WiFi detecting problem

I updated my ipod touch 5g to IOS 7, i don't know why it feels like the biggest mistake of my life.
These re the following problems i am facing:-
1 (the major problem) ipod cannot detect wifi while my iphone 5 & ipad 3 is detecting it
2 the year is gone to 1970 as well as the time
3 too much hanging
4 security bypass problem
if there are no solutions to these followinng problems especially wifi one then tell me how to reverse to ios 6.1.3
Message was edited by: ammartheonlyhandsome

1-  wifi:
If not this problem
See:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Then
Does the iOS device see/connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:                 
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
2- Go to settings>General>International and make sure that calendar is set to Gregorian. Then go to Settings>General Date & Time and make sure that it is correct, including time zone.
3- Restore from backup. If still problem restore to factory settings/new iPod
4- I do not know what yo are talking about.

Similar Messages

  • HT1695 wifi connection problems

    My ipod cannot detect my wifi. I have a ipad and another ipod both are connected to the wifi no problem, I have tried turning off and on , resetting the network connections, manually entering the details but none of these solutions work.

    I had this problem with my iPhone 4S and I tied everything, even two restores.  The new iOS burned out the wifi thing.  I had to get a replacement phone from my nearest Apple store.  My phone is still in warranty, but if yours is not, you have to pay the price you bought it for.  I bought my iPhone 4S when it first came out so I would have to pay $199 for my 16GB.  If you do end up bringing it to an Apple store,  make sure your stuff is backed up to iCloud! I made the mistake of only backing it up to my computer and then when I got there, the guy advised me not to restore from the old update because of corrupt data.
    if you need a quick fix before getting it checked out, you can take it out of the case and stick it in the freezer for a couple of minutes.  As soon as the phone heats up, the wifi grays out again.
    Hope this helped!

  • Has the 'No WiFi detection' issue ever been resolved?

    I have just bought my first iphone (3G) from a friend having been a Blackberry man for some years.  Having restored the phone to factory settings it quickly became apparent that the WiFi detection was not working.  No problem I thought, there are a million different forums on line, all full of useful information and with Apple being such an enormous outfit they certainly won't leave any issues unresolved.  I was correct on one assumption, there are plenty of forums, however the issue does not appear to have been solved?  In a last desperate attempt at gaining some clarity I am trying this one........  please restore my faith.
    1.  I have reset network settings.
    The WiFi is serving several other machines perfectly well and is in good health.
    Thanks in advance

    Never heard of it myself but I performed the same search you did. I don't htink it was ever resolved because it's not really a problem. It spans several apps and different OS and hardware configurations which, to me, suggests the erro that is coming up is meaningless, like so many crash indicators.
    Best suggestion I found was from David S., empty the FCP caches.
    bogiesan

  • I need help with an email WiFi sending problem on my iPad 2

    I’m having an email WiFi sending problem on my iPad 2     Model:  MC774C/A;  IOS VERSION: 6.1.3 (10B329). 
    While I use 4 email accounts on the iPad -- Hotmail, Gmail, iCloud and ns.sympatico.ca ( a division of BellAliant) – the sending difficulty only relates to the ns.sympatico.ca.  The settings for this account are:         pop.bellaliant.net            and      smtp.bellaliant.net
    I first noticed the problem about 3 weeks ago while travelling across the country (Canada).  (I do recall about that time there was an update of my IOS and I also for my wife purchased from the Bell store an iPhone which shares my Apple account.)  Prior to that everything worked well for a couple of years.
    I noticed earlier this month that the iPad received mail fine but would not send at night using the motels’ WiFi.  During the day, using my 3G account, all worked fine.  I phoned Bell but was told that my experience was normal so I thought no more about it until I returned home and found the same problem at the house.  I called Bell again and worked for 2 hours with 3 Bell technicians who succeeded in getting the iPad to neither send nor receive and gave up advising me to take the iPad into a Bell store to have it looked at.  I did that and the young technician got the iPad sending and receiving by changing the        smtp.bellaliant.net      to         mail.1xbell.ca
    However, when I returned home again, I realized that it was working on my 3G and still doesn’t send on my WiFi
    I’m looking for any suggestions that might solve this annoying problem?

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say "Cannot Connect to Server"?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
    http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

  • ITunes 11 wifi sync problem

    Hi all,
    I just update to iTunes 11, but since than I'm only able to sync my iPad and iPhone with a cable, the wifi sync option is not working. Both of my iDevices won't find my MacBook
    Info:
    iPad Wifi 3rd Gen
    iPhone 5
    MacBook Pro 15" (mid 2011)
    Hope that anyone has a solution or Apple comes up with a solution

    My itunes wasnt recognizing either my or my husbands phones via wifi either, I took the suggestion of others and reconnected to wifi, didnt work. What ended up working for me was going into network preferences on the mac, and than advanced and deleting my network from the list of preferred networks, turning on wifi on my mac, quitting itunes, turning wifi on my mac back on, reconnecting to my network and opening up itunes. Just synced a song to my iphone via wifi no problem. Odd workaround but hopefully that helps you. I am running osx 10.8.2 and my phones are on ios 6.0.1

  • WiFi (WLAN) problem - in the same room a iOS 5 device connects, iOS 6 not

    Hi all,
    I won't say that it's a proof for the iOS 6 WiFi/WLAN problem. BUT, it's evident that my iPhone 4 with iOS 5 sees all WLAN-networks and connects - my new iPad with iOS 6 doesn't! And I'm using the two devices in the same room. In addition my new iPad didn't have connection problems before updating to iOS 6.
    Apple Software Engineers - please help and release the next update to fix it
    Best regards
    O.

    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting
    http://www.apple.com/support/ipad/wifi/
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Has anyone had a problem with TapMedia File Manage on iPhone 5. I reported a WIFI functionality problem to the developer and asked for support. Instead they have been very unprofessional by name calling me instead of logically evaluate and troubleshoot th

    Has anyone had a problem with TapMedia File Manage installed on iPhone 5? I reported a WIFI functionality problem to the developer and asked for support. Instead the company has been very unprofessional by name calling me instead of logically evaluate and troubleshoot the problem

    Hi AKE1919,
    Welcome to the Support Communities!
    The following information should help you with this:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    http://support.apple.com/kb/HT1933?viewlocale=en_US
    Cheers,
    Judy

  • New retina MacBook Pro - WiFi connectivity problems

    Dear all,
    I've recently purchased the new Haswell 13" retina MBP, and I'm having exactly the same WiFi connectivity problems the 2013 Airs had. I have a solid connection for a short time, and at irregular intervals it just drops out. All of my other devices are still connected and have no problems. I've tried with two different routers/modems, but the problem persists.
    Is this a known problem - with hopefully a software fix in the forseeable future, or do I need to return the MacBook?
    Many thanks in advance for your help,
    Nic

    I haven't got a Retina, but I do have the same wifi problem. And if you've looked at these forums, you'll see it's been going on for years and no one seems to have a handle on what the issue is. All I can say is if I were in your place I'd take it back and exchange it. You have the chance now, so take it.

  • IPad WiFi Connection Problems - WiFi Symbol Appears With Full Bars but I Don't Get A Checkmark?

    I was using the iPad one day and then all of a sudden it stopped connecting to the internet. The network at this hotel is very good and I've asked them about their router so it is not the router's problem.
    I go to the Settings and tap on Wi-Fi then I tap on the hotel network. After a few seconds, it says the network name beside the Wi-Fi tab and it gives me the WiFi symbol showing 3 bars. But then I never get the checkmark or tick saying everything is connected. I try going online and it says the iPad is not connected to the internet. I've tried an iPhone and it connected and got a checkmark in a few seconds. I've talked to the front desk and he took out his phone and showed me that he could connect, he even opened a page without any problems at all.
    I've been trying to find a solution for this for a long time. I've been searching Google over and over again. I turned Airplane Mode on for 1 minute, I've tried Resetting my Network settings, I've tried forgetting the network and reconnecting again, I've tried removing all restrictions from the iPad, I've rebooted the iPad A LOT, etc.
    So this is my problem for people who don't want to read the whole message:
    1. I can't connect to the internet with the iPad
    2. It shows the WiFi symbol saying its connected but I never get the checkmark or tick.
    3. It's not the router problem.
    4. I've tried other networks and it doesn't work. It just keeps on showing that loading circle right beside the network name.
    5. Do any of you know what this problem is? Or do you have a solution?
    Thank you for reading this and have a great day

    Since you are in a hotel, some of these are not applicable.
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Detection problems in IE?

    I discovered last night that the Javascript Flash detection
    is no longer working in Internet Explorer on either of my
    computers. The script cannot recognize that I have Flash installed.
    I'm not sure exactly when it quit working, but I went back and
    looked at sites I haven't touched in months that WERE working, and
    it doesn't work on any of them now. I recently did a Windows update
    on both computers so it's possible something happened, but I
    haven't been able to find any info online about any issues. If I
    disable Flash detection, everything runs fine, so my Flash
    component itself seems to work properly.
    On this computer, I have Internet Explorer 6.0.2900... and
    the Shockwave Flash object lists file Flash9.ocx. I tried updating
    to the most recent version of Flash on my laptop and that didn't
    fix the detection problems.
    I'm using the standard script detection from Flash
    Professional 8.0. The problem seems to be with the lines:
    set swControl =
    CreateObject("ShockwaveFlash.ShockwaveFlash." + CStr(i))
    if (IsObject(swControl)) then
    The If statement is returning false for every version. Anyone
    have any ideas about what could be causing this?
    Edit: Ok, if I change the line above to:
    set swControl = CreateObject("ShockwaveFlash.ShockwaveFlash")
    Then the IsObject() function returns true. And the line below
    that:
    swVersion = swControl.GetVariable("$version")
    seems to return the correct version.
    So far, in my testing, this actually seems to work. (Although
    I can't be sure if it works on browsers that aren't broken the way
    mine seems to be.) So did something happen that suddenly makes IE
    not allow you to create the object using the version number? And do
    you NEED to use the version number?

    Sounds like there may be a problem with your install ..
    perhaps you have two
    different play version on your PC (eg you've installed a
    newer version, but
    old one didn't fully uninstall itself).
    One possible solution (if that is the case) is to run the
    uninstall utility
    from Adobe, then search your harddrive for any files matching
    *flash*.ocx ..
    and if they are actually flash players (look at properties
    version info tab
    to ensure they are macromedia/adobe flash player ocx's -
    don't want to kill
    something to do with flash memory (say)) then delete them.
    Also kill off
    the c:\windows\system\macromed\flash folder .. so then you
    have no flash
    player ocx left. Then go to the Adobe web site and
    re-download/install the
    latest Flash Player. NOTE: if you do this, be very careful
    you only delete
    things that can safely be deleted without causing problems
    elsewhere.
    Jeckyl

  • WRT110 WIFI password problem

    Hi Everyone,
    I've got a very strange problem.  First, I indicated WPA under Wireless Security section and typed in my passphrase.  However when connecting to my wireless network name my passphrase never worked.  Second, I completely disabled security and tried to simply connect without any passphrase, but I was still being asked for a passphrase nonetheless.  I checked and double-checked and saved settings making sure security was disabled, but I was still being asked for a passphrase when choosing my wireless network!
    I could probably restore my WRT110 to factory settings, however I don't want to loose other configurations like certain open ports and IP addresses I opened up for firewall.
    Is there a way for me to resolve my WiFI password problem without restoring to factory default?  I just need to figure out how to make the WiFi passpharse work.  Here's what I have there:
    Security Mode: WPA Personal
    Encryption: TKIP
    Passphrase: 0sunspot0
    Key Renewal: 3600 seconds
    However, when I pick my wireless network and try to connect to it by typing in 0sunspot0, I get authentication failure!
    Am I doing something wrong?
    Thanks,
    Victor.
    Solved!
    Go to Solution.

    I have misplaced all relevant info. for my router.  I am trying to connect to a mini ipad.  What do I need?
    Is the router up and running and you would only want to add a device wirelessly? If so, you may access the setup page as sabretooth has said. To check the wireless settings, you may check this link, http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=476326f36c294e579ba6691a8db5411e_3698.xml&pid=80&r...

  • No more wifi detection,

    After last software update yesterday, the ATV3 would block after language question and keep repeating that screen.
    Tried to manually upgrade with mini USB and iTunes but no change, it stayed in a loop with that question after boot.
    So I installed previous upgrade again ( 5.02) and now I don't have any wifi detection anymore.
    Cable still works .
    Anyone an idea?
    How to upgrade to the latest software and have the ATV3 working again?
    And how to get the wifi back?

    1. Have you tried rebooting router?
    2. Reset network settings: Settings>General>Reset>Reset Network Settings

  • TS1559 Any Solutions to the WIFI Grayed Problem in 6.0.1?

    Any Solutions to the WIFI Grayed Problem in 6.0.1?

    I tried everything
    NW reset
    Restore
    Freez
    You name it, nothing works, its a software issue since bluetooth works fine and even the WIFI used to work fine under the 5.1.1 OS, the problem is in the new update 6.0.1 OS and whats bothering me the most is that Apple doesnt seem to care

  • Z30 wifi range problem after upgrade to 10.3.1.1565

    After upgrading on Z30 the OS from 10.2 to 10.3.1 I experience serious Wifi range problems. There is a room in our house where I had excellent wifi connection with 10.2 and now the Z30 does not find the router. Even the router SSID! If I go closer to the router, it connects (5-6 meters from the room where I tested). It is a quite new router, a Linksys EA6200 with the latest firmware. I rebooted the router. No result. I restarted Blackberry (switch on/off), no result. I deleted all wifi saved connection on phone and tried to reconnect. No result. I tried to make a soft reset (vol up/down buttons), no results. Dont understand, I made Over the Air (on wifi) OS update yesterday in the same room, same place. Now I dont see any router there altough the Android phone and the notebook gives 4 bar wifi there. Before OS Upgrade I made a full backup (everything) in the Blackberry Link, tried to restore to the earlier OS version, but the restore uploaded to the new OS the personal data and not the earlier OS System. How I could solve the Wifi problem or roll back to the earlier official version? I dont see possibility on phone. It's crazy to have a quite good business phone which is now unuseable for its original functions without normal wifi connectivity... I understand to advise hacking or restarting router, etc... but how about if I go to abroad? I cannot restart the router there... I need stable wifi or a stable operating system... 

    I have seen numerous posts on other forums about the degraded wifi performance on devices running 10.3.1.xxxx.
    I definitely noticed a dropoff in signal strength when I went up to 10.3.1. I remedied it by putting in a better router, but I don't believe one should have to do that in order to maintain was was acceptable performance under a previous OS. 10.3.1 is supposed to be an upgrade after all.
    I also notice a difference between Z10(STL100-1) and Z30(STA100-6) on 5GHz wifi : Z10 finds and connects with no problem, but Z30 does not find the network at all, even when right next to the router. I subsequently discovered that the router autoselects channel 149 on 5GHz, which the Z10 is happy with. For the Z30, I tried all other available 5GHz channels on the router in turn, and eventually found that Z30 will find and connect if the router is manually set to channel 48 only. A bit restrictive for a high-end device.
    It has been postulated that the claimed improved battery life on 10.3.1 comes at the expense of compromised wifi performance. Could this be the case?
    Hoping this issue soon finds itself in the "under investigation" box at BB.

  • Help with puzzling wifi range problem on Macbook Pro

    Hi There,
    I am experiencing wifi range problems with my MacBook Pro (10.9.4).
    Our wireless modem (Arris DG860) is located in the office, in the center of our home. The wifi bars register full on my Macbook and the internet works well in office.
    When I move my Macbook to the lounge room, 6 steps away, my internet stops working despite wifi bars remaining full. We also have an Apple TV in the lounge room (I have airplay disconnected on Macbook). 15% of the time, I can somehow get the internet to work in the lounge room (sometimes just by disconnecting airplay),then it mysteriously stops- with wifi bars remaining full.
    85% of time, the internet doesn't work at all in lounge room (still full wifi bars). Other rooms of the house that are similar distances away from modem experience the same problem. We did not experience this problem with our old Macbook pro (purchased in '09). With our old Mac we had same internet connection, modem and Apple TV.
    The only place our current Macbook receives good internet connection is in the office.
    We also have an iPad and two iPhone 4S'
    Any suggestions anyone? TIA

    Most people who live in neighborhoods or apartments are not blessed with so few WiFi transmitters to contend with. There are no clear channels for most people, even assuming the user knows how to optimize their router, which most people don’t.
    I would also explain that I am FCC licensed amateur radio operator K5ZN extra class. I know how radios work and how electromagnetic waves behave. Every diagnostic and symptom tells me there is some incompatibility between my MBPs radio and specifically the Comcast modem-router. In another discussion I gave some technical information about the problem which I spent several day diagnosing while using two different Comcast "Docsis 3" routers.
    I have not seen this WiFi problem when using Airport or other standard routers like Linksys or Netgear. The OP didn’t say what router they are using. My suspicions tell me that Apple is moving in the direction of a very sensitive power-saving radio while ISPs are trying to blast the neighborhoods with powerful WiFi. The result is that my poor Macbook can’t get a good signal.

Maybe you are looking for

  • How to avoid blank page in xml publisher report

    hi, i have a xml report, it shows 7 rows in one page. the question is: if there are just 7 rows , when previews with pdf, it will generate 2 pages, the first page shows 7 rows, and the second page is blank. anyone can help? you can get the rar file t

  • Is it possible to recover a folder ropped into 'File Vault' user?

    Hello all, I dropped a folder directly from one user folder into another user folder that is 'file-vaulted'. Yes, I did get a warning that it might not work, but no I didn't listen. The folder seems to have disappeared completely. It doesn't show up

  • Newbie requires a few pointers to get started

    Just starting out on the Mac and the development off (I've chosen Cocoa and got a book 'Learning Cocoa with Objective-C), and I'm trying to get my head around where to start. I'm not new to development, I'm currently a Java developer amongst other, a

  • Retrieving iweb site content from server?

    Hi y'all. I was working on my iweb site and everything was going dandy. Then my comp crashed and the only way to get it too work was to re-install the entire system. Unfortunately, I didn't get around to backing up my iweb stuff but I did publish it

  • Anyone Have both Lightroom 4 and Ps CS6 beta?

    Specifically, a friend of mine is reporting relatively sluggish performance with Lightroom 4 and I am seeing light, fast performance with Photoshop CS6's Camera Raw 7...  Maybe it's not butter smooth, but my preview display in Camera Raw definitely k