WiFi doesen't work on my new Satellite L850-13Q

I just bought an Satellite L850-13Q and my WiFi doesen't work. Win 7 64bit and I installed the Atheros driver for this system but it tell There are no aviable connection, but my old computer find a lots of them.
I turn it on with the FN+F12 keys, and the orange led is light. What can I do?

Hi
Did you mean the right indicator?
There are three LEDs in the front of the notebook.
The last one (the first from right) is an WLan indicator.
If this is ON, then the WLan should be enabled.
The notebooks WLan supports the 802.11 b, g and n standard.
Is your WLan router configured for b/g or n?
I think you should additionally try to configure the WLan again.
Go to control panel -> Network & Sharing center
On the left choose Manager wireless networks
Now press Add and configure the new WLan.
Ensure that you typed right SSID (wlan name), encryption and encryption password

Similar Messages

  • Satellite L850-13Q cannot write DVDs

    Hello!
    I recently tried to write several DVDs without success. It is a problem that occurred several days ago, out of the blue, since a long time has passed since I last wrote a DVD. I tried several DVD brands, so the DVDs are not the problem. I also used several DVD writing programs (Ashampoo, Nero, ImgBurn), none of them worked. I do not receive any errors during the writing process, in fact, everything runs as it's supposed to. What is more, the disc surface is visibly written.
    But when I insert the DVD, Windows sees it as a blank DVD. I am using Windows 8 (the writing used to work just fine before, also under Windows 8) and I am most certain that no harmful change to the operating system has occurred, since I also performed a clean install of Windows, the result of the writing being the same.
    Satellite L850-13Q DVD Drive (TSSTcorp CDDVDW SN-208AB)
    Help?

    Have you checked burned DVDs on some other PCs? Are all of them recognized as blank discs?
    What is with CDs? Have you noticed the same problem with burning data on empty CDs?
    It is really strange issue and it is not easy to say what the problem can be. If I understand you right the same problem persists with clean OS installation (factory settings), right?

  • Distorted picture or a split screen on Satellite L850-13Q

    Hello,
    i have a Toshiba Satelitte L850-13Q from December 2012, last month i send the laptop because the GPU maked problems, they changed my Motherboard.
    Some weeks worked perfectly, but now i have some problems like before, i recorder sometimes when this it's happening and i upload on youtube, look here: http://www.youtube.com/watch?v=qiMC5QQzoSs&feature=youtu.be
    What's happen, why this Laptop have the production discontinued, look: http://www.toshiba.com.ro/discontinued-products/satellite-l850-13q/ that laptop, i think this laptop it's comes from factory with gpu problems.

    I saw your short movie and must say GPU is acting crazy. Sorry but I think you must contact service again and ask for help. They must help you with this.
    What you can try is to connect your notebook to external monitor, switch to external device only and make the same test, just to see if the same happen again. I presume the result will be the same and it is definitely GPU related issue.

  • Satellite P50t-B-104: - WiFi doesen't work well

    My new Satellite P50T-B-104 has an Intel dual band wireless-ac 3160 adapter.
    Wi-Fi and also Bluetooth is supported by this adapter.
    Bluetooth is running well.
    On the Wi-Fi side there is no network in the connection list, although in our neighbourhood area there are a lot of private networks.
    So first I updated the adapter (now driver 17.0.5.8 from the Intel homepage) but nothing change.
    Then I tested it with my smartphone as a mobile Wi-Fi-Hotspot. I only receive a Wi-Fi signal, if the Wi-Fi sender is direct (max 10 cm) near the notebook.
    It`s more a NFC than a Wi-Fi functionality.
    If I placed the Wi-Fi-Router on the keyboard of the notebook Wi-Fi is running well.
    I suppose the Wi-Fi antenna has a failure or does a controller exist to regulate the Wi-Fi sensitivity?

    Hi xaver,
    there is no difference with or without AC power suply. There is no problem to connect to my router, the problem is the poor possible distance between notebook and my WLAN router.
    When you start your WiFi functionality of your notebook for the first time your WiFi adapter present a list with all the possible WLAN networks in your neighbourhood. In my case normaly there must be six oder seven WLAN networks and one of this WLAN networks is my network.
    I also tested WLAN functionality with a USB WLAN stick. The stick was automaticly installed and recognize 6 different networks. The integrated WLAN adapter only one, my router and only by a distance of 10cm or closer.
    Now I placed the notebook in a distance of 1 meter from my WLAN router. The integrated WLAN adapter doesn't receive any network, the list of the possible WLAN networks for the integrated WLAN adapter is empty, while the wlan usb stick notify all networks.
    So I contact Toshiba service to get help.
    Gerd
    PS: I wrote the reply with the poor wlan connection.

  • Lenovo yoga 213 wifi card not working in the new laptop

    I purchaed lenovo yoga 213 from Best Buy Boston and have brought to India.From the day one,the Bluetooth and Wifi is not working.On taking to their authorised service centr-Hitech technologies they have tried to replace the wifi card but even they are not able to solve the problem.I am trying to contact Lenovo for replacement of Laptop,but there is no response from them.What should I do?

    Lenovo service centre has done all these after getting a replacement card
    from Lenovo and again they have reported that the wifi replacement card
    recieved is defective ,so they have asked for 2 nd time replacement of
    wificard as well as the touchpad which they say carries the antenna for
    wifi.The bottom line is i am tired of running around to service centre and
    have not been able to use the laptop from the time i have bought the
    laptop.I thought if there is a manufacturing defect lenovo,being a reputed
    brand will replace the laptop.

  • Cooling fan is not working - How to disasemble Satellite L850

    How do you strip a Satellite L850 so as to get to the cooling fan and replace it. The cooling fan became noisy then stopped working and now the laptop is shutting down as it gets too hot.
    It is out of Warranty now as well.

    Hi
    Cooling fan replacement is pretty complicated procedure. Whole notebook must be disassembled and, as you probably know, it should be done by authorized personal only.
    Fact is that notebook disassembling procedure must be done by specific order to avoid some damage. Many plastic parts have small plastic holders and if you dont know how to remove certain part can be broken. The whole disassembling procedure is described in maintenance manuals but this document is not a public document and cannot be downloaded.
    What to say at this point? You can try to disassemble your machine but you will do this on your own risk. If you dont have experience with this I think it is not so good idea.
    Do you know someone who can help you with this?

  • Touch Pad stopped working on my new Satellite C850

    I have new Toshiba Satellite C850-b293 after a day may touch pad didn't work.
    Can somebody help me? I check already the setting and I set into default, but still now changes.
    Please help me....

    On this virtual way it is not easy to help. We dont know what is wrong there.
    Please be sure touchpad is enabled properly. Use FN+F9 key combination and be sure touch pad is enabled properly.
    > I check already the setting and I set into default
    I dont know what do you mean with default but if possible reinstall OS again and test touchpad functionality with clean preinstalled OS and factory settings.
    How to do this you can read on http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm

  • Satellite L850 running Win 8 - Cannot get BT working

    Hi,
    just bought a new Satellite L850 running windows 8,
    Can not get Bluetooth working.
    I have downloaded Bluetooth driver and BT stack, driver seems to install ok but still no Bluetooth anywhere too be seen. The BT Stack for Toshiba tells me that it will not work with my operating system.
    Can not find a download of BT stack for windows 8.
    need help with this one
    Thanks

    According notebook specification your notebook has BT but originally it was delivered with Win7 so I presume with Win7 there is no problem.
    Ive also checked support for your notebook model and obviously it is not supported for Win8 and drivers are not listed for this machine.
    Have you used Win8 drivers offered for other models?
    Maybe stupid comment now but I recommend you to stay with Win7.

  • Satellite L850-B162 USB 3.0 Problem

    I have a brand new satellite L850 with i7 3rd generation processor 6 GB of Ram and 750 GB HDD and AMD RADEON 2GB graphic card with 2 ports of USB 3.0. The problem is whenever i try to copy files from my external WD USB 3.0 HDD the system slows down and i can't even open google chrome page until the transfer finish. Plz help.
    Solved!
    Go to Solution.

    Can't hurt to reinstall this.
       Intel USB Driver for Windows 7 - 64 Bit, 1.0.1.209, 16/07/12
    -Jerry

  • HT1178 i am setting u a new time capsule. i already have a wifi setup in my office. now i want to use this time capsule just as a wireless backup machine. do i still need to attached a DSL cable, or it can connect to my existing wifi and start working ?

    i am setting u a new time capsule. i already have a wifi setup in my office. now i want to use this time capsule just as a wireless backup machine. do i still need to attached a DSL cable, or it can connect to my existing wifi and start working ?

    You probably can, but this type of configuration is not recommended or supported by Apple.
    Two cautions if you want to try this:
    1)  The Time Capsule has to be configured to "Join" your existing wireless network in this type of setup...and to do that, you must know the exact type of wireless security that your network is using.
    2)  Backups are likely going to take twice as long. The wireless signal must travel from your computer to the wireless router and then from the wireless router back to the Time Capsule.  Two "hops"......even if the computer is located close to the Time Capsule.
    If you want to try this, we can tell you how....but with no guarantees on your results....since this is not officially supported.

  • I cannot get GPS Only to work on my ipad3 (4g version, but not on an active cell plan, and wifi off).  Is there some new requirement in 7.1 or 7.1.1 to have cell and/or wifi enabled for GPS to work? I am testing with MotionX

    It seems like I cannot get GPS only to work on my ipad3 (4g version, but not on an active cell plan, and wifi off).  Is there some new requirement in 7.1 or 7.1.1 to have cell and/or wifi enabled for GPS to work? I am testing with MotionX, garmin blueChart mobile, and a GPS monitoring tool. All show no signal. If I turn on cell and wifi,  it says I get gps signal, but can't tell if that is from the GPS chip, or just from cell and wifi only (maybe with some gps mixed in)?  Any ideas on how to get iPad working with GPS only??

    Roger that.  Thanks for your time.
    System:
    Windows 7 64bit
    Processor: AMD phenom IIX4 965
    RAM:  Gskill Ripsaw F3-12800CL7D-4GBRM (2-2GB sticks)
    GPU:EVGA Classified Nvidia GeForce GTX 560 Ti 448 core
    PSU: Kingwin 1000W laser gold (LZG-1000)
    Yes. tried the one ram stick, no go.  I have been trying to boot off/install the windows 7 disk but am unable to get to the point where windows starts installing after its gathering information portion of the install.  I can get to the disk selection screen of the install with the WD HD on SATA port 2 but then get the "cant install messages" when I try to select the Vertex 3.  Yes I can see the Vertex 3 Drive as well as the WD drive at this point.  some times I have to hit "scan" a couple of times.

  • TS4062 My Iphone won't appear in my devices in Itune.... And the WiFi does not work on my phone.... I seems like there is no solution to update my phone to the new ios on my computer or WiFi without using the 3g because of this!!! help me out

    My Iphone won't appear in my devices in Itune.... And the WiFi does not work on my phone.... I seems like there is no solution to update my phone to the new ios on my computer or WiFi without using the 3g because of this!!! help me out

    Hello there, TempestBelcher.
    It seems you've covered all the bases, but feel free to review the iPhone Troubleshooting Assistant for connectivity here:
    Apple - Support - iPhone - Calls Troubleshooting Assistant
    http://www.apple.com/support/iphone/assistant/calls/#section_0
    If you've followed all the instructions then there are a few good recommendations for what to do next in the last step.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • Satellite L850-1?? - WiFi mouse doesn't work

    hi..
    first of all its my first time that i am asking a questions about my pc and i dont know very good english so i may have mistakes... moreover i am not a pc expert so if you try to help me be as simple as you can please... and i will begin the story
    i got a Satellite L850-1?? and i got one wireless mouse to the laptop... i got the laptop 1,5 year with the same mouse and i got no problems...
    yesterday the mouse stop working... i thought maybe its run out of batteries but thats not the problem i check on the internet and saw that maybe its a problem of the mouse itself or my usb ports have the problem... so i try to find the problem..
    i take another one wireless mouse and try it to my laptop.. no response with this mouse either... so i am positive that my ports have the problem.. i go to the device manager and check there and it say that my usb ports are working fine...
    so i try one wired logitech mouse that i got.. it was the same no response... but the device manager said that the ports were ok so i thought lets try those mouses to my father's laptop... i tried and no problem..
    so i am positive thats its someong wrong with my usb ports.. but i try a usb flash and the fun part was that the usb worked fine...
    so one the one hand decvice manager says thats usb ports work fine and my usb flash proves that but on the other hand 2 wireless and one wired mouse that working in other pc cant work in my usb ports
    do you have any leads to my problem?

    > is there a possibility to lock the ports only for the mouses?
    No, but if you attachdifferent USB device, the internal USB driver looks for the new attached USB device.
    It seems that somehow the USB driver cannot find the USB mouse.
    Would recommend you to check this MS knowledge base article how troubleshoots failure to find new mouse connected to your USB port:
    https://support.microsoft.com/kb/223256
    In worst you could recover the unit but to be honest this would be drastic workaround

  • My smart cover is not working on my new iPod 3 ( wifi 4g ) even the smart cover option is not in my setting menu but mIn my wife device it is working good would help me

    My smart cover is not working on my new iPod 3 ( wifi 4g ) even the smart cover option is not in my setting menu but mIn my wife device it is working good would help me

    The setting for iPad cover lock/unlock is in settings > general for iPad 2.
    The iPad 2 and new iPad if both are using iOS 5.x or later the setting exist in settings > general.
    So, if you worked at an apple store I think you should have known that the setting exist.
    You are right, a hard reset (force restart) should only be used if iOS device is unresponsive or apps crashing...etc.
    But, a simple restart helps as well.

  • Wifi is not working properly once i updated to the new operating system.

    My I pphone 4s wifi is not working properly once the softwere is updated to the new IOS.
    It shows the wifi but when selected its says "unable to connect". I tried connecting to many wifi networks but gives the same error message.
    Kindly advice how to rectify this

    I am trying that and itunes says that you have to have icloud backup off. My icloud "button" is a whiteish green and does not respond to touch. I can't turn it off.

Maybe you are looking for

  • File data view issue in Mainframe system

    Hi, I am generating an outbound Interface file to Mainframe system. Details about file -  It contains header of 15 bytes, data records of 1930 bytes and trailer record of 11 bytes. I am putting a carriage return at the end of each record( we are doin

  • Commitment value for service PR not appearing in 12ksta report

    We have two types of service PR-- COS & CCV. Although the PR is not deleted, its Deletion indicator in the COOI table in the COS PR is set automatically while same Deletion indicator is not set in the EBAN table.  As a result ZERO Value is appearing

  • Fixed a frozen zen v plus.... but now trouble Installing firmw

    Ok, first of all, I managed to fix the problem I was having earlier with the frozen zen v. If your player is frozen no matter how you try to manage it:?. reset it (by sticking a pin in the hole below the power?switch) if this fixes your frozen player

  • PC shuts down randomly

    Hi, I have a relatively new Computer (built it August 03). Worked fine after I got over the first NEO Bios Problems with fast Dual DDR. Lately i discovered, that my PC sometimes just shuts down and reboots. I'm not sure what exactly happens though it

  • How to exclude list of employess in the parameter?

    Hi I have one report that shows no on employeess, I want to do a parameter that help users to exclude some emp_no for the list , i wrote the parameter as emp_no no in :empno However i can wirte only one emp no in this case how can i let user to exclu