Wifi driver is not getting installed
I tried installing all the wifi drivers that are there in the network drivers given in this website for hp dv6 6165-tx .But the drivers are not getting installed.It is showing the message that "the driver could not be installed properly as it is not compatible with the current version of windows".What to do.Plzz help me out..
I upgraded my G580 (2689)to Windows 8 and had terrible trouble getting the wifi/bluetooth to work. I installed the driver 5.100.245.20 downloaded from Lenovo Support but it would not work at all. I went into the BIOS and reset to defaults and hey presto it began working! Strange really, as I had never been into the BIOS to alter anything. It may not work for everyone but must be worth a try eh?
Similar Messages
-
OKI 5500n driver does not get installed......
I tried it on Macbook Pro intel and MacPro xenon.
in os 10.5.3 the printer just stopped working!!!
When I install the new driver from oki.com It appears that is is getting installed properly but I can not find the driver. I created a separate folder but still does not get installed!!!!
Please help!!!I just got this working, after calling Okidata at 1-800-oki-data as someone suggested. I had tried installing all the drivers from the oki web site which apparently was not the best thing to do.
The final procedure that worked was:
1) Move Library/Printers/Okidata folder to trash and empty trash
2) Move all other folders in that Library/Printers directory, EXCEPT for PPDs) to a temporary directory on the desktop
3) Reboot
4) Install OSX5C5500E driver
5) Open System Preferences/Print&Fax
6) Click + to add a a printer
7) IGNORE THE OKI PRINTER THAT APPEARS THERE
8) Select "More Printers"
9) Under Oki USB, a printer driver will show up - choose that one.
10) Print - it works now!
11) Move other printer drivers back into Library/Printers
12) Enjoy using Okidata printer rather than buying lots of HP ink. -
When I plug in my iPhone to a USB port on the back of my computer I get the error "MTP USB Device driver was not successfully installed" and of course there is no device that shows up either. It would be great to download my photos! I'm using Windows
Go through this support doc:
OS: Device not recognised in iTunes
Windows: http://support.apple.com/kb/TS1538 -
My wifi driver is not working with windows 8.1 in my MBA2013?
My wifi driver is not working with windows 8.1 in my MBA2013?
i installed windows 8.1 with bootcamp, everythigs seems to be working fine except the wifi,
please help me to solve this problem,,
thanksneokenchi wrote:
hi erabbath,
Welcome to the Forums.
If you have the Intel Centrino N2230 Wireless + Bluetooth adapter, can you try to:
1. Navigate to the Control Panel (large icon view) > Devices and Printers and try to pair a bluetooth device (i.e. Bluetooth Headset) and observe if it gets detected under the device list.
2. If the Bluetooth Headset is listed but it's not working try toright click on it > choose Properties. On the bluetooth properties Window, go to the Services Tab and check all the appropriate bluetooth services.
Sample picture
Let me know your findings.
Regards
Thank you very much for your answer,
I went to Control Panel > Devices and Printers and i tried to add a new device as the bluetooth doesn't appear this is what i got. By the way the bluetooth was on.
Link to picture
And this is what i have on the Bluettoth
And it search endlessly whereas before the upgrade it was working properly,
All the drivers are up to date as well as windows updates are all installed
Thanks in advance for your help
Regards
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules -
During a deployment from wds i get the following error with windows 8.1 "windows installation cannot continue because
a required driver could not be installed".
Hardware : Gigabyte GA-Q77M-D2H.
I got image from installation Disc.
When the error occors this is the event in the admin-log on server 2008R2
The following WDS Client has encountered Fatal Error:
SessionGuid: {01208fe1-bb0c-49d6-9e32-0000da4897af}
MAC: 000C29D627F6
IP: 192.168.208.86
ClientGuid: {2f904d56-a52b-3220-a351-79ecd5d627f6}
Arch: 9
ErrorMessage: Windows installation cannot continue because a required driver could not be installed.
What to do?
Thank you in advance.Hi,
The problem is a unsuccesful installation of driver in the driverstore, the first step would be to ensure that you are using the latest driver for the hardware and operating system or you’re experiencing
compatibility issues with a driver.
Then I suggest pressing shift+f10, and type diskpart then lisk disk, view whether all disks work fine.
Regards,
Yolanda
Yolanda
TechNet Community Support -
Playbook OS 2.00 update - Video Chat not getting Installed in UAE ?
I Recently bought a playbook and immediately upgraded it to OS 2.0 via wifi. It got successfully upgraded but I am not having the video chat icon. I think this did not get installed with the upgrade. How do I get this installed ? Any idea ?
Hi tamils_siva
Due to content restrictions, the BlackBerry® PlayBook™ Video Chat application is not available in the United Arab Emirates.
Thanks
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)! -
Hello everyone,
Give you a little background on the hardware/software which we are running to do a Windows 8.1 Deployment, we have an VM of Windows Server 2008 R2 with Windows Deployment Services installed and configured correctly. For the boot image it's a Windows 8.1
WIM and as for the Install Image we have a base image of Win 8.1 with all drivers installed for an HP EliteBook 8540w , we Syspreped and then capture the image using the W2K capture on PXE to capture and upload the image to the server. This is where we first
ran into the problem of connecting to the server and had to inject the lan drivers to have network connectivity. After the image was uploaded to the server, we thought to try and run a deployment of that image on an identical laptop. PXE boot into that Image,
it asks for domain credentials which are accepted it begins the installation process and fails at "Windows installation cannot continue because a required driver could not be installed"?
We just set up client logging on the server and it is useless it just says that the driver is missing, but what driver is missing? There are thousands, which one?
Another forum has this issue: http://social.technet.microsoft.com/Forums/windows/en-US/4cf0b378-09d0-4e0b-bc6e-3d898b668f98/during-deployment-windows-installation-cannot-continue-because-a-required-driver-could-not-be?forum=w8itproinstallHi,
Please first check the solution here:
Error: Windows installation cannot continue because a required driver could not be installed
http://support.brainwaregroup.com/kb/article/AA-00702/0/Error%3A-Windows-installation-cannot-continue-because-a-required-driver-could-not-be-installed.html
Also, please try to find out Setup logs from the client computer, and we can see the details in the Setup log:
If the failure occurs in Windows PE before the disk configuration page of the WDS client is completed, you can find the logs at the
X:\Windows\Panther folder. Use Shift+F10 to open a command prompt, and then change the directory to the location.
If the failure occurs in Windows PE after the disk configuration page of the WDS client is completed, you can find the logs on the local disk volume at the
$Windows.~BT\Sources\Panther folder. The local disk volume is usually the drive
C. Use Shift+F10 to open a command prompt, and then change the directory to the location.
Kate Li
TechNet Community Support -
2012R2 Deployment with WDS yields Driver could not be installed error
Hi
I'm using WDS installed on a 2008R2 SP1 server. My boot image is from Windows 2012. When I deploy a Windows 2012
R2 image I recive an error dialog during setup that states "Windows installation cannot continue because a required driver could not be installed." In checking the setupact.log file it appears as though setup can't find pkgmgr.exe.
If I use the boot image from 2012 R2 then it works fine. I want to continue using my existing boot image from 2012. Any thoughts on why this is failing?
Setupact.log excerpt:
2014-02-12 06:55:33, Info [0x0a0023] UI progress task ProgressInfo\InstallingDrivers : StartProgress
2014-02-12 06:55:33, Info Driver Install:=============================================
2014-02-12 06:55:33, Info Driver Install: Driver Path: [\\167.68.251.22\REMINST\Stores\Drivers\vmxnet3ndis6.inf_x64_{E58F290F-F1A5-486A-BF8C-2A97B42FF9F8}\vmxnet3ndis6.inf]
2014-02-12 06:55:33, Info Driver Install: Attempting driver install.
2014-02-12 06:55:33, Info Driver Install: Driver Arch: [9]
2014-02-12 06:55:33, Info Driver Install: Driver Root: [D:\WINDOWS]
2014-02-12 06:55:33, Info Driver Install: Driver Drive: [D:\]
2014-02-12 06:55:33, Info CSI 00000001 Shim considered [l:256{128}]"\??\D:\WINDOWS\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.3.9600.16384_none_fa1dc1539b4180d8\pkgmgr.exe"
: got STATUS_OBJECT_PATH_NOT_FOUND
2014-02-12 06:55:33, Info CSI 00000002 Shim considered [l:250{125}]"\??\D:\WINDOWS\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.3.9600.16384_none_fa1dc1539b4180d8\pkgmgr.exe"
: got STATUS_OBJECT_NAME_NOT_FOUND
2014-02-12 06:55:33, Info CSI 00000003 Shim considered [l:236{118}]"\??\x:\sources\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.3.9600.16384_none_fa1dc1539b4180d8\pkgmgr.exe"
: got STATUS_OBJECT_PATH_NOT_FOUND
2014-02-12 06:55:33, Info CSI 00000004 Shim considered [l:236{118}]"\??\x:\sources\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.3.9600.16384_none_fa1dc1539b4180d8\pkgmgr.exe"
: got STATUS_OBJECT_PATH_NOT_FOUND
2014-02-12 06:55:33, Info CSI 00000005 Shim considered [l:112{56}]"\??\D:\WINDOWS\Servicing\6.3.9600.16384_amd64\pkgmgr.exe" :
got STATUS_OBJECT_PATH_NOT_FOUND
2014-02-12 06:55:33, Info CSI 00000006 Shim considered [l:106{53}]"\??\D:\WINDOWS\WinSxS\6.3.9600.16384_amd64\pkgmgr.exe" : got
STATUS_OBJECT_PATH_NOT_FOUND
2014-02-12 06:55:33, Info CSI 00000007 Shim considered [l:92{46}]"\??\x:\sources\6.3.9600.16384_amd64\pkgmgr.exe" : got STATUS_OBJECT_PATH_NOT_FOUND
2014-02-12 06:55:33, Info CSI 00000008 Shim considered [l:92{46}]"\??\x:\sources\6.3.9600.16384_amd64\pkgmgr.exe" : got STATUS_OBJECT_PATH_NOT_FOUND
2014-02-12 06:55:33, Error CSI 00000009 (F) HRESULT_FROM_WIN32(ERROR_PATH_NOT_FOUND) #1# from SssBindServicingStackParams={cb=00000040, flags=00000214,
image={cb=00000010, flags=00000000, pcwszWindir=[10]"D:\WINDOWS"}} Cookie=(inner-null), Disp=1[gle=0x80070003]
2014-02-12 06:55:33, Error CSI
0000000a@2014/2/12:14:55:33.601 (F) base\wcp\shim\binder.cpp(624): Error HRESULT_FROM_WIN32(ERROR_PATH_NOT_FOUND) originated in function SssBindServicingStack expression: (pInputParameters->dwFlags &
(0x00000020))
[gle=0x80004005]
2014-02-12 06:55:33, Info Driver Install: Driver Flags: [1]
2014-02-12 06:55:33, Info Driver Install: Driver State: [5]
2014-02-12 06:55:33, Info Driver Install: Driver Size: [10823664]
2014-02-12 06:55:33, Info Driver Install: Driver Dest: []
2014-02-12 06:55:33, Info Driver Install: Driver Result: [0x80070003]
2014-02-12 06:55:33, Info [0x0603b2] IBS CallBack_InstallDriversOffline:Install Return [0x80070003]
2014-02-12 06:55:33, Info [0x0a0024] UI progress task ProgressInfo\InstallingDrivers : EndProgress
2014-02-12 06:55:33, Error [0x0b00ae] WDS CallBack_WdsClient_OfflineDriverInjectionEvents: Problem processing offline driver package injection event. Error code [0x80070057].
2014-02-12 06:55:33, Info [0x0640ae] IBSLIB PublishMessage: Publishing message [Windows installation cannot continue because a required driver could not be installed.]
2014-02-12 06:55:33, Info [0x0a013d] UI Accepting Cancel. Exiting Page Progress.Hi,
The WinPE version is 4.0 in using boot image on Windows Server 2012, which does not support deploy Windows 8.1/2012 R2.
You should use WinPE 5.0 (from Windows Server 2012 R2) as you just tested.
If you have any feedback on our support, please send to [email protected] -
Custom Afaria Client not getting installed on IOS devices
Hello,
I am using Afaria SP4 in my organization with no hotfix applied
I have created a custom Afaria Client App for IOS devices.
I am succesfully able to enroll my IOS devices and install the custom app during enrollment,when i am trying to hit the system tenant.
However,when i am trying to hit manually created tenants,enrollment is
done and also the device is under MDM control,but custom Afaria client app is not getting installed during enrollment.
I have attached the screenshot of the page where i have uploaded the ios afaria application in Afaria console.
The error that i can see in the icu logs while enrolling ios device in manually created tenant is as follows-
"The manifest for the app at
http://65.240.141.130:23003/ps2/ps.svc/Package/Content/0435A04B083AB0E663FE410BBFE7238D31E6B113/7de2f89d-6cdf-458d-a68c-0bb72e616c68/3/Virt.Def.App.plist
could not be validated"
Please guide to resolve the issue.
thanks and regards,
Jigar SalechaI'm quite sure you need to set this up per tenant. Have you tried to upload the custom client to each tenant ?
BR
Peter -
Reg: 0PUR_C01 - Update Rule - Not Getting Installed
Dear friends
I am trying to activate MM Cube (0PUR_C01)
But when collecting dependent objects for 0PUR_C01 with data flow before option, Once collection over, system throws the following message
1. Object 0DB87SIC1 (InfoObject,IOBJ) could not be collected for object 0PUR_C01 (InfoCube,CUBE)
2. Object 0DBGUDUNS (InfoObject,IOBJ) could not be collected for object 0PUR_C01 (InfoCube,CUBE)
3. Object '0DB87SIC1' (IOBJ) of type 'InfoObject' is not available in version 'D'
4. Object '0DBGUDUNS' (IOBJ) of type 'InfoObject' is not available in version 'D'
And also, I could able to see the following long text error message.
1. You have collected objects in the BI Metadata Repository. Associated objects for object 0PUR_C01 of type InfoCube, CUBE have also been collected. Object 0DB87SIC1 of type InfoObject,IOBJ was among these objects
2. However, this object 0DB87SIC1 of type InfoObject,IOBJ is not available in the metadata repository
3. If this error occurs while you are installing BI Content, an error may have occurred during the delivery. Inform SAP. In all other cases, check that the object has not been deleted by another user during collection.
I tried to install those collected objects, the cube alone gets installed and visible in workbench. Update Rules are not getting installed. Even after,I have collected the update rule separately and tried to install lot of times, no luck for me
eventhough the job has been successful
If anybody came across this type errors, Please guide me to solve that
Points will be awarded for the right answers.
Regards
Raju Saravananhi raju
1. Object 0DB87SIC1 (InfoObject,IOBJ) could not be collected for object 0PUR_C01 (InfoCube,CUBE)
2. Object 0DBGUDUNS (InfoObject,IOBJ) could not be collected for object 0PUR_C01 (InfoCube,CUBE)
3. Object '0DB87SIC1' (IOBJ) of type 'InfoObject' is not available in version 'D'
4. Object '0DBGUDUNS' (IOBJ) of type 'InfoObject' is not available in version 'D'
u just ignore this errors and install. this wont affect.
u just try again colllecting the cube and collect it "befroe and after"
u wld get the update rules for the following datasources
2LIS_02_ITM
2LIS_02_S012
2LIS_02_SCL
Regards
Dina -
Update rules not getting installed from business content.
Hello,
One more major issue I am seeing is that my update rules for some cubes (0PUR_C01)are not getting installed at all from business content and the errors i am getting are like datasource 0vendor_text not maintained and then there is long list of such red lights. when actually I can see most of the datasources active in the datasource tab on BW side.
So i dont know how to get these update rules working.
Please advice,
ThanksHi Mukund,
please see also the answer that I provided to your thread
<a href="https://forums.sdn.sap.com/thread.jspa?threadID=121274&tstart=0">Strategy toward new and 3.x datasource / infosource</a>
In addtion, you might want to check
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/84/497e4ec079584ca36b8edba0ea9495/content.htm">help.sap.com DataWarehouse</a>
and the online documentation for more general information about data modeling / acquisition.
Cheers
SAP NetWeaver 2004s Ramp-Up BI Back Office Team -
Can dld newer versions of Frfx but they are not getting installed?
I am able to dld newer versions of firefox but they are not getting installed ... Currently 'about firefox' shows my version to be 27.0.1 but when I go into the troubleshooting option it shows I have version 28.0 and 29.0 in my update history. Please advise. Thanks
Hi Irishman,
Have a go at the suggestions that follow and then post back with how you get on.
Obviously I have seen your post, and sorry you are having problems. Unfortunately this is likely to be because you did not take enough care on the Internet. It is all too easy to go to bad websites and pick up malware that once downloaded does things you may not like or expect.
<u>Explanation </u><br />
'''This is not anything to do with Mozilla Firefox''', other than it is the browser in use. Such software is not bundled with or downloaded with Firefox installs or upgrades. <br /> ( You may get an option of thumbnails in otherwise blank spaces in newtabs in a version of Firefox later this year but that is a different subject)
Finding such adware may be problematic, after all it is either downright malware which will try its best to evade being found and uninstalled, or it is adware that a minority of people actually like and deliberately download and install, usually after clicking small print saying this will happen.
<u>Suggestions to try to Uninstall or Remove Adware</u>
First thing to try, check which search engine is selected ? <br /> Because this is so simple and could have an effect it is worth checking what Search engine is selected for the Firefox Searchbar. You may have changed that, or software may have,and that will affect other searches including those from the address bar and the start page. All you need to do is click the little downward pointing arrowhead in the search bar and check what is in use and what is available. In most countries Firefox uses Google by default.
Check the shortcut Icons - has an address been added ? <br> Right click the icon on the desktop used to start Firefox has an address been tacked on to the end of that. If something has changed that Firefox goes to that address as it starts up. For comparison use a run command directly. In Windows & with Firefox not already open Use keyboard shortcut Winkey+Run then when you get the run option key in ''firefox.exe'' & hit return. That will run Firefox without any extra instruction.
Adware removal<br />
I you have got adware, or unwanted software especially if it also affects other browsers (So check the use of Internet Explorer) look for anything unexpected installed in the Windows OS, use the Windows Control Panel. especially if only Firefox is affected check what is installed as extensions and plugins by using the addons manager.
* USE '''New button -> Addons ''' <br /> Or navigate to ''about:addons'' ,by keying that into the addressbar
* Also see
** [[Remove a toolbar that has taken over your Firefox search or home page]]
**And this slightly dated article [[What to do when searches take you to the wrong search website]]
I will make a follow on post detailing malware removal steps. Note it is important to use up to date and multiple tools, not just your one favourite. No single tool detects everything. This one is particularly useful with adware problems
* * '''[http://www.bleepingcomputer.com/download/adwcleaner/ AdwCleaner: (for adware)]''' -
Pro*COBOL not getting instaled on Fedora 14
Hi,
I have installed Oracle 11gr2 on Fedora 14 x86_64 system,. But the Pro*COBOL pre compiler which automatically comes with Oracle is not getting installed (Instead Proc is available. I dont know why). I have the entire application coded in embeded SQL-COBOL programs. I am stuck here, unable to preprocess my programs.
Please suggest me the procedure to resolve. Thanks in advance.
Note: In "Advanced Install" option I could not find "custom instal"l or a provision to select "precompilers" but other DBA related things found
Venkatesh Kudire
[email protected]David,
Can you try passing in the 1.5 VM location manually as listed below
WorkshopInstaller.exe LAX_VM d:\bea\9server\jdk150_04\bin\java.exe
Can you also make sure that the 1.5 JVM value entry is the first entry in the PATH environment variable.
cheers
Raj -
Hi,
Please help me with the below issue, iam trying to deploy Service pack 1 on Windows 7 , 32 Bit OS
SP1 does not get installed when the machine is set to Japanese Language, software push through sccm 2012 , it does gets installed of installed manually, by remoting into the machine
also it gets installed through sccm when the machine is set to english language,
Thank you
Tanoj
OSLM ENGINEER - SCCM 2007 & 2012Hi Friends,
we are deploying the SP1 via SCCM 2012 , and the success rate is around 50 %, its a Light touch installation where user will initiate the installation via Software Center ( Web based )
i was able to gather few errors , and this are the errors which failed during SP1 Installation 0x800f0828,
some errors which sccm reports display are
11171
10008
10021-
17031 -
1602 - User Cancelled installation
113 - No more internal file identifiers available
10070 - File handle reference is no longer available
10050 - A socket operation encountered a dead network
11170 - The task sequence manager could not successfully complete execution of the task sequence
i could not find the reason for some of the errors, also i am looking for a fix/woraround if any
Also i have noticed that in few computers the task seq failed at a place where after the sp1 installation a reboot happens and then PGP BYPASS utility is uninstalled, it did not start the PGP bypass uninstall after reboot
is there a way to cut short the Task seq and keep it simple ?
right now its like this
1. checking for prerequisite : checks for OS Name and OS version
2. installs PGP Bootgaurd Bypass
3. System Restart
4. Installing Windows 7 Service Pack 1
5. Final Restart
6. uninstall PGP Bootgaurd Bypass
Regards
Tanoj
OSLM ENGINEER - SCCM 2007 & 2012 -
Pdf printer is not get installed while installing adobe acrobat pro 11 in win 7 32 bit
pdf printer is not get installed while installing adobe acrobat pro 11 in win 7 32 bit
BlackCat,
Two things:
1) Acrobat 8 Pro is not Win 7 compatible, no less Win 7 64-bit copmpatible
2) Reader X and Acrobat 8 are not a supported combination. Reader X and Acrobat X is the first Windows combination that is supported by Adobe. Reader X and Acrobat 8 will cause problems.
You are using a brand new 64-bit OS, you need to use an application that is designed to work with it. Acrobat X is the way to go, HOWEVER, there are still growing pains with Acrobat X, Win 7 64-bit, and the latest version of Office.
Maybe you are looking for
-
QT Reference files from QT 6.5.2 won't open in QT 7.1
My QT Reference files created with Avid Xpress Pro 4.6, which used Quicktime 6.5.2, won't open in QT7.1. This is causing me a lot of headaches trying to compress/encode/etc. my older projects. In order to use the newer program to encode these files,
-
Which RFC module/s should I use to access BW tables?
Hello, I am in a proccess of creating an adaptive RFC model in Web Dynpro. I am in a stage where I need to select my RFC modules. My requirement is to access our BW tables. I see many BAPI's and functions under the SAP Business Information Warehous t
-
Concurrent-access logging; best approach
I have a script that runs on multiple machines at once, and I would like to provide some ongoing single source logging of these activities. As a general rule I think the chance of two machines touching the log at once are slim, but when the script co
-
DEQUEUE_E_TABLE is not working
Hi All, We have a locked a Ztable by using the FM "ENQUEUE_E_TABLE" and the in SM12 we can see that the table is locked. We are unlocking the ztable by uing the FM "DEQUEUE_E_TABLE" but when we check in SM12 the loked entery is not unlocked .ca
-
I need help with setting my button to link to my website! URGENT HELP!!!!
Hello everyone. Lately, I've been trying to link a button to my site with Action Script 3, however, whenever I try to load my movie, I keep getting an error! The error says: Scene 1, Layer 'Button', Frame 1, Line 5 1071: Syntax error: expected a defi