol family 10
[ 0.321912] NET: Registered protocol family 17
[ 0.321924] Key type dns_resolver registered
[ 0.322165] registered taskstats version 1
[ 0.322582] Magic number: 10:872:926
[ 0.322659] rtc_cmos 00:03: setting system clock to 2014-04-02 08:54:05 UTC (1396428845)
[ 0.322694] PM: Hibernation image not present or could not be loaded.
[ 0.324137] Freeing unused kernel memory: 1124K (ffffffff818d3000 - ffffffff819ec000)
[ 0.324139] Write protecting the kernel read-only data: 8192k
[ 0.326967] Freeing unused kernel memory: 860K (ffff880001529000 - ffff880001600000)
[ 0.327354] Freeing unused kernel memory: 372K (ffff8800017a3000 - ffff880001800000)
[ 0.335950] random: systemd-tmpfile urandom read with 1 bits of entropy available
[ 0.337560] systemd-udevd[46]: starting version 212
[ 0.357062] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.360689] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.360743] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.364815] ACPI: bus type USB registered
[ 0.364858] usbcore: registered new interface driver usbfs
[ 0.364871] usbcore: registered new interface driver hub
[ 0.367300] usbcore: registered new device driver usb
[ 0.367497] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.367497] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.367497] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.369227] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 0.369272] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff00
[ 0.370097] hub 1-0:1.0: USB hub found
[ 0.370108] hub 1-0:1.0: 2 ports detected
[ 0.370356] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.370364] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 0.370398] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fe00
[ 0.370561] hub 2-0:1.0: USB hub found
[ 0.370570] hub 2-0:1.0: 2 ports detected
[ 0.370923] ehci-pci: EHCI PCI platform driver
[ 0.371254] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.371263] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 0.371299] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fd00
[ 0.371479] hub 3-0:1.0: USB hub found
[ 0.371489] hub 3-0:1.0: 2 ports detected
[ 0.371685] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.371695] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 0.371731] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fc00
[ 0.371759] SCSI subsystem initialized
[ 0.372294] hub 4-0:1.0: USB hub found
[ 0.372721] hub 4-0:1.0: 2 ports detected
[ 0.373567] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.373575] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 0.380063] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 0.380074] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfdfff000
[ 0.380372] libata version 3.00 loaded.
[ 0.392071] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.392288] hub 5-0:1.0: USB hub found
[ 0.392298] hub 5-0:1.0: 8 ports detected
[ 0.413670] hub 1-0:1.0: USB hub found
[ 0.413685] hub 1-0:1.0: 2 ports detected
[ 0.418065] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.428408] firewire_ohci 0000:02:01.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
[ 0.444932] hub 2-0:1.0: USB hub found
[ 0.444946] hub 2-0:1.0: 2 ports detected
[ 0.475276] hub 3-0:1.0: USB hub found
[ 0.475295] hub 3-0:1.0: 2 ports detected
[ 0.498283] hub 4-0:1.0: USB hub found
[ 0.498296] hub 4-0:1.0: 2 ports detected
[ 0.498418] ata_piix 0000:00:1f.1: version 2.13
[ 0.499273] scsi0 : ata_piix
[ 0.499357] scsi1 : ata_piix
[ 0.499402] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
[ 0.499404] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
[ 0.499515] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.499556] ata2: port disabled--ignoring
[ 0.500252] scsi2 : ata_piix
[ 0.500325] scsi3 : ata_piix
[ 0.500368] ata3: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf400 irq 19
[ 0.500371] ata4: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf408 irq 19
[ 0.699056] ata4.01: NODEV after polling detection
[ 0.705789] ata4.00: ATAPI: HL-DT-STDVDRRW GSA-H30L, S755, max UDMA/33
[ 0.705879] ata1.00: ATA-7: Hitachi HDT725032VLAT80, V54OA42A, max UDMA/133
[ 0.705882] ata1.00: 625142448 sectors, multi 16: LBA48
[ 0.705886] ata1.00: limited to UDMA/33 due to 40-wire cable
[ 0.718854] ata4.00: configured for UDMA/33
[ 0.721647] ata1.00: configured for UDMA/33
[ 0.721797] scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72503 V54O PQ: 0 ANSI: 5
[ 0.725607] ata3.00: ATA-8: SAMSUNG HD320KJ, CP100-10, max UDMA7
[ 0.725612] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.734331] ata3.00: configured for UDMA/133
[ 0.734447] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD320KJ CP10 PQ: 0 ANSI: 5
[ 0.736470] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRRW GSA-H30L S755 PQ: 0 ANSI: 5
[ 0.739885] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 0.739947] sd 0:0:0:0: [sda] Write Protect is off
[ 0.739950] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.739977] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.740339] sd 2:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 0.740397] sd 2:0:0:0: [sdb] Write Protect is off
[ 0.740400] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 0.740426] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.743908] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.743912] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.744145] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 0.748725] sdb: sdb1 sdb2
[ 0.749036] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 0.752217] usb 5-6: new high-speed USB device number 2 using ehci-pci
[ 0.778689] sda: sda1 sda2 sda3 sda4
[ 0.779129] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.929217] firewire_core 0000:02:01.0: created device fw0: GUID 0011d800013adf24, S400
[ 1.006684] usb 5-7: new high-speed USB device number 3 using ehci-pci
[ 1.173252] usb-storage 5-7:1.0: USB Mass Storage device detected
[ 1.173332] scsi4 : usb-storage 5-7:1.0
[ 1.173427] usbcore: registered new interface driver usb-storage
[ 1.197356] tsc: Refined TSC clocksource calibration: 2133.939 MHz
[ 1.616813] EXT4-fs (sda2): mounting ext3 file system using the ext4 subsystem
[ 1.624951] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.920203] random: nonblocking pool is initialized
[ 2.247183] Switched to clocksource tsc
[ 2.253827] scsi 4:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
[ 2.260322] scsi 4:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
[ 2.266946] scsi 4:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
[ 2.273571] scsi 4:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS
[ 2.280559] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[ 2.281310] sd 4:0:0:1: [sdd] Attached SCSI removable disk
[ 2.282059] sd 4:0:0:2: [sde] Attached SCSI removable disk
[ 2.282809] sd 4:0:0:3: [sdf] Attached SCSI removable disk
[ 2.498874] systemd[1]: systemd 212 running in system mode. (+PAM -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP -APPARMOR)
[ 2.499029] systemd[1]: Detected architecture 'x86-64'.
[ 2.499095] systemd[1]: No hostname configured.
[ 2.499100] systemd[1]: Set hostname to <localhost>.
[ 3.019084] systemd[1]: Configuration file /etc/systemd/system/netctl@ethernet\x2dstatic.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
[ 3.052564] systemd[1]: Configuration file /etc/systemd/system/netctl@my\x2dnetwork.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
[ 3.168175] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 3.168523] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 3.168587] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.168600] systemd[1]: Expecting device sys-subsystem-net-devices-enp2s8.device...
[ 3.168617] systemd[1]: Starting Remote File Systems.
[ 3.168629] systemd[1]: Reached target Remote File Systems.
[ 3.168639] systemd[1]: Expecting device sys-subsystem-net-devices-wlp2s5.device...
[ 3.168655] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 3.168691] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.168701] systemd[1]: Starting Paths.
[ 3.168712] systemd[1]: Reached target Paths.
[ 3.168722] systemd[1]: Starting Encrypted Volumes.
[ 3.168732] systemd[1]: Reached target Encrypted Volumes.
[ 3.168756] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 3.168851] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.168865] systemd[1]: Expecting device dev-sda4.device...
[ 3.168877] systemd[1]: Expecting device dev-disk-by\x2duuid-8e743759\x2dc6f4\x2d4e8f\x2dae25\x2d2c24a8cba618.device...
[ 3.168890] systemd[1]: Expecting device dev-disk-by\x2duuid-c96171f5\x2d9704\x2d4abf\x2d84ae\x2d2c4f78252a60.device...
[ 3.168900] systemd[1]: Expecting device dev-disk-by\x2duuid-12EC23D6EC23B341.device...
[ 3.168911] systemd[1]: Starting Root Slice.
[ 3.175997] systemd[1]: Created slice Root Slice.
[ 3.176010] systemd[1]: Starting Delayed Shutdown Socket.
[ 3.176047] systemd[1]: Listening on Delayed Shutdown Socket.
[ 3.176058] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 3.176087] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.176098] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 3.176119] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.176133] systemd[1]: Starting udev Kernel Socket.
[ 3.176155] systemd[1]: Listening on udev Kernel Socket.
[ 3.176169] systemd[1]: Starting udev Control Socket.
[ 3.176193] systemd[1]: Listening on udev Control Socket.
[ 3.176203] systemd[1]: Starting LVM2 metadata daemon socket.
[ 3.176232] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.176243] systemd[1]: Starting User and Session Slice.
[ 3.176438] systemd[1]: Created slice User and Session Slice.
[ 3.176452] systemd[1]: Starting Journal Socket.
[ 3.176501] systemd[1]: Listening on Journal Socket.
[ 3.176518] systemd[1]: Starting System Slice.
[ 3.176712] systemd[1]: Created slice System Slice.
[ 3.176728] systemd[1]: Started File System Check on Root Device.
[ 3.176738] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 3.176940] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 3.176954] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 3.212380] systemd[1]: Started Load Kernel Modules.
[ 3.252481] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 3.253015] systemd[1]: Starting udev Coldplug all Devices...
[ 3.253553] systemd[1]: Mounted FUSE Control File System.
[ 3.253577] systemd[1]: Mounting Configuration File System...
[ 3.254197] systemd[1]: Starting Setup Virtual Console...
[ 3.254782] systemd[1]: Mounting Debug File System...
[ 3.255307] systemd[1]: Mounting Huge Pages File System...
[ 3.285128] systemd[1]: Starting Apply Kernel Variables...
[ 3.285663] systemd[1]: Starting system-netctl.slice.
[ 3.285916] systemd[1]: Created slice system-netctl.slice.
[ 3.285940] systemd[1]: Starting system-getty.slice.
[ 3.286240] systemd[1]: Created slice system-getty.slice.
[ 3.286797] systemd[1]: Started Set Up Additional Binary Formats.
[ 3.286822] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.287292] systemd[1]: Starting Journal Service...
[ 3.287880] systemd[1]: Started Journal Service.
[ 4.510133] EXT4-fs (sda2): re-mounted. Opts: data=ordered
[ 4.568872] systemd-udevd[136]: starting version 212
[ 5.479614] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 5.479621] ACPI: Power Button [PWRB]
[ 5.479693] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 5.479697] ACPI: Power Button [PWRF]
[ 5.490126] thermal LNXTHERM:00: registered as thermal_zone0
[ 5.490129] ACPI: Thermal Zone [THRM] (19 C)
[ 5.629665] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PM2S 1 (20131115/utaddress-251)
[ 5.629673] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PM1K 2 (20131115/utaddress-251)
[ 5.629677] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GPE1 3 (20131115/utaddress-251)
[ 5.629682] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.629685] ACPI Warning: 0x00000000000004b0-0x00000000000004bf SystemIO conflicts with Region \GPO2 1 (20131115/utaddress-251)
[ 5.629689] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.629691] ACPI Warning: 0x0000000000000480-0x00000000000004af SystemIO conflicts with Region \GPIV 1 (20131115/utaddress-251)
[ 5.629695] ACPI Warning: 0x0000000000000480-0x00000000000004af SystemIO conflicts with Region \GPO_ 2 (20131115/utaddress-251)
[ 5.629699] ACPI Warning: 0x0000000000000480-0x00000000000004af SystemIO conflicts with Region \PALD 3 (20131115/utaddress-251)
[ 5.629703] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.629705] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 5.639853] leds_ss4200: no LED devices found
[ 5.687416] ACPI: Fan [FAN] (on)
[ 5.708079] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.931908] cfg80211: Calling CRDA to update world regulatory domain
[ 6.109750] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 6.109754] e100: Copyright(c) 1999-2006 Intel Corporation
[ 6.133562] e100 0000:02:08.0 eth0: addr 0xfdefe000, irq 20, MAC addr 00:1a:92:de:71:43
[ 6.410441] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 6.599698] gameport gameport0: EMU10K1 is pci0000:02:04.1/gameport0, io 0xde00, speed 980kHz
[ 6.659464] [drm] Initialized drm 1.1.0 20060810
[ 6.722900] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 6.926377] iTCO_vendor_support: vendor-support=0
[ 6.963443] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 6.963473] iTCO_wdt: Found a ICH7DH TCO device (Version=2, TCOBASE=0x0460)
[ 6.963581] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 7.184227] Adding 4286784k swap on /dev/sda4. Priority:-1 extents:1 across:4286784k FS
[ 7.195727] microcode: CPU0 sig=0x6f6, pf=0x1, revision=0xc6
[ 7.263090] rtl8192cu: Chip version 0x11
[ 7.334816] ath5k 0000:02:05.0: registered as 'phy1'
[ 7.352471] rtl8192cu: MAC address: 80:1f:02:af:89:eb
[ 7.352477] rtl8192cu: Board Type 0
[ 7.352718] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
[ 7.352752] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
[ 7.352808] usbcore: registered new interface driver rtl8192cu
[ 7.445824] [drm] radeon kernel modesetting enabled.
[ 7.445878] checking generic (e0000000 5b0000) vs hw (e0000000 10000000)
[ 7.445880] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[ 7.316873] systemd-udevd[150]: renamed network interface eth0 to enp2s8
[ 7.445900] Console: switching
[ 7.445902] to colour dummy device 80x25
[ 7.446670] [drm] initializing kernel modesetting (RV515 0x1002:0x7181 0x1462:0x0400).
[ 7.446689] [drm] register mmio base: 0xFDDF0000
[ 7.446691] [drm] register mmio size: 65536
[ 7.446807] ATOM BIOS: 113
[ 7.446821] [drm] Generation 2 PCI interface, using max accessible memory
[ 7.446827] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 7.446830] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[ 7.446845] [drm] Detected VRAM RAM=512M, BAR=256M
[ 7.446847] [drm] RAM width 128bits DDR
[ 7.446916] [TTM] Zone kernel: Available graphics memory: 1026428 kiB
[ 7.446918] [TTM] Initializing pool allocator
[ 7.446923] [TTM] Initializing DMA pool allocator
[ 7.446942] [drm] radeon: 512M of VRAM memory ready
[ 7.446944] [drm] radeon: 512M of GTT memory ready.
[ 7.446965] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 7.458262] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[ 7.459147] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 7.459171] radeon 0000:01:00.0: WB enabled
[ 7.459176] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000000 and cpu addr 0xffff88007bb31000
[ 7.459179] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 7.459180] [drm] Driver supports precise vblank timestamp query.
[ 7.459192] [drm] radeon: irq initialized.
[ 7.459208] [drm] Loading R500 Microcode
[ 7.476935] platform microcode: Direct firmware load failed with error -2
[ 7.476939] platform microcode: Falling back to user helper
[ 7.477387] microcode: CPU1 sig=0x6f6, pf=0x1, revision=0xc6
[ 7.477402] platform microcode: Direct firmware load failed with error -2
[ 7.477405] platform microcode: Falling back to user helper
[ 7.477982] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 7.503453] [drm] radeon: ring at 0x0000000020001000
[ 7.503490] [drm] ring test succeeded in 6 usecs
[ 7.503671] [drm] ib test succeeded in 0 usecs
[ 7.503948] [drm] Radeon Display Connectors
[ 7.503950] [drm] Connector 0:
[ 7.503951] [drm] DVI-I-1
[ 7.503953] [drm] HPD2
[ 7.503955] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 7.503957] [drm] Encoders:
[ 7.503958] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 7.503960] [drm] DFP3: INTERNAL_LVTM1
[ 7.503961] [drm] Connector 1:
[ 7.503963] [drm] SVIDEO-1
[ 7.503964] [drm] Encoders:
[ 7.503965] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 7.503967] [drm] Connector 2:
[ 7.503968] [drm] DVI-I-2
[ 7.503969] [drm] HPD1
[ 7.503971] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 7.503973] [drm] Encoders:
[ 7.503974] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 7.503976] [drm] DFP1: INTERNAL_KLDSCP_TMDS1
[ 7.583351] [drm] fb mappable at 0xE00C0000
[ 7.583351] [drm] vram apper at 0xE0000000
[ 7.583351] [drm] size 7258112
[ 7.583351] [drm] fb depth is 24
[ 7.583351] [drm] pitch is 6912
[ 7.583719] fbcon: radeondrmfb (fb0) is primary device
[ 7.600235] Console: switching to colour frame buffer device 210x65
[ 7.605874] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 7.605877] radeon 0000:01:00.0: registered panic notifier
[ 7.605883] [drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 0
[ 7.625781] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 7.626479] rtlwifi: wireless switch is on
[ 7.642639] fuse init (API version 7.22)
[ 7.647140] ath: EEPROM regdomain: 0x0
[ 7.647144] ath: EEPROM indicates default country code should be used
[ 7.647146] ath: doing EEPROM country->regdmn map search
[ 7.647149] ath: country maps to regdmn code: 0x3a
[ 7.647151] ath: Country alpha2 being used: US
[ 7.647153] ath: Regpair used: 0x3a
[ 7.647274] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 7.647537] ath5k: phy1: Atheros AR5212 chip found (MAC: 0x56, PHY: 0x41)
[ 7.647540] ath5k: phy1: RF5111 5GHz radio found (0x17)
[ 7.647543] ath5k: phy1: RF2111 2GHz radio found (0x23)
[ 7.709874] systemd-udevd[143]: renamed network interface wlan1 to wlp2s5
[ 8.136233] systemd-udevd[141]: renamed network interface wlan0 to wlp0s29f7u6
[ 8.322562] coretemp coretemp.0: Using relative temperature scale!
[ 8.322706] coretemp coretemp.0: Using relative temperature scale!
[ 8.594743] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input5
[ 8.638575] mousedev: PS/2 mouse device common for all mice
[ 9.284691] EXT4-fs (sda3): mounting ext3 file system using the ext4 subsystem
[ 9.328865] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: data=ordered
[ 10.357627] IPv6: ADDRCONF(NETDEV_UP): enp2s8: link is not ready
[ 10.363499] e100 0000:02:08.0 enp2s8: NIC Link is Up 100 Mbps Full Duplex
[ 10.363772] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s8: link becomes ready
[ 10.865860] systemd-journald[119]: Received request to flush runtime journal from PID 1
[ 11.002834] rtl8192cu: MAC auto ON okay!
[ 11.035475] rtl8192cu: Tx queue select: 0x05
[ 11.407281] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u6: link is not ready
[ 12.592937] wlp0s29f7u6: authenticate with 2c:39:96:b3:ba:40
[ 12.617024] wlp0s29f7u6: send auth to 2c:39:96:b3:ba:40 (try 1/3)
[ 12.654273] wlp0s29f7u6: authenticated
[ 12.659239] wlp0s29f7u6: associate with 2c:39:96:b3:ba:40 (try 1/3)
[ 12.663526] wlp0s29f7u6: RX AssocResp from 2c:39:96:b3:ba:40 (capab=0x431 status=0 aid=44)
[ 12.663558] wlp0s29f7u6: associated
[ 12.663598] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29f7u6: link becomes ready
[ 216.768500] perf samples too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 50100
[ 295.526133] wlp0s29f7u6: deauthenticating from 2c:39:96:b3:ba:40 by local choice (reason=3)
[ 295.538508] cfg80211: Calling CRDA for country: US
[ 295.779488] rtl8192cu: MAC auto ON okay!
[ 295.813132] rtl8192cu: Tx queue select: 0x05
[ 296.188680] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u6: link is not ready
[ 297.158587] wlp0s29f7u6: authenticate with 2c:39:96:b3:ba:40
[ 297.171430] wlp0s29f7u6: send auth to 2c:39:96:b3:ba:40 (try 1/3)
[ 297.181575] wlp0s29f7u6: authenticated
[ 297.185043] wlp0s29f7u6: associate with 2c:39:96:b3:ba:40 (try 1/3)
[ 297.198798] wlp0s29f7u6: RX AssocResp from 2c:39:96:b3:ba:40 (capab=0x431 status=0 aid=44)
[ 297.198839] wlp0s29f7u6: associated
[ 297.198885] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29f7u6: link becomes ready
[ 466.957760] perf samples too long (4993 > 4990), lowering kernel.perf_event_max_sample_rate to 25200
[ 653.237523] wlp0s29f7u6: deauthenticating from 2c:39:96:b3:ba:40 by local choice (reason=3)
[ 653.252189] cfg80211: Calling CRDA for country: GB
[ 653.492515] rtl8192cu: MAC auto ON okay!
[ 653.526155] rtl8192cu: Tx queue select: 0x05
[ 653.902071] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u6: link is not ready
[ 654.830321] wlp0s29f7u6: authenticate with 2c:39:96:b3:ba:40
[ 654.843456] wlp0s29f7u6: send auth to 2c:39:96:b3:ba:40 (try 1/3)
[ 654.863972] wlp0s29f7u6: authenticated
[ 654.867473] wlp0s29f7u6: associate with 2c:39:96:b3:ba:40 (try 1/3)
[ 654.879214] wlp0s29f7u6: RX AssocResp from 2c:39:96:b3:ba:40 (capab=0x431 status=0 aid=44)
[ 654.879258] wlp0s29f7u6: associated
[ 654.879319] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29f7u6: link becomes ready
[ 845.720733] wlp0s29f7u6: deauthenticating from 2c:39:96:b3:ba:40 by local choice (reason=3)
[ 845.733072] cfg80211: Calling CRDA to update world regulatory domain
[ 845.972288] rtl8192cu: MAC auto ON okay!
[ 846.005180] rtl8192cu: Tx queue select: 0x05
[ 846.376969] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u6: link is not ready
[ 847.303644] wlp0s29f7u6: authenticate with 2c:39:96:b3:ba:40
[ 847.316223] wlp0s29f7u6: send auth to 2c:39:96:b3:ba:40 (try 1/3)
[ 847.341107] wlp0s29f7u6: authenticated
[ 847.345443] wlp0s29f7u6: associate with 2c:39:96:b3:ba:40 (try 1/3)
[ 847.369345] wlp0s29f7u6: RX AssocResp from 2c:39:96:b3:ba:40 (capab=0x431 status=0 aid=44)
[ 847.369380] wlp0s29f7u6: associated
[ 847.369422] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29f7u6: link becomes ready
[ 1165.243225] wlp0s29f7u6: deauthenticating from 2c:39:96:b3:ba:40 by local choice (reason=3)
[ 1165.255458] cfg80211: Calling CRDA for country: GB
[ 1165.501950] rtl8192cu: MAC auto ON okay!
[ 1165.534590] rtl8192cu: Tx queue select: 0x05
[ 1165.906506] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u6: link is not ready
[ 1166.922571] wlp0s29f7u6: authenticate with 2c:39:96:b3:ba:40
[ 1166.935133] wlp0s29f7u6: send auth to 2c:39:96:b3:ba:40 (try 1/3)
[ 1166.962884] wlp0s29f7u6: authenticated
[ 1166.963550] wlp0s29f7u6: associate with 2c:39:96:b3:ba:40 (try 1/3)
[ 1166.969384] wlp0s29f7u6: RX AssocResp from 2c:39:96:b3:ba:40 (capab=0x431 status=0 aid=44)
[ 1166.969418] wlp0s29f7u6: associated
[ 1166.969455] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29f7u6: link becomes ready
[ 1317.334883] wlp0s29f7u6: deauthenticating from 2c:39:96:b3:ba:40 by local choice (reason=3)
[ 1317.347568] cfg80211: Calling CRDA to update world regulatory domain
[ 1317.593153] rtl8192cu: MAC auto ON okay!
[ 1317.625922] rtl8192cu: Tx queue select: 0x05
[ 1318.002339] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u6: link is not ready
[ 1318.943694] wlp0s29f7u6: authenticate with 2c:39:96:b3:ba:40
[ 1318.959587] wlp0s29f7u6: send auth to 2c:39:96:b3:ba:40 (try 1/3)
[ 1318.961335] wlp0s29f7u6: authenticated
[ 1318.965144] wlp0s29f7u6: associate with 2c:39:96:b3:ba:40 (try 1/3)
[ 1318.988340] wlp0s29f7u6: RX AssocResp from 2c:39:96:b3:ba:40 (capab=0x431 status=0 aid=44)
[ 1318.988376] wlp0s29f7u6: associated
[ 1318.988421] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29f7u6: link becomes ready
[ 1469.086853] wlp0s29f7u6: deauthenticating from 2c:39:96:b3:ba:40 by local choice (reason=3)
[ 1469.099248] cfg80211: Calling CRDA to update world regulatory domain
[ 1469.337346] rtl8192cu: MAC auto ON okay!
[ 1469.370119] rtl8192cu: Tx queue select: 0x05
[ 1469.742158] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u6: link is not ready
[ 1470.673984] wlp0s29f7u6: authenticate with 2c:39:96:b3:ba:40
[ 1470.686540] wlp0s29f7u6: send auth to 2c:39:96:b3:ba:40 (try 1/3)
[ 1470.691410] wlp0s29f7u6: authenticated
[ 1470.693241] wlp0s29f7u6: associate with 2c:39:96:b3:ba:40 (try 1/3)
[ 1470.702651] wlp0s29f7u6: RX AssocResp from 2c:39:96:b3:ba:40 (capab=0x431 status=0 aid=44)
[ 1470.702687] wlp0s29f7u6: associated
[ 1470.702728] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29f7u6: link becomes ready
[ 1680.753182] wlp0s29f7u6: deauthenticating from 2c:39:96:b3:ba:40 by local choice (reason=3)
[ 1680.765752] cfg80211: Calling CRDA for country: GB
[ 1680.998495] rtl8192cu: MAC auto ON okay!
[ 1681.031255] rtl8192cu: Tx queue select: 0x05
[ 1681.406799] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u6: link is not ready
[ 1682.318347] wlp0s29f7u6: authenticate with 2c:39:96:b3:ba:40
[ 1682.330930] wlp0s29f7u6: send auth to 2c:39:96:b3:ba:40 (try 1/3)
[ 1682.342673] wlp0s29f7u6: authenticated
[ 1682.343689] wlp0s29f7u6: associate with 2c:39:96:b3:ba:40 (try 1/3)
[ 1682.350924] wlp0s29f7u6: RX AssocResp from 2c:39:96:b3:ba:40 (capab=0x431 status=0 aid=44)
[ 1682.350956] wlp0s29f7u6: associated
[ 1682.350994] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29f7u6: link becomes ready
[ 2206.980860] wlp0s29f7u6: deauthenticating from 2c:39:96:b3:ba:40 by local choice (reason=3)
[ 2206.993170] cfg80211: Calling CRDA to update world regulatory domain
[ 2207.227511] rtl8192cu: MAC auto ON okay!
[ 2207.260157] rtl8192cu: Tx queue select: 0x05
[ 2207.631823] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u6: link is not ready
[ 2208.565086] wlp0s29f7u6: authenticate with 2c:39:96:b3:ba:40
[ 2208.577695] wlp0s29f7u6: send auth to 2c:39:96:b3:ba:40 (try 1/3)
[ 2208.585581] wlp0s29f7u6: authenticated
[ 2208.587355] wlp0s29f7u6: associate with 2c:39:96:b3:ba:40 (try 1/3)
[ 2208.616071] wlp0s29f7u6: RX AssocResp from 2c:39:96:b3:ba:40 (capab=0x431 status=0 aid=44)
[ 2208.616112] wlp0s29f7u6: associated
[ 2208.616155] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29f7u6: link becomes ready
[ 2504.014135] wlp0s29f7u6: deauthenticating from 2c:39:96:b3:ba:40 by local choice (reason=3)
[ 2504.026462] cfg80211: Calling CRDA to update world regulatory domain
[ 2504.273688] rtl8192cu: MAC auto ON okay!
[ 2504.309828] rtl8192cu: Tx queue select: 0x05
[ 2504.702760] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u6: link is not ready
[ 2505.627571] wlp0s29f7u6: authenticate with 2c:39:96:b3:ba:40
[ 2505.640510] wlp0s29f7u6: send auth to 2c:39:96:b3:ba:40 (try 1/3)
[ 2505.649754] wlp0s29f7u6: authenticated
[ 2505.650508] wlp0s29f7u6: associate with 2c:39:96:b3:ba:40 (try 1/3)
[ 2505.680782] wlp0s29f7u6: RX AssocResp from 2c:39:96:b3:ba:40 (capab=0x431 status=0 aid=44)
[ 2505.680831] wlp0s29f7u6: associated
[ 2505.680887] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29f7u6: link becomes ready
[ 2948.553142] wlp0s29f7u6: deauthenticating from 2c:39:96:b3:ba:40 by local choice (reason=3)
[ 2948.565823] cfg80211: Calling CRDA for country: GB
[ 2948.814051] rtl8192cu: MAC auto ON okay!
[ 2948.846690] rtl8192cu: Tx queue select: 0x05
[ 2949.220485] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u6: link is not ready
[ 2950.173570] wlp0s29f7u6: authenticate with 2c:39:96:b3:ba:40
[ 2950.186113] wlp0s29f7u6: send auth to 2c:39:96:b3:ba:40 (try 1/3)
[ 2950.190241] wlp0s29f7u6: authenticated
If there is anything else I can provide that may help please ask, this has been driving me mad for days now!

Looks like a driver bug. You could try multiple things, as a start:
- switch channel
- toggle encryption
- different usb port

Connection constantly dropping

So i have BT infinity, it was alright for a while (decent speeds etc) but i'm having serious problems with my connection. It seems to drop out every hour or so which is infuriating when i'm trying to play xbox or watch a movie on netflix.
It happens regardless of wired or wireless connection (though everything bar 1 device is wireless).
Anyone else had anything similar or any suggestions?
I know it is not the devices at fault as my xbox, laptop, netbook and phone are all experiencing the issue at the same time.
If more detail is required, please let me know.
Thanks

Hi Maccathesaint
Welcome to the forum. If you are still experiencing these drops, send me an email using the contact us link in my profile and I can have them investigated for you.
You can find this link in the section 'About Me'.
Thanks
Stuart
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

WiFi Connection Constantly Drops

Similar Messages

Maybe you are looking for