WIFI doesnt work after the windows 10 upgrade

hi i'm having a wifi problem once i've  upgraded to windows 10to be short , my wifi is disabled and i cant activate it neither manually ( Fn + F12 ) or authomatically (via windows )i tried to update my drivers ( they are all updated ) and the strange thing is that my bluethoot works perfectely !i'm having also a driver that says it is damaged it has a yellow triangle in it , this is its name ACPI\HPQ6001\2&DABA3FF&3thanks for your help

Finally I've solved it! I have a "HP Pavilion dv6 Notebook", I used to turn on/off mi WIFI with FN+FN12 combination in Windows 7. When I've installed Windows 10, I realized that this combination does not work anymore, it only enables/disables the Airplane Mode.  My assumption for the root of the issue is; if somehow if you forget the WIFI turned off during Windows 10 installation, it stays turned off from the BIOS, and if you dont have a hard switch (not a key combination) to turn it on you will not be able to turn it on via the keyboard, because FN+FN12 combination will not trigger it anymore.  For my Pavillion solution was (as someone mentioned it in the forums earlier) to load the default options from the BIOS, which will reconfigure your BIOS and WIFI will be "Hard Enabled" as it was in Factory Defaults. Don't forget to "Save and Exit" when exiting the BIOS menu.  Good Luck! 

Similar Messages

  • The multi level "isolation mode" don't work after the last upgrading to Illustrator CC 18.1.0? by the right mouse button menu

    PROVA

    Yes, I know that, but I ever work with the right mouse button,
    because selecting groups and subgroups with double click make some confusion for me.
    Regards,
    Fabio
    ufficio tecnico
    grafica e prestampa
    Via Verdi, 11 - 43058 Sorbolo (PR)
    Tel. 0521.694111 - Fax 0521.694360
    E-mail: [email protected] <mailto:[email protected]>
    E-mail: [email protected] <mailto:[email protected]>
    Web: www.litoexpress.it <http://www.litoexpress.it/>
    Il giorno 28/ott/2014, alle ore 06:57, Satinder S Bains <[email protected]> ha scritto:
    The multi level "isolation mode" don't work after the last upgrading to Illustrator CC 18.1.0? by the right mouse button menu
    created by Satinder S Bains <https://forums.adobe.com/people/SatinderSBains> in Illustrator - View the full discussion <https://forums.adobe.com/message/6874053#6874053>
    You can double click on the selected object to get into the multilevel isolation mode.
    Regards,
    Satinder
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6874053#6874053
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Illustrator by email <mailto:[email protected]m> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=33 67>
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0 <http://forums.adobe.com/thread/416458?tstart=0>.

  • Mail exchange stop working after the latest upgrade, how do you reboot it to restart again

    Mail exchange stop working after the latest upgrade, how do you reboot it to restart again

    Hmmm, here's the opposite problem/fix...
    Gmail send but not receive...
    Here are two steps that have come in handy in related situations
    1) login to gmail on your computer or device via a web browser
    2) once logged in successfully, go to this URL to unlock:
    https://www.google.com/accounts/DisplayUnlockCaptch
    Is your gMail POP or IMAP?
    If IMAP...
    Is the Outgoing server smtp.gmail.com, port 25, SSL on, & Authentication = Password

  • My hands free is not working after the ios7 upgrade, any solutions?

    I was paired and working fine with the blue tooth in my 2012 FJ Cruiser, after all of the ios7 upgrades it is still not working, kept thinking 7.0.2 thru 7.0.4 would have the solution but nothing yet. Has anyone found a solution?

    Hi, ramt14. 
    Thank you for visiting Apple Support Communities.
    Here is a troubleshooting article you may find helpful when experiencing this issue.
    iOS: Troubleshooting car stereo connections
    http://support.apple.com/kb/TS3581
    Cheers,
    Jason H.

  • Wifi doesnt work after updating to OSX 10.10.2 :( HELP PLZ ?

    Hello,i have recently update Mac from OS x 10.10.1 to os x 10.10.2 , unfortunately after installing this update wifi wont work anymore  though it shows that its connected to the network but when i open the browser and try to surf the net nothing happen and it doesn't load anything : ( though when i enter to the safe mode wifi works just fine * any suggestions ? Help please : ( * P.S i have Macbook air 2014 , 13inch , 256Gb

    Wi-Fi Problems in OS X Yosemite
    Wi-Fi Problems in OS X Yosemite (2)
    Wireless Diagnostics
    Also try turning off Bluetooth.
    Wireless Connection Problems - Fix
    Wireless Connection Problems - Fix (2)
    Wireless Connection Problems - Fix (3)
    Wireless Connection Problems - Fix (4)

  • Existing passcode doesnt work after iOS 7 upgrade

    Absolutely riduclous from apple, why wont my passcode work after upgrading to ios 7 on an iphone 5?????????? sort it out apple please, can restore iphone because find my iphone is activated on the device.

    We are not Apple we are users like you press power button & menu button hold both down until you see Apple Logo
    then wait you will not lose any data also turn you modem off for 30 seconds then after modem has started up
    try to connect iPhone .
    bsydd uk

  • Phone not working after the software upgrade

    I performed the software upgrade as indicated by the phone in the notifications.
    One the phone rebooted, I proceeded to enter my email accounts and it froze on a white screen with a spinning wheel.
    I rebooted and it continued to freeze.
    I took the battery out, rebooted, still can't add email accounts.  It freezes in the setting section.  I actually can't change any settings.
    If I reply to a text, the screen freezes black.
    If I try to reply to an email, the screen says, "Could not display this message"
    I have wiped it three times, powered off a billion times and still keeps freezing.  The update has been nothing but grief. 
    Any advice??

    Hello 2canoes and welcome to the BlackBerry Support Community Forums.
    Sorry to hear you're experiencing issues with your device after updating your software.
    It's recommended you contact your mobile service provider for investigation on this matter and to open a support ticket with BlackBerry technical support.
    Thanks!
    -HMthePirate
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Apps Not Working after the Lollipop Upgrade on the Galaxy Note 4.

    I did the lollipop upgrade on my Galaxy Note 4 and now I cannot get my Yahoo mail app or my GEICO app the work. I have uninstalled both apps and reinstalled them to no avail. Any help would be greatly appreciated.

    Certainly understand the importance of applications Markjen2525! What happened when you uninstalled the apps and then resinstalled them? Are they giving you any error messages? Please share details, thanks!
    KristieQ_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • Lenovo Yoga 2 Pro: WiFi doesnt work after driver upgrade

    After experiencing Wireless issues I tried to upgrade my Lenovo Yoga 2 Pro 13" with Windows 8.1 64Bit to the latest drivers from the lenovo support site.
    Ever since I cannot connect to the WLAN anymore. What puzzles me is that the driver status in the device manager shows a different driver version than what I have installed (uninstalling the driver and reinstalling it doesn't change anything here).
    What puzzles me is the Lenovo Website shows driver version 16.6.0.8 (released 25.Jan.2014, see link below), whereas my system display version is 16.6.2.1 (dated 31.10.2013). Hence I thought I have another version from somewhere else on my and removed all driver versions I could find.
    Checking driver details I get the follow file versions:
       C:\windows\system32\drivers\NETwbw02.sys    version 16.6.2.1 Intel, dated 2011
       C:\windows\system32\drivers\Netwfw02.dat       no version or publisher
       C:\windows\system32\drivers\vwifibus.sys          version 6.3.9600.16384 Microsoft
    Still, whenever I deinstall the driver, install the files from lenovo and click "Detect new device" my system pulls the drivers as listed above and is incapable of connecting to any WiFi.
    Windows 8.1. shows no connections available and doesn't connect anymore.
    How can I get my WLAN back?
    regards
       Florian
    Lenovo Driver URL: http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS039994
    Solved!
    Go to Solution.

    hi Florian,
    If Windows Update is configured to automatically fetch updates from Microsoft then the machine most likely have installed the Intel driver update for Intel(R) Wireless N-7260 as discussed in this article (which explains the different driver versions).
    Things that you can try:
    1. If the machine comes with the Intel(R) Wireless N-7260, navigate to:
     - Device Manager 
     - Network Adapters 
     - Intel(R) Wireless N-7260 (right click > update driver software) 
     - Browse my computer for driver software
     - Let me pick from a list of device drivers on my computer (you will then see a list of drivers, check if you have the version 16.6.0.8 from Lenovo and choose it and observe.
    2. Restart the machine and boot into the BIOS (by pressing F2 on the Lenovo screen). Once you're in, navigate to the Configuration Tab and ensure Wireless is set to Enabled (if applicable).
     - Link to picture
    3. Perform a System Restore and choose a date before the issue began. (this will restore the unit to an earlier point in time where wireless connection is working fine)
    4. Perform a Refresh / Reset or press the OneKey Recovery button (this will restore the unit to factory settings - ensure that you backup important files first).
    Regards 
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • DVR Search Option No Longer Works - After The Crap Upgrade

    The new software upgrade is crap. DVR search option no longer works. I can't use the search option to find my favorite programs and set the DVR to record them. It only lets me put the first letter in the search field and then nothing. I can't enter any more letters aftet that.
    Verizon sent me another DVR but it has same issues. They sent a technician to my house and he basically told me, the upgrade is crap and lots of people are having technical issues.
    He gave me another box and said it is working. Now I have three DVRs sitting in my house and I have to return two. After he left I tried to search and I have the same exact issue so basically he just lied and didn't fix anything.
    I called tech support over and over, and they just told me that they can't do anything. They basicaly admitted that the upgrade is crap and the are clueless on how to fix it. So I'm stock with 3 DVRs that don't work. Billing department told me they can't give me any discounts either.
    Anyone else is having these issues?

    Same issue here.  Sent me another box, same model as the old one.  Same exact issues.  Called Tech support back, they admitted it was a known issue, and nothing he could do about it.  Was told I had to talk to someone in SALES to get them to send me a newer box.
    New box is here, and now i have no option to record.  Oh, and last time I called tech support... I got 'disconnected' (after being on hold for 30+ minutes).  They are really dropping the ball, and I will not be renewing.

  • Wifi stops working after Wiindows 10 upgrade

    Probably Broadcom BCM 43142 802.11bgn Wifi Adapter driver not adapted to work together with W10

    I cannot find one for Windows 10, bookmark the page below and check from time to time to see if they post one http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-15-p200-Notebook-PC-series/7486459/model/7835198#Z7_3054ICK0KGTE30AQO5O3KA30R1

  • Toyita Bluetooth doesnt work after 10.3 upgrade

    I'm so frustrated and looking to get rid of my BlackBerry if I can't get this resolved.
    Since the new update that added android features my Bluetooth in my 2015 Rav will not work properly. The calls work but not the messages.
    What's most frustrating is that I cannot even pull the car over to use my text on my phone because the text option is frozen. I have to shut my car off and wait about 3 minutes to return a text.
    I really liked having the option for send a default message but that was short lived.
    Please help as I've already discussed moving to Android and it's the last thing I want to do!!

    Hello, I cannot tell you if what you are trying is supposed to work or not...I have no access to any documents that would discuss if the specific compatibility you need is supported or not. But, the most common thing to do after an update that results in issues is to perform an OS reload. Sometimes, the update processes have errors and such...with a reload often curing the issues. The official methods, which will be controlled as to what exact OS versions you are offered:http://supportforums.blackberry.com/t5/BlackBerry-10-Functions-and/How-to-Reload-your-Blackberry10-O...The unofficial methods, which are cleaner, and allow you to choose an OS version that perhaps your carrier (or whoever it is controlling your offers) has been slow to approve:http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...http://forums.crackberry.com/bb10-leaked-beta-os-f395/bb10-os-archive-943672/Of course, before you start any of this you will want a good backup via LINK, a manual copy of your Device Memory to your PC, and full documentation of your configuration (account credentials, added apps, configurations, etc.). Sometimes, restoring from a backup returns to the device the very corruption one needs to eliminate, and reconfiguring from scratch can resolve that. Good luck! PS...you'll need further to understand what the OS version nomenclature is...it is quite important both to those who would wish to help you here as well as some of the methods by which to try and fix it. First refer:Article ID: KB23393 How to find the model number and OS version on a BlackBerry smartphoneThe OS is always 4 octets, never merely 2, and that matters a great deal due to the fact that the offer for updates to an individual user is controlled most often by their carrier. So, one carrier may be quicker than another to release an OS that they all received from BB, making specificity of the actual 4 octet level important to the understanding by others. Further, here in this site as well as the unofficial methods provided above, it's the actual OS level that matters...Software Release is only useful to BB, the carriers, and the official methods...all others use OS for these purposes. We all wish the difference didn't exist, but can do nothing to change that fact. Cheers!

  • HT202664 my iphoto is under an old apple ID, how do I upgrade using my current ID? The current Iphoto is not working after the software upgrade. If I delete the iphoto app will i lose my photo library?

    I have a MacBook pro I recently upgraded to OSX. iPhoto is now not working as it was purchased under an old apple ID and I cant find a way to use my current ID to upgrade it. Also if I delete iPhoto to then repurchase it, will I lose my photo library?

    1. iPhoto won’t run any differently based on the Apple ID it’s associated with, but can only be updated from that one.
    2. No. Back it up anyway.
    (117179)

  • The scroll button on my mouse suddenly stoped working after the recent upgrade in firefox

    about 6 weeks ago, the scroll button on my mouse quit working when using firefox. It works fine with explorer

    about 6 weeks ago, the scroll button on my mouse quit working when using firefox. It works fine with explorer

  • I recently installed Bootcamp and Window 7 ultimate and the sound doesnt work on the windows side of the partition whats up

    Computer is late 2007 MacBook Pro 15 inch Processor 2.16 GHZ Intel Core 2 Duo
    Mac Traker says it can run Lion but I have had no luck

    Just a guess, but if your wireless network is not appearing in Windows, it's probably a result of a Windows firewall setting.
    An Apple AirPort Base Station just creates a wireless network, like any other. There is nothing different about it than any other wireless network, so it should be available to select from Windows. It has been a while since I've used XP but I am quite certain no additional drivers need to be installed for XP to communicate with a Mac's wireless hardware.
    You might try asking in the Boot Camp discussions area.

Maybe you are looking for