Wifi driver doesn't work properly

HI,I've installed W8.1 instead of W7 but Wifi Dosen't work as a reight Way The Wi-Fi works for then depends on the work and then worked for againe
this affects my Job if i download anything,it stop loading continuesly.
I've tried W8 and the same problem but it works truely with w7.
what should i do for making it works truely with W8.1.
Sorry length of e-mail.

vn7571g_user,
Sorry to hear that you are not having the best possible experience with your new notebook. I'd like to try and address a few of your concerns that you have listed and see if there are some things we can resolve for you.
1. Wifi doesn't work properly:
I see that you have posted in a couple other threads (1st, 2nd) regarding wireless issues with this notebook. We can gladly check this unit at the repair depot for you if you are not keen on changing the card out, PM me the following information and I will see what I can do for you:
SNID or serial number
Contact name
Contact number
Email address
Shipping address
Purchase date
2. Wifi doesn't work after switching on and off 'Airplane mode'
If you have already tried to install/update the drivers, it could be a Windows issue. You can attempt a refresh to see if that helps resolve it.
3. Trackpad response is terrible
This notebook uses a precision touchpad possibly, but since it uses Synaptics drivers you have a couple options:
You can change the way that the touchpad works.
It says Windows 7, but you can see if you have this option in the touchpad settings and see if it helps you out.
4. Speakers jar
Do you have the same issue without the Dolby turned on?
5. Num-Lock is 'Off' after every sleep session
Here is a Microsoft article that discusses this feature. You can follow the steps that they list if you would like.
6. Keyboard-backlight setting is 'On' after every sleep session
The backlit keyboard is working as designed. Here is an article with some FAQ about the backlit keyboard to help customers understand its functionality a bit more.
A couple final thoughts:
Did the issue(s) you are having occur before or after Windows updates, sometime a bad installation of an update can cause all sorts of things to happen.
Worst case, you can always try to restore to factory defaults and test all these things before applying updates or installing any applications or programs.

Similar Messages

What can I do if my CD or DVD drive doesn't work properly in Windows 8?

QuestionWhat can I do when if my laptop CD or DVD drive doesn't work properly in Windows 8?
AnswerNote: For help with this issue in Windows 7, please see this article.
To get your CD or DVD drive working correctly, try these suggestions in the order listed.
Reinstall the Driver
Hold the Windows key and press the 'x' key to open a menu in the lower-left. In this menu, select "Device Manager." Expand "DVD/CD-ROM drives." Right-click the entry for the CD/DVD drive nested under "DVD/CD-ROM drives," then select "Uninstall." Finally, restart the computer. The computer will reinstall the drivers for the drive.
Power Cycle
Even when your laptop is off and unplugged, residual power can still be held in some components. While this is normal, clearing it can help with some hardware problems. Perform these steps to complete what’s called a power cycle.
Ensure the laptop is turned off.
Unplug the laptop's AC power cable.
Unplug all wires and peripherals. This includes CDs, DVDs, USB sticks, mice, printers, and any other accessories.
Remove the battery (if the model has a removable battery). If the model does not have a removable battery, check your user's guide to determine if you have a pinhole reset on the bottom. If you do, press this.
Hold down the power button for thirty seconds.
Reattach the battery if removed.
Connect the AC adaptor to the power socket that was confirmed to be working in the first step.
Connect the other end of the AC adaptor to your computer.
Start the computer and test the drive
Microsoft Fix-it
Your computer may exhibit one or more of the following symptoms:
Your CD or DVD drive no longer appears in Windows
Your CD or DVD drive does not read or write and is shown as disabled
The media in your CD or DVD drive cannot be read
The media cannot be written to a CD or DVD inserted into the drive
You receive an error message about your CD or DVD drive
If any of these symptoms apply to your computer, use Microsoft Fix-it troubleshooter available here.
System Restore
Try using System Restore to restore to the most restore point from before the problem arose.
How To: Understanding System Restore, Refresh, Reset, and, Recovery options in Windows 8 + Video
System Recovery
If the System Restore doesn't solve the issue, you could try a System Reset. Resetting your laptop to its original, out-of-the-box state is a great way to eliminate software as a possible cause of the problem. Note that doing a system reset will return the laptop to its default conditions, completely wiping your data. Information on how to perform a system recovery can be found in your user's guide.
For more information on performing a recovery, see the following article:
How To: Understanding System Restore, Refresh, Reset, and, Recovery options in Windows 8 + Video
Contact Customer Support
If the drive doesn't work after performing a recovery, it may be due to hardware failure. Please call customer support or seek servicing.

See this Microsoft article - http://support.microsoft.com/kb/314060/en-us For ways to fix manually
and/or use the proper microsoft fixit 8.1 and 8 or the other one for Windows 7, Vista, and XP listed below.
(these are from the Microsoft article)
Resolution 2: Use the CD/DVD Fix it troubleshooter
To automatically fix common issues with CD or DVD drives, click Run now, and then follow the on-screen instructions. Windows 8.1 and Windows 8
The Automatically diagnose and fix common problems with CD or DVD drives troubleshooter may automatically fix the problem described in this article.
                                This troubleshooter fixes many problems. learn more
Run now
Windows 7, Windows Vista and Windows XP
The Automatically diagnose and fix common problems with CD or DVD drives troubleshooter may automatically fix the problem described in this article.
                                This troubleshooter fixes many problems. learn more
Run now
If your problem is not solved, try the next
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

Qosmio G30 - New CD/DVD drive doesn't work properly

Hiya all
I'm hoping someone can help me. I have had to replace my TS-L802A drive with another of the same model, except that when I replaced the drive I have problems booting from CD and the laptop (Qosmio G30) rejects it by saying CD-ROM error on startup.
I managed to install the operating system from a flash drive and it works fine except for the cd rom side of things. Do I need to flash the drive in order for the laptop to recognise it? If so how do I go about doing this. I'm thinking that the chipset for the optical drive is set as slave or something and not master.
Please help!

the drive wont show in the bios, the bios is wierd, it wont show the model number or name of any devices. is there a difference between a setup and the bios or are they the same thing. i cant configure anything. i have my old drive working at the moment but its badly damaged although it still reads disks hence the reason i managed to install an operating system. are there certain drives set as master/ cselect/ slave if so is there a way to flash the drive to make it work with my toshiba qosmio g30. or can i swap the chipsets on the optical drive by disassembling the casing and swapping them over. i just want the thing fixed. thanks please help!!!

Qosmio G55-Q804 WIFI driver doesn't work Vista 32bit Ultimate

I have Vista 32bit Ultimate and everything is loaded and working great EXCEPT my internal WIFI adapter which is an Intel unit.
I would like to know if anyone else has dealt with this issue on this laptop? Is there something I am missing?
Why wont the driver take?
I am an expert IT admin and have handled many pieces of hardware in my life so I am not at a lost to try different tricks and all of them have not worked. If anyone can teach an old dog a new trick to get this to load I would be most apprciative.
Thanks in advance
Coogrrr

Your model has the Intel WIFI Link 5100AGN with the latest drivers version official from Toshiba are 12.0.0.73 and from Intel 12.1.2.1. The WIFI gets autodected by Vista and will by default install the official drivers. If it doesnt do so it can be 1 of 3 things:
1 The miniPCI isn't properly pressed into its socket
2 Software conflict by 3 party install
3 The miniPCI is just plain dead

OS update 2.1.0.1032 now my wifi connection doesn't work properly HELP

My wifi worked perfectly until the recent OS update. Now I can only get a connection to last for minutes before it stops working. The green wifi signal will show but it won't actually work.
Is there anything I can do? Try to reload the OS update. I don't know if it makes a difference but I accidentally pressed the standby mode button during the loading of the update.

I would say my receiver is 80% as sensitive as it was on 2.0 but had no problems frequently disconnecting and it reconnects as soon as I move back nearer. You should try the usual router changes...
Make sure if you are on 802.11n (wireless N) you have encryption set to WPA2 (AES)
Or change to 802.11g
Or debrick the playbook in extreme cases and reload the OS.

Elantech synaptics touchpad driver doesn't work properly for G570 on Win8

Hello, i got G570 laptop, at first i had Win 7 installed in it, i downloaded the touch pad driver for my laptop to use the scrolling feature of touch pad and it worked fine. Now i upgraded my OS to Win 8 and so i download and installed the touchpad driver for Win 8. The problem i am facing is that the scrolling feature no longer work on Win 8. Please suggest me a solution

I am having the same exact problem on my G580. Everything funtions perfectly in desktop mode, but in any metro app or the start screen scrolling does not work.

What can I do if my CD or DVD drive doesn't work properly in Windows8?

my computer is toshiba sattelite pro l300. It can not read CD, thought it can read DVD ok

See this Microsoft article - http://support.microsoft.com/kb/314060/en-us For ways to fix manually
and/or use the proper microsoft fixit 8.1 and 8 or the other one for Windows 7, Vista, and XP listed below.
(these are from the Microsoft article)
Resolution 2: Use the CD/DVD Fix it troubleshooter
To automatically fix common issues with CD or DVD drives, click Run now, and then follow the on-screen instructions. Windows 8.1 and Windows 8
The Automatically diagnose and fix common problems with CD or DVD drives troubleshooter may automatically fix the problem described in this article.
                                This troubleshooter fixes many problems. learn more
Run now
Windows 7, Windows Vista and Windows XP
The Automatically diagnose and fix common problems with CD or DVD drives troubleshooter may automatically fix the problem described in this article.
                                This troubleshooter fixes many problems. learn more
Run now
If your problem is not solved, try the next
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

Yoga 13: the Realtek RTL8723A new driver not yet working properly

After having faced lots of stability issues with my bluetooth mouse (Microsoft Sculpt Touch) I installed the new driver for the wifi/bluetooth chip RTL8723A (v1.04.0213 - 6th June 2013) and after having used it for several weeks, I have noted the following:
Bluetooth issue:
- Still several disconnection of my mouse (but slighty less than before)
- There is a general trend that my mouse connection is worser everyday (used to work better) - and not a problem of batteries
Wifi issue:
- If I activate the "plane mode" from windows 8 wifi bar, it's impossible to reactivate the wifi! I have to run the windows'internal utility to sort out the problem (right clic on the wifi bar from the desktop and "resolve problems")
- Sometime the wifi just doesn't connect properly (its connected on the router but there is no network) and I have to turn on the plane mode and do what I wrote above to make the wifi work again. But some time it doesn't work and I have to reboot
- Despite the "wifi hotspot mode" is implemented (the "netsh wlan start hostednetwork" command) and work it's so instable that it always end in crashing the computer and followed by a reboot (perfectly managed by Windows 8 at least). Anyway I managed to cope with that during my holidays (I used it to create another wifi network which was a network share of another wifi network to which I could only log in for one device (my Yoga 13) - so I used my "hostednetwork" to connect iDevices at the same time). But after several crashes and reboot, the wifi was so instable that I had to reinstal the driver
I have never faced so much bugs in a so basic but vital component of a laptop which is the network card. This card is already far beyond what we could expect of a laptop of this range (the wifi n is single band, no 300 nor 450 mbits speed! It's worse than any modern smartphone!) and has not a good sensitivity but in top the driver seems to have been written by beginners.
So Lenovo, please, do something and pressurise your provider (Realtek) so as they release a driver working correctly - or just don't use their cards and invest in better providers (like Intel which is doing great network cards with professional class software).

Sorry to hear about all your wifi issues. Unfortunately a lot of Yoga 13 owners are having problems, especially due to Realtek compatibility with specific router hardware. Just to see if things improve you might try some of the other driver versions discussed here:
The "Beta" wifi driver from diecast17 is a little older than the official June 6th driver but first improved wireless for many users: http://forum.notebookreview.com/ideapad-essential/640537-ideapad-yoga-109.html#post9180970
There is a slightly newer Bluetooth driver for another Lenovo product that also works for the Yoga 13 (per this forum thread, installs version 05/22/2013-1.3.744.3 vs. 09/06/2012-1.3.644.3): http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS034706

Satellite Pro L20 doesn't work properly with USB Fast Track audio i.f.

Hello!
I have used my Fast Track USB on new Toshiba Satellite L40 and I never had problems with it. I could set low latency and I did few songs with it.
Yesterday I bought another notebook, thinking of home recording studio. It's used Toshiba Satellite Pro L20. It doesn't work properly with my interface. When I listen music on Winamp or do anything on Fruity Loops I hear loud clicks, pops, noises. They introduce samples, or they appear during playback or after a sample is stopped.
I noticed, drivers for Satellite Pro L20 are a problem. Its not supported by Toshiba anymore?! The only drivers for chipset are very old and you can download em only from Toshiba website. The chipset is ATI Xpress 200M. Its drivers are with graphic card. Recently I noticed you can download "ATI Catalyst Legacy Display Driver for Windows XP - Motherboard/IGP Drivers 9.11" and CRACK IT to make it possible to install on mobile unit such as L20. Yep its funny but its impossible to do otherwise!
things I have tried and they still not help:
# drivers replacement, original were released in 2004. I installed recent version.
# driver settings, low latency, high latency
# asio and different settings
# pluging the interface to another usb socket.
# trying what happens when I use battery and when I use adapter
# updated bios
# turned off onboard units such as wifi card, sound card
# checked IRQ list
pops still appear.
my config:
Toshiba Satellite Pro L20
Win XP Home SP3
Celeron M 1,5GHz
896Mb ram
M-Audio Fast Track USB, drivers: 6.0.2
Kind regards

Thanks for answer. I still have L40 but I try to run my homerecording on L20. The L40 is now used by whole my family. It's possible to swap them but there's a problem - L20 has Norway keyboard and I'm the only person at home who doesn't often look down while typing. In Poland, we use standard ms keyboard. I'd buy special stickers, it's about only to make special chars get back to their places.
I installed Windows on this computer end set it to best performance possible.
Since I created this thread, guys from M-Audio support tried to solve my problem - nothing helped. I think potential solutions are exhausted.
Message was edited by: lidia.pochron

My wifi driver is not working with windows 8.1 in my MBA2013?

My wifi driver is not working with windows 8.1 in my MBA2013?
i installed windows 8.1 with bootcamp, everythigs seems to be working fine except the wifi,
please help me to solve this problem,,
thanks

neokenchi wrote:
hi erabbath,
Welcome to the Forums.
If you have the Intel Centrino N2230 Wireless + Bluetooth adapter, can you try to:
1. Navigate to the Control Panel (large icon view) > Devices and Printers and try to pair a bluetooth device (i.e. Bluetooth Headset) and observe if it gets detected under the device list.
2. If the Bluetooth Headset is listed but it's not working try toright click on it > choose Properties. On the bluetooth properties Window, go to the Services Tab and check all the appropriate bluetooth services.
Sample picture
Let me know your findings.
Regards
Thank you very much for your answer,
I went to Control Panel > Devices and Printers and i tried to add a new device as the bluetooth doesn't appear this is what i got. By the way the bluetooth was on.
Link to picture
And this is what i have on the Bluettoth
And it search endlessly whereas before the upgrade it was working properly,
All the drivers are up to date as well as windows updates are all installed
Thanks in advance for your help
Regards
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules

My Safari doesn't work properly after installing Lion. Don't like it, how can I uninstall? (Cloud not worth it)?

I upgraded ti Lion 10.7.2 for icloud but it's causing other problems with my mac. My Safari doesn't work properly anymore. Wishing I didn't upgrade, anyone know how to fix this or do i just have to uninstall? Thanks,

Wipe the drive clean and install Snow Leopard from your install disk.
Might be less work fixing Safari. Try Resetting Safari.

A65-S159 - I can't use the CD Recovery because my CD/DVD doesn't work properly

Hi, I need help to reinstall the system and drives. It's a Satellite A65-S159. The CD/DVD doesn't work properly. Rarely, the CD/DVD can read a DVD. So I can't use the CD Recovery. What may I do?
Thank you,
Cabula, Brazil

There are two ways to run the recovery DVD, one is from Windows. Instead power ont he computer with the disk in the drive. And imediatly after powering on start pressing the F12 key. After a few seconds you should see a boot device menu that you can select the CD/DVD drive to boot from. Try that and let us know if you got the boot menu, and if the disk worked.
This signature left intentionally blank.

Iphone4 doesn´t work properly in 3G mode

My iphone4 doesn´t work properly in 3G mode. Telefon calls break and telefone quality is poor. Internet is mostly not posssible. With 2G both (Telefone, Internet) work. The problem is not that vodafone net is poor because other smartphones work properly at the same location. Telefone calls often break with "no connection" even with 5 sticks. Internet speed is mostly poor, i.E, slower than 2G. It is definitly not a net problem. I think (not sure) the problems occures wit IOs 4.3.3

Thanks for your help Jeffrey,
But
- I checked with several USB audio devices, from different providers. The issue is the same.
- I checked with several applications (Winamp, MediaPlayer, ...). Same issue.
- I checked these devices with different laptops (tried 3 different models) : I have NO PROBLEM.
- The USB devices I use do not need external power supply. I tried EDIROL UA-25 which works perfectly in any case, but not with my TOSHIBA M40.
- I agree that some application can disturb audio management. But in that case, I would like to know which one from the standard installation is the cause, so that I can fire it. It's anyway curious to see that switching from ACPI to Standard mode fixes the issue, as all applications are still there. I would say the applications are not the issue, then.
- All Microsoft updates have already been installed
- I think I tried everything that could be done by closing applications, changing power management modes, system cache, ...
- I have no other hardware device connected/installed (printer or whatever)
- RECORD works perfectly. So if some application layer was disturbing, I would bet it would bother in Play and Record as well.
CONCLUSION : Unless someone can prove it (and I'm ready for some testing), I still believe there's a harware/driver layer that is faulty in the Toshiba management.
And I don't need to contact the manufacturer, as I AM one of them :)
If you are part of the Toshiba support, let me know. Maybe we can investigate together.
FYI : I had to create a new user ID for this forum as it did not accept the one I created this morning anymore :(
Thanks anyway.

Satellite P500-127: microphone or sound doesn't work properly using skype

Hi Toshiba team,
Recently bought a new notebook.
However the microphone or sound driver (connexant pebble high definition ) doesn't work properly when using skype. Also read about this matter in various forums such as the skype forum.
People encountered similar problems such as:
We can usually talk for a bit longer than 20 seconds, however the call will drop at a random time between 1 and 15 minutes. The strange part is that sometimes the quality of the call is good, but more than often my friend can only hear *half of what I am saying* while I usually do not have a problem hearing what has been said. The video will work so my friend can see me talking but can simply not really hear what I am saying.
Before the drop the call will usually freeze for a couple of seconds and then skype sometimes crashes. We have tried talking together without the video, however the problem remains.
I also found a suggestion by the toshiba service, just to simply increase the volume under control panel etc, but it doesn't work either..
Can you please help me on this one?
Cannot use skype at all as it just to annoying for everyone I talk to.. Quality is just to poor!!
Many many thanks
+Message was edited: link has been removed - not allowed+

Hi
Every day I use Skype with the internal webcam, microphone and speakers but I didnt have any problems as yet.
In your case I would try updating the drivers. Therefore download the latest sound and webcam driver (microphone is a part of webcam). Both you can get here:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
If your friend cant hear you, check also the settings for internal microphone. I have activated microphone boost in Windows sound settings so I could improve the microphone quality.
By the way: Do you use the latest version of Skype? With older Skype version I had also some problems on Windows 7. As far as I know only newest version is fully Windows 7 compatible.

My palm m105's touch screen doesn't work properly after a sync.

I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
My palm m105's touch screen doesn't work properly after a sync.
I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
Thanks in advance!
Post relates to: Palm m105
Post relates to: Palm m105

Maldoman578,
Let's help solve this mystery together! Is your screen freezing after every reboot? Is there any physical/liquid damage on the device? When did this issue begin? Did you notice this after a recent update or application download?
EfrainM_VZW
Follow us on Twitter @VZWSupport

Wifi driver doesn't work properly

Similar Messages

Maybe you are looking for