Wifi doesnt work after updating to OSX 10.10.2 :( HELP PLZ ?

Hello,i have recently update Mac from OS x 10.10.1 to os x 10.10.2 , unfortunately after installing this update wifi wont work anymore though it shows that its connected to the network but when i open the browser and try to surf the net nothing happen and it doesn't load anything : ( though when i enter to the safe mode wifi works just fine * any suggestions ? Help please : ( * P.S i have Macbook air 2014 , 13inch , 256Gb

Wi-Fi Problems in OS X Yosemite
Wi-Fi Problems in OS X Yosemite (2)
Wireless Diagnostics
Also try turning off Bluetooth.
Wireless Connection Problems - Fix
Wireless Connection Problems - Fix (2)
Wireless Connection Problems - Fix (3)
Wireless Connection Problems - Fix (4)

Similar Messages

Photoshop CS5 - colour settings in Print menu not working after update Mac OSX maverick

After upgrading to Maverick OSX on the iMac printing from CS5 via Epson R3880 is not working correctly. In Print Settings menu the drop downs for Colour and Colour Settings are greyed out. I already re-installed PS and installed the new drivers from epson. Any ideas?

but after choosing PS manages color, the options in the print menu for choosing color (color or b&W) and color settings are not available anymore. They used to be the last three years I printed with photoshop/epson 3880.
Instead they are greyed out now.
attached screenshot:
Op 30 mei 2014, om 01:47 heeft Chris Cox <[email protected]> het volgende geschreven:
Photoshop CS5 - colour settings in Print menu not working after update Mac OSX maverick
created by Chris Cox in Photoshop General Discussion - View the full discussion
If Photoshop managed color, then the controls in the printer driver are supposed to be grayed out - that's how Apple specifies drivers to work (because only one party should be managing the print color).
So what you're describing is perfectly normal.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6420209#6420209
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Adressbook doesnt work after update to 10.7.3 PB says your adressbook is 5.0.3. Can anyone please help?

Adressbook doesnt work after update from Snow Lepard to Lion 10.7.3 PB says your adressbook is 5.0.3.
PB says You have adressbook 10.5.3, yes, but now?
Can anyone please help?

Use the copy of AddressBook that is in your Applications folder, not the one on your Dock that's linked to a transplanted copy of the prevoius AddressBook App.

The front camera of my iPad 3 doesnt work after updated ios7

The front camera of my iPad 3 doesnt work after updated ios7

Have you tried closing the Camera app completely and seeing if it works when you re-open the app ? From the home screen (i.e. not with Camera 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
If neither fix it then you could try contacting Apple.

Ios 7, camera doesnt work after updating, iphone4

My iphone 4 camera doesnt work after updating on ios 7

completely erease the ipad and reinstall the OS.
Go to settings>general>reset>erease all content and settings. Wait for the ipad to finish then see if it works.

TS3103 I have aol and cannot acesss my email after updating to osx 10.6. the help says that I need mail 4.6. I have 4.5. How do I get the correct version?

Ihave aol and cannot acesss my email after updating to osx 10.6. the help says that I need mail 4.6. I have 4.5. How do I get the correct version?

Run all software updates.
http://support.apple.com/kb/TS4424

TS3048 Number pad on extended keyboard stopped working after updating to OSX 10.9.1. Testing keyboard on old system still works perfectly.

Expanded keyboard stopped working correctly after updating my system from OSX 10.8.6 to OSX 10.9.1 and now 10.9.2. The keypad numbers do not work although the numbers along the top of the keyboard work fine. Moving the keyboard back to computer still using 10.8.6 and it works fine.

See if zapping the PRAM works. Check out KB Article: http://support.apple.com/kb/HT1379 Resetting your Mac's PRAM and NVRAM

Why doesn't Wifi Sync work after updating ITUNE?

Hello, I updated my Itune to 11.1.4.62 version.
After updating, WIFI sync doesn't work anymore. I have to connect the cable to my laptop to sync it. Before this upgrade it was working fine.
Now, I have Iphone 5. I run Windows 7.
I did all the recommended trouble shooting.
I disconnected the model and router and reconnected again.
On Summary page the Wifi Sync is CHECKED
I ran the diagnostic, but obviously it says iphone is not detected.
I reseted my iphone.
It still doesn't work.
How can I solve this matter and why does Apple have so many irrtating problems like this?

The passcode screen shows as usual but when I enter the passcode it says the passcode is invalid. This is the same passcode I have had for over a year, so I am sure I entered it correctly. I stopped trying before the phone was disabled though.
I've seen other similar posts but they mostly say connect it to my computer, start itunes, then restore. I haven't synced with itunes in a long time, not sure restoring it would be a good idea. I back up to iCloud much more frequently but can't remember for sure when I last did that either. I'm afraid of losing stuff in the process of restoring it.

Why did my vm/windows wifi stop working after updating to OS X v 10.9 Maverick?

Hi All!
Updated to OS X 10.9 and now my VM Windows 7 wifi stopped working. The WIndows doesnt even see the macine has wifi capability. Was working fine yesterday. Help!

Another user reported the same problem with VMware Fusion. Update it to the most recent version and update the VMware Tools in your virtual machine, or Parallels Tools or Guest Additions if you are using Parallels or VirtualBox

How do I get wifi to work after updating to ios 8.2?

I have a iphone 5: A 1429.
wifi was working great with ios 8.1.3.
I updated to ios 8.2.... and it says wifi is connected, but internet doesn't work for more than 2 minutes. I can turn it on and off airplane, and I can have up to 2 more minutes of internet. I have 3 other devices on the network, and all of them work perfectly and have the internet, so the issue isn't the network.
How can I get the internet to work on my phone?

Try going to Settings, General, Reset, Reset Network Settings. Once done, go back to wifi in settings and enter the router's password.

Disk Utilty does not work after update to OSX 10.8.4

I updated to OSX 10.8.4 on my Macbook pro and the update went smoothly.
However when I try to run Disk Utility the utility never starts and the right click menu says it is not responding. I have to force quit.

You would need to download and run again the OS X Mountain Lion Update v10.8.4 (Combo).
Go to: http://support.apple.com/kb/dl1659

Touch id doesn't work after update ios 7.1 APPLE PLEASE HELP!!!

Touch id scanner dead after update 7.1. Tried remove fingerprints but cannot add new fingerprint because the touch id scanner DEAD. Tried rebooting the device and touch id scanner still doesn't work. For somehow the scanner works when the iphone is charging even it works slower than before the ios 7.1 update. APPLE PLEASE FIX THIS!!!
FYI : I am not going to try backup and restore my 5s, for the last time i bought this 5s i already tried for 2DAYS and cannot restore my old iphone 5 data to my new 5s!! I give up and lost all my DATA! Cannot find any answer from apple support. REALLY DISSAPOINTED WITH APPLE!

https://discussions.apple.com/message/25162081#25162081

Itunes doesn't work after update 10.5 on windows7, any help?? Thank you!

After updating 10.5 itunes didn't work anymore. We uninstalled itunes and installed it again, nohing helped. Does anyone has any idea?
Thank you so far!

No problems, Might be worth a restart of the comp after you unistall itunes b4 you install the 10.5 itunes sorry i could help

Lenovo Yoga 2 Pro: WiFi doesnt work after driver upgrade

After experiencing Wireless issues I tried to upgrade my Lenovo Yoga 2 Pro 13" with Windows 8.1 64Bit to the latest drivers from the lenovo support site.
Ever since I cannot connect to the WLAN anymore. What puzzles me is that the driver status in the device manager shows a different driver version than what I have installed (uninstalling the driver and reinstalling it doesn't change anything here).
What puzzles me is the Lenovo Website shows driver version 16.6.0.8 (released 25.Jan.2014, see link below), whereas my system display version is 16.6.2.1 (dated 31.10.2013). Hence I thought I have another version from somewhere else on my and removed all driver versions I could find.
Checking driver details I get the follow file versions:
   C:\windows\system32\drivers\NETwbw02.sys    version 16.6.2.1 Intel, dated 2011
   C:\windows\system32\drivers\Netwfw02.dat       no version or publisher
   C:\windows\system32\drivers\vwifibus.sys          version 6.3.9600.16384 Microsoft
Still, whenever I deinstall the driver, install the files from lenovo and click "Detect new device" my system pulls the drivers as listed above and is incapable of connecting to any WiFi.
Windows 8.1. shows no connections available and doesn't connect anymore.
How can I get my WLAN back?
regards
   Florian
Lenovo Driver URL: http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS039994
Solved!
Go to Solution.

hi Florian,
If Windows Update is configured to automatically fetch updates from Microsoft then the machine most likely have installed the Intel driver update for Intel(R) Wireless N-7260 as discussed in this article (which explains the different driver versions).
Things that you can try:
1. If the machine comes with the Intel(R) Wireless N-7260, navigate to:
- Device Manager
- Network Adapters
- Intel(R) Wireless N-7260 (right click > update driver software)
- Browse my computer for driver software
- Let me pick from a list of device drivers on my computer (you will then see a list of drivers, check if you have the version 16.6.0.8 from Lenovo and choose it and observe.
2. Restart the machine and boot into the BIOS (by pressing F2 on the Lenovo screen). Once you're in, navigate to the Configuration Tab and ensure Wireless is set to Enabled (if applicable).
- Link to picture
3. Perform a System Restore and choose a date before the issue began. (this will restore the unit to an earlier point in time where wireless connection is working fine)
4. Perform a Refresh / Reset or press the OneKey Recovery button (this will restore the unit to factory settings - ensure that you backup important files first).
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Yoga 2 Pro wifi not working after update to Windows 10

Hi all, I just updated my brand new Lenovo Yoga 2 (13") from Windows 8.1 to Windows 10. But after doing so, I cannot establish any WiFI/W-LAN-connection! If I go to the settings for network adapters in the system settings, I even caanot find the wireless LAN adapter as if it was not installed at all! Can anyone help me? Is there any source for new drivers or something else to fix this?Thanks a lot and best regards from GermanyJohannes

We had the same problem of wi-fi not appearing at all in network connections, with a newly bought Lenovo Yoga 2 13 with Realtek wireless just upgraded to Windows 10, and after a lot of tinkering managed to get it working. We did three things at the same time, which between them fixed it:1. Installed the Intel Chipset drivers for Windows 10 (from Lenovo's support site)2. Did a HARD/FULL SHUTDOWN (hold SHIFT when clicking shutdown), bypassing Windows fast hybrid shutdown.3. Accessed the BIOS, turned Wi-Fi setting in the BIOS off and on and saved settings (there's a button on the side to access the BIOS) I suspect the combination of 1 and 2 fixed it (with the FULL shutdown being key!), because I can't see just accessing the BIOS doing much, but thought I would list all 3 just in case! Sorry for not being more specific, but I hope this helps someone!

Wifi doesnt work after updating to OSX 10.10.2 :( HELP PLZ ?

Similar Messages

Maybe you are looking for