Wifi driver not installing for windows7 64 Bit edition

HI
i had replaced my operating system to windows ultimate Bit.
My laptop model no: G580 (20157)
after replacing my operating system all the drivers are installed successfully except network controller & USB 3.0 host controller.
then after i tried to reinstall my driver and installed my driver.but wifi is not working
please help me my wifi driver is installed but not working.i had installed energy management then from shortcut i turn on my wifi but it is not turningon.
and when i searched from CMD promt(c:\netsh wlan show drivers),it gives there is no wifi driver found.
please anyone suggest me wether there is any other driver for this problem....

Hi Slape84,
Welcome to Lenovo Community Forums!
I’m sorry to hear that the Wireless driver is not getting installed in your G580 laptop after re-installing OS (Operating System), I suggest you to check if the Wireless is enabled in BIOS first then try to install the drivers. Below is the steps to access BIOS and check if the Wireless is enabled or not:
To enter BIOS setup utility, press F2 when the Lenovo logo appears on the screen while the computer is starting up.
NOTE: To check how the BIOS menu looks and to explore its options click here.
Now select “Configuration” Tab and enable the “Wireless LAN Support” by clicking on Enter Key when you are on the option.
Then Click on “F10” Key and then YES to save the changes that are done in BIOS, the computer will automatically restart.
Now check installing the Wireless driver in the computer, but and while installing while installing the driver right click on the downloaded file and select “Run as administrator” option to get it installed without any error.
NOTE: Please click on "Select Product" then in "QUICK PATH" enter the model no. as G580 select the exact model.
Support Drivers & Software downloads
Do post us back if the issue still persists.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

Wifi driver not installing

Hello , i tried to install all drivers of wifi for hp 15-ab032tx but it is not installing and working too.I am using windows 8 64 bit dos.how to fix the problem ?

Take a look on the bottom of your notebook for the label with many icons. There should be a description of the wifi as a radio model that gives the brand and model. Yoou can also use the Device Manager and right click the network adapter without driver. Click on properties. Post the hardware ids PCI\VEN character string here in your thread.

TCP / IP Protocol Driver - not installed (using Windows 7 Home Premium (64 bit) Service Pack 1

I am using a ThinkPad T520 laptop. Lenovo Solutions Center keeps referring me (with a yellow exclamation mark) to the Device Manager and alerting me to a "non-critical" error. The message is "TCP / IP Protocol Driver - not installed".
I have found numerous pieces of advice for Windows XP and Vista - but very little for Windows 7. I have however tried the Microsoft "Fix it" solution and it had no effect.
I am still able to connect to the internet via Ethernet cable and wifi. It is however worrying that the warning keeps being raised.
Does anyone know how I can fix it?

Hi Tripplec.
Thanks for the reply. I am away from home at present without my ThinkPad, so will try it at the weekend. I am an experienced computer user but this is a brand new machine and I have never had a laptop that produced error messages without providing any suggested fixes. It seems that Lenovo is not suitable for ordinary home users, but only for computer engineers. Sadly that is not me... so before I plunge in, can I just check some details?
1. You suggest removing the offending network adapters in device manager. Which are the offending adapters that cause a TCP/IP protocol driver error? I am nervous of removing the wrong things and making it worse!
2. You also suggest that I go to Network Connections via Control panel, properties of adapter, Install and select the desired Protocol(s) and install them. Is that an alternative fix to 1 above - or an essential follow-on after removing the offending adapters? (Last week I searched the machine and the Lenovo support page of drivers - and never found a TCP/IP protocol driver. If you know where one can be found, I would prefer to instal a new driver, rather than delete other devices and hope that the machine reinstalls them later!).
Much obliged for your assistance.
Fillet

I replaced optical drive, now MacBookPro is very hot and wifi hardware not installed

My late 2008 MacBookPro 5,1 2.53 GHz laptop's optical drive would not record last week. A lens cleaning didn't help, so I replaced the optical drive Tuesday evening with iFixit instructions. Other than stripping one of the screws holding the drive in place, all seemed pretty straightforward. I had to disconnect the camera cable to get the drive out but replaced it. After putting everything back together, the new drive seemed to burn discs well and everything (including the camera) worked perfectly.
Last night I came home to the laptop, which, as usual, was sleeping and connected to the AC adapter. Not as usual, it was really hot. I restarted it and when it rebooted the wifi icon had an x in it and said wifi:hardware not installed.
I reset the PRAM and the SMC. No luck.
I have an appointment to take it to a genius bar tomorrow afternoon, but what could I have done without realizing it?
Thanks for any suggestions (I have been working on Mac desktops and laptops for a number of years...this is the first time anything like this has happened to me...)

That is true. I cannot think of any way to test the Optical Drive without swapping it into a known correctly operating MBP.
A thought which probably may not be an issue. When I installed an Optical Drive in my old (2006) MBP, I remember seeing in the instruction manual an item called a grounding pad (which looked like a tiny steel brillo pad with out soap) which was missing in mine. The MBP worked and I essentially ignored it. Perhaps that may not be case with your situation.
My thoughts are that the Optical Drive is malfunctioning and the cause of your problem. Perhaps you should consider getting a new replacement from OWC. But that entails a $100 risk with no guarantees of success.
Ciao.

My Mac air keeps on loosing wifi and when I want to switch it on! It says wifi hardware not installed. After about 5 minutes the wifi is back on, but only for about 10 minutes before loosing signal again.

My Mac air keeps on loosing wifi and when I want to switch it on it says "wifi hardware not installed" After about 5 minutes the wifi is back on, but only for about 10 minutes before loosing signal again. This is really frustrating.

I am also having the same problem.. Its too much annoying and its unfortunate nobody at apple support has anyclue of what is happening?
... This is happening almost most of the time keeping my phone down most of the times.

Satelite L30-114: Driver Not Intended For This Platform when IDE controller installing

HEllo! I have Satelite L30-114 which i purchase about month ago.I have Win XP SP2 with all updates, and bios 2.3.
Couple days ago i tried to reinstall drivers for ide controllers. I have delited them in "device manager" and restart system. after boot windows normally found both PCI IDE controllers, installed them, then found ide channels (primary and secondary ide channal on ich) and here strange thing happens: instead of normal installation of these 4 channels the window appears "Driver Not Intended For This Platform". and after every reboot these devices trying to install, giving me 4 windows "Driver Not Intended For This Platform".
Now in device manager i have 2 normal standart IDE Controllers, and 4 don't working IDE channels with yelow "!". The funniest is that i was not installing new ide drivers.Drivers are same that was working before reinstall. Now computer working, but worth than before. on the toshiba site there is no Ide driver "Intended For This Platform".
Did somebody know how can i fix it? or where is such driver located? or what model of chipset whith this controller used in this notebook?

Hello
In my opinion there was no reason to do something like that. If notebook works well let it go. Go to Toshiba download page and download chipset driver for your notebook model and install it manually.

Hp Officejet Pro 8600 on Windows 8.1 driver not installed

Using Windows 8.1 and HP Officejet pro 8600. The printer is installed on a wireless network. But on Device Manager, it says "driver not installed". Most printing tasks are successful, but for some I need to have the driver installed on the computer. I have tried troubleshooting, but am unsuccessful. I would appreciate help. Thanks

Hi emax,
Print a configuration page to get the printer's IP address. Printing a Network Configuration Page.
If you have a valid IP address for the printer then try and access the Embedded Web Server for the printer.
Type the IP address into your web browser's address bar. (Internet Explorer)
If it loads the printer's network page then the printer is on the network.
Power cycle the router, computer and printer.
Try printing again.
If the issue persists, add a new device if the IP address is valid.
Right-click the Start button () or the lower left corner of the screen, and then click Search.
In the Search box, type HP, and then click the icon for your printer. The printer software opens.
Click Utilities, and then click Printer Setup & Software Selection.
Click Connect a new printer.
Test the printer over the wireless network.
Please provide the following information so I can assist you better.
What is the printer's first 3 sets of numbers for the IPV4 address?
Could you access the printer's EWS?
Were you able to add a new device?
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Problems adding USB printer - "Driver not installed" - but it is

Apparently, 10.3.9 has some problems with USB printers. For the record, I had already installed this earlier prior to the upgrade and everything worked fine - but due to crashing due to a faulty power supply - I've had to re-configure everything.
I, and many others in this forum, have found a strange problem when trying to add a printer (And yes, other people have asked about this but I haven't seen any answers at all that are useful. The only possible solution seems to be "upgrade to 10.4" and that is unacceptable. Does Apple check these forums?).
After clicking "add printer" in the utility, the software finds the correct printer (so obviously the physical connection to the printer is OK) and displays it with a question mark over it's icon and "driver not installed" next to it. I can't select this image or text.
After searching for a couple of minutes, a dialogue box pops up saying "New drivers detected. Do you want to reload the browser?" (I assume the printer setup utility is the "browser"?).
I click yes and nothing happens. No PPDs show up in the list. This happens when I select USB as well as Apple Talk from the printer-type pull-down menu.
How can I start printing again?
iMac G5 17" Mac OS X (10.3.9)
iMac G5 17" Mac OS X (10.3.9)
iMac G5 17" Mac OS X (10.3.9)
iMac G5 17" Mac OS X (10.3.9)
iMac G5 17" Mac OS X (10.3.9)

First, welcome to the discussions.
For the record, Apple does not normally respond to these Forums.
You mention (Due to Crashing) Whenever you have an issue with your machine it can disrupt in almost any area, and is normally caused by SOMETHING.
As of right now it would appear you might be chasing your tail.
When you choose to upgrade your Operating System there is No Guarantee that your Printer and it's drivers will work on another completely different Operating System.
Your best bet at this point is to drag all of your printer related folders to the trash, empty your trash, and plug your USB Printer (What KIND) into your machine directly.
Shut your machine clear OFF for a minute or so and do the same to your printer, pull the power adapter from it.
Now plug in your printers Power Adapter, Plug in the USB to your Printer to your computer and restart it.
Take the Disc that came with your printer and re insert it and download the Installation Folder and any utility folder that may come with it.
After you have done this don't try to print, Go directly to your Printer Manufactures Web site and search for the latest updates to your printer and the Operating System you are using.
These will more often than not download to your desktop.
You must drag these to the setup folder and or the utilities folder and then double click them to launch them. after you have completed this your printer should work.
One other thing, If you have Classic and or OS9 on your machine you might have to do the same for OS9 Applications , and Utilities for it to print in Classic. Don

'ROracle' is not installed for 'arch = i386'

Successfully downloaded ROracle_1.1-11.zip and installed as local zip file.
But got below error when loading:
> library(ROracle)
Error: package ‘ROracle’ is not installed for 'arch = i386'
Any idea what might be wrong?
With Windows 7, 32-bit, Intel Core i5.

The ROracle for Windows package on OTN, ROracle_1.1-11.zip, is for Windows 64-bit. For 32-bit systems, you'll need to rebuild the package from source.
Refer to the ROracle INSTALL file for information on compiling ROracle for Windows 32-bit. Keep in mind that Oracle R Enterprise is supported on 64-bit systems,
so if you plan on using ORE you'll need to install on a 64-bit machine.
Sherry

PSE Backup wouldn't work: "CD device driver not installed; install PSE" didn't fix problem; Win7

I'm trying to backup by photos for the first time! in Photoshop 5.0 on a Windows 7 system. I get to "Full Backup" option, and get a pop-up that says "CD device driver not installed; reinstall PSE". I put my PSE disk into my computer, select "Repair... installs... missing files"; PSE re-installs, but I get the same message again when I try to backup. How do I find a CD device driver? (My DVD is formatted, but PSE can't find it.)

I just found a photoshop elements 5.0.2 update "patcher" and installed it. The install was successful but I still got the same message saying "CD device driver not installed". Might there be a problem since I'm now on Windows 7 and no longer on XP? I have no need to buy a newer version since Elements 5.0 does everything I need to do. Any other suggestions?

ITUNES 10.6 is not installing for windows 7

ITUNES 10.6 is not installing for windows 7;

Thasnk y.ou I just got my laptop and didnt get why the itunes icon wasnt popping up on my pc and i was getting no further qustions like i did when i installed it on my work computer. Well thanks again Up The Iron's Iron Maiden Rules

How to deal with the "driver not installed" message?

My issue, and it seems many others here have it too, is how to install a printer driver in the face of the "driver not installed" message.
In my case, it's an HP4160 Rendevous printer. I've deleted the com.apple.print files in the Library, reinstalled the software, made sure that BDC package, or whatever it's called is installed, even downloaded and run the printer fix software from Fixamac.
Nothing works.
I have the feeling this isn't a printer or driver-specific issue, but is an OS problem. Does anyone have a suggestion?

It appears the Deskjet 4160 will not work with an Airport. Connected via USB, the driver installs normally and the the printer appears to run just fine, although I haven't done much with it yet.
It simply will not work on a wireless network through an Airport. Frustrating, but workable by bringing the laptop to the printer.

HT2305 I have Widows 8 but my Itunes wont open I keep getting a message "Itunes software does not install on 64 bit operating system"

I have a Widows 8 laptop. I cant open Itunes. I get a message "Itunes software does not install on 64 bit operating system" Can anyone tell me how to get it installed?

If you are referring to Vista Support, It may be after the new year before it fully supports vista. I have not upgraded to vista yet but I was thinking about it!

I uninstalled Firefox and not it will not install for me. I get a error that says, The item referred to by this shortcut cannot be accessed. You may not have the appropriate permissions. What can I do?

I uninstalled Firefox and not it will not install for me. I get a error that says, The item referred to by this shortcut cannot be accessed. You may not have the appropriate permissions. What can I do?

Here is a pic.

When I installed my CS5 suite I chose to not install Photoshop 32 bit can I later?

When I installed my CS5 suite I chose to not install Photoshop 32 bit can I later without installing the whole suite ?

Mylenium,
I don't think your answer was 100% correct, when I installed the suite I was able to select Photoshop 32 bit and say do not install this program so there is a selective install process, I could have said no to many of the programs by right clicking on each one and chose "do not install"
So if I put my disks back in and the same menu comes up all I have to do is say no to all but Photoshop 32 bit and I can install just that one program.
So one of us is incorrect, whcih one of us is it??

Wifi driver not installing for windows7 64 Bit edition

Similar Messages

Maybe you are looking for