WIFI Disconnecting everytime with N86 version 30.0...

Nokia N86 model
Currently using software version: 30.009
After connecting to home WI-FI, it keeps on disconnecting every time.
Has anyone faced the same problem with the latest version.
whatever application i uses with my WIFI connection, it disconnect immediately say 1 0r 2mins maxs.

This sounds like the same issue which i had after upgrading firmware in my N97 mini.
Solution was to disable bluetooth, obviously bluetooth and wlan did interfere.
After that i got stable connection.
When i am done with wlan, i enable bluetooth again.
Give it a try, and report back if it did work for you...

Similar Messages

Constant home wifi disconnect/reconnect with GS3 and GS4

I've been having terrible trouble with my previous Galaxy S3 and my new Galaxy S4 on my home wifi network. They CONSTANTLY disconnect and reconnect. Sometimes it can happen 2 or 3 times in 1 minute, and sometimes it won't happen for 5 or 6 minutes, but then it will happen and it will happen 2 or 3 times in rapid succession. This is really irritating when I'm viewing a web page and it has to reload EVERY time the disconnect/reconnect happens.
What can I do to keep my GS4 from doing this?
I have the Verizon GT704WGB DSL modem/wireless router.
I have my laptop and my Kindle Fire HD connected via wifi to this router, and they never experience the problem, only my GS3 and GS4.
Any help in this matter would be greatly appreciated.

Hi TR_Young,
We're here to help! Have you tried resetting your router? Do you know if your Wi-Fi router needs to be updated? I understand wanting the phones to stay connected to Wi-Fi. Do the phones having problems have trouble on other Wi-Fi networks? We look forward to hearing from you about these details.
ElizabethE_VZW
Follow us on Twitter @VZWSupport

I have iphone 4 ios 6.1.3. My wifi disconnects everytime i lock my phone. Please help if you know the solution

Please help

But still its a disadvantage. Suppose my phone is in sleep mode and i get a chat message or some email. I wont get it at that moment, but after turning on my wifi manually, i'll receive the message. Dont you think its irritating?

I can't be the only one with this issue. MacBook Pro Retina Late-2013 WiFi disconnects after waking up from sleep.

Did anyone buy a MacBook Pro Retina 13" from Best Buy this Black Friday?
I'm having an issue where the WiFi disconnects after the MacBook wakes from sleep but only after a couple of minutes.
Once the WiFi disconnects, I can't reconnect to the same network and sometimes it won't find nearby networks.
I have to turn off the WiFi and wait for at least 5 seconds before turning it back on for it to auto-reconnect to my home network.
If I wait less than 5 seconds, it will continue to attempt connection to the home network but won't connect.
I've tried reformatting and deleting my network configurations as well as resetting my modem, power cycling it, etc.
I am using 2Wire Gateway modem/router from AT&T on b/g network.
I've tried connecting to a friend's network under Time Warner Cable and the same issue occurs.
I exchanged the MacBook at a Best Buy for a brand unopened one (I hope) and the same exact thing happens with this new one.
Really, I can't be the only one with this issue. Unless in a 0.00001% chance I received two defective units in a row?
Please.. does anyone have a clue why this is happening?

You're definitely not the only one. I have the same issue. I spent 6 hours over multiple days on the phone with Apple support trying a variety of things (some of which are mentioned above), and none of them worked. They finally sent me a replacement laptop. I made sure to try it periodicaly as I was moving files and installing applications to see if I ran into it again and things seemed okay at first but now I am running into the same issue and it is terribly annoying. I've got 5 other devices that connect to the same router and I've never had this issue with any of them.
My router is a Linksys E2000. I haven't tried changing the router channel but I have tried to cnnecting to other networks in the building I live in and I have run into the same issue there.

I have a Iphone 4S and i update a new version 6.1, and i have a problem with wifi from i update this version. What is this problem? thanks Andres

I have a Iphone 4S and i update a new version 6.1, and i have a problem with wifi from i update this version. What is this problem? thanks Andres

Move or Copy the ENTIRE iTunes folder from the old computer or the backup of the old computer to the new computer.

I set up a iMessage account with iphone number, I sign the number again after auto sign out when Wifi disconnected. Will it also send me a alert message at my iPhone ?

I set up a iMessage account with iPhone number, I sign in the number again after wifi disconnected. Will it send me the alert message at my iPhone again?

Did you remove your account information from the other person's iPhone?

Time Capsule WiFi disconnects when a Fujitsu Siemen Laptop with b/g network

Time Capsule WiFi disconnects when a Windows Vista based Laptop with "b/g" network connects. When i use Macbook with "n" Network.
Surprising that TC and MacBook both from Apple can't stay connected when Fujitsu Siemens Laptop joins through WiFi.
I use a DSL Modem (Speed 1 Mbps) connected thru ethernet to Time Capsule on Bridge Mode.

Yes, n is better, but if you have it running on b/g/n (since you have to with your b/g only notebooks) the n is inactive. Kind of a waste. Others have resorted to adding another wireless router which one set to b/g/n and the other n-only.

Wifi disconnect with in 5 min

Wifi disconnect with in 5 mins

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Ipad3 vs wifi? Everytime i lock the screen i am losing connection with my wifi

Ipad3 vs wifi? Everytime i lock the screen i am losing connection with my wifi. It has not happened before

Try restarting or rebooting your iPad. See if that helps.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Constant Wifi Disconnect After Moving To SystemD

Hi All,
I used netcfg for months with a WPA2 connection using the initscripts. I finally moved to systemD. I was getting dbus errors from systemD using systemctl so updated via pacman which fixed the errors. I did this within minutes apart so not for sure if a kernel update broke something - stupid move on my part.
Any how I followed the wiki guide for netcfg, within a few minutes and after a reboot was happily working away. I configured the wifi like so:
systemctl enable netcfg@gloryhole
Then the wifi disconnecting started at random intervals but very quickly, what seems to be less than 3 minutes.
localhost kernel: [ 9.331945] wlan0: authenticate with 90:a4:de:2f:1f:b9
localhost kernel: [ 9.351603] wlan0: send auth to 90:a4:de:2f:1f:b9 (try 1/3)
localhost kernel: [ 9.554574] wlan0: send auth to 90:a4:de:2f:1f:b9 (try 2/3)
localhost kernel: [ 9.556136] wlan0: authenticated
localhost kernel: [ 9.556291] rtl8192se 0000:1f:00.0: wlan0: disabling HT as WMM/QoS is not supported
localhost kernel: [ 9.567893] wlan0: associate with 90:a4:de:2f:1f:b9 (try 1/3)
localhost kernel: [ 9.569768] wlan0: RX AssocResp from 90:a4:de:2f:1f:b9 (capab=0x31 status=0 aid=3)
localhost kernel: [ 9.570797] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
localhost kernel: [ 9.570870] wlan0: associated
localhost kernel: [ 326.279834] NVRM: GPU at 0000:02:00: GPU-23b184ce-812d-5661-9f43-2ee29ea56551
localhost kernel: [ 383.804336] wlan0: deauthenticated from 90:a4:de:2f:1f:b9 (Reason: 2)
localhost kernel: [ 383.820139] cfg80211: Calling CRDA for country: EC
localhost kernel: [ 384.966159] wlan0: authenticate with 90:a4:de:2f:1f:b9
localhost kernel: [ 384.985739] wlan0: send auth to 90:a4:de:2f:1f:b9 (try 1/3)
localhost kernel: [ 384.987245] wlan0: authenticated
localhost kernel: [ 384.987311] rtl8192se 0000:1f:00.0: wlan0: disabling HT as WMM/QoS is not supported
localhost kernel: [ 384.998889] wlan0: associate with 90:a4:de:2f:1f:b9 (try 1/3)
localhost kernel: [ 385.000853] wlan0: RX AssocResp from 90:a4:de:2f:1f:b9 (capab=0x31 status=0 aid=3)
localhost kernel: [ 385.001928] wlan0: associated
localhost kernel: [ 443.766995] wlan0: deauthenticated from 90:a4:de:2f:1f:b9 (Reason: 2)
localhost kernel: [ 443.785044] cfg80211: Calling CRDA for country: US
localhost kernel: [ 444.920930] wlan0: authenticate with 90:a4:de:2f:1f:b9
localhost kernel: [ 444.940676] wlan0: send auth to 90:a4:de:2f:1f:b9 (try 1/3)
localhost kernel: [ 444.942174] wlan0: authenticated
localhost kernel: [ 444.942247] rtl8192se 0000:1f:00.0: wlan0: disabling HT as WMM/QoS is not supported
localhost kernel: [ 444.953807] wlan0: associate with 90:a4:de:2f:1f:b9 (try 1/3)
localhost kernel: [ 444.957208] wlan0: RX AssocResp from 90:a4:de:2f:1f:b9 (capab=0x31 status=0 aid=3)
localhost kernel: [ 444.958280] wlan0: associated
localhost kernel: [ 503.737604] wlan0: deauthenticated from 90:a4:de:2f:1f:b9 (Reason: 2)
localhost kernel: [ 503.759940] cfg80211: Calling CRDA to update world regulatory domain
localhost kernel: [ 504.899167] wlan0: authenticate with 90:a4:de:2f:1f:b9
localhost kernel: [ 504.918917] wlan0: send auth to 90:a4:de:2f:1f:b9 (try 1/3)
localhost kernel: [ 504.921386] wlan0: authenticated
localhost kernel: [ 504.921458] rtl8192se 0000:1f:00.0: wlan0: disabling HT as WMM/QoS is not supported
localhost kernel: [ 504.932053] wlan0: associate with 90:a4:de:2f:1f:b9 (try 1/3)
localhost kernel: [ 504.933936] wlan0: RX AssocResp from 90:a4:de:2f:1f:b9 (capab=0x31 status=0 aid=3)
localhost kernel: [ 504.935006] wlan0: associated
localhost kernel: [ 517.536570] wlan0: deauthenticating from 90:a4:de:2f:1f:b9 by local choice (reason=3)
localhost kernel: [ 517.569924] cfg80211: Calling CRDA for country: US
After reading some forums they recommended net-auto-wireless.
systemctl enable net-auto-wireless
Still no luck, another forum recommended removing netcfg and trying some thing else, since they had constant disconnects. I installed wicd and disabled services that could conflict with wicd. Disconnect problem still exists
I verified hardware is OK, in windoze wifi card works great, pulled down many gigs with no problem testing. My laptop has native systemD install with wicd and works great so nothing with my AP.
My system info:
mr337@chronos ~ $ uname -a
Linux chronos 3.6.9-1-ARCH #1 SMP PREEMPT Tue Dec 4 08:04:10 CET 2012 x86_64 GNU/Linux
mr337@chronos ~ $ lspci | grep -i network
1f:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN Controller (rev 10)
If anyone can spot a trouble service
mr337@chronos ~ $ systemctl list-units
UNIT LOAD ACTIVE SUB DESCRIPTION
proc-sys...t_misc.automount loaded active running Arbitrary Executable File Formats File System Automount Point
sys-devi...net-wlan0.device loaded active plugged /sys/devices/pci0000:00/0000:00:04.0/0000:1f:00.0/net/wlan0
sys-devi...-net-eth0.device loaded active plugged /sys/devices/pci0000:00/0000:00:06.0/0000:3f:00.0/net/eth0
sys-devi...-sda-sda1.device loaded active plugged WDC_WD1001FALS-00J7B1
sys-devi...-sda-sda2.device loaded active plugged WDC_WD1001FALS-00J7B1
sys-devi...-sda-sda3.device loaded active plugged WDC_WD1001FALS-00J7B1
sys-devi...-sda-sda4.device loaded active plugged WDC_WD1001FALS-00J7B1
sys-devi...-sda-sda5.device loaded active plugged WDC_WD1001FALS-00J7B1
sys-devi...block-sda.device loaded active plugged WDC_WD1001FALS-00J7B1
sys-devi...-sdb-sdb1.device loaded active plugged WDC_WD2500AAKS-00UU3A0
sys-devi...-sdb-sdb2.device loaded active plugged WDC_WD2500AAKS-00UU3A0
sys-devi...block-sdb.device loaded active plugged WDC_WD2500AAKS-00UU3A0
sys-devi...block-sr0.device loaded active plugged TSSTcorp_CDDVDW_TS-H653Q
sys-devi...und-card1.device loaded active plugged Logitech_USB_Headset
sys-devi...und-card0.device loaded active plugged /sys/devices/pci0000:00/0000:00:14.4/0000:07:04.0/sound/card0
sys-devi...tty-ttyS1.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS1
sys-devi...tty-ttyS2.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS2
sys-devi...tty-ttyS3.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS3
sys-devi...tty-ttyS0.device loaded active plugged /sys/devices/pnp0/00:07/tty/ttyS0
sys-subs...ices-eth0.device loaded active plugged /sys/subsystem/net/devices/eth0
sys-subs...ces-wlan0.device loaded active plugged /sys/subsystem/net/devices/wlan0
-.mount loaded active mounted /
dev-hugepages.mount loaded active mounted Huge Pages File System
dev-mqueue.mount loaded active mounted POSIX Message Queue File System
home.mount loaded active mounted /home
proc-sys...infmt_misc.mount loaded active mounted Arbitrary Executable File Formats File System
sys-kernel-debug.mount loaded active mounted Debug File System
tmp.mount loaded active mounted /tmp
cups.path loaded active running CUPS Printer Service Spool
systemd-...ord-console.path loaded active waiting Dispatch Password Requests to Console Directory Watch
systemd-...ssword-wall.path loaded active waiting Forward Password Requests to Wall Directory Watch
colord.service loaded active running Manage, Install and Generate Color Profiles
cronie.service loaded active running Periodic Command Scheduler
cups.service loaded active running CUPS Printing Service
dbus.service loaded active running D-Bus System Message Bus
[email protected] loaded active running Getty on tty1
ntpd.service loaded active running Network Time Service
rc-local.service loaded active exited /etc/rc.local Compatibility
sshd.service loaded active running OpenSSH Daemon
syslog-ng.service loaded active running System Logger Daemon
systemd-journald.service loaded active running Journal Service
systemd-logind.service loaded active running Login Service
systemd-...les-load.service loaded active exited Load Kernel Modules
systemd-remount-fs.service loaded active exited Remount Root and Kernel File Systems
systemd-sysctl.service loaded active exited Apply Kernel Variables
systemd-...es-setup.service loaded active exited Recreate Volatile Files and Directories
systemd-...-trigger.service loaded active exited udev Coldplug all Devices
systemd-udevd.service loaded active running udev Kernel Device Manager
systemd-...sessions.service loaded active exited Permit User Sessions
systemd-...le-setup.service loaded active exited Setup Virtual Console
wicd.service loaded active running Wicd a wireless and wired network manager for Linux
cups.socket loaded active listening CUPS Printing Service Sockets
dbus.socket loaded active running D-Bus System Message Bus Socket
syslog.socket loaded active running Syslog Socket
systemd-initctl.socket loaded active listening /dev/initctl Compatibility Named Pipe
systemd-journald.socket loaded active running Journal Socket
systemd-shutdownd.socket loaded active listening Delayed Shutdown Socket
systemd-...d-control.socket loaded active listening udev Control Socket
systemd-udevd-kernel.socket loaded active running udev Kernel Socket
dev-sda2.swap loaded active active /dev/sda2
arch-daemons.target loaded active active Arch Daemons
basic.target loaded active active Basic System
cryptsetup.target loaded active active Encrypted Volumes
getty.target loaded active active Login Prompts
graphical.target loaded active active Graphical Interface
local-fs-pre.target loaded active active Local File Systems (Pre)
local-fs.target loaded active active Local File Systems
multi-user.target loaded active active Multi-User
remote-fs.target loaded active active Remote File Systems
sockets.target loaded active active Sockets
sound.target loaded active active Sound Card
swap.target loaded active active Swap
sysinit.target loaded active active System Initialization
syslog.target loaded active active Syslog
systemd-...iles-clean.timer loaded active waiting Daily Cleanup of Temporary Directories

So still being frustrated and tired of having a long cat5 cable across my house I decided to take another whack at this.
First thing first I disabled WPA2 on the AP and let it wide open, even though every other device was working. Was hoping to rule out wpa but instead it got worse.
I first tried netcfg, after removing everything I could find on wicd. The issue with netcfg is I could connect but couldn't surf. A little testing showed that there is a problem with the wifi link established. It won't allow much or any traffic to go through. Pings barely work, surfing was hit and miss.
I decided to just connect via cli, once again removed netcfg, wicd, removed any trace files, disabled related services and rebooted to remove previous entries.
mr337@chronos ~ $ sudo iwlist scan
eth0 Interface doesn't support scanning.
lo Interface doesn't support scanning.
wlan0 Scan completed :
Cell 01 - Address: 90:A4:DE:2F:1F:B9
Channel:1
Frequency:2.412 GHz (Channel 1)
Quality=56/70 Signal level=-54 dBm
Encryption key:off
ESSID:"GloryHole"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s
Mode:Master
Extra:tsf=000000005d6beed4
Extra: Last beacon: 33ms ago
IE: Unknown: 0009476C6F7279486F6C65
IE: Unknown: 010482848B96
IE: Unknown: 030101
IE: Unknown: 0706555320010B1B
mr337@chronos ~ $ sudo iwconfig wlan0 essid GloryHole
mr337@chronos ~ $ sudo dhcpcd wlan0
dhcpcd[2132]: version 5.6.3 starting
dhcpcd[2132]: wlan0: sending IPv6 Router Solicitation
dhcpcd[2132]: wlan0: broadcasting for a lease
dhcpcd[2132]: wlan0: offered 176.16.128.30 from 176.16.128.1
dhcpcd[2132]: wlan0: acknowledged 176.16.128.30 from 176.16.128.1
dhcpcd[2132]: wlan0: checking for 176.16.128.30
dhcpcd[2132]: wlan0: sending IPv6 Router Solicitation
dhcpcd[2132]: wlan0: leased 176.16.128.30 for 7200 seconds
dhcpcd[2132]: forked to background, child pid 2158
mr337@chronos ~ $ ping google.com
PING google.com (74.125.225.37) 56(84) bytes of data.
64 bytes from ord08s06-in-f5.1e100.net (74.125.225.37): icmp_seq=1 ttl=54 time=31.6 ms
64 bytes from ord08s06-in-f5.1e100.net (74.125.225.37): icmp_seq=2 ttl=54 time=28.9 ms
64 bytes from ord08s06-in-f5.1e100.net (74.125.225.37): icmp_seq=3 ttl=54 time=36.9 ms
64 bytes from ord08s06-in-f5.1e100.net (74.125.225.37): icmp_seq=4 ttl=54 time=34.1 ms
64 bytes from ord08s06-in-f5.1e100.net (74.125.225.37): icmp_seq=5 ttl=54 time=44.8 ms
64 bytes from ord08s06-in-f5.1e100.net (74.125.225.37): icmp_seq=6 ttl=54 time=52.1 ms
64 bytes from ord08s06-in-f5.1e100.net (74.125.225.37): icmp_seq=7 ttl=54 time=40.8 ms
64 bytes from ord08s06-in-f5.1e100.net (74.125.225.37): icmp_seq=8 ttl=54 time=41.6 ms
64 bytes from ord08s06-in-f5.1e100.net (74.125.225.37): icmp_seq=9 ttl=54 time=26.9 ms
64 bytes from ord08s06-in-f5.1e100.net (74.125.225.37): icmp_seq=11 ttl=54 time=32.1 ms
64 bytes from ord08s06-in-f5.1e100.net (74.125.225.37): icmp_seq=12 ttl=54 time=26.7 ms
64 bytes from ord08s06-in-f5.1e100.net (74.125.225.37): icmp_seq=14 ttl=54 time=34.0 ms
64 bytes from ord08s06-in-f5.1e100.net (74.125.225.37): icmp_seq=15 ttl=54 time=28.6 ms
64 bytes from ord08s06-in-f5.1e100.net (74.125.225.37): icmp_seq=16 ttl=54 time=27.9 ms
64 bytes from ord08s06-in-f5.1e100.net (74.125.225.37): icmp_seq=17 ttl=54 time=67.7 ms
64 bytes from ord08s06-in-f5.1e100.net (74.125.225.37): icmp_seq=18 ttl=54 time=52.6 ms
64 bytes from ord08s06-in-f5.1e100.net (74.125.225.37): icmp_seq=19 ttl=54 time=698 ms
64 bytes from ord08s06-in-f5.1e100.net (74.125.225.37): icmp_seq=20 ttl=54 time=720 ms
64 bytes from ord08s06-in-f5.1e100.net (74.125.225.37): icmp_seq=21 ttl=54 time=380 ms
64 bytes from ord08s06-in-f5.1e100.net (74.125.225.37): icmp_seq=22 ttl=54 time=383 ms
64 bytes from ord08s06-in-f5.1e100.net (74.125.225.37): icmp_seq=23 ttl=54 time=852 ms
64 bytes from ord08s06-in-f5.1e100.net (74.125.225.37): icmp_seq=24 ttl=54 time=986 ms
I was doing the pings while trying to do a quick speed test but that hung too
mr337@chronos ~ $ wget -O /dev/null http://cachefly.cachefly.net/10mb.test
--2012-12-17 14:20:11-- http://cachefly.cachefly.net/10mb.test
Resolving cachefly.cachefly.net (cachefly.cachefly.net)... 205.234.175.175
Connecting to cachefly.cachefly.net (cachefly.cachefly.net)|205.234.175.175|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 10485760 (10M) [application/octet-stream]
Saving to: ‘/dev/null’
13% [============> ] 1,405,172 --.-K/s eta 20m 24s ^
Again I am getting these in the kernel.log
Dec 17 14:17:15 localhost kernel: [ 569.314584] wlan0: authenticate with 90:a4:de:2f:1f:b9
Dec 17 14:17:15 localhost kernel: [ 569.324640] wlan0: send auth to 90:a4:de:2f:1f:b9 (try 1/3)
Dec 17 14:17:15 localhost kernel: [ 569.527632] wlan0: send auth to 90:a4:de:2f:1f:b9 (try 2/3)
Dec 17 14:17:16 localhost kernel: [ 569.730752] wlan0: send auth to 90:a4:de:2f:1f:b9 (try 3/3)
Dec 17 14:17:16 localhost kernel: [ 569.933897] wlan0: authentication with 90:a4:de:2f:1f:b9 timed out
Dec 17 14:18:42 localhost kernel: [ 656.135945] wlan0: authenticate with 90:a4:de:2f:1f:b9
Dec 17 14:18:42 localhost kernel: [ 656.145999] wlan0: send auth to 90:a4:de:2f:1f:b9 (try 1/3)
Dec 17 14:18:42 localhost kernel: [ 656.150370] wlan0: authenticated
Dec 17 14:18:42 localhost kernel: [ 656.150404] rtl8192se 0000:1f:00.0: wlan0: disabling HT as WMM/QoS is not supported
Dec 17 14:18:42 localhost kernel: [ 656.162493] wlan0: associate with 90:a4:de:2f:1f:b9 (try 1/3)
Dec 17 14:18:42 localhost kernel: [ 656.365624] wlan0: associate with 90:a4:de:2f:1f:b9 (try 2/3)
Dec 17 14:18:43 localhost kernel: [ 656.568769] wlan0: associate with 90:a4:de:2f:1f:b9 (try 3/3)
Dec 17 14:18:43 localhost kernel: [ 656.579139] wlan0: RX AssocResp from 90:a4:de:2f:1f:b9 (capab=0x21 status=0 aid=2)
Dec 17 14:18:43 localhost kernel: [ 656.580162] wlan0: associated
Dec 17 14:18:43 localhost kernel: [ 656.580196] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Dec 17 14:23:48 localhost kernel: [ 962.118225] wlan0: deauthenticating from 90:a4:de:2f:1f:b9 by local choice (reason=3)
Dec 17 14:23:48 localhost kernel: [ 962.141969] cfg80211: Calling CRDA for country: US
Interesting thing is I am getting a different deauthenticating reason, originally was 2. Deauthenticated reason=3 means "deauthenticated because sending STA is leaving (or has left) IBSS or ESS The access point went offline, deauthenticating the client" or AP went offline, which it did not. (src: http://www.aboutcher.co.uk/2012/07/linu … on-codes/).
Keep in mind I run my house on the same wifi so if anything went down somebody always tracks me down to fix it. Also my ISP link is not the problem as I was downloading at the same time and not saturating my pipe. At this point I think it is just easier to run a cable under the house and mount a jack. Ideas?

OS X - Fix for wifi disconnect after suspend/resume

OS X - Fix for wifi disconnect after suspend/resume
I've purchased a Mac recently and since upgrading to Maverick have been having some problem with wifi after suspend/resume. Looking into the issue, I've found this thread: https://discussions.apple.com/thread/5495375 and some people have reported that turning off bluetooth did fix the issue.
For my case, this was not possible, so I've tried to make a little fix, that disable bluetooth on suspend and enable it on wake, but with a 10 seconds delay, in order to let the wifi connect successfully.
Here is my github repo for anyone to look at the code: https://github.com/Setsuna666/osx-wifibtfix
Here is the latest version of the fix, which include an uninstall script: https://github.com/Setsuna666/osx-wifibtfix/archive/v1.0.2.zip
If you have any questions or issues, please post it here so it can be easier for me to keep track of.

Installed properly this time:
It appears to work, when I resume from sleep the Bluetooth icon is off (gray) and wifi connects, after 10s Bluetooth icon comes on again.
Here is the correct output:
Antzcrashing-MacBook-Air:osx-wifibtfix-1.0.3 Antzcrashing$ sudo bash install.sh
Password:
Installing Wifi/BT fix by Setsuna666...
Downloading SleepWatcher...
Downloading file from http://www.bernhard-baehr.de/sleepwatcher_2.2.tgz...
% Total    % Received % Xferd Average Speed   Time Time     Time Current
                                 Dload Upload Total   Spent    Left Speed
100 43385 100 43385 0     0 28567 0 0:00:01 0:00:01 --:--:-- 28580
Extracting SleepWatcher...
x ./sleepwatcher_2.2/
x ./sleepwatcher_2.2/config/
x ./sleepwatcher_2.2/ReadMe.rtf
x ./sleepwatcher_2.2/sleepwatcher
x ./sleepwatcher_2.2/._sleepwatcher.8
x ./sleepwatcher_2.2/sleepwatcher.8
x ./sleepwatcher_2.2/sources/
x ./sleepwatcher_2.2/sources/Makefile
x ./sleepwatcher_2.2/sources/._sleepwatcher.c
x ./sleepwatcher_2.2/sources/sleepwatcher.c
x ./sleepwatcher_2.2/sources/sleepwatcher.xcodeproj/
x ./sleepwatcher_2.2/sources/sleepwatcher.xcodeproj/bb.pbxuser
x ./sleepwatcher_2.2/sources/sleepwatcher.xcodeproj/bb.perspectivev3
x ./sleepwatcher_2.2/sources/sleepwatcher.xcodeproj/project.pbxproj
x ./sleepwatcher_2.2/config/de.bernhard-baehr.sleepwatcher-20compatibility-localu ser.plist
x ./sleepwatcher_2.2/config/de.bernhard-baehr.sleepwatcher-20compatibility.plist
x ./sleepwatcher_2.2/config/rc.sleep
x ./sleepwatcher_2.2/config/rc.wakeup
Creating dependencies for SleepWatcher...
Installing SleepWatcher...
Copying SleepWatcher configuration...
cp: /Users/Jeffrey/Documents/OS: No such file or directory
cp: Stuff/MAC/osx-wifibtfix-1.0.3/extra//rc.sleep: No such file or directory
cp: /Users/Jeffrey/Documents/OS: No such file or directory
cp: Stuff/MAC/osx-wifibtfix-1.0.3/extra//rc.wakeup: No such file or directory
Starting SleepWatcher...
Downloading blueutil...
Downloading file from http://www.frederikseiffert.de/blueutil/download/blueutil.dmg...
% Total    % Received % Xferd Average Speed   Time Time     Time Current
                                 Dload Upload Total   Spent    Left Speed
100 33343 100 33343 0     0 11945 0 0:00:02 0:00:02 --:--:-- 11942
Mounting blueutil disk image...
Checksumming Driver Descriptor Map (DDM : 0)…
Driver Descriptor Map (DDM : 0): verified   CRC32 $0275F970
Checksumming Apple (Apple_partition_map : 1)…
Apple (Apple_partition_map : 1): verified   CRC32 $1779B6BD
Checksumming disk image (Apple_HFS : 2)…
          disk image (Apple_HFS : 2): verified   CRC32 $920D4FD8
Checksumming (Apple_Free : 3)…
                    (Apple_Free : 3): verified   CRC32 $00000000
verified   CRC32 $AFAB3FAE
/dev/disk2              Apple_partition_scheme
/dev/disk2s1            Apple_partition_map
/dev/disk2s2            Apple_HFS                        /Volumes/blueutil
Installing blueutil...
Finished installing Wifi/BT fix
Now try to suspend and resume your Mac, your wifi should connect without issue

Asha 302 wifi disconnect

Hello everyone, I have a problem with my Asha 302 wifi connection. Whenever I connect to my home wireless network, wifi stays connected for a few seconds and disconnects, when I trying to browse the internet, it connects again but after a few seconds disconnects, after 5 or so seconds it connects again and it continues in such a spiking manner. It might not be big of a problem, but I cannot download anything, every time wifi disconnects itself my download fails. Is there a reason for such kind of behavior?
Best Regards

Did it work once? Or has it never worked, yet? Which Wi-Fi access point do you use (manufacturer, model and if known, the firmware version)?

Why won't my wifi stay connected with lion

I recently installed lion on my imac. Why won't my wifi stay connected after I shut it down

This has been well discussed on another thread here: https://discussions.apple.com/thread/3191630?start=2055&tstart=0
(There appear to be no moderators on these forums to make sure that new threads with the same topic don't get linked to a parent !?)
Anyway... The issues appear for many to be related to a specific Airport card type & firmware version.
I've had constant disconnect problems with my Mini since upgrading to Lion.
My Airport card specs are:
Card Type:                              AirPort Extreme (0x168C, 0x86)
Firmware Version:                    Atheros 5424: 2.1.14.9
Connecting to my Time Capsule distributing on:
          PHY Mode:          802.11a
The Atheros firmware version appears to be the issue depending on certain wifi network conditions.
After some playing about today I think I've managed to force my Mini to connect on a better frequency, without having to roll back the firmware to the Snow Leopard version or mess with the Mini Airport card settings (via Terminal) by changing some settings in my router (Time Capsule).
These are the changes I made:
Airport Utility > Wireless > Wireless Options
Set Radio Mode to 802.11 a/n - b/g instead of 802.11 a/n - b/g/n (Automatic)
Set 2.4 GHz Channel to 13 instead of Automatic
Set 5GHz Channel to 48 instead of Automatic
My Mini now connects on:
PHY Mode:          802.11g
Signal / Noise:          -64 dBm / -96 dBm
Transmit Rate:          54
instead of previously
PHY Mode:          802.11a
Signal / Noise: -73 dBm / -96 dBm
Transmit Rate: 36
This appears now to be stable (no drops in the last 4 hours). It's a low transmit rate still, but better than before.
The iMac is still connecting on
PHY Mode:          802.11n
Signal / Noise:          -69 dBm / -88 dBm
Transmit Rate:          216
and all is right with the world (hopefully for the long term)

Bootcamp wifi disconnects periodically

Hi all
I've got a late 2013 MacbookPro Retina base model with graphics card. I am having trouble with WIFI on bootcamp with Windows 7 Enterprise. Periodically the wifi connection will drop out, and when I move from one phyical location to another, the computer does not recognize that the wifi network is no longer there and will stay connected to the previous wifi, ignoring a new, working wifi network.
To fix the connectivity problem, I manually disconnect and reconnect to the appropriate network.
Any idea how to make this work automatically?
Thanks,
awo

Hi,
You can refer to this blog, and try to roll back to the older version of network adapter driver to check the results.
Windows 8.1 Wifi showing "limited" or "No Internet Access"
http://blogs.technet.com/b/dennis_schnell/archive/2013/08/31/windows-8-1-wifi-showing-quot-limitied-quot-or-quot-no-internet-access-quot.aspx
If the issue persists, please help to collect following information for further research:
1) Enable RAS Tracing on the client.
- Over an Administrative command prompt.
- C:\> netsh ras set tracing * enabled
2) On the client enable the following log as well:
- Over an Administrative command prompt.
- C:\> netsh trace start scenario=netconnection capture=yes tracefile=c:\net.etl
3) Now, turn off Wireless adapter on the client and Turn it back ON for making it to authenticate. Once it fails to connect to the Wireless network, proceed to the next step.
4) Disable RAS Tracing on the client.
- Over an Administrative command prompt.
- C:\> netsh ras set tracing * disabled
5) On the client disable the following log as well:
- Over an Administrative command prompt.
- C:\> netsh trace stop
6) Please provide the following files:
From the Client:
a) ZIP folder of C:\Windows\Tracing
b) C:\Net.etl and C:\Net.cab
Upload these files in SkyDrive and post back the shared link.
Keep post.
Kate Li
TechNet Community Support

How do you transfer Apple IDs from one ipad to another iPad? I got the new ipad and gave my ipad 2 to my wife who had the first version and now I can't get my Apple ID off so she can use her Apple ID.

how do you transfer Apple IDs from one ipad to another iPad? I got the new ipad and gave my ipad 2 to my wife who had the first version and now I can't get my Apple ID off so she can use her Apple ID.

You don't transfer Apple ID's from one device to another one. You sign out in the settings, )the App Store and iTunes if necessary) and then sign in with the other ID.
Settings>iTunes & App Stores>Apple ID>Sign out. Them sign in with the other ID. You can sign out of the app store and iTunes as well by going to the featured Atab in the App Store and the music tab in iTunes, swipe to the bottom and access the Apple ID in there.
You should have erased the iOad before you gave it to her in Settings>General>Reset>Erase all content and settings. That way she could set up the iPad as new with her own Apple ID.
Be aware of the fact that if you use each others ID's in order to download past purchased content to your own iPads, you will lock yourself out of your own ID as you will have associated your iPad with the other person's Apple ID.
In other words, if you sign into your wife's ID on your iPad so that you can download an app or an album so that you don't have to pay for it again, you will lock yourself out of your Apple ID for 90 days.

WIFI Disconnecting everytime with N86 version 30.0...

Similar Messages

Maybe you are looking for