Wifi connectivity issues with windows 10

I am unable to connect to my Wifi network following upgrade to windows 10

I would look into updating the firmware of the wifi router solves problems for many people

Similar Messages

I have Snow Leopard 10.6.8 on my MacBook. Constantly dropping internet connection or message "error connecting to the network" comes up. No wireless connectivity issues with windows 7 laptop or iphone.

I have a MacBook with Snow Leopard 10.6.8. The last few weeks it has been constantly dropping internet connection, and one of these messages appear on the page: "Safari cannot open this page because the server where this page is located isn't responding" or "Safari cannot open this page because you are not connected to the internet" comes up. I will check Wifi and I am connected. No wifi connectivity issues with iphone or windows 7 laptop, this doesn't happen with either of those devices. I have unplugged and reset router, cleared cache, still happening. Any ideas? Thanks in advance.

Hi BCLor!
Try using the suggested steps in the following article to help you troubleshoot this issue with your Wi-Fi connection:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

TS1398 Has anyone had WiFi connectivity issues with their iPhone 5 after accepting the latest IOS 8.0.2?

Has anyone had WiFi connectivity issues at home with their iPhone 5 after accepting the recent IOS 8.0.2 update?

Yes, despite being it an iPhone5 (8.0.2) attempting to connect to an Airport Express.
In my case the iPhone "connects" to Airport Express 2nd generation, but no Internet packages are available; Airport Utility shows the Airport Express as not connected to the Internet; but the iMac, MBP, Motorola phone, Samsung Smart TV and HP printer connect without any trouble.
The actual issue is the DHCP :
sometimes the iPhone gets none, and
when an address is assigned it just doesn't work,
even renewing the address won't work all the times,
switching off and on the WiFi won't work all the times neither,
going on Airplane mode, then back won't work all the times.
Solutions attempted and failed:
Reseting and reconfiguring Airport Express;
Reseting iPhone;
Switching off and on the iPhone;
Setup the DHCP renewal for every 5 days;
Meditation and stark visualisation;
Other possible patch not yet attempted : setting fixed IP addresses
All suggestions received resemble Windows' "Plug & Pray"
I gave up after reading several notes around the WWW complaining about it.
Last credible suggestion : wait for 8.0.3 or 8.1, whichever fixes the issue first.

Adobe Connect issues with Windows 7

Has anyone found a solution to the problems Adobe Connect has with Windows 7?

Sounds like something is blocking network traffic. I'm not aware of any Windows 7 specific issues. I've used Windows 7 with connect for 2 years with no Windows specific issues.
I'd call support at 800-945-9120 and see if they can indentify the issue and give you a resolution.

Anyone else having repeated wifi connectivity issues with the OSX version 10.8.5?

I just updated the software on my iMac to OS X version 10.8.5. Now I am having repeated connectivity issues with the wifi in my house. This is the only device that is having these issues. My phone, ipad and tv are not having any problems at all.
It happened immediately following the update. I was sending emails and browsing before the update without a problem.
from apple:

I had a message like that last week - only it asked what browser I would be using - I just quit safari - purges caches etc - and at that time noticed I was getting RSS feeds through PUBSUB - tracking them down to the top sites view I never use - I deleted all of the top sites (most of which I don't go into so it must have been a preset) that included MSN and Google - I don't use google so that was pointless. (deleting a top site means you are blocking it from that page) Have not had the message since so it must have had something to do with top sites activity.
Just a note: Did see somewhere probably BBC tech - that Google was going to stop supporting older web browsers.

SSLVPN connectivity issue with Windows 7 x64 All browsers.

I think that I have tried everything to get this working but whatever I seem to do I cannot connect to my SSLVPN using Windows 7 x64. The 32bit version is fine. I have installed the Microsoft C++ Redistributable 2010 and 2005 for both x86 and x64. I have tried clearing the cache in the Browser. I have installed Chrome and Firefox , I even started my laptop using the 'Disable Driver Signature Enforcement' from Advanced Boot options but nothing is working.
Does anyone have anything else to try. This is a bit of a showstopper for us because not do we have this issue with Windows but we have Mac users as well and that is also an issue.
Cisco really needs to fix this issue fast...
Please help.
Thanks
Mark Sheehan

Try using both the 32-bit and 64-bit versions of Internet Explorer. Sometimes one of the two will work.

Lumia 820 connection issue with Windows 7

Hi there, I'm hoping someone can help me. Up until about 2 weeks ago I could connect my Lumia 820 directly to my PC (running Windows 7) without the windows phone app. Windows would detect the phone as an external drive and it would appear in Windows explorer. Since after the new year (I uploaded music to the phone for NYE successfully), there is a connection issue. Windows sees the phone in 'Devices and Printers' but not in Windows Explorer. I downloaded the windows phone app and this doesn't connect. Windows 7 is fully updated, including the new service pack.
I have attached a screen grab to illustrate my issue. Any help would be greatly appreciated.
Attachments:
lumia-connect-issue.jpg ‏204 KB

Sorted. It was a case of turning the phone off and on again. *sigh*, bloody billyware **bleep**!

Airport Extreme 802.11n connectivity issues with Windows Vista

I recently purchased the 802.11n airport exterme base station and set it up using my MacBook Pro laptop. During the configuration process I set the security to be WEP enabled since there are other computers on my network, one of which has only an 802.11b wifi card, that can only accept WEP security protocol. The set up worked great and I was surfing on the internet with my Mac in no time.
When I go to connect to the 802.11n extreme base station with my Windows Vista desktop PC, I cannot get any type of connection. I re-entered the Network SSID to match that on the AE base station and re-entered the WEP enabled password.
Is there a compatibility issue between the Airport Extreme Base Station and Windows Vista? I realize that the base station works on XP based PCs but not sure why it could not work on a Vista machine. Any help anyone can offer would be greatly appreciated.
MacBook Pro Mac OS X (10.4.6) 1.83Ghz Intel Core Duo

Upon further review I determined the flaw with my earlier attempts to set up the airport exterme base station with my winodws vista desktop pc. I realized that I should not use a WEP key but rather a WPA key since the wireless adpater connected to my desktop is a wireless G enabled adapter that can handles WPA and WPA2 security.
Therefore, no issues with Vista and the airport extreme base station. Works great.
MacBook Pro Mac OS X (10.4.6) 1.83Ghz Intel Core Duo

Wifi connection issue with mini Ipad

Hi,
Problem with the new mini ipad. wifi connection is fine but when accesssing online streaming TV sites, it is constantly disconnect itself and have to reconnect to the site before I coujld stream it again.
I have other devices connected to the same router fine without any issue.
Ipad works fine with the same site and connection
laptops work fine.
iphones work fine
only the mini ipad is not.
took to Genius bar, nothing much was done. Called support line, waited hrs for someone to tell me to make apt with Genius bar.
This has becoming very annoying and disappoiting with Apple products since Steve J is gone.
any help is greatly appreciate it.
Regards,

Try #5.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

HP Photosmart D110 connectivity issue with Windows 8.1

Month back, i have upgraded my Dell inspiron to windows 8.1 and from that time onwards i am facing issues with connectiveity to HP photosmart D110 printer over my wireless network.
I installed the printer driver, once it is installed fine. i can see the printer, take out few prints. Then i shutdown my laptop. Next time i reboot. I launched HP Solution Center and turned on my printer. It showed up problem with with HP solution center saying " HP Solution Center can not run becuase your device installation is not complete" i have to the printer and devices setting on control panel i could see the printer but it is offline. I checked my connections with the printer. also ran the wireless network test. Everything comes fine.
To resolve the problem, i thought may be let me re-install. I finished reinstalling and then it worked fine. But every restart i faced the problem. I add the add the same printer again and again everytime using installation and reinstallation. This sucked. I googled and downloaded HP doctor software. That fixed the problem so far and i had to run the doctor connect the printer everytime.
Now even HP doctor is not working, it list all the multiple installation of the same printer and none of them gets connected. This is getting little crazy for me.
I need some advice, I appreicate your help in looking into it. If someone has some suggestion to deal with Windows 8.1 and have faced similar problem or can suggest some solution. I will be greatful.
Thanks,
AKS309

Hi,
When using "beta" version of any software (even with NEW full software), users have to accept the risk of some hardware do not proper functioning. Many HP test guys/girls may face this similar problem in their test lab(s), they may be able to find a solution OR push it back to Microsoft to fix the problem, therefore users (you and me) have to wait.
I woul remove/unistall its driver then start from beginning.
Hope this makes sense.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Xbox WiFi Connection Issue with Xfinity Router DPC3941T

Hello, I am unable to connect my Xbox 360 (slim) to our Xfinity modelm/router model DPC3941T. The SSID for each band (2.5ghz and 5.0ghz) is enabled, however, the xbox console is unable to detect. I have tried the following:-resetting network settings on the xbox console-restart modem-configure manual wifi network (trying each band) but get an error unable to connect to network I have spent some time scanning through these forums and others via Google search, but I only see many older posts related to different model routers. Is anyone familiar with this wi-fi connection issue using an xbox 360 and DPC3941T? Please assist thank you!

Hello, I am unable to connect my Xbox 360 (slim) to our Xfinity modelm/router model DPC3941T. The SSID for each band (2.5ghz and 5.0ghz) is enabled, however, the xbox console is unable to detect. I have tried the following:-resetting network settings on the xbox console-restart modem-configure manual wifi network (trying each band) but get an error unable to connect to network I have spent some time scanning through these forums and others via Google search, but I only see many older posts related to different model routers. Is anyone familiar with this wi-fi connection issue using an xbox 360 and DPC3941T? Please assist thank you!

Wifi Connectivity issues with a 2008 Apple Macbook

Hi I have had BT Total Broadband for 14 months with constant issues in relation to the Wifi connectivity on my Apple Macbook. I got Infinity installed and am still having the same issues. Other devices - Iphone and Ipad - work fine but the Macbook only works in one room of my house. I have had the Macbook checked and there are now issues technically with it according to the diagnostic team at the Apple store. I have tried changing channels and nothing like this is helping. BT are insisting I have to pay a cancellation charge of £159 to cancel my Infinity - even though it was only installed on Friday.
The engineer installed the modem and BT Homehub 3.0 router at my main socket into the house which is in an understairs cupboard - the modem and hub are now sitting on the floor!!!! I have been advised that this won't be helping the signal. As soon as I move from the living room to another room downstairs it drops and doesn't work at all upstairs.
I don't feel that there is any point in investing in an Airport Extreme as I have no guarantee that this will improve the level of service provided by BT.
I have also over the weekend tried different wifi networks outside of my house and it works fine on all of these including what is meant to be a less superior Sky Broadband service?
Does anyone have any ideas what else I can try - I have lodged a complaint with BT and am waiting on a repsonse at the moment.
thanks

Hi,
Long time Mac/Infinity user here.
Macs rarely have problems with their wifi, any problems that do occur are more often due to external issues, such as poor siting of the router, or co-channel interference from a neighbouring router. From your testing at the Apple Store and on other networks there is nothing obviously wrong with your machine.
Having the HH3 on the floor is just about the worst place you can site it. Generally you should position a wireless router as high up in the working area as possible; at least desk height is desirable. A very simple thing to try is borrow a longer Ethernet cable to go between the OpenReach Modem and the HH3 and then temporarily position the HH3 higher, say halfway up the stairs. There should be an immediate and noticeable improvement in the signal.
If matters do not improve, make sure that all the Apple Software Updates have been done (connect the MacBook with an Ethernet cable to do this if necessary). Next, completely delete the wireless setup on the Macbook for the HH3 (and any other old setups you may have) and complete the setup of the HH3 from scratch.
You may still find there is a lack of signal and this could be due to co-channel interference with another wifi router in your neighbourhood. Try manually switching the router onto Channel 13 as relatively few ISP's devices use this channel by default. Alternatively try Channel 1.
You can download a free WiFi "sniffer" called Kismac to check what channels are being used by other routers in your area.
To manage the hub, launch your browser of choice and enter 192.168.1.254 (DO NOT put http:// in front of this!) and press Enter. (The Hub Manager software is a PIA and should not be installed; use the CD as a coaster for your coffee cup!).
The Airport Extreme is a very good replacement for the HH3 and is far superior in terms of the WiFi signal. If you want to try one, order it on-line from the Apple Store . . . you can return it if it does not work as expected!

Wifi connection issues with Home Hub 5

Hi can any body help because I am starting to get very frustrated with the Home Hub 5 and it's wireless connection.
infinity 2 was installed at my house in the beginning of September, everything worked Ok for three weeks then for no apparent reason the hub kicked out all of my wireless devices (phones, kids iPods, tablets etc) at 6:45 one morning. When I got home from work I rang BT and was told to perform a Pin reset. This seemed to work but less tham 48 hours later at exactly the same time in the morning the hub kicked out all of my devices again, this time I just pressed the restart button on the top of the hub and everything reconnected but the Wifi range within my house had dropped. A few days later the hub kicked all my devices out again (each time it has done this the light on the hub has remained blue showing it is supposedly working OK)
One evening this week the hub of its own accord cycled through all the colours of lights indicating problems and that it was restarting. Today at 10:15 the hub kicked all my Wifi devices out again. I have contacted BT every time this has happened and told them about the poor range of the Wifi signal.
I do not want to be restarting/resetting my Hub every couple of weeks i need a permanent solution.
One of the reasons I switched from TalkTalk to BT when fibre became available was the fact that the Home Hub 5 was supposed to be the best provided router by any of the networks, being the only one that is an AC class router. The thing costs £130 if you want to by one. Quite frankly the £60 TP-Link dual band router I bought when I was with TalkTalk had a better range and was more stable. I would switch back to that if I knew BT's router settings (but they like to keep that a secret)
I really am beginning to regret switching from TalkTalk. Please someone restore my faith in BT.
Sorry for the lengthy rant but I hope you can understand why I've ranted for so long.
Nick

Hi imjolly
Sorry its taken a while to reply to your post.
I wanted to try BT's latest attempt at a solution before i tried your idea.
Since your reply the Home Hub 5 has dropped the Wifi connection to my devices another three times.
The second time less than 30hours after BT's so called fix, which was to make sure the 5Ghz channel was not syncing with the 2.4Ghz channel. Tonight it went again and BT's response was to take the router out of smart channel selection and manually select channel 9,6 or 11 on 2.4Ghz and 36,40,44 or 48 on 5Ghz. Well I havent even bothered with that, if the prats at BT would look at their records they would see they have already suggested that.
This HH5 is the most unreliable piece of garbage i have ever had the misfortune to use. WHY OH WHY did I leave TalkTalk
I have tonight tried your solution. Fingers crossed that this works.
Nick

Wifi Sync issue with Windows 7 64bit

Hi, having an issue with wifi sync for some reason. I am running Win 7 64bit, and I have tried everything on these forums with not luck. It is not my router because it works on another computer with no problem. I have enabled all ports, syncserver, etc. and nothing is working. I have done a complete uninstall, registry clean, and reinstall with no luck. I have noticed though on my computer when I check the box to allow my wifi sync to be enabled, all the box says is "Sync with this Iphone over....." It does not say "sync with this Iphone over wifi". The other computer I tried wifi sync with that worked said "sync with this Iphone over Wifi" Any thoughts on what would cause my itunes to not display the full message? I am using Itunes 10.6

I don't like using wifi sync at all. Even with my iMac often does not detect my iPhone or my iPad when they both have Wifi turned on all the time. Even when it does work the sync speed is pretty horrendous. Anyways I'd recommend physically plugging it in whenever you can. Save you some time and trouble.

E1200 router connectivity issue with windows 7 computer from sleep state over night

recently purchased the e1200 and setup was a breeze but I'm having difficulty with the primary computer (windows 7) connected to it, by wire, haven't used any wireless yet. When the computer is put to sleep through the night, I have to restart the computer the next morning to get a signal but works fine if put to sleep during the day and awakened the same day to use the connection. Have a second computer wired directly to the modem with vista that doesn't have this issue. any thoughts out there. thanks

Try this. Go to Control Panel>Click on Network and Sharing Center or Network and Internet and then Network and Sharing Center>Click on Change Adapter settings>Right Click on Local Area Connection (the adapter being used for the wired connection)>Click on Properties>Click in Configure>Go to the Power Management tab>Uncheck "Allow the computer to turn off the device to save power"

Wifi connectivity issues with windows 10

Similar Messages

Maybe you are looking for