Wifi disconnects after sleep and takes long time to reconnect with Mavericks

Has anyone/ Apple come up with a solution? A workaround OTHER THAN disabling then reenabling the wifi adapter? This is certainly frustrating

Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
1. Make sure the network is on the preferred list by following these instructions. It's important to read the article carefully, as it's the starting point for any further efforts to solve the problem. If you skip any of the steps, the problem may not be solved. Make sure the box marked
Remember networks this computer has joined
is checked.
2. Follow the instructions in this support article under the heading
Symptom: After restarting or waking from sleep, my computer might not connect to the Internet
3. Reset the PRAM.
4. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
5. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
6. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
7. Repair permissions on the startup volume.
8. Turn off Bluetooth and test.
9. Reset the System Management Controller.
10. This step shouldn't be necessary, but has been advised by Apple Support in some cases, apparently as a workaround for a bug. Open the Energy Saver pane in System Preferences. If applicable, click the padlock icon in the lower left corner to unlock the settings. Enter your administrator login password when prompted.
Select the Power Adapter tab and uncheck the boxes marked
Wake for Wi-Fi network access
and
Enable Power Nap...
if present. Then, if the computer is a MacBook, select the Battery tab and uncheck
Enable Power Nap...
11. Reinstall OS X.

Similar Messages

  • Why outlook2011 mac version* takes long time to boot with OSX

    why outlook2011 mac version* takes long time to boot with OSX

    Okay, so after doing all of the above, the computer still takes between 40 seconds and 1 minute or so to boot up, and the VersionCue messages still appear. However I discovered that the "kdcmond cannot retrieve..." messages disappeared after I disabled my ethernet connections. So at least I know that that had nothing to do with the extended boot-up time.
    I have heard that the more RAM you have, the longer it takes to boot due to the RAM count. Since I have 10 GB, maybe this is why?
    I've included the most recent Console messages below:
    22/4/08 9:56:16 AM com.apple.launchctl.System[2] launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
    22/4/08 9:56:16 AM com.apple.launchd[1] (com.adobe.versioncueCS3) Unknown key: ServiceDescription
    22/4/08 9:56:16 AM com.apple.launchd[1] (org.cups.cups-lpd) Unknown key: SHAuthorizationRight
    22/4/08 9:56:16 AM com.apple.launchd[1] (org.cups.cupsd) Unknown key: SHAuthorizationRight
    22/4/08 9:56:16 AM com.apple.launchd[1] (org.ntp.ntpd) Unknown key: SHAuthorizationRight
    22/4/08 9:56:39 AM com.apple.SystemStarter[28] Starting Aladdin USB daemon
    22/4/08 9:56:39 AM org.ntp.ntpd[25] Error : nodename nor servname provided, or not known
    22/4/08 9:56:39 AM com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[74]) Exited: Terminated
    22/4/08 9:56:39 AM com.apple.launchctl.Aqua[90] launchctl: Please convert the following to launchd: /etc/machinit_peruser.d/com.adobe.versioncueCS3.monitor.plist
    22/4/08 9:56:42 AM com.apple.launchd[82] (0x1011e0.VersionCueCS3monitor) Failed to check-in!

  • My mac shutdown suddenly fr0m time to other and take long time to open

    hi everybody,
    I think i have big problem ,i have macbookpro I5 13" early 2011  , i just changed the board to I7 ( used  board got it from net ) after USB ports in my original logicboard are damaged due to drop  , after changing the board the mac is unstable, it take long time(half hour!) to show up anything after press power,  yes I press power and there are no response  from the mac (black monitor as its ) , just   i hear  a noise from the empty CD drive . once it open it work fine for a while (may 2 hours or more ) and then shutdown suddenly! and you have wait more than half hour to open it again if im lucky.
    Itried to rest the mac many times, replace the RAM places , i thought may the problem come from overheating the CPU, i monitored the CPU tempreture just before the suddenly shutdown was 57C
    please help ,any suggetions ?

    Run an Apple hardware Test:
    support.apple.com/kb/ht1509http://
    You may have to use OPTION D to start it.
    See what that picks up. 
    You may also bring the MBP to an Apple store or AASP for a diagnostic evaluation.
    Ciao.

  • All USB drives disconnect after upgrade and clean install of MAC OS X Mavericks

    I first upgraded to Mavericks and noticed that my external USB dries would disconnect after MBP Retina Mid 2012 model was updated to Mavericks.  These worked fine in all versions of Mac OS X before upgrade.  So I did a clean install figured my machine would benifit from this anyway. This did NOT fix the problem. 
    Wouldn't be much of an issue but I use this macine as a media server with Plex and all the media is in one of the external USB 3.0 drives.  All drives are from Seagate, and have found no info there.  Guessing this is a bug that Apple needs to fix unless its a Seagate issue which I doubt. 
    My TEMP FIX while my machine is plugged in to the power adapter and drives.
    SETTINGS - ENERGY SAVER - Power Adapter - Computer Sleep set to NEVER

    If the tracks are recognized by your iPod (playable), search VersionTracker for "iPod". You'll find a number of utilities that can transfer your tracks and your playlists from your iPod back to your Mac.
    If they're just on your iPod as data, then I'm not certain since I don't use a custom hierarchy, but you should be able to copy the folder back to your iTunes Music folder, turn off the "copy to iTunes library when adding to library" preference, and then use the Add To LIbrary command to get them recognized by iTunes. Again, though, I don't use a custom hierarchy, so you might want to ask that question as a new post, just to get additional opinions.
    BTW, an iPod is not a reliable backup for your tracks. Too many situations can arise that would cause your iPod to need to be erased. I strongly recommend that you make backups, particularly of any tracks purchased from the iTunes Music Store or that would otherwise be difficult to replace, to CD, DVD, external hard drive, or other medium.

  • Ipad key note repeadly crashing and takes long time to open in latest ios n ipad? Can any one help me

    Help

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • Iphone takes LONG time to sync with iTunes?

    Hi all,
    I have and Iphone 3G with 8GB pretty much stuffed, I have only 200MB free and 1000 audio, 50 podcast video, 60 photo and TONS of apps..
    I just check how long it would take to sync with my PC yeasterday... 10 hours... is that normal for a backup and sync? how can I speed up the process?
    thanks

    I'm having the same problem. It's definitely the backup portion. I located my backup folder, and it had over 20k files! I tried deleting the folder and backing up again, and have yet to complete a full backup (they're just too long - I'm constantly having to stop the process to take the phone with me). The latest one was 2 hours and only half done (with 8k files in the folder). I did have facebook and linkedin on the phone, so I've removed those and restarted the backup. It doesn't seem much different so far, but I think I may leave it overnight to see what happens. Could it be that the files (like caches or whatever) used by facebook and linkedin are still on the iphone even w/o the apps? How can I clean up my iphone w/o resetting it completely (I don't want to lose the data on there and I don't currently have a complete backup - though maybe after tonight I will).
    Any other apps you know of that have this issue? I can't believe Apple just lets this type of sloppy file management occur.

  • T400 boot time takes long time & has issue with restart

    Not sure if any one has already posted this and got replies...
    my T400 has a strange issue. it takes a lot time in pre-boot... a cursor blinks on the top left corner for 5+ minutes and then loads the 'Windows loading...' screen for about another 5 mins and finally shows the windows logon screen.
    Additionaly, when i hit shutdown, i am fine. if i hit restart - i am sitting there for ever. 
    my laptop has 8GB RAM + 256 GB SSD + Windows 7 Ultimate x64.

    Srini,
    I brought your tweet in and started a new thread and then found you already had a forum discussion going, so I'll just apend to your original thread and will leave this since I tweeted the link back to you to let you know we were taking a look.(Apologies) 
    Does this abnormally long startup of your T400 occur when docked or by itself?  On battery or on AC power?   
    Have you checked the boot device order in BIOS?  Make sure HDD is listed first.
    Are there a lot of applications being loaded in the startup folder?
    Have you tried using the MSCONFIG utility (start -> run ->msconfig) and then selected the startup tab to see what programs are being loaded during boot and if you can uncheck some that you don't always need to load?
    This could reduce your boot time.  I believe this, along with some setting tweaks was suggested in a similar T400 slow boot thread here...
    Perhaps other members will have additional suggestions....
    Mark
    ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
    Mark Hopkins
    Program Manager, Lenovo Social Media (Services)
    twitter @lenovoforums
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • HT4759 Hello .. I've been subscribed for ic;oud for 20$ per year and I found it useless for many reasons: that I can not disconnect my mobile while the uploading process and it takes long time for uploading my data .. Its not a reliable system that's why

    Hello .. I've been subscribed for ic;oud for 20$ per year and I found it useless for many reasons: that I can not disconnect my mobile while the uploading process and it takes long time for uploading my data .. Its not a reliable system that's why I need to deactivate the space service and take my money back .. Thanks

    The "issues" you've raised are nothing to do with the iCloud service.
    No service that uploads data allows you to disconnect the device you are uploading from while uploading data. Doing so would prevent the upload from completing. It is a basic requirement for any uploading service that you remain connected to it for uploading to be possible.
    The time it takes to upload data to iCloud is entirely dependent on how fast your Internet connection is, and how much data you are uploading. Both of these things are completely out of Apple's control. Whichever upload service you use will be affected by the speed of your Internet connection.

  • I have the current Mac Pro the entry level with the default specification and i feel some slow performance when applying after effects on my videos using final cut pro and also rendering a video takes long time ? what upgrades do you guys suggest?

    i have the current Mac Pro the entry level with the default configuration   and i feel lack of  performance when applying after effects on my videos using final cut pro and also rendering a video takes long time ? what upgrades do you guys suggest i could do on my Mac Pro ?

    256GB SSD  it shipped with will run low and one of the things to watch.
    Default memory is 12GB  also something to think about.
    D500 and FCP-X 10.1+
    http://macperformanceguide.com/index_topics.html#MacPro2013Performance
    Five models of 2013 Mac Pro running Resolve, FCPX, After Effects, Photoshop, and Aperture

  • SL takes longer time to start up and shut down after "IceClean".

    Greetings,
    After "IceClean" (both maintenance and cleanup), SL seems (obviously) to take longer time to start up and shut down.
    Any idea why and how can I resolve it?
    Thank you so much.
    Cheers.

    Hi,
    I've finally able to solve the problem. The problem was due to start up item. There were 2 trial application (expired long ago) in the folder. After clearing the application, start up and shut down are fast as light.
    I think I've "awaken" the start up application after "IceClean" as IceClean has deleted their log file or something like that and therefore the applications have to run again.
    In order to be fair to IceClean, it is my fault to be blamed.
    Thanks again.
    Cheers

  • I can't be the only one with this issue. MacBook Pro Retina Late-2013 WiFi disconnects after waking up from sleep.

    Did anyone buy a MacBook Pro Retina 13" from Best Buy this Black Friday?
    I'm having an issue where the WiFi disconnects after the MacBook wakes from sleep but only after a couple of minutes.
    Once the WiFi disconnects, I can't reconnect to the same network and sometimes it won't find nearby networks.
    I have to turn off the WiFi and wait for at least 5 seconds before turning it back on for it to auto-reconnect to my home network.
    If I wait less than 5 seconds, it will continue to attempt connection to the home network but won't connect.
    I've tried reformatting and deleting my network configurations as well as resetting my modem, power cycling it, etc.
    I am using 2Wire Gateway modem/router from AT&T on b/g network.
    I've tried connecting to a friend's network under Time Warner Cable and the same issue occurs.
    I exchanged the MacBook at a Best Buy for a brand unopened one (I hope) and the same exact thing happens with this new one.
    Really, I can't be the only one with this issue. Unless in a 0.00001% chance I received two defective units in a row?
    Please.. does anyone have a clue why this is happening?

    You're definitely not the only one.  I have the same issue.  I spent 6 hours over multiple days on the phone with Apple support trying a variety of things (some of which are mentioned above), and none of them worked.  They finally sent me a replacement laptop.  I made sure to try it periodicaly as I was moving files and installing applications to see if I ran into it again and things seemed okay at first but now I am running into the same issue and it is terribly annoying.  I've got 5 other devices that connect to the same router and I've never had this issue with any of them.
    My router is a Linksys E2000.  I haven't tried changing the router channel but I have tried to cnnecting to other networks in the building I live in and I have run into the same issue there.

  • Wifi disconnects after about a minute after i am no longer using my computer . Why is this happening?

    After logging into my wifi connection, which does take some time to do.
    Why does my wifi disconnect after not using my computer for a few minutes?
    I am on osx lion  10.7.5

    Computer entering sleep mode after few minutes?

  • Delete Index in Process Chain Takes long time after SAP BI 7.0 SP 27

    After upgrading to SAP BI 7.0 SP 27 Delete index Process & Create index process in Process chain takes long time.
    For example : Delete index for 0SD_C03 takes around 55 minutes.
    Before SP upgrade it takes around 2 minutes to delete index from 0SD_C03.
    Regards
    Madhu P Menon

    Hi,
    Normally  index  creation or deletion can take long time in case  your database statistics are not updated properly, so can check  stat  after your data loading is completed and index generation is done,  Do creation of database statistics.
    Then try to recheck ...
    Regards,
    Satya

  • Takes long time for shutdown after adding to domain

    Hi,
    Workstation OS - Window 7
    Domain Controller OS - Window server 2008 R2 standard
    Following thing i have measure with Stopwatch.
    1) When the laptop is in workgroup, it takes just 17 second for shutdown.
    2) when i added the same laptop in domain ( corp.abc.com ), now it takes 1minutes and 22 second for shutdown. ( it just show shutting down screen )
    Why the shutdown time increased so much?
    Do you have any idea?
    Note:- i have not make any changes in laptop, nor added any software. I have done the above testing because user start complaining that after putting laptop in domain it takes long time for shutdown. It's happening to all laptop where the OS is window 7
    There is no logoff scripts / gpo's as well as we don't have roaming profiles.
    Please advice.
    Thanks & Regards,
    Param
    www.paramgupta.blogspot.com

    Hi,
    To troubleshooting this issue, please install Windows Performance Tools (WPT) Kit. The Windows Performance Tools (WPT) Kit contains performance analysis tools, and is designed for analysis of a wide range of performance problems including application start
    times, boot issues, deferred procedure calls and interrupt activity (DPCs and ISRs), system responsiveness issues, application resource usage, and interrupt storms.
    To get the installer, you have to install the Windows 7 SDK.
    Microsoft Windows SDK for Windows 7 and .NET Framework 3.5 SP1
    http://www.microsoft.com/en-us/download/details.aspx?id=3138
    For shutdown tracing:
    Run command:
    xbootmgr -trace shutdown -noPrepReboot -traceFlags BASE+CSWITCH+DRIVERS+POWER -resultPath C:\TEMP
    Collect logs and post them for further troubleshooting.
    For more information please refer to following MS articles:
    Long Shutdown Time on Windows 7 Ultimate x64
    http://social.technet.microsoft.com/Forums/en/w7itproperf/thread/11a42a93-efd2-4184-9ce8-bbc1438b7ea6
    Long shutdown time on Windows 7 64 bit laptop
    http://social.technet.microsoft.com/Forums/en-US/w7itproperf/thread/4440fc6e-c81e-440c-9183-9b7e176729d2
    Lawrence
    TechNet Community Support

  • Why it takes long time to shut down after i upgrade to OS X ver 10.8.2?

    why it takes long time to shut down after i upgrade to OS X ver 10.8.2?

    Can't really say, but I see this occurring on all of my Macs since the 10.8.2 update and keep reading about it at several other Mac user boards.
    Bottom line: it's a general problem, but more of an inconvenience, than a serious problem. Probably will be solved with the next update.

Maybe you are looking for

  • InDesign CC crashes when exporting to PDF

    My file keeps crashing whenever I try to export to PDF I have checked that there are no TIFF all images are jpeg, psd, eps or pdf I have also tried saving as IDML and exporting and it still crashe I have copied everything into a new document and this

  • How do you get addresses to appear on TO instead of CC?

    Why am I unable to put addresses under TO when trying to forward email message?  It will only let me enter addresses on the CC (second line).  Can someone help me change this?

  • Workflow for Payment Request

    Hello , Is there any standard workflow(s) for Payment Request Release procedure (T-Code : F871)?

  • Cant open over network from Windows to Leopard, but ok to Tiger

    Hi We have a number of Mac Pro's some running Tiger and others running Leopard. I can open any quicktime file over our network from a PC to any Tiger Mac, but not to a Leopard Mac. Why not? I can see the files I can open any other file type, just not

  • Chart - Reposition No Data Found Message

    Hi All I would like to know how to reposition the No Data Found message displayed in SVG Charts. It currently clashes with the Title / Legend. I have tried adding <br> which just makes it the message dissappear completely. &nbsp doesnt work either. A