Wifi connection question

hi i am about to set up a wifi connection on my 5800 express.
i obviously have a wireless network at home via laptop and pc but what i would like to know is when the phone is connected to the system am i using my service providers connection or is it my mobile phone operators connection (orange) to browse the web.
Sorry if this is a simple question but i would just like to know before i connect asi dont really want to run up a bill on my mobile for the internet.
                                            Regards
Solved!
Go to Solution.

Your phone will use whichever provider you set it to use.
If you set up the WLAN access point correctly and use that to surf the 'net then it will use that. Presumably it's your normal ISP, not your mobile operator, on the other side of the wireless router.
If you leave Orange's packet data access point at a higher priority than the WLAN (by default, packet data is lower priority than WLAN) or if you don't install the WLAN at all, then the phone will use that instead.
When you have installed the WLAN access point, use the "Options" in the connectivity settings to make "Internet" your default destination. Make sure that the various applications you use are set to connect using the "default connection" where possible (these applications will try to use the WLAN first and then fall back on packet data if your WLAN isn't available). If an application doesn't allow you to set a destination as a preferred connection then set the WLAN explicitly.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Similar Messages

  • 'another bizarre wifi connectivity question

    In the last week or two my 2-year-old MacBook has developed an odd and increasingly frustrating problem -- hoping someone has advice: When the laptop gets more than about 5 feet from the wifi router it's using (whether the one in my apartment, or the one at my sister's place, or the one at the coffeeshop) it loses the signal. In fact, it doesn't just lose it - once about 20 feet away, the MacBook can't even find the signal. Even sitting two feet from the router, as I type, it only registers 2 or 3 bars bars, not full strength...
    I'm pretty certain it's my laptop's problem, as my buddy has no problems in our apartment with his (even older) MacBook. Ditto my sister at her place. I'm a computer moron, so I've tried the basics, to fix this (turning the connection on/off, mucking with the preferences, even deleting the 'saved' networks and re-establishing them). Nothing's helping.
    I don't know that I have every bit of firmware installed that I could - for some reason the Mac sorta balks after trying to install them - but I don't know that that's the problem, at all.
    Anybody got a diagnosis/prescription? I'm a freelance writer and my computer and access to the Web are my life, so I'm increasingly aggravated and worried by this. Thanks.

    Thanks for the reply.
    Truth to tell, it SEEMS that some deterioration was happening even starting a few weeks ago, but I chalked it up to moving into a new apartment. But the truly now-it-doesn't-work-at-all started about 8 days ago, out of seemingly nowhere. I didn't do anything different that I can think of, to cause this - no deletions, nothing. After the severe problem began, I did some software upgrades I'd been putting off. But that shouldn't be the issue...
    All I've done to try to fix this, to date, is turn the airport on/off, turn computer and router on/off, and then yesterday I tried going into network and preferences and clearing the preferred wifi networks and then re-establishing those. Still, so far, I'm getting thrown off the 3 wifi networks I've tried after about 6 or 7 feet away from the router, while others with MacBooks have no problem. And they sometimes don't even "see" the wifi signal anymore. Crazy.
    I haven't tried an ethernet connection but will do so, today, when I get back to my own apt. after holidays. That would tell me if it has anything to do with the wifi signal?
    I can certainly go by an Apple store. And buy an Airport card if needed. But I don't want to drop $300 if not absolutely necessary...
    thanks for any other advice...

  • Wifi connection question - please help

    I have a Cable Internet connection connected to a Linksys SPA2102, behind the 2102 I have a Linksys wireless WRT54G Router. When I try and connect to my wifi via my iphone 3g the phone says its unable to connect. Its WEP enabled and I know my password is correct. Anyone have any ideas??
    Thanks

    Try restoring the iPad and try again.
    Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
     MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

  • I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?

    I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?

    Kowhai wrote:
    Lots of WIFI needs a username and password to get access. I guess you're lucky and yours is set up unsecured.
    Normal secured WiFi requires only a password to get access. The password is used to encrypt traffic between your device and the WiFi access point. If whatever you are using requires a username as well then it is not simply normal secured WiFi. It might be a subscription WiFi service like GOGO, ATT, etc., or a service with authentication, i.e., college campus, etc. To help you out we need to know what you are using and what connection dialog you are being presented with. You don't have exactly the same problem as the original poster. He is having a problem entering a password into the password dialog that iOS presents when one tries to connect to a normal secured WiFi network. Could you clarify exactly which WiFi service you are using.

  • I want to use wifi for Apple TV, but it doesn't prompt for a password, so never connects.  What am I missing?  Can I only use it via a non-password-protected wifi connection?

    I want to use wifi for Apple TV, but it doesn't prompt for a password, so never connects.  What am I missing?  Can I only use it via a non-password-protected wifi connection?

    Hi - you might want to post this question on the Apple TV area - you would probably get a quicker response - if you have a specific question relating to Apple routers then post back here

  • I updated my iphone and when it came time for activation it won't work and keeps telling me to try again. At the top it says "No Service" and I have my SIM card in and a good WiFi connection and have connected it through iTunes but it says I have no SIM

    I updated my iphone and when it came time for activation it won't work and keeps telling me to try again. At the top it says "No Service" and I have my SIM card in and a good WiFi connection and have connected it through iTunes but it says I have no SIM card and need to disconnect and insert my SIM. I don't understand why this keeps happening and it's been going on for a wile now. I have tried over and over again to get this iPhone to work but nothig is happening. I've even gone on the website for support (apple.com/support) but cannot find anything that will help me with this situation. Can someone please help me find a solution to this problem? I have been without a phone and do not have money to buy another one and it is crucial for me to get it fixed. Thanks.

    wesb
    What computer operating system is involved in the Premiere Elements 11 and 13 issues? Same computer or different ones? Are you installing from purchased download installation files or from purchased installation disc? Does Premiere Elements 11 work completely on this computer whereas 13 will not?
    Let us go through the typical drill so as to take nothing for granted.
    1. Does the problem exist with or without the antivirus and firewall(s) disabled? Are you working with an individual home computer or in a
    school or company network?
    2. Are you running the program as Administrator and is there any "domain" account involved?
    3. Is your video card/graphics card up to date according to the web site of the manufacturer of the card?
    4. Do you have the latest version of QuickTime installed on the computer with Premiere Elements?
    Let us start by ruling in or out any of the above, and then we can decide what next.
    Any questions or need clarification, please do not hesitate to ask.
    Thank you.
    ATR

  • TS1398 Still having problems with my ipad wifi connection since upgrading to IOS 6.  Can Apple do something about it the soonest possible time.  I don't have this kind of problem using IOS 5.1.1 Can you at least put back the 5.1.1 if you cant find a solut

    So disappointed with IOS 6.  I'm having weak wifi connection since upgrading to it.  Can Apple do something about it? Can you at least reset it to IOS 5.1.1?

    Sorry Jim for the wrong question because I'm getting frustated with my IPAD since I can't use it for surfing internet with a faster speed.  Ipad was very convenient to use until this IOS 6 upgrade.  Tried all the suggestions in the forums but still gets back to weak wifi connection.

  • Updated to 5.1 this weekend and lost wifi connectivity on iPhone 4 and Ipad 2

    This weekend I updated my iPhone 4 (AT&T) and iPad 2 (Verizon 3G, wifi) to 5.1. Since the update (went flawlessly), I have been unable to connect to wifi networks anywhere. All that I get is the continuously running circle that shows it is trying to connect (but never actually does). I have RESET all Network connections numerous times, did the 'Forget this' connection on everything, etc. They will no longer connect to places that I have always connected to (Home network, CLE Airport, Hilton, Work, etc...). I can connect to all networks fine with my laptop and blackberry, but I just get the constant connection circle with my iPhone and iPad 2. Can anyone offer any other advise?
    I have tried:
    1. Reboot (Soft)
    2. Reboot (Hard (Home and Power button)
    3. Forget WiFi connection
    4. Reset Network Connections
    5. Tried 6 different Wireless (wifi) networks that I have always been able to connect to with no luck.
    6. Airplane Mode with wifi on...
    7. Turned 3G off...
    Desperately awaiting some assistance, I do not have cell connections in our facilities or the hotel, so basically have a useless device right now!

    I have the same problem with my Ipad 2 16gb WiFi, I bought it in US on march (I don´t live in US) I returned to my country and updated the IOS to 5.1.
    One week ago the wifi signal dissapeared, I get the continuously running circle that shows it is trying to connect too.
    I tried to reset it, to restart it, I even erase all content and settings but the problem continues.
    As you can imagine an Ipad without internet connection is useless, I have opened a case in Apple Technical Support.
    All I want to do is to return it
    The question is if It will be possible to replace it or change it by other apple product. I will go to US again next month.

  • My Iphone 4S no longer works it's wifi connection as well as the share internet option

    My iPhone 4S no longer works it's wifi connection nor it's internet share option

    That's unfortunate.
    Do you have a question?

  • HP Slate 21 Pro: WiFi connection issues

    Hi,
    I recently ordered two HP Slate 21 Pro devices. Unfortunately, both of them have WiFi connection issues. After some time the properly configured WiFi connection will be dropped, which results in connectionless devices. The WiFi AP is disabled after this, and so a timed reconnect will not succeed.
    After inspecting the Logcat I found following lines:
    12-05 08:56:58.939 V/EthernetStateTracker(675): report interface is up for eth0
    12-05 08:56:58.939 I/EthernetStateTracker(675): interface up event, kick off connection request
    12-05 08:56:58.939 I/EthernetStateTracker(675): interface up but ethernet is disabled, stop this interface
    12-05 08:56:58.939 I/EthernetStateTracker(675): stop dhcp and interface
    12-05 08:56:58.947 V/EthernetStateTracker(675): report interface is up for eth0
    12-05 08:56:58.948 I/EthernetStateTracker(675): interface up event, kick off connection request
    12-05 08:56:58.948 I/EthernetStateTracker(675): interface up but ethernet is disabled, stop this interface
    12-05 08:56:58.954 I/EthernetStateTracker(675): report new state DISCONNECTED on dev eth0
    12-05 08:56:58.954 V/EthernetStateTracker(675): update network state tracker
    12-05 08:56:58.954 V/EthernetStateTracker(675): Ethernet is disabled, ignore state change event
    12-05 08:56:59.080 D/ConnectivityService(675): ConnectivityChange for WIFI: DISCONNECTED/DISCONNECTED
    12-05 08:56:59.080 D/ConnectivityService(675): Attempting to switch to BLUETOOTH_TETHER
    12-05 08:56:59.080 V/EthernetStateTracker(675): reconnect +++
    12-05 08:56:59.080 D/ConnectivityService(675): Attempting to switch to ETHERNET
    12-05 08:56:59.094 D/ConnectivityService(675): resetConnections(wlan0, 3)
    12-05 08:56:59.201 I/EthernetStateTracker(675): stop dhcp and interface
    12-05 08:56:59.208 D/Nat464Xlat(675): requiresClat: netType=1, hasIPv4Address=false
    12-05 08:56:59.208 D/ConnectivityService(675): handleInetConditionChange: no active default network - ignore
     Especially this line:
    12-05 08:56:59.080 D/ConnectivityService(675): ConnectivityChange for WIFI: DISCONNECTED/DISCONNECTED
    Is this issue already known? Has someone a solution for me?
    Thanks in advance,
    Christian

    That really shouldn't affect it.
    I'm a little stumped because I haven't seen this issue with this device before. The only similar issue I found was this, and it's unresolved.
    Have you tried doing a hard reboot of the Slate 21? 
    I work on behalf of HP (But this isn't my job)
    Mark my post as “Accept as Solution" if you feel my post solved your issue, so that others with the same question can find the answer.
    Please give me Kudos if I wrote something that helped you.

  • Cant WiFi connect HP Officejet Pro 8600 e-All-in-One Printer to internet

    I cant WiFi connect HP Officejet Pro 8600 e-All-in-One Printer to internet... at least I think that is the problem. I have followed all the instructions on HP Print and Scan Doctor as well as Troubleshoot HP Installation Failure. My router is running fine for everything else and I have entered the static address for the printer into the router.  It appears that my printer believes it is connected to my WiFi (Ihave WPS it multiple times), but when I type it's IP address into my IE nothing shows up. My router doesn't appear to see the printer either. I have the latest driver installed on my computer. I suspect this may be a router issue: new router Asus Double 450 Mbps  N Router (Dual band - but it appears my router is using the 2.4Hz band to communicate with WPS). Windows 7 64. 
    Any help is appreciated!
    This question was solved.
    View Solution.

    Hello NRHII,
    Welcome to the HP Forums!
    I understand you're unable to connect the Officejet 8600 over a wireless connection. I will do my best to assist you! I would recommend power cycling the router, printer and computer:
    1) Turn off your printer
    2) Disconnect the power cord from the back of the router
    3) Restart your computer
    4) Wait less than 60 seconds, plug the power cord back into the router
    5) Turn your printer back on, wait for the computer to turn on
    Is the wireless light blinking on your printer? If so, please reconnect the wireless on your printer by using the wireless setup wizard: (This information is stated here.)
    On the printer touch screen, touch the Right Arrow ( ) to display the second navigation screen.
    Touch the Setup icon ( ).
    Touch Network , touch Wireless Setup Wizard , and then touch Continue . The printer searches for available networks.
    Touch the name of your network, and then touch OK .
    If prompted, enter the network password, and then touch OK . The printer connects to the network.
    Also, as I was typing this post TreeFrog posted some great information to follow.
    Have you followed this entire HP document on Printer Does Not Maintain Wireless Connection? If not, follow this document. Please post your results, as I will be looking forward to hearing from you.
    Have a great day!
    I worked on behalf of HP.

  • Windows 7 desktop drops WIFI connection

    Hi -
    I seem to see a lot of posts with this same problem, but no solution that's relevant to me.  I have a DLink DIR 655 router that has the latest firmware installed (I updated it yesterday). One of the machines on my wireless network is having problems. 
    Two Microsoft Surfaces, three Windows phones, and one Canon WIFI printer all work fine, its only a desktop that uses a USB Wireless card that has the problem.  I am currently using a Medialink MWNUSB150N wireless card.  Note, however, that I had
    exactly the same problems with a DLink wireless card.
    The problem is that the WIFI connection drops frequently.  The systray will indicate that I am connected to the wireless network with internet access.  Then I will notice that web pages are not loading, but it will still show that I am connected
    to the WIFI network and the internet.  After a short time, the systray will show that I am connected to the network, but have no internet access.  After some more time it will show that I am not connected, but will usually show that connections
    are available.  When I try to reconnect (my SSID shows as available at this point), then I get an error saying no network is available.  At this point, my SSID no longer shows as available.  I've run the troubleshooter probably 100 times over
    the course of several months.  It never helps.  Rebooting sometimes helps.  Sometimes it seems like I need to do a voo doo dance to get the connection back.  Following is the result of running netsh wlan show driver.
    Any ideas?
    Microsoft Windows [Version 6.1.7601]
    Copyright (c) 2009 Microsoft Corporation.  All rights reserved.
    C:\Users\Dennis>netsh wlan show driver
    Interface name: Wireless Network Connection
        Driver                    : 802.11 USB Wireless LAN Card
        Vendor                    : Ralink Technology, Corp.
        Provider                  : Microsoft
        Date                      : 2/26/2009
        Version                   : 3.0.0.61
        INF file                  : C:\Windows\INF\netr28ux.inf
        Files                     : 2 total
                                    C:\Windows\system32\DRIVERS\netr28ux.sys
                                    C:\Windows\system32\drivers\vwifibus.sys
        Type                      : Native Wi-Fi Driver
        Radio types supported     : 802.11b 802.11g 802.11n
        FIPS 140-2 mode supported : Yes
        Hosted network supported  : Yes
        Authentication and cipher supported in infrastructure mode:
                                    Open           
    None
                                    Open           
    WEP-40bit
                                    Open           
    WEP-104bit
                                    Open           
    WEP
                                    Shared          WEP-40bit
                                    Shared          WEP-104bit
                                    Shared          WEP
                                    WPA-Enterprise  TKIP
                                    WPA-Enterprise  CCMP
                                    WPA-Personal    TKIP
                                    WPA-Personal    CCMP
                                    WPA2-Enterprise TKIP
                                    WPA2-Enterprise CCMP
                                    WPA2-Personal   TKIP
                                    WPA2-Personal   CCMP
        Authentication and cipher supported in ad-hoc mode:
                                    Open           
    None
                                    Open           
    WEP-40bit
                                    Open           
    WEP-104bit
                                    Open           
    WEP
                                    WPA2-Personal   CCMP

    Thanks Cody! 
    Questions: 
    Regarding your advice to check the wireless security settings - I don't know exactly what to do.  I went into the router admin page and checked the wireless security - its set to "WPA-Personal". Other than that, I don't know how to tell if
    its using TKIP or not.
    The next time it fails, I will try your suggestion to remove the network and reconnect.  I can't remember if I tried that at some point, so I'll give it a shot.  I'm waiting for it to fail right now as I tried something yesterday that I think has
    a low chance of success, and it hasn't failed yet.  I noticed that the option to "allow Windows to turn off this device to save power" was checked for the wireless adapter, so I unchecked that value.  I only think it has a low chance of
    success, since the timing of the shutdowns was pretty random and did not "smell" like a power saving thing, but thus far it hasn't failed.  I'm still within the window of randomness, though.  Sometimes it works for a little over a day and
    sometimes it fails after less than 5 minutes, so I'm just keeping my fingers crossed for the moment.
    Comments:
    Tried using different USB ports, USB 2.0 and USB 3.0, and front panel vs. real panel just in case there was anything weird going on.  No difference.
    Updated the driver using the "update driver" button.  Windows believes I have the best driver installed. I did look for other versions, didn't find anything.
    Dennis

  • Wifi connection

    hi all,
    i am not sure if this is just me being a fool or something with phone. i can connect to my home wifi network ok and also the free wifi services in mcdonlads with out any problem but if i find a wifi network with out the little lock symbol next to it and try and connect it wont let me. is there a reason for this?

    Anne,
    welcome to the Apple discussions.
    (It would probably be better if you'd opened a new thread for your question because the original question is marked as answered.)
    The password you're asked for is most likely the password that was used to secure your wifi connection (WEP (*not recommended*), WAP or WAP2).
    Check the settings for "Wireless Password" on the "Wireless" tab in AirPort Utility.

  • I just wanna know if it is necessary to have a wifi connection to stream from Ipad to apple tv?

    I just wanna know if it is necessary to have a wifi connection to stream from Ipad to apple tv? I mean I just want to use it for streaming

    If you only want the free apps, take a look here:
    http://support.apple.com/kb/HT2534
    Read the steps carefully as the order in which you follow them is  critical. Note that you can do this only when creating a new Apple ID. You cannot use an existing ID. 
    You will of course not be able to get anything other than the free apps without entering in some sort of payment method (credit card, prepaid iTunes card, gift certificate, etc.)
    Regards.
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

  • Nokia Lumia 521 - WiFi connected, but no internet ...

    I have a brand new Lumia 521 on T-Mobile. I set up the wifi connection and it shows connected. However, there is no internet connection. Cannot download any app or anything.
    Trouble Shooting: Rebooted the phone couple of times. Turned on/off wifi. delete/re-connect wifi.
    Reboot wireless router couple of times.
    Turned off the data service on my phone and only wifi is on now. Checked my router that there is an entery for my Windows Phone, but could not get any logs.
    Nothing helped so far...
    Loaded my sim with funds, thinking if something no fund is blocking it somewhere :-D
    Everything is fine on my other smartphones.
    Did I receive a faulty device?
    Solved!
    Go to Solution.

    At least you have 8.1. Those of us with 521 not updated yet, no real answers. Someone at Nokia going to close thread cuz no one posting. What to post, you should've been a politician with the no answer answer. Whole experience makes me rethink Microsoft and Nokia altogether. Both companies I used to believe in and support. Even word and excel don't sync well from phone to desktop. Backup for what? Only if you reset phone. That is backup even DOS using command lines would have been ashamed of (honestly so long ago don't remember if it had backup but I know my 386SX did) Pictures duplicate, triplicate and repopulate after deleted and I have backup to cloud turned off. seems Microsoft thinks differently than I about this issue? It continues to bring back a pic of EX that i hate...Great reminder!!!!. Phone storage eaten and not accessible to delete. Not allowed to delete certain apps that came with phone. Now I delete apps I prefer and no space becomes available? Do not use Nokia cinemagraph. Can't be viewed anywhere but on phone without converting. And what phone/camera has no flash? My parents old 110 (I think) at least had a cube. Poloroid built in...just saying that was the early 80s. Now lock screen and theme (ugly muted colors, btw) not working, can't get space back even when hooked to desktop, use cloud 6 now to keep phone and cloud from changing between app and desktop, have to convert all Nokia files, and most apps not available from what I can gather because Microsoft limits us. Nokia and Microsoft, get your acts together before marketing with one another. And, have answers to these questions. If you can't do it right, don't do it all. Maybe best to walk away from one another. Although, other than poor apps and flimsy phone, I am more disappointed in a guru conglomerate that doesn't care about the user. You keep trying to catch up with Mac and Droid...not at this rate. Excel fave program to use and love outlook. But this is crap on a stick, SOS and plain junk. And, the mighty do fall. I remember original Apple having market, commodore 64 and Tandy? Two of the three no longer exist. IBM was a typewriter back then, as far as I was aware. For Nokia, Here doesn't usually get me to correct place with full addy and zip entered) Not a good platform or flimsy phone. Can't wait to go back to Droid....so, I suggest every time I can't find an answer from one of your sites, you stop asking what I think. Here it is. And, I could keep going and going....atop asking if you don't give a hoot.. and, I'm sure this will never be posted cuz Microsoft determines what I can and can't do with this thing

Maybe you are looking for