WIFI DO NOT WORK

My wifi is not working after I have installed the new version 6.1.3. The color is grey and I've tried already several possible solutions, restore, download again, fridger,, reset everything. Nothing works...

Last week millions had an issue with iMessage. The forum was swamped; there were 4 pages of threads about it, and hundreds of responses in every thread. This problem affects very few people, and there are several different causes. None of the 20 iPhones in my office have any problem. It's real, but it isn't common and isn't an issue with 6.1.3, which was a very minor update fixing a vulnurability that could allow someone to bypass the lock code. No way it could have caused a WiFi problem. If you actually research it you will see that there are WiFi problem posts all the time, for the past 5 years. If you want it fixed you will have to research in the forum or other sites and find out how to fix it on your phone. Or live without WiFi. Those are your only 2 choices.

Similar Messages

  • I have i phone 4s i there is problem of wifi my wifi is not working when i go to the wifi there is no working on off when i update it as a 6.1 ios on that time again it was good but after 2 days again the same problem i am too tired

    I have i phone 4s i there is problem of wifi my wifi is not working when i go to the wifi there is no working on off when i update it as a 6.1 ios on that time again it was good but after 2 days again the same problem i am too tired and i also reset network setting but nothing gonna be worked

    Sounds like the device was dropped at some point and damaged as a result.
    Take it to Apple for evaluation and a replacement.

  • TS4062 My Iphone won't appear in my devices in Itune.... And the WiFi does not work on my phone.... I seems like there is no solution to update my phone to the new ios on my computer or WiFi without using the 3g because of this!!! help me out

    My Iphone won't appear in my devices in Itune.... And the WiFi does not work on my phone.... I seems like there is no solution to update my phone to the new ios on my computer or WiFi without using the 3g because of this!!! help me out

    Hello there, TempestBelcher.
    It seems you've covered all the bases, but feel free to review the iPhone Troubleshooting Assistant for connectivity here:
    Apple - Support - iPhone - Calls Troubleshooting Assistant
    http://www.apple.com/support/iphone/assistant/calls/#section_0
    If you've followed all the instructions then there are a few good recommendations for what to do next in the last step.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • Wifi is not working in my iphone 4s after upgrading its ios to ios 7.. now i want to downgrade it back to ios 6.1.3.. is it possible to do it and if yes then HOW?? Please help

    wifi is not working on 4s after upgrading its ios version.. please help me, what to do???

    thanks, but what if i restore my iphone using itunes, will it help me? actually i brought this phone from australia and now i am using it in india and it is factory unlocked.. so if i restore it to factory setting then shall i have to go through factory unlock process again or my phone will stay activated for indian telecom network?

  • Wifi Sync not working on iOS 6 and iTunes 10.7 with iPhone 4S

    I am running Windows 7 64-bit but WiFi Sync is not working on either my iPhone 4S or my wife's iPhone 4S.  Worked fine before upgrading.  All settings look correct in iTunes 10.7 and on our iPhones 4S's.  Already tried uninstalling iTunes and all associated Apple programs (Bonjour, Apple Mobile Device Support, Apple Application Support, etc) and reinstalling iTunes but no help.  Temporarily disabling Norton Firewall did not help.  If I hook up either of our two 4S phones via USB wire, they Sync and Backup fine.  Just WiFi Sync not working.  Can't initiate sync from iPhones because button is ghosted stating it is waiting for PC to be present.  Phones don't show up under Devices in iTunes unless hard-wired via USB cable.  Any suggestions?

    I am getting sync issues too (although on OSX) - seems like others are getting issues too:
    https://discussions.apple.com/message/19834721#19834721
    Good luck,
    Chris

  • My iPod Touch 3rd gen is screwed up the backlights screwed and the Wifi is not working its showing no wifi! What should i do??

    My iPod Touch 3rd gen is screwed up the backlights screwed and the Wifi is not working its showing no wifi!

    See:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
    Settings > AirPlane Mode ON, Do Not Disturb ON
    Power down and wait 5-10 minutes
    Power up
    Settings > AirPlane Mode OFF, Do Not Disturb OFF
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar
    For backlight
    - Reset the iOS device. Nothing will be lost       
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                  
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.                     
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      

  • My iPHONE 5 wifi is NOT working when am 3 feet away from router while my iPhone 4s has full signal all the time.Please help.

    My iPHONE 5 wifi is NOT working when am 3 feet away from router while my iPhone 4s has full signal all the time.Please help.

    The problem would seem to be in the firewall in your router.  Have you tried disabling it? I assume you've updated the router firmware, right?  Consider bypassing the ISP provided router (using it as a modem only) and unsing another device such as an Aiport Express.

  • Wifi is not working after update to ios5.0.1 in my iPhone 4s

    Recently I update to new version of ios5 after that my wifi connectionis not working .can any one resolve this problem please?

    I had the same issue before. But not any more....
    Step1: Turn off your phone.
    Step2: Unplug the router from supply.and turning off is different. So unplug it.
    Step3: turn on router and phone back.
    Try connecting now; which should work ....
    This fixed my phone
    Check it out.....

  • TS1398 when i update my software to 6.1.3(10B329)to I phone 4s the wifi is not working and not auto join the network that i have already connected to

    when i update my software to 6.1.3(10B329)to I phone 4s the wifi is not working and not auto join the network that i have already connected to

    First, grow up.  Just because YOUR phone isn't working, doesn't mean Apple put out bad software.  I've not had any difficulty, nor has anyone else I know.  And just how is Apple risking lives with Bluetooth kits not working?  It's YOUR decision to talk on the phone or text and drive.  Not Apple's.
    We're users here, volunteering our time to help others.  Posts like yours, which are whiny and ranting, simply means we're likely to ignore you and not provide you with any help.  Not to mention, it makes you look absolutely foolish.
    Further making you look foolish is the fact that you haven't even asked a technical support question, nor have you provided anyone here with any troubleshooting steps you might have taken, including those recommended in the user guide.
    Good luck getting help.
    GDG

  • Wifi is not working properly once i updated to the new operating system.

    My I pphone 4s wifi is not working properly once the softwere is updated to the new IOS.
    It shows the wifi but when selected its says "unable to connect". I tried connecting to many wifi networks but gives the same error message.
    Kindly advice how to rectify this

    I am trying that and itunes says that you have to have icloud backup off. My icloud "button" is a whiteish green and does not respond to touch. I can't turn it off.

  • Wifi does not work correctly on iPad Mini w/ Retina display

    I've found that Wifi does not work properly on the iPad mini w/ Retina display.
    Some background: I own three iPads (iPad mini w/ retina display, iPad mini, and iPad 3rd gen), an iPod touch 5th gen, and a Macbook Air, and use them all frequently with my pocket Wifi router.
    None of them exhibit any Wifi problems whatsoever except for my iPad mini w/ retina display.
    Here are the details:
    In the middle of using Wifi with my pocket Wifi router, the Wifi connection will abrubptly drop, then reconnect. After the Wifi reconnects, it is no longer able to connect to the internet (even though Wifi itself is connected).
    Once the iPad mini w/ retina display's Wifi gets into this state, the following may or may not restore WiFi temporarily:
    Restart the device
    Reset network settings
    Yet, even if connectevitiy is restored, the problem will happen again within minutes.
    When the iPad mini w/ retina display gets into this state, the Wifi on my iPod touch, other iPads, and on my Macbook Air work perfectly fine, so I know the problem is not with my Wifi device or it's connection, but specifically with the iPad mini w/ retina display
    Note:
    The iPad mini w/ retina display never has any issues with my home or work Wifi networks. The problem only happens when connected to my pocket Wifi device. Yet, all of my other iOS devices and my MacBook Air work perfectly with my pocket Wifi device, therefore I know the problem is not with the pocket Wifi device, but with the iPad mini with retina display.
    Solutions:
    Resetting the iPad mini w/ retina display to factory settings does not solve the problem
    Resetting network settings on the iPad mini w/ retina display does not solve the problem
    I have even replaced my original iPad mini w/ retina and got a new one. Yet, the new device exhibits the exact same behavior as the original device.
    Conclusion:
    I know this is not a hardware problem (since it happened with both my original as well as replacement device).
    I know this is not a problem with my pocket WiFi router, since it works perfectly with all of my other iOS devices and MacBook Air.
    Therefore, this must be a software / firmware bug with the iPad mini w/ retina display. Apple will need to fix this in a future software update.
    Has anyone else seen this problem?

    I too have experienced this issue over the past two days... I have a 16gb ipad mini retina, for reference. I bought the device one week ago, and had not experience any issues at all until bringing my device to work. I logged into my work's enterprise level wireless network both yesterday and today, maintained normal wifi capabilities for 2-4 hours each day, and was then randomly dropped, both days. I tried hard resets, resetting my network settings, airplane mode, etc. Nothing has worked. I am still offline on my ipad mini retina.
    My iPhone 5 is sitting right next to my iPad mini retina. The iPhone is currently connected to the same very network, and has been for the past two years. I have never lost connection on my iPhone's wifi, just my iPad mini retina.
    This must be some kind of bug, as it does not sound like a hardware nor network issue.
    Hopefully they fix this in 7.1.

  • My WiFi is not working on my ipod touch third gen. The wifi option in setting is blanked out so i am unabole to select it. I have tried restored it and resetting network connections. Also the battery life is very low.

    My WiFi is not working on my ipod touch third gen. The wifi option in setting is blanked out so i am unabole to select it. I have tried restored it and resetting network connections. Also the battery life is very low. How do i fix this????????????

    If a restore did not fix it, you have a hardware issue--possible bad wi-fi radio.
    Basic troubleshooting steps. 
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

  • Playbook after upgrading to 2.1.0.1917 WIFI is not working anymore

    Good day to All! 
    I really need help on how to resolve my issue on Playbook OS 2.1.0.1917. 
    After the OS updated to 2.1.0.1917 the WIFI is not working anymore. I did some work around but still not working. 
    I have tried to factory reset the Device but the device unable to proceed in setting up the WIFI because like i said its not detecting any WIFI connection around me at all. 
    Please help me on how to fix this issue. I hoping that someone will be able to help me regarding this issue. 
    Note: Done with the following work around. 
    -Changing router
    -Unsuccessful downgrade the OS version. 
    -resetted the device 
    -NOW i cant even us the playbook. 
    Please let me know how to fix everything to back to normal... 
    Thanks in advance for the help.... 
    Cheers!!!

    You said you used every way...  there are only 3 ways..  usb from cumputer cable...  standard wall charger through USB connection ( Mini USB port ) and the Magnetic quick charger which is the same as the quick charger docking station..   if the USB Mini port is  no longer valid ( look forward to that being the condition if not now , then soon )  this would be a result.   USB port is a slow charge anyways...  not the proper solution...  EVER.   The more use the USB mini mort gets the sooner it will be a non viable option...  should ONLY be used tor Balckberry Desktop conection use...
       Let us all know if this is the case..   you can buy an Magnetic quick charger or docking station ( which is pretty cool ) on e bay for 8 or 9 dollars..  Let us know how long you have had this unit and if you think you have abused the USB connection port... once you get the magnetic 3 pin connector to charge the unit.

  • TS1559 hi can anyone help my iphone 4s wifi is not working it is grayed out or dim but the is a wifi address on the about  menu.

    hi can anyone help my iphone 4s wifi is not working it is grayed out or dim but the is a wifi address on the about  menu.

    hello Masonti
    I  am not computer expert it happen to me. I think it is not working for a  touch on/ off so you have to push using your finger and  hold and open  to the right (like when you open a door). That worked for me I call it  mannual opening. I did not get any help so I figured out the hard  way.Let me know but I am for sure
    yeee haa

  • My wifi is not working. It has no indication. I am living in Indonesia but I bought my iphone from apple online store. Can anyone help me how to fix my problem?

    My wifi is not working. It has no indication. I am living in Indonesia but I bought my iphone from apple online store. Can anyone help me how to fix my problem?

    The No Service means there is a problem with cellular service. You mention wifi in your title. Which is it you are having trouble with? What happens when you switch on and off as you state in your post? Are you saying that wifi does not connect while at home either?

  • Network controller​, pci device, wifi drivers not working

    my device model is dv6-6121tx
    i am not able to install network controller and PCI device drivers...
    also my wifi is not working..
    no wireless adapter in device manager..
    please help...
    This question was solved.
    View Solution.

    Hello again samyak.  You are very welcome!
    The first device (the virtual adapter) is virtual network which allows you to use the computer as a "software router."  Unless you're using this PC as an Access Point this device is useless to you.  This article has more information on the service.  Your best bet is to just disable it.  Try the following.
    Click Start, go to "All Programs," and select "Accessories."
    Right click on "Command Prompt" and select "Run as Administrator."
    Type the command "netsh wlan set hostednetwork [mode=disallow] and press Enter.  This should disable the virtual adapter.
    Exit Command Prompt, reboot the computer, and verify that the device is no longer listed.
    The device with the "ACPI/HPQ0004" ID actually returned two results.  The first was the Quick Launch Button software.  The other was related to Hard Drive Protection.  Try this driver.
    Make sure to reboot after all of these instructions have been completed.  Then go back to Device Manager and verify whether everything looks as it should.
    Continue to have a great day!
    Please click the white star under my name to give me Kudos as a way to say "Thanks!"
    Click the "Accept as Solution" button if I resolve your issue.

Maybe you are looking for

  • Help needed in Derived Table

    Dear Experts, Can anyone tell me in which scenario we will go for derived table?  We are creating a report on top of a Cube, Thanks, Kind Regards, Sathish Kumar.N

  • Running authroware from pen drive

    A user wants to run authorware from a pen drive. I had created a folder for the user, which contains published authorware with runtime exe. I've tested this on my pen drive it seems to work ok, by copying the folder onto the pen drive. He says he did

  • Working with Free-Run Timecode

    We have a multi-camera event coming up which will consist of 3-4 cameras. There is downtime between each segment that we are covering and I'd like to set each camera to free-run timecode so I can synch them in post. The Free run will be manually set

  • Importing HTML with Javascript

    Hi folks, I have multiple (but simple) HTML forms that need to be imported as they are. Basically, I want to avoid the work of editing each button's Javascript manually in Acrobat, so I have the form ready in HTML with some JavaScript. Each form butt

  • "no attached graph model or graph model is null" - error message

    Hi, When i try to ceate a inbound file adapter for customer data tutorial , i get the floowing message *"no attached graph model or graph model is null"*, My jdeveloper version is 10.1.3.4.0.4270